Personalization of WD ABAP iViews
Hi,
Some of the ESS travel applications are WD ABAP based and we can personalize the UI on the browser.
However, when we do the personalization, it doesn't ask to create any transport request. How do we normally transport the personalization changes to QA, Prod systems?
Has anyone done this before?
Thanks & regards,
Manish
Thanks Thomas for your reply.
See the link below:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/bbbeac2b07296fe10000000a42189b/content.htm
This says that administrator personalization can be transported. The transport pop up is not coming for me. I'll see how to get that working.
regards,
Manish
Similar Messages
-
ESS/MSS Personalization for WD-ABAP iView
Hi All,
This is regarding personalization for WD-ABAP iView.
1. Logged into portal using content admin role and made necessary personalization on development system.
2. In order to move these changes to quality, I followed the below mentioned steps as found in one of the forums:
For any WD-ABAP Personalization transport, you need to follow these steps:
a. Via content admin preview and edit the iView to your desires. Make sure you do this through
content admin only or the changes will be user specific and those cannot be transported.
b. Go to transaction SICF and follow the path to make sure this service is active.
sap/bc/webdynpro/sap/wd_analyze_config_user
c. Launch the service and you'll see a table listing the Webdynpro ABAP changes. You'll only
be able to transport the user scope "All"
3. I clicked on the transport button and this created a request on my development client with the following objects added: WDY_CONF_USER, WDY_CONF_USERT, WDY_CONF_USERT2
4. When I try to transport this to Q, it gives me an error mesage saying "you cannot transport client-specific objects".
Kindly advise the way to transport this personalization further in the landscape.
Regards,
MurtuzaHi,
Please check the client settings CHANGES AND TRANSPORTS FOR CLIENT SPECIFIC OBJECTS is set to changes w/o automatic recording, no transport allowed in SCC4.
Thank you,
Shyam -
Webdynpro for ABAP iView personalization not sticking?
We are currently on EP7 and are having a very odd issue with ABAP Webdynpro iView personalization.
For our Java Webdynpro iViews, we have used iView personalization quite a lot to change field labels, add text, change button text, etcc. all via portal content administration (ctrl+rightclick to make changes from iView preview). These changes would show as custom iView parameters settings on the Java Webdynpro iViews. Then we could put these iViews into our own portal packages and move them to other portals (QA, Production, etc).
However, this is not working quite right with our ABAP Webdynpro iViews. We personalized an iView on our DEV portal. The personalization changes showed just fine for all users (ie. changes to input field labels). However, no new parameter settings show for the iView for the personalization. Also, after packaging, exporting and then importing the iView into the other portals (like moving from DEV to QA), the personalization is gone. We had to manually recreate this on the QA system. However, we do NOT want to do this on the production portal of course nor do we want this to be the method/solution going forward.
So has anyone seen this? Is this some issue/difference between the ABAP and Java webdynpro iView templates?If it is WebDynPro ABAP iview, if you do the personalization, then your personalization is persisted in ABAP stack. You need to transport it in ABAP i.e R/3 development system to R/3 Quality system. Transporting only iview is not enough.
Note : If you do the personalization for the ABAP iview, it will not be saved in the portal, it will be stored in the ABAP stack.
Thanks
Manoj K -
ESS/MSS personlization for WD-ABAP iView
Hi All,
This is regarding personalization for WD-ABAP iView.
1. Logged into portal using content admin role and made necessary personalization on development system.
2. In order to move these changes to quality, I followed the below mentioned steps as found in one of the forums:
For any WD-ABAP Personalization transport, you need to follow these steps:
a. Via content admin preview and edit the iView to your desires. Make sure you do this through
content admin only or the changes will be user specific and those cannot be transported.
b. Go to transaction SICF and follow the path to make sure this service is active.
sap/bc/webdynpro/sap/wd_analyze_config_user
c. Launch the service and you'll see a table listing the Webdynpro ABAP changes. You'll only
be able to transport the user scope "All"
3. I clicked on the transport button and this created a request on my development client with the following objects added: WDY_CONF_USER, WDY_CONF_USERT, WDY_CONF_USERT2
4. When I try to transport this to Q, it gives me an error mesage saying "you cannot transport client-specific objects".
Kindly advise the way to transport this personalization further in the landscape.
Regards,
MurtuzaHi Murtuza,
As u have mentioned that u are doing iview personaliztion in portal and u want to transport that customized ivew or for that matter any portal content than i think u can do it by navigating to:
sys admin>transport>transport pakges-->export
create a transport pakge -->add ur contents which are to b transported --> download the epa file to ur local desktop.
Now log into Q (or target sys) navigate to sys admin>transport>transport pakges-->import
Make sure import gives Zero error.
Correct me if u r not looking in for this kind of transport procedures.
Regards,
JJ -
Personalization option for Standard Webdynpro ABAP iView
Hello Experts,
We are stuck with an issue on personalizing a Webdynpro ABAP application. Personalization option is available for Webdynpro Java iViews, when we preview the iView from the Administrator's login and do a Control + Right click. This will provide a dialog box where we can personalize the iView. We can do personalization on the existing fields (hiding the fields, changing the text etc). But this is not happening with Webdynpro ABAP iView.
