Personal No. Name in IW37N or IW49N report required

Dear Expert,
When execute the transaction IW37N and get the operation wise order report, I am getting personal no. for that perticular operation in a order. Now, the requirement is that report should display the Personal No. with Name (PA0001 - ENAME). Can you suggest me how to add the ENAME for the personal nos. in a report of the iw37n & iw49n transaction report.
Regards,
Tushar

I'm not sure if the Enhancement Framework is available in ECC5 ???
If not, then you'll need to copy the program to a "Z" program and make the changes as required.
PeteA

Similar Messages

Problem with iWeb after associating a personal domain name with my MobileMe

I think I did this by the book. I associated my personal domain name with my MobileMe account, then changed the CName pointer at GoDaddy to MobileMe (MM), then went back to MM and hit 'Done'. iWeb now lists my MM account as 'My account name (personal domain name). It took a little while for the DNS pointer to propogate, but now I can go to a browser, type in my personal domain name, and MM delivers my iWeb website as I wanted it to, apparently from my domain, not web.me.com. The problem is, as soon as the DNS propogated, MM delivers my MM site OK, but iWeb can't find the files for it anymore. All my pages immediately went red (unpublished) when I tried to update the site, and any attempt to Publish gives me this error "iWeb couldn’t connect to MobileMe. Make sure your Internet connection works and try again." I'm cable connected to an ADSL router, and Airport connected to a cable router, and neither service has dropped out. I've rebooted, and retried, and the website is up under my own domain, so GoDaddy and MM both got it right. What did I do wrong? Thanks, someone... anyone?

This is now sort of resolved, but not very satisfactorily. One of the trainers at my local Appple Store found an old support issue in the archives going back to 2008, which blamed security settings for update problems. Coincidental with associating MobileMe with my personal domain, I had checked the privacy box and added an ID and PW to the site. That was the problem, not the personal domain, that was preventing iWeb from finding my MM account. Uncheck that box and my site happily updates. Of course, now I have a site that I cannot make private. In this case, not a show-stopper, but disappointing. I have reported it as a bug in the latest version of iWeb. Thanks for your help.

TS2998 Help! My Mac mail uses another person's name in stead of mine in the "from" heading when trying to send e-mail. How can I fix this?

Mac mail started using another person's name instead of mine. In the "From" line it shows someone other than me so the receipient will not know I am sending them an e-mail. HELP!, This is crazy. Is there a fix?

Does this problem happen EVERY time you send an email?
Do you see the wrong FROM entry before you hit the send button? Or does the recipient report seeing another name other than yours?
Do you recognize the incorrect name being shown? Is it something you or someone else using your machine have ever used? Is it a name you have never heard of before?
Go to your SENT folder in Apple Mail. What do you see when you open one of your SENT emails, in the FROM slot? Is the name correct or incorrect?
Also, I don't understand your comment "I noticed it when I try to send a link via e-mail to another person." are you saying that when you paste a link into an email to someone that your name in the FROM field changes? Where are you putting the link, in what place in the email?

When text editing, the tracker has another person's name instead of mine. How to I correct that?

When text editing, the tracker has different person's name instead of mine. How to I correct that? I'm using iMac Intel Core i3, 3.06 GHz, 4G 1333 MH2 DDR3

Does this problem happen EVERY time you send an email?
Do you see the wrong FROM entry before you hit the send button? Or does the recipient report seeing another name other than yours?
Do you recognize the incorrect name being shown? Is it something you or someone else using your machine have ever used? Is it a name you have never heard of before?
Go to your SENT folder in Apple Mail. What do you see when you open one of your SENT emails, in the FROM slot? Is the name correct or incorrect?
Also, I don't understand your comment "I noticed it when I try to send a link via e-mail to another person." are you saying that when you paste a link into an email to someone that your name in the FROM field changes? Where are you putting the link, in what place in the email?

