Personal Keyboard settings

Hey got a problem got a mac with a u.s. keyboard but i also need some special letter on it like ä,ö,ü would like to keep using the u.s settings, and integrate those special characters, e.g control + a = ä ; is it possible to customize it in some way couldnt find anything. Thx

Go to "International" in the System Preferences to Input Menu and check US and check German (Deutsch) and at the bottom of the pane: Check the Show Input Menu in Menu Bar.
You may then change the input source between keyboard settings right from the menu bar according to which you want at the moment.
ps sorry meant to edit the original answer, not to double post.
Message was edited by: Rhyd

Similar Messages

I have 2 iPhones (1 personal, 1 business) but use the same Apple ID. I have replaced my personal iPhone but it has restored to my work iPhone. How do I restore it to my personal iPhone settings?

I have 2 iPhones (1 personal, 1 business) but use the same Apple ID. I have replaced my personal iPhone but it has restored to my work iPhone settings (photos/contacts/messages etc.) How do I restore it to my personal iPhone settings?

You're welcome.
First check to be sure the new phone is running the same or higher version of iOS as the one you backed up (Settings>General>About>Version). If it isn't, you'll need to update the iOS first. Then go to Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens on the phone and when given the options, choose Restore from iCloud backup and follow the prompts, choosing the backup of your personal phone to restore to.
Be sure the phone is connected to wifi and your charger while it is restoring the backup.

Keyboard settings in Java Studio Creator

I am using Solaris 10, Swedish installation. All programs exept Java Studio Creator 2 Update 1 is Swedish. The Creator is in English. Every program so far, exept Java Studio Creator, uses the Swedish keyboard settings.
When using Java Studio Creator, I am missing brackets "[" and "]" which turns into "8" and "9",
How do I configure Java Studio Creator to use my Swedish keyboard settings?
Thanks in advance!

I have not tried it, but perhaps this article might help.
http://developers.sun.com/jscreator/learning/tutorials/2/internationalizingapps.html

Keyboard Settings button disabled

On opening Region and Language > Input Sources, the wrench button is disabled. I can't figure out which package is needed to select that option despite searching around.
Attached screenshot below.
Anyone else ran into this on a fresh arch install with the gnome 3.6.2 package?
--V
Last edited by vellvisher (2013-04-01 18:15:04)

Yup! Have that installed..(thanks for the reply though!)
If I remember correctly, in Ubuntu, this brought up a screen to change the caps-lock key behaviour to esc, etc...I already used dconf to map it, I am sure that there is something wrong with my keyboard settings.
(Possibly) related problem using "Custom Shortcuts" to map "gnome-terminal" to "Ctrl+Alt+T", stops working on reboots until I redefine the key.
Last edited by vellvisher (2013-03-31 06:24:44)

My keyboard settings got messed up. I hit something, then heard a loud ding.

My keyboard settings got messed up. I hit something, heard a loud ding; after restarting I can't log in because the enter key appears to add a character instead of a Return. How can I fix the keyboard if I can't log in to get to my settings??

Is there a way I can enter system preferences from the start up screen or in safe mode?

Personal configuration settings in c5

Can anyone please tell how to setup personal configuration settings in my c5.?I cant see any options under my phones configuration settings please helpp.

Goto connection settings on your phone. There will be to add a personal configuration settings.

Client based GWI - "Contact Person Sync settings"

Dear CRM guru's,
We are using CRM 2007 SP 2 and client based Groupware synchronization. The application version of the GWI synchronization is 3.035. In Outlook "SAP CRM Calendar synchronization settings">sync tab>"Contact person Sync settings" section, I see 2 check boxes for "Contacts of accounts where user belongs to account team" and "Delete account on contact deletions when no other contact exists". Can you please tell me what is the significance of these 2 check boxes. Is there a way I can default these 2 checkboxes, disable them distribute to the users and make the end user not able to change these 2 check box selections. Appreciate your help here.
P.S : I believe these options were not there in the previous version 3.027. Can I use the 3.027 application with CRM 2007 SP2 for GWI synchronization?
Thanks!
Vivek.

