Personalization data for WebDynpro ABAP application ?

Dear Experts,
We can personalize WebDYnpro ABAP application via right click , show hide buttons , columns etc.
Where is this personalization data stored or how can it be retrieved assuming my application is executing outside the  portal ?
Greetings
Prashant

Hi Prashant,
it is stored in the ABAP system - not the portal, so no issues about running outside the portal.
This is different to WDJ pagebuilder configuration/personalisation - which is stored in the portal!
you can see some of the personalisation framework that is used for things like storing POWL user preferences etc in the backend via the IMG path
Cross-Application Components --> General Application Functions --> Generic SAP Business Suite Functions --> Personalization (sic) .
Hope this helps you,
Chris

Similar Messages

  • Getting Pernr for WebDynpro ABAP application

    I am building a new WebDynpro ABAP application and I want to be able to get the PERNR for the user logged into the portal and this application.
    I have read some information on this forum about getting the URL or application parameters in order to get the userid or similiar parameters and to handle this within the Window in the HANDLEDEFAULT method of a WebDynpro ABAP application.
    I have looked into this and I don't think pulling information from the application parameters will work.  For example, I checked one of our current services for "Personal Data"  and when I go to the portal content administration,  application parameters, I don't see any reference to userid..etc.  I see Property ID, Property Category, Inheritance, End-User Personalization, and Property Description.  In addition, I do not see any information from the URL itself that I could use. 
    Here is the scenario.  The user logs into the portal using the 3 character Network id which in turn, I assume, gets their SAP userid and PERNR in order to retrieve all the HR infotype information for each service.  By the way, the service I mentioned above, "Personal Data", is written in JAVA, so I am not able to see how this particular service works or handles getting the userid and PERNR.
    Has anyone come across this scenario before and how was it handled in terms of getting the userid and PERNR?

    I was thinking that SY-UNAME would be available, but was not sure.  For some reason, I was thinking I was going to have to pass something from the applicaton parameters or some other method to my WebDynpro ABAP program..
    I am not the portal administrator so I have not yet added my WebDynpro ABAP program to the portal yet.  Once, it's added, I will check out the availablility of sy-uname.
    Thanks.

  • Iview for Webdynpro ABAP application with TimedTrigger

    Hello,
    I created an IView  for a WebDynpro  ABAP  application. This application uses a UI element TimedTrigger. Without portal integration this TimedTrigger works fine. Inside an IView  this TimedTrigger element does not work anymore. Did anyone have a similar problem? Does anyone have a solution for this?
    Thanks and regards
    Marc

    hi,
    Go through this link
    [****************/Tutorials/WebDynproABAP/TransactionCode/Create.htm]
    Hope it will help you.
    Regards,
    Rohit

  • How to remove personalization done on WebDynpro ABAP Application

    Hi,
    I have rearranged columns in Receipt View of FITV_EXPENSES webdynpro application via personalization by running it in administrator mode in SE80.
    Now I want to remove this personalization. How can I do so? Please help.
    Regards,
    Madhvika

    Hi Madhvika,
    If you want to disable personalization.. try this
    Set parameter WDDISABLEUSERPERSONALIZATION to 'X' .
    and also read this..
    http://help.sap.com/saphelp_nw70/helpdata/en/46/98ce61f37d19ace10000000a11466f/frameset.htm
    Re: Personalization - 'WDDISABLEUSERPERSONALIZATION'
    It might solve your problem.
    Cheers..
    Kris.
    Edited by: kissnas on Mar 3, 2011 5:24 AM

  • Getting prob while creating view in webdynpro ABAP application

    Hi Guys,
    I am facing a problem while creating a view for webdynpro ABAP application. It is giving an error as "ICF service "/sap/public/bc/WebDynpro/ViewDesigner" inactive".
    can anybody let me know how to solve this problem.
                   Thanks In Advance
    Regards
    Ravikumar

    I think check Internet explorer Tools ->Internet Options ->Connections.>Lan Connections> if the proxy or anyting checkbox is clicked coz it doesn't work with Internet on .
    Please reward if useful.