Changing Variant Pop up window name in Portal for BI reports

Hi All,
I have integrated Bex analyzer with portal, from which when i select variant it will open pop window to select options.. here i want to change the pop window name as " sale order report name itself. I have changed the name of the report and it is showing in internet explorer...
when i select variant...im getting Bex internet explorer name, instead of sales order report name.
Please suggest where can i change this settings in portal or BIW level.
Thanks
Pradeep

See if this link helps
http://www.vrusso.com.br/blog/2011/03/unobtrusive-confirm-javascript-replacement-with-jquery-ui-dialog/Effectively you are calling a jQuery dialog box with custom buttons and events. Optionally you can hide the close button(or even the titlebar) and prevent closing the modal window when escape key is pressed.

Multiple Web Sites with Personal Domain Names - Overview

I have read through the last 10 pages of these discussions and have almost worked this out, but I need some help.
Problem:
I want to publish and edit two separate web sites with their own, individual, personal web addresses
from the same user account on the same Mac using iWeb '08 (2.0.2) and my .Mac account
_So far:_
I have purchased and registered the two domain names (with Cheap-DomainRegistration.com)
I have configured the CNAME to point to web.mac.com, and "Set up a Personal Domain" in iWeb successfully, but using a separate Mac for each web site.
The two sites work great.
_What (I think) I need to know:_
(excuse me for copying these posts out, but I can't find a way to link them to this post)
1) Should I be using iWebSites as suggested by Old Toad (posted Jan 24 in response to StAnNe's "Multiple Websites--HELP!!!")?
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
2) Should I be using Mireille's approach (also posted Jan 24 in response to StAnNe's "Multiple Websites--HELP!!!")?
Yes you are correct in the thought that with a family pack you can use different accounts and that is the easiest way to upload with one click to .mac. But it is still possible to publish differents sites to one .mac account if that is all one has. Even if the sites are in one domain file each purchased mysite.com domain name purchased can be pointed to a different page in the site
Look at it this way
Original Poster has
site1 page 1 page 2 and so on
then he/she has brothersite page 1 and so on.
They each have a domain name purchase wherever
then site1domain.com is forwarded to site 1 page1
and brotherdomain.com is forwarded to brothersite page 1.
Even though both sites are in the same file they do not have anything to do with each other.
This is one possibility there are others but for a novice user this could be the way to go for simplicity.
(Mireille, if you're there, can you clarify what you said - thank you)
3) Would I use Roddy's fix (posted Jan 23 in response to canadensis' "Publishing Multiple Websites?")?
Here's an example of how you can separate two websites that are on the same domain file.
Quit iWeb
Create a new folder on your desktop and call it "iWeb Sites".
Inside this folder create two more - Website A, Website B.
Go to Home Folder/Library/Application Support/iWeb and copy your domain file - command C
Paste this into folders A and B - command V - and also paste a copy of it somewhere else - like in Docs - in case you make a mistake!
Double click the domain file in the folder Website A - this will launch iWeb.
In the left column, delete site B, save and quit iWeb.
Double click the domain file in the folder Website B to launch iWeb.
Delete website A, save and quit.
Drop the iWeb sites folder into your Home Folder.
If you want quick access to this folder you can highlight it and do command L to create an alias to leave on the desktop.
From now on, to launch any site in iWeb you open its folder in the iWebsites folder and double click the domain file.
This is not necessary when you are working on only one site as iWeb saves the domain file of the last site you were working on to Home Folder/Library/Application Support/iWeb. When you open the iWeb application, the last site you worked on will be launched.
Summary:
I'm not sure if some of the answers in previous discussions allow for personal domain names, which is what I need.
I would be very grateful for any suggestions as I'm getting bogged down.
Many Thanks,
Jeff

When you said, "you don't need to do CNAME for both sites…", would this method still allow me to use personal web addresses for both sites?
Yes. With "Ordinary Forwarding" you normally just type your .Mac url (web.mac.com/username/sitename) into a form at the place where you have your name.
I thought I was using 'web.mac.com' as the 'www' CNAME (alias) for my personal domain name (web address), so that when someone typed in my personal domain name they would 'go' to the domain registration location, which would then pass it on to the .Mac server, where my web site is hosted.
That's exactly right. It's just not the only way to do that. Ordinary Forwarding is another way, but it differs in terms of what appears in the address bar of the browser. Either you will see web.mac.com/username/.... or, if you add "masking", you will see your personal name for all pages. The CNAME method results in a address bar that reads www.myname.com/sitename/pagename.html.
Am I way off?
All help gratefully received,
Jeff