Hi,
There is a way to do it, but you need to migrate to latest groupware integration version 8.014,. There all properties in client are combined in a form of profile, which can be automatically downloaded to each client.
It also automatically detect that if there is any new version of update in profile,and download the latest.
If you do not want to upgrade, you can check which registry field is controlling the UI for those 2 properties, which you can set or reset.
You can see all properties at location "HKEY_CURRENT_USER\Software\SAP\CRMCalIntegration\SyncSettings"
And export the desired reg file to end user.
Best Regards
Ashish Rawat

6267 problem with personal config. settings

Please i need some help. I have an unlocked nokia model 6267 i bought it in a nokia store in Mexico City. I use this phone with 2 operators. Yesterday i erased my configuration settings i had with one of this operators because i had a problem connecting with EDGE so i can configurate them again.
The problem now is that when i try to configure any of the personal configutation settings (web, mms, access point, etc) i only receive the message:
"Cannot add new account. Memory full"
Of course i have to say that my phone memory is not full. I have 22 MB free.
Someone plz can help me with this problem.
Thanks

You've checked with the carrier and they offer it, are you provisioned by them to use it?
Troubleshooting hospot http://support.apple.com/kb/TS2756
understanding hotspot http://support.apple.com/kb/HT4517

Wrong keyboard settings at login prompt

So I have a German (qwertz) keyboard and both the tty and KDE know that. Only the graphical login prompt thinks I have a US (qwerty) keyboard: To log in, I have to enter my username and password the way I would enter it into a US keyboard.
The wiki tells me KDM is responsible for the login prompt and the X server is responsible for KDM's keyboard settings. This would explain why it works in the terminal (which is independent of X) and in KDE (which presumably overrides X settings), right? But how do I change the keyboard layout that X thinks I have without changing xorg.conf, which is auto-generated by Catalyst? Or do I need to change something else for the login prompt to get the correct keymap?
Last edited by Mithlond (2011-11-03 16:02:18)

https://wiki.archlinux.org/index.php/Xo … t-Plugging
Instead of changing the xorg.conf file, you can create a /etc/X11/xorg.conf.d/30-keyboard.conf to change the keyboard layout.
Mine for the french azerty layout is like that:
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "fr"
EndSection

Is it possible to pre-configure the iPad keyboard settings using Apple Configurator or iPhone Configuration Utilitity?

I have to configure 20+ iPads for events that are sometimes in French, sometimes in English, sometimes both. It is important that I can preset the keyboard settings to allow multiple languages (for example). I've been looking in Apple Configurator and iPhone Configuration Utility, and I can't find where I can set that kind of settings during deployment.
Is there a way I can manage all the settings of the iPads without having to go through each iPad to make sure the settings are ok for my event?

Order Management provides you with the ability to import ATO and PTO configurations from legacy systems or EDI. In your case, you should define the ATO/PTO model first and then import the order and configuration selections from the EDI.
The order import will let you create an Order even if the selections are invalid.
You should then programmatic book and progress the order (using Order actions api).
If the configuration is valid, then the API will generate a * number (ATO item), create bom/routing as appropriate and place that item on the sales order.
If the configuration is invalid, it won't let you book the order. Once you have fixed the invalid selections/configurations, you will be able to book and progress the order.
See http://download.oracle.com/docs/cd/A89549_01/acrobat/115omapi.pdf for details.
Also refer to the "Importing Configurations" section in Oracle Order Management Suite White Papers [ID 113492.1]
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant

Wrong keyboard settings at start up

Hello,
A while ago I did a Migration from a TM back-up to a new computer.
The source had AZERTY keyboard settings, the destination QWERTY, because I went from azerty to qwerty, obviously.
Now, the problem is that when I do a cold boot or reboot, the log in screen is standard set to AZERTY instead of QWERTY (that's how the system is set)
When I put my MBP in Sleep Mode and try to log in afterwards, everything's fine. I'm able to type in QWERTY.
So how do I change these settings to ALL qwerty, for simplicity?
Thanks!