Scenario:
We have a Standard Webdynpro ABAP iView which has 3 rows of links (Row1 - 5 links, Row2 - 2 links and Row3 - 2 links). The client wants only one link in Row1, one link in Row2 and one in Row3. I tried hiding the other links through Personalization. It is not working as am able to see the changes only with the Admin ID. When I assign this iView to a different user and tried viewing the iView its showing all the links.
But the strange thing is that, if I hide the complete row (eg. Row2 both the links are hidden), then am able to see the complete row being hidden with both the Admin ID and also the end user's ID. So not sure where am I missing.
Please refer the link for the Personalization option available for Webdynpro ABAP iView.
[http://help.sap.com/saphelp_nw04s/helpdata/en/46/98ce61f37d19ace10000000a11466f/frameset.htm|http://help.sap.com/saphelp_nw04s/helpdata/en/46/98ce61f37d19ace10000000a11466f/frameset.htm]
Any help in this regard will be greatly appreciated. Thanks in advance.
Cheers
MadhuHi Volker,
Thanks for your reply.
I think, I have set the properties of the iView right. I have tried with all the options for the property "Launch in new window" property of the iView but it didn't work.
"By home page framework" I mean that the link of the iView in portal has been created using the "Home page framework" i.e. from "SPRO" transaction in the backend.
Please let me know if you need any other input from me.
Regards
Mukesh -
Customize Webdynpro ABAP iViews (EhP2)
Hi All
From EhP2, SAP is providing ESS business package in webdynpro ABAP. I am about to customize the iViews like hiding some columns, input fields etc. I am able to do it through personalization, but I want it to reflect to all users. So far in Webdynpro Java ESS iViews, we could use Ctrl+right click to do this kind of customization locally, but this is not working with WDA ESS iViews. It would be great if any of you could provide me with some information on this.
Thanks, RajHi Babu
Since you have said ECC5, I guess the ESS should be based on Java iViews and control + right click should work. I was in teh ECC6.0 EPh2 and it was ABAP iViews and to customize it you have to follow the procedure as I have said. let me know if anyting.
If you are using Java iViews, and ctrl + right click does not work, one thought strikes me that you may not be provided with appropriate permission.
Raj -
Issue in calling WebDynpro ABAP iView in UWL
Hi,
We have configured UWL to our ECC system successfully.
In our UWL for a task TS90105432, when the users click on work item in their UWL Inbox, initially UWL launches a standard page in new window. On this page users can see a link u201CNote for Approval Processu201D, when they have to click on this link a web dynpro page needs to launch in new window. But when users click on Note for Approval Process link no action has been triggering / taken place and no error message.
Actually we have created a web dynpro ABAP iView for the TS90105432 - Note for Approval Process in Portal.
Through content admin we can see the preview of Note for Approval Process WDABAP iView. But the problem is not able to call this iView when the users click on Note for Approval Process in UWL.
Shall we need to set any Visualization parameters in SWFVISU? Can you please share your iViews on how we can call this WDABAP iView in UWL
Thanks
PhaniHi,
There are plenty of instructions & discussions about how to launch Web Dynpro ABAP applications from UWL. Just do some searching.
For example you could start with this document:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6
After you know the basics, you could ask help for specific steps or something that you don't understand.
Regards,
Karri -
Hi all,
I have created WD Abap iviews on Portal (EP 7.0). These iviews are behaving weirdly.
Initially they were working fine, however they have suddenly started flickering.
The application does not load when i open the iview, infact it simple keeps flickering.
Any solution to this?
Regards,
Preksha.hi,
Following SAP notes would help you to get solution :-
928524-Flicker Free screens in Portal
1230506 - Endless loop when starting Web Dynpro ABAP
Thanks and Regards,
Jigar Oza -
Webdyn pro ABAP iview is not opening in Internet
Hi All,
I Have one webdyn pro ABAP iview it's working fine in LAN. but same iview is not working in internet.
we are using https protocol in Internet and in LAN http protocol.
When clicks the Iview one alert message is populating and showing secure and non-secure message . when I clicks Yes and No its showing page not found error.
But is working in LAN using http protocol.
is it require any parametators need to be change?
Thanks
Polaka
Edited by: polaka123 on May 18, 2011 1:14 PMNoe its working..
Changed System property Web as protocol to Http.
Previously it is Https.
Thanks
Polaka -
Problem hiding Tabs in Tabstrip of My Trips and Expenses WD ABAP iView
Hi,
My requirement is to hide the thet tabs ALL MY Trips,All my Travel REquest,All my travel Plans,Pending expense report from the tabstrip ALl my Expense report in Travel and Expense Application.
I have gone through the thread and the sap note mentioned in
Re: Problem hiding Tabs in Tabstrip of My Trips and Expenses WD ABAP iView
My problem is tabs that has to be deleted /hidden does not present in the Development system, but exist in the QA or the prd system.
So how to implement the note when data is not present in the dev system and only exist in the QA/PRD system.
Pleas eprovide me your valuable inputs.
Thanks in advance.