Pass column-name as a parameter to reports

Hello,
the code below calls a report. But now I want to sort the rows in the report. For example I have a text-item in my form-modul. If I type a column-name and press the button then the rows should be sorted in the report. Is it possible tp pass column-names as parameter to reports?
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := find_report_object('STATIONSTOPOLOGIE');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_oracle-dev');
-- SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://oracle-dev:8888/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=rep_oracle-dev','_blank');
ELSE
message('Error when running report');
END IF;
END;

Hi,
the work has been done in reports. You can use a lexical parameter in reports to add a condition for sorting to the query like:
select .. from .. where ... &p_order.
Then add another parameter to the report (for example p_param). Fill p_param via your interface in forms (SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, ....) with the column name. Then build a report trigger like:
if :p_param is null
then
:p_order:= null;
else
:p_order:= 'order by '||:p_param;
end if;
But have a look, that p_param can only get correct values.
Rainer

Display the Customer/Vendor Name in the General Ledger Report

**I have Questions about General Ledger Report in SAP Business One. How can Display the Customer/Vendor Name in the General Ledger Report.**
*Just would like to ask if its possible to display the Customer/Vendor Name in the General Ledger Report? The format simply have the Customer/Vendor Code on the said report. Is there a work around on this?*

If ur selection creteria by g/l account,u can display customer/vendor name by including
offset account from form settings.

Display the Customer/Vendor Name in the Check Register Report

Just would like to ask if its possible to display the Customer/Vendor Name in the Check Register Report? The format simply have the Customer/Vendor Code on the said report. Is there a work around on this?
Thanks...

Llowen,
You may develop a Query like this
SELECT T0.CheckNum, T0.PmntNum, T0.VendorCode, T0.VendorName, T0.TaxDate, T0.CreateDate, T0.PrnConfrm, T0.CHECKSUM FROM OCHO T0
WHERE T0.Canceled = 'N' AND (T0.CheckDate BETWEEN '[[%0]]' AND '[[%1]]') OR (T0.CheckNum BETWEEN '[[%2]]' AND '[[%3]]')
Suda

The Customer/Vendor Name in the General ledger Report Form.

I have Questions about General Ledger Report in SAP Business One. Display the Customer/Vendor Name in the General Ledger Report.
Just would like to ask if its possible to display the Customer/Vendor Name in the General Ledger Report? The format simply have the Customer/Vendor Code on the said report. Is there a work around on this?
Please help me.

Hi,
In the Standard Reports, you cannot add a new column.
As mentioned by me earlier, please check 'Offset Account Name' column in the Form Settings if the same is of help in your case.
You can check Note No. [1045356|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1045356] regarding the issue. The same has been fixed in 2005 A PL23.
Kind Regards,
Jitin
SAP Business One Forum Team

How to use iPhoto web gallery with iWeb & personal domain name

So, another question about iWeb 08:
I've set up my site to use a personal domain name, like www.mypersonaldomain.com. I've configured everything with my DNS settings so that it actually points to my iWeb site, and I'm happy about that.
However, I've imported a few iPhoto '08 web galleries into my site, but when I browse to them by going to www.mypersonaldomain.com and clicking on the link for my gallery, it goes to a URL that actually shows my .mac account, i.e. gallery.mac.com/sockdaddy/gallery1/photo.jpg
Is there any way to have the web galleries that I'm using become a more transparent part of my iWeb site, and use my personal domain?

I've never done this on .Mac but I do use this on my server. I don't see why it wouldn't work.
In iPhoto select your web gallery and in the "file" menu select "export" and then "Web Page".
Select your options and click "Export" to the desktop.
There are now 4 folders and an index.html file.
Change the name of the index file to whatever you want to call the page e.g WebGallery.html
Now go to Finder/Go/iDisk/My iDisk/Web/Sites and open your website folder.
Drag and drop the 4 folders and the html file from your desktop into this.
Create a link to this from your website in the "link" inspector and choose "external page".
The URL for the link will be the same as any other page on your site except WebGallery is substituted for the page name.
If you check the "open link in new window" you won't have to worry about the fact that you don't have a link back to your site from the WebGallery page.