  • Apply custom themes to WebDynpro ABAP application in Portal

    Hi,
    We have just upgraded the E-Recruitment to EHP4. We have two instances of ECC in which one acts as HR instance and the other one for E-Recruitmet. We have created custom themes for portal and need to apply the same for the WebDynpro ABAP applications for E-REcruitment. I have downloaded the theme and from portal and uploaded the same in MIME folder using SE80 transaction. I have also added the parameter sap-cssurl=/sap/public/themes/<my custom theme folder name>.
    Also tried giving the url in application parameter as
    SAP-EP-THEMEROOT=http://<hostname>/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/customer/<custom theme>
    Is there any other way to apply themes for WD ABAP applications. I dont want to customize the standard applications and just want to apply the themes.
    Any suggession on this is highly appreciated.
    Kind Regards,
    Vivek.

    Hi,
    to create theme for webdynpro abap application, use Eclipse Plugin.  Please remeber to check the version of theme file before using theme.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d5ef40-465e-2c10-9ca9-f548bfc3f236
    setup custom theme for webdynpro abap application.
    FEATURED EVENTS
    Regards
    Baby

  • Popup for transport request in WebDynpro ABAP application

    Hi there,
    which function module can I use to prompt the user for the transport request in an WebDynpro ABAP application.
    In SAPGUI I found 'TR_ORDER_CHOICE_CORRECTION' to do this but I get a short dump when I call this one from a WebDynpro ABAP application ...
    Many thanks in advance!
    Regards,
    Steffen

    Thanks for your replay!
    The reason I get the short dump is the function modules I found call a dynpro screen inside for prompting for the request. I am not surprised this does not work for WebDynpro applications ....
    So I thought there is a generic function module for WebDynpro applications available or a WebDynpro component I can use for this ... Sure I could build it by myself but this does not seem to be the right way for me since this requirement seems to be of a generic nature.
    @Gaurav: I am interested to bring up a generic popup for prompting for the request. So I cannot use the flags to suppress the screen ...
    Best regards,
    Steffen

  • Webdynpro abap application for HCM

    Dear all,
    In enterprise portal->Content Administration->PortalContent->Content provided by SAP->line_manager->Manager Self-Service->iviews->HCM-> there is a PCR application by name "personnel change request". this is a webdynpro java application.
    I have installed latest business package of ESS/MSS. so there should be both dynpro java and dynpro abap application. kindly tell me that for the personnel change request PCR application in which package can i find the wendynpro abap application.
    Regards,
    Bharath

    Dear Bharath,
    I am no expert on the topic but i can definitely answer your last question.
    Yes, Webdynpro ABAP applications are available in the latest versions.I have seen this in ECC Enhancement Package 3 (ECC 603).
    I can't really tell you much abt PCRs but the Requisition forms(SRQ3) in 603 are based on WDA application.If interested you can check the Recruitment work center in MSS.
    Also, please ensure that the relevant Business Function/Services are activated when using the enhancement packages to see the relevant functionalities.
    I think you need to activate the HCM administrative services BF available as of 602 . This definitely uses webdynpro ABAP applications in the portal.
    Regards,
    Sowmya
    Edited by: Sowmya Kadambi on Dec 23, 2008 3:23 PM

  • Webdynpro ABAP application for specific Country

    Hello Consultants
    We have developed a custom Webdynpro ABAP application and the service is working alright.
    The probelm is that this service is to be enabled only for one Country i.e. India and this should not be visible for other country users.
    I have created resource, service and country-specific service for this application and linked the country-specific service to India. Even after doing this am not able to stop  the availability of  this service other countries.
    Shall be thankful for an immediate response.
    S. Chandrasekaran

    Dear Bharath,
    I am no expert on the topic but i can definitely answer your last question.
    Yes, Webdynpro ABAP applications are available in the latest versions.I have seen this in ECC Enhancement Package 3 (ECC 603).
    I can't really tell you much abt PCRs but the Requisition forms(SRQ3) in 603 are based on WDA application.If interested you can check the Recruitment work center in MSS.
    Also, please ensure that the relevant Business Function/Services are activated when using the enhancement packages to see the relevant functionalities.
    I think you need to activate the HCM administrative services BF available as of 602 . This definitely uses webdynpro ABAP applications in the portal.
    Regards,
    Sowmya
    Edited by: Sowmya Kadambi on Dec 23, 2008 3:23 PM

