Personal ring tones are not used

My iPhone 5s will not use the personal ringtones but does use a default that is non Apple.
I am not sure when this occurred but it is in the last month or so,
Any help appreciated.

Define "personal ringtone" and "default that is non Apple."
Much more information is needed including what ringtones, how you created/obtained them, how you tried to use them and exactly what happened.
Also, state iOS version. Jailbroken?

Similar Messages

My ring tones are not listed in my Sounds to select as a ring tone any more

My *.mr4 ring tones show in my library and sync both on phone and itunes, but are not listed in my Sounds to select as a ring tone. Was all setup and working and have vanished when I installed latest update. How can I fix this?

Plug your iPhone into your computer and bring up the summary page in iTunes. This is where your sync preferences are located. Go to ringtones and uncheck sync ringtones to get rid of the ringtone from your iPhone. Then after it is removed, check sync ringtones and sync the ringtone back. Deleting and re-syncing the ringtone should resolve it. If not, you will most likely need to restore to factory settings. Make sure to back your iPhone first if you need to restore.

I just got my iphone 6 today; upgrading from 5s - none of my personalized ring tones are available to assign to contacts as they were before

I upgraded to an iphone 6 today. I had all my contacts attached to a particular ring tone on my 5s; they are all gone. How do I find the ringtones I created from real music over the past few years and re-load and assign them to my contacts?

Unfortunately you have to convert Mp3 to M4r to work now. Spent 2 hours to figure this out.
See below !!!
Apple® iTunes® can also be used to convert an MP3 to M4R but the process is a little involved and the directions might be slightly different depending on the version. In general, the imported MP3 must be first converted to the AAC format (which is essentially the same as M4P), then manually renamed from an MP4 to an M4R file.
To use iTunes® to convert an MP3 files to M4R, add the MP3 file to your iTunes® Library. Right-click on the file once more, and choose "Create ACC version" from the popup menu. (This will only appear if you select under iTunes Preferences > General > Import Settings > Import Using AAC Encoder
on a MAC:
Now navigate to the folder where iTunes® has saved this file (or Right Click and Show in Finder ). It should have created 3-4 different versions there.. Mp3, m4a and M4r. Select the M4r version and drag over to TONES in iTunes...now sync your phone with iTunes
On a PC
Now navigate to the folder where iTunes® has saved this file (or Right Click and Show in Finder ). Use the computer’s Search feature to find the file name, or look in the default Music folder, then inside the iTunes® folder. Scroll down until you find the saved file, which will be an M4A file.
Drag the file to the Desktop (a copy will be generated), then go into iTunes® and delete the original file. The Desktop copy will remain.
Return to the Desktop and rename the ringtone file with an M4R extension. If you cannot see file extensions, go to Folder Options (via Control Panel) and under the View tab, uncheck "Hide extensions for known file types" and try again. Once the file has been successfully renamed, click on it and iTunes® will import it into the Ringtones folder. Synch your iPhone® to upload the ringer.

HT201272 My purchased ring tones are not under my previously purchased items, why not?

I did not transfer my purchases prior to syncing my iphone and have lost my ringtones. Is there anyway I can get them back from the iturnes store?

To all those unlucky people who have lost there personal tones on their iphones. I have solved the problem. In itunes rename your tones and and sync again. All the allocations to specific tones are even automatically fixed on the iphone.
Hope this works for everybody. (my tones where tones that I had created on my old nokia and converted to work on my iphone.)

How come my ring tones are not available to download off of iTunes Match to my iPhone 5?

Any help I can get would be appreciated. I am running an older verion of iTunes on my iMac G5 which will not allow me to plug in my new or old phone running iOS6. I can do everything wirelessly (updates,etc..) which is great but access to non itunes music is nonexistent. iTunes match is some comfort but still alot of music missing, which i guess I can live with until spring when i can upgrade my Mac but I would really like to get my ringtones onto both devices and kind of figured they should be available via the Cloud at least.

iTunes Match is focused on music, you will need a different method to access the original ring tones.

Ring tones are not syncing in my apple 4s phone

hi
how can i sync ring tones in my 4s iphone?

Plug your iPhone into iTunes, in the left panel (Library) there should be a section "Tones", verify your ringtones are in there then sync

HT201401 my ring tones are not working

My ringtones are not working

Sorry to hear that.
Do you have a question?
If so then please explain your issue in far greater detail than :"My ringtones are not working" and ask your question.

My ring and text tones are not working?

Both my ring tone and text alert tone are not working. I'm only made aware I have a call or text message through the phone's vibration. I have checked all the 'Sound' settings and all appears to be fine and ringer volume slid to high.
Do I need to reboot this phone for them to work as I'm not sure how to do this? I'm using iPhone 4 version 5.0.1
Would I loose all my files and apps on my iPhone after rebooting?
Appreciate any clear help and advice on this popular subject that is available.
Best wishes
Sizo65

Thank so much Ingo2711, your suggestion has solved my problem. I am so new to the iPhone I didn't realise it had a handy little mute button and it was infact switched onto 'mute'.
And thank you for the rebooting advice too.
Best wishes
Sizo65

I just upgraded my iphone 4 to ios5 and now my purchased ring tones are gone.

I just upgraded my iphone 4 to ios5 and now my purchased ring tones are gone. I followed another comment and can also say that they do not show up under "purchased" in my "app store."

@lovehelmet good joke!
Today I visit an A1 Telekom store and I ask about this problem. He say "the programmer are working to that and today or tomorrow you will be able to set any APN or other settings".

Ring tone are gone on phone can't reinstall from itunes, also all alert tones shortened up

my ring tones are gone from my phone, they are showing in my itunes account but i cannot reload them into my phone. also all the alert tones seem to be shortened up. for me they are not long enough for me to hear, how do I lenghten them the way they were?