IWeb 8.0 - personal domain name publishing

I have created a site and published to my MobileMe account and also published - to my personal domain name, to which the site tells me I have successfully published to the new name/site. I click on visit the site - and it comes up as address unknown. Repeatedly - for two days now.
The site is published as can be - and yet, it still does not come up under my personal domain name. It will come up as my .mac.(username) - address, but not the personal name that I want. The domain is active and shows in my MobileMe account as active, so what's the disconnect? What step am I missing?

easytoremember wrote:
...so what's the disconnect? What step am I missing?
I dunno, but MobileMe live chat support is now 24/7 — see this announcement. Other Apple support options are here.

How to add company name to show up in contact list with person's name on Droid

I just switched from the Blackberry Storm to the Motorola Droid. Is there a way to have the company name show up in the contact list under the person's name. I need that for work. It syncs up with a program called Act by Sage and my storm used to show both.

You can edit your contacts, and list the company name under the organization section. However, it will not show up when they call you. You will only be able to see it in your contact list. Hope this helps!

Personal Domain Names in iWeb/MobileMe?

Why is it that MobileMe will now not accept UK domain names? I have a .co.uk domain name and can no longer use it with the new MMe.
When I first started to use iWeb and .Mac I purchased a UK domain name and had it entered in the personal domain name section and .Mac accepted it with no problem at all and I had my site redirected using the CNAME option for a long time.
Now .Mac has become MobileMe, it will no longer accept UK domain names, only domains ending in .com, .net, .org etc. Due to this, I can no longer use the personal domain name option of my MMe account and I did not want to re-direct to my domain using web forwarding so have had to publish my site to a folder and ftp up to my host server space. Now I don't mind doing this, as it does not take that long and the whole site loads more quickly anyway, but I would just like to know why MMe does not now accept UK domain names now when .Mac always used to?
This is irritating because it means that I am not able to use my MMe account to the full and as I live and work in the UK it did seem more appropriate to purchase a UK domain name rather than a .com or a .net.
Perhaps Apple should look at this again, as not accepting UK domain names excludes a lot of British users!!

What the heck is wrong with some people on this site! The guy was simply asking for advice!
I got a similar snotty reply from someone in a post I made in which I was simply asking for advice from other users.
I thought this was a SUPPORT Forum? Sheesh!
Anyway, I am glad that Ethmoid posted about MobileMe and the problem with it and .co.uk domains. I was thinking of signing up to MobileMe and using iWeb for my blog and having it redirected to a .ie domain. But if this problem keeps up then it looks like I won't.
Happy happy forum!

Creating the default personal domain name to iWeb from Wordpress.

I have a wordpress blog (that I do not want to use) that also serves as the administrator for my domain name and I am trying to get iWeb to be the default home page and not the Wordpress blog. I have changed [edited in Custom DNS Records] the DNS protocol at Wordpress to "CNAME blog web.me.com." and also configured the personal domain in MobileMe to reflect my domain name.
So far I am not having any success with the online instructions and cannot seem to find any further information on how to make iWeb the home page.
Am I missing some steps here?
Anyone have any insight into setting up iWeb with a personal domain, specificially with Wordpress as the domain administrator?
Thank you!

The first step is to configure your personal domain name in MobileMe which you have done.
You then need to go and alter your DNS records and what you want to do is create a new CNAME and direct this to web.me.com and that is it. Your domain name will be your alias and web.me.com will be your host and as long as your site is published to MobileMe, then your domain name should point to your host at MobileMe.
I don't know why you have blog in there under your CNAME? All you need is a new CNAME that points to web.me.com and nothing else and that should work.
Also, rather than changing back to MobileMe from WordPress, why not invest your time and energies into finding a new and alternative hosting company? You don't have long with MobileMe and you do realise that it will be gone at the end of June, so perhaps now would be a good time to look at the alternatives?

Personal No. Name in IW37N or IW49N report required

Similar Messages

Maybe you are looking for