  • FPM Navigation - asking for Log on when calling WebDynpro ABAP Application

    Hi Experts,
    I want to call a Non FPM based WebDynpro ABAP Application from a FPM Component.
    I have followed the method showed in the following thread by Rajkumar to call WebDynpro Application using URL.
    [Launch transaction without launchpad|Re: Launch transaction without launchpad]
    I could successfully call my WebDynpro ABAP application using this approach,
    However when the application opens in new Browser , it asks for log on again.
    Can anyone help me to avoid this log in screen.
    P.S. --> Both the applications are in the same server.
    Regards,
    Ashish Shah

    Hi Ashish ,
    I am also facing the same problem , did you find any solution ?
    Thank You,
    Aman

  • Error in webdynpro(ABAP) application development

    Hi,
           I am very new in webdynpro (ABAP) application development. I want to create some application based on webdynpro ABAP for few Z- Report. What is the prerequisite to develop a application based  on webdynpro( ABAP ) .Because when I am trying to create application in se80 and giving the related functional model name in wedynpro component field , I am getting the error like Web Dynpro Comp./Intf. ZOS_xxx_FM does not exist. How to proceed further?
    Thanks,
    Kundan

    Hi,
    Can you be more clear...
    Please refer this link  for Personalization-
    http://help.sap.com/saphelp_nw2004s/helpdata/en/22/719f42f2ff7e5fe10000000a155106/content.htm
    Regards,
    Lekha.

  • Calling a portal page from WebDynPro ABAp application

    Hi,
    I would like to call a portal page (any type) from a WebdynPro ABAP application. I have the PCD location of the page.
    Which call shall I make :
    Absolute Navigation
    Relative Navigation or
    OBN.
    Also, can anyone send me short code snippet on the following.
    The package SWDP test examples are not working.
    Best Regards
    Sid

    Hi Siddharth,
    Well, to start with you can go for ABSOLUTE NAVIGATION.
    Secondly, you can find the snippet here
      DATA LO_API_COMPONENT  TYPE REF TO IF_WD_COMPONENT.
      DATA LO_PORTAL_MANAGER TYPE REF TO IF_WD_PORTAL_INTEGRATION.
      DATA L_NAVIGATION_TARGET TYPE STRING.
      LO_API_COMPONENT = WD_COMP_CONTROLLER->WD_GET_API( ).
      LO_PORTAL_MANAGER = LO_API_COMPONENT->GET_PORTAL_MANAGER( ).
      MOVE 'pcd://portal_content/com.xxxx.zpof_f_XXXXportalcontent/com.xxxx.test/com.xxxx.folders.MaintenanceBusinessPackage/com.xxxx.test.mt.pages.Pages/com.xxxx.pages.MaintenanceTasks'
        to l_navigation_target.
      CALL METHOD lo_portal_manager->NAVIGATE_ABSOLUTE
        EXPORTING
          NAVIGATION_TARGET   = L_NAVIGATION_TARGET
    *      NAVIGATION_MODE     = IF_WD_PORTAL_INTEGRATION=>CO_SHOW_INPLACE
    *      WINDOW_FEATURES     =
    *      WINDOW_NAME         =
    *      HISTORY_MODE        = IF_WD_PORTAL_INTEGRATION=>CO_NO_DUPLICATES
    *      TARGET_TITLE        =
    *      CONTEXT_URL         =
    *      POST_PARAMETERS     = ABAP_FALSE
    *      USE_SAP_LAUNCHER    = ABAP_TRUE
    *      BUSINESS_PARAMETERS =
    *      LAUNCHER_PARAMETERS =
    Above it, the examples of SWDP will not work if you test them from SE80-ABAP WAS...I suggest you to create a WDA IView in Portal and test it in Portal itself.
    Hope this should solve your problem.
    Regards
    <i><b>Raja sekhar</b></i>

  • Modification in standard webdynpro abap application

    Hi
    In my portal for some of my ESS applications are used in webdynpro abap for example travel expense and travel request now i have a requirement like i have to make the create travel expense button disable based on the condition llike i only he has to click create travel expense after creating travel request .So can anybody let us know how to do modofications in the standard webdynpro abap application.
    Thanks in advance.