Apps and other media can be downloaded again for free, see this article: Downloading past purchases from the App Store, iBookstore, and iTunes Store
Did you make sure that no restrictions are set on your phone to install apps? Check Settings/General/Restrictions --> App Installation.

When I restore my iphone, all my music and ring tone are missing. Does Backing up by iphone backup my music and ring tone?

When I restore my iphone, all my music and ring tone are missing. Does Backing up by iphone backup my music and ring tone?

It doesn't matter what it is in your backup that's causing the problem because you can not selectively restore things from your backup. It's all or nothing.
Set you phone up as a new device and start over.

TS1368 I want to delete a lot of things childrens stories, albums which are not used which that are on my ipad. However when I go through Itunes it wont show me most of the stuff in my library. it takes ages to delete one at a time.

I want to delete a lot of things childrens stories, albums which are not used which that are on my ipad. However when I go through Itunes it wont show me most of the stuff in my library. it takes ages to delete one at a time.
Can you help please?

Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items.

How to not display nodes in a tree if Oracle roles are NOT used?

How to not display nodes in a tree if Oracle roles are NOT used?
We don't use Oracle DB roles to grant users access to Forms from the menu. We use a template and role system of our own. Basically a few tables with templates and roles.
We want to convert our normal Forms menu to a tree menu and one of our key requirements is that when the tree is populated ONLY nodes with programs (i.e. forms) he has been granted to execute is shown.
Since we don't use Oracle Roles how to do this in a tree?
I created a function to show/hide LEAF nodes, BUT problem is that there are sub-menu nodes showing even if the leaf-nodes under it has not being displayed. My function has suppressed it.
My tree query is like this:
SELECT
     t.status, LEVEL, t.label, t.icon, t.node VALUE
FROM
     tma_tree_menu t
WHERE
tma_authenticate_sys_chk_role(USER, t.node) = 1
CONNECT BY
     PRIOR t.node = t.master
START WITH
     t.MASTER IS NULL
ORDER SIBLINGS BY
t.position
The tma_authenticate_sys_chk_role will return 1 only if the user has access to the form under that node.
I tried the FTree functions in Forms but even that has nothing.
Any help would be greatly appreciated.
Edited by: Channa on Mar 17, 2010 6:49 AM

Would you share the source code? I guess what I need is how exactly you retreive the user credentials from the DB table and set that boolean variable.
and then how to condition it in UIX?

'You Are Not Using The Correct Type of Phone Cord' Error

Having a issue with my fax on my HP Officejet Pro 8500 wireless. Tried to send a fax, it received a send error. I ran fax test and it came back with "You are not using the correct type of phone cord". Nothing has changed since I last fax'd but I check the lines and connection, everything appears ok. Phone jack is connected to 1-line and Officejet '2-ext' is connected to the phone. I use a dedicated phone # and the Officejet is set to auto answer. I can call out and receive calls on the phone connect to the Officejet. My assumption is that since I can use the phone without issue there is nothing wrong with the phone line. Any ideas?
This question was solved.
View Solution.

I was having the same problem. I'm using a the 2 wire phone cord provided with the printer and still getting this error. Turns out that it related to have a phone extension plugged into the printer. If I unplug the telephone form the extension jack on the back of the printer, then the fax test passes. I was even using a 2 wire cord on the phone extension but it seems that simply having a telephone plugged into the extension jack will cause this error.
Run the test without a telephone plugged into the printer's extension jack and you should be fine.
Worked for me!

How do I find out what features are not useful in my Classifier?

How do I find out what features are not useful in my Classifier? I am trying to trim down the number of features to speed up the training of my data, I have about 3700 features. I have found the Filter Based Feature Selection Module and have not been successful
in using it. I have looked through all the examples and have not been able to find any examples using the module. Will the Filter Based Feature Selection Module help me to trim features. If so how do I use it?

One way to do this would be is to use a random forest classifier. Feature/variable importance can be obtained relatively easily with random forests.
Here is how you may do it in R.
> install.packages('randomForest') #install randomForest package in R if it is not already there
> library(randomForest) # reference the library
> data(mtcars) # load motor cars data that ships with
#train a random forest
> mtcars.rf <- randomForest(mpg ~ ., data=mtcars, ntree=1000,keep.forest=FALSE, importance=TRUE)
> importance(mtcars.rf)
> importance(mtcars.rf)
#You will see an output like below
%IncMSE IncNodePurity
cyl 16.168645 169.96741
disp 18.672188 260.08722
hp 17.584375 184.95007
drat 6.948743 63.54528
wt 17.818509 254.30347
qsec 4.772889 33.25546
vs 5.303058 24.39064
am 5.210181 17.36626
gear 4.619161 21.55450
carb 8.577037 28.46715
# or plot the importance as follows
> varImpPlot(mtcars.rf)
What this tells you is how important predictors/features/variables like horsepower(hp), weight(wt), no. of cylinders (cyl) is in predicting miles per gallon (mpg).
If you are wondering how the data looks like. Try this
head(mtcars) # gives first few lines of the data set.
mpg cyl disp  hp drat   wt ...
Mazda RX4     21.0   6  160 110 3.90 2.62 ...
Mazda RX4 Wag 21.0   6  160 110 3.90 2.88 ...
Datsun 710    22.8   4  108  93 3.85 2.32 ...
. Try this
Here is a few useful resources:
Random Forest documentation (Check out the pages on variable importance and variable importance plot)
http://cran.r-project.org/web/packages/randomForest/randomForest.pdf
Motor cars data: http://stat.ethz.ch/R-manual/R-devel/library/datasets/html/mtcars.html

Personal ring tones are not used

Similar Messages

Maybe you are looking for