PoojaImplemneted the note and problem is solved.
-
Hello experts.. we are creating several iViews for our portal, all these iViews are from WebDynpro, some of them WebDynpro for Java and some others are WebDynpro for ABAP.
I have successfully created all the WebDynpro Java iViews.
Now I need to create the WD Abap iViews for the portal but I'm having some dificulties... first of all, I need the WD Abap iViews to connect the same way the Java ones.. this means the same user/password -WD Java uses- without asking for authentication... in Java we don't have that problem because the connection is handled by te JCo, but now I don't know how to set this up for their ABAP counterpart. Is it possible? to launch the WDA application without asking to logon, and to use in this case the same user we're using with the WD for Java -the one of the JCo-?
The other problem I'm having is when testing the WDA iView, so far I manually type username and password but I'm getting the following error.
Please check the protocol and host entries for system 'DESARROLLO_ECC'..
We're connecting to ECC 6.0, which parameters do I need to set up in order to get it right?
Any guidance or comments will be welcome.
Thanks in advance..
JVHi Valencia,
You will have to configure single sign on (SSO) between the portal system and the system on which you have hosted the WDA applications. This will remove the authentication issue.
w.r.t the error you facing...do check if the WDA system is reachable from the system where ur trying to access the application, when I say reachable try to ping the WDA system
Thanks,
GLM -
WebDynPro ABAP iView not picking Portal Theme stylesheet
Hi,
We are facing issues in integrating the WebDynPro ABAP application in Portal . The WebDynPro ABAP iView is not picking the portal theme. It is picking its actual color.
We are in EP 6 SP 14.
Can anyone let me know what can be the reasons.
Best Regards
SidHello,
for the web dynpro for abap application you can create a application configuration. To create the configuration
right click on the application -> create/Change Configuration -> and once you create the configuration, it will open up in browser and you can see 2 tabs structure and parameters
In parameters tab you will find an option Force Use of External StyleSheet check the box and save the configuration. Once done with this process.
Go to the iView Properties of the applications and set the application configuration name and it would take the Portal Theme.
hope this helps.
Pramod
reward points if helpful. -
WebDynPro ABAP iViews not picking the portal look and feel
Hi,
In our case , WebDynPro ABAP iViews not picking the portal look and feel.
Is there any way to provide the custom developed portal theme link or css file to the WebDynPro application.
Can it be done programmatically in the WD ABAP application.
Best Regards
SidLook at the below link, it will answer your question:
Re: EP 7 Portal stylesheet with WD ABAP
Raja T -
Calling transaction iview and coming back to abap iview
Hello all,
Is it possible to call a transaction iview from abap webdynpro application iview and come back to it after we are finishing running the transaction? I know I can use the navigate_absolute method to call the transaction iview but i want to know if we can come back to the original abap iview, which called this transaction iview.
resume suspend is not an option since they do not work in portal as per the sap help.
Thanks.
J.thanks
-
WebDynPro ABAP iView Flickering
Hello Everyone,
This one is weird. I have WebDynPro ABAP iViews created in the portal which rendered fine. But suddenly, the iViews started behaving weirdly - they started flickering, as though the iView is being refreshed again and again so the display never finishes rendering anything. If I put on my headphones, I can hear the tap sound which you hear when you hit "Refresh/F5" on IE. This means for some reason, the iView is automatically refreshed and I don't know why.
If I go to the WebDynPro App URL directly, everything seems to work fine. Also, I created a fresh new iView just to see if my old iViews are messed up, but the new one also flickers.
Did anyone see this? Any suggestions what could have gone wrong between the Portal and the WD app?
Any help is appreciated!
Thanks,
KiranHere's the URL
http://<portal>:<port>/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!3aportal_content!2fcom.<company>!2fContent!2f<project>!2fGS!2fiViews!2ftest?sap-config-mode=true
We wondered if the iView started falling apart after some strange logic was added to our WebDynPro ABAP code, so to test this we created a very simple app just displaying a 'hello' message. Even this app fails when an iVIew is created and previewed. The app works fine run directly on se80.
There should be some thing wrong with the portal itself.
Thanks,
Kiran
Maybe you are looking for
-
How to do manual iPad update???
My in-laws are fully dependent on their iPad to the point that the laptop they own very rarely gets turned on. This causes a separate issue to the one raised in this post in that when I visited them last week their iPad had not been backed up and syn
-
I'm using an iPhone 4S with iOS 5.1
-
My developer is having a couple of different issues. First, we have two databases, both are 10.1.0.3. Using Forms Builder 6i he can connect to instance A, but gets an error that shuts down Forms Builder when connecting to instance B. The only differe
-
IMS 5.2 WINNT - SIEVE file TEMPLATE
Could anybody direct me to/mail me like a tempalte imta.filter - that is for the general MTA stream? I would then naturally have to tune it to stop the incoming spam harassing us the most. Niels Ebbesen Bornholms Gymnasium Bornholm Denmarl
-
I have lost my copy of Snow Leopard and can't upgrade. All my backups were performed with that copy that I don't have anymore. The thing is that I had to reformat my iMac restoring to its factory settings and reinstalling Tiger all over again and the