    Hi
    For making changes in the standard web dynpro compoenent, you need to create and implement enhancement.
    For this you can find many links in SDN  on how to create enhancement.
    Now coming to your specific requirement.
    Here what you can do is open the standard component.
    1. press ctrl +F4, It will open a popup there give some name to your enhancement.and desicrption . then press Enter.
         Assign it to teh package you want.
    2. Go to the view where you want to disable the button, There go to the layout and find the ID of the button. say it is 'BTN'.
    3. Now go to methods tab, scroll right and selct post exit method of wddomodifyview emthod.
    4. there write the code with the condition you want.
    if  flag  eq 'yes'.
    data  lv_btn type ref to cl_wd_button.
    lv_btn ?= view->get_element( 'BTN' ).
    lv_btn->set_enabled( abap_false ).
    endif.
    5. one last thing is you can create a attribute named flag of type string and set its value to 'yes' when you want the button to enable.
    Thanks
    Sarbjeet Singh

  • How to access SQL tables from WebDynPro ABAP application ?

    Hi,
    I am trying a scenario, where I need to send an user ID to SQL server table (update/modify/delete) from webDynpro ABAP application.
    Basically ,I am trying to know:---
    a>How to write a SQL Connection from ABAP code within webdynpro ABAP application
    b>What are the ways to do it.(by code or any other API/mechanism)
    I appreciate if anybody knows this.
    Thanks
    Praveen

    Hi,
    The EXEC CONNECT ... is usually used in the procedural ABAP code. For this you can refer to the ABAPDOCU.
    I dont have any sample code on the classes I listed try to check out them for the parameters and the methods they have.
    In WD for Java, we have these connection classes to connect to any databsae server.
    Or try to create an RFC with DESTINATION for this
    Pls check out this link for this -
    Pull data from another r3 server using abap dynpro
    Regards
    Lekha

  • Why do we go for Webdynpro ABAP?

    Hi All,
             Why do we go for Webdynpro ABAP and How is it beneficial comparing with other technologies in SAP?
    Thanks
    Gopi.

    hi ,
    u may wish to like to go thru this WIKI
    http://wiki.sdn.sap.com/wiki/display/WDABAP/General+Issues#GeneralIssues-1.95
    in whch WD ABAP is compared with WD JAVA , BSP , JSP and HTMLB and mobile infrastrucutre .
    u may wish to go thru these WD ABAP tutorials :
    http://help.sap.com/saphelp_nw2004s/helpdata/en/03/0048413e466e24e10000000a155106/content.htm
    Main Topic Page:
    http://sdn.sap.com/irj/sdn/nw-wdabap#section2
    Tutorials for Beginners:
    Web Dynpro for ABAP: Tutorials for Beginners [original link is broken]
    eLearning Videos:
    /people/thomas.jung/blog/2006/06/20/web-dynpro-abap-demonstration-videos
    go thru this quote by thomas
    The designers of WDA didn't want to lock developers into having to create an extra model layer. One of the values of WDA is that it sits closely with the underlying business logic and data. Therefore it can easily reuse existing function modules or classes (or even contain SQL directly - although this isn't recommended).
    There are different options for playing the role of model. You could create a faceless web dynpro component. This is sometimes used in large complex Floorplan Manager applications. However the cross-component context binding can represent a performance problem.
    More often a class is used as a simple model. These are called feeder classes in POWL. But really any ABAP class can be used to separate out the logic for the model. Data from this class can be accessed and then bound to the local context. Sometimes people use the Assistance Class as a model. It is possible to share a single instance of an assistance class between a hierarchy of components - making it an efficient way to share data.
    Of course there are the service call wizards. These aren't really models like in WDJ. Instead they are just shortcuts to generate context structures and code generators. However everything they generate can also be created by hand or altered after generation.
    rgds,
    amit

Maybe you are looking for