Hi 1tio1,
Welcome to the Apple Support Communities!
I understand that your preferred keyboard layout is not what is expected on start-up. In this situation, I would recommend reading over and working through the steps in the following attached article. Please let me know if the issue continues.
OS X: How to change the keyboard layout at the login window - Apple Support
From the Apple menu, choose System Preferences.
Click Users & Groups to display the pane (or choose User & Groups from the View menu).
If the lock icon in the lower-left corner of the window is closed, click it, then enter the name and password of an administrator to unlock it.
Click Login Options.
Select the "Show Input menu in login window" checkbox.
From the Apple menu, choose Log Out.
At the login window, click the Input menu (shows the name of the currently selected input source next to a keyboard icon) in the upper-right corner of the screen, then select the desired input source or keyboard layout. If you don't see the input source you are looking for, move the pointer over Other Input Sources, then select the input source from the complete list that appears.
Best regards,
Joe

Path to Custom Keyboard settings

Could someone point me in the direction of the Custom Keyboard settings path (in Explorer) please.
I can find the path to the Installed options for these but not the path to my custom ones in CS5.5
I actually have them on a usb stick but I need to know where to put them in CS6.
Darn...I used to know this!

Thank you Ninja.
Actually I was trolling around and lucked up on it a few minutes ago.
I was so delighted that I did not take any notice of where I actually was and after copying my Custom Keyboard file across to CS6..I realised I had not taken note of where I was!
I have written it down from your post.
Will ask you again when CS7 comes around.

Back up has caused my work iPhone to revert to my personal iPhone settings? I have no work email or contact information now.

I just backed up my work iPhone after upgrading to the new software. Unfortunately, my work phone has no reverted to my personal iPhone settings and I no longer have access to my work email or contacts.
Can I reverse this somehow?
Thanks,
Andrew

Only if you have a backup of your work email.
then go to settings - general - reset - erase all contents and settings - after the restore use your work backup.
If you don't have a backup, you will need to restore as new and then set up your work email.

Avid keyboard settings in Premiere 6

I am trying to use the Avid keyboard settings in Premiere 6. I have gotten a few to work, but some, particularly CUT, command X, is not working. I have tried this on a two machines on different sequences.
Has anyone had any success using the Avid keyboard settings?

I have been struggling with this for a few days now, working around the fact that I could not get a keystroke to "cut".
With some help from fellow editors, I think I have figured this out.
My mistake was thinking that "cut" (command X) under the file menu should actually do something on the timeline. It does not. What you really want is to program "extract" as a keyboard stroke. On Avid, it is "x". On Premiere, it is the apostrophe. I am guessing that "cut" applies to text on clips or bins, not editing on the timeline. What is even more confusing is that the other commands under the "edit" menu (copy, paste, paste insert) work on the timeline. Not very logical in my opinion.
Hope this helps someone else struggling with this problem.

Keyboard settings, MAJOR HELP NEEDED QUICK!!!

Ok all my keyboard settings are messed up, I can't use my volume control and I can't changes the brightness, etc. (Basically all the command functions!?!?!) (new to macs) anyways F12 which is volume up control now opens my dashboard and so forth, ok now for the seriously messed up part the default settings button doesn't work everything just stays the same...
Can someone post all the default max osx settings or rather help me please?!?!
Message was edited by: M.Mercer

Open System Preferences, go to keyboard and mouse, choose the keyboard tab, and make sure the box beside "use all F1, F2, etc. keys as standard function keys" is UNchecked.
Regards

Personal Keyboard settings

Similar Messages

Maybe you are looking for