Personalization Server and Clustering
Hi:
Is anyone running the Personalization server in a clustered enviroment.
Thank You
David L. Wasler
[email protected]
Hi David,
Our developers and QA have run it in a clustered environment when we
certified the WLCS 2.0.1 release for clustering, but perhaps someone in the
field would like to share their experiences?
Ture Hoefner
BEA Systems, Inc.
1655 Walnut Street; suite 200
Boulder, CO 80302
www.beasys.com
Similar Messages
-
Personalization Server And XML Parsers
hello there,
I am a new user of Weblogic commerce suite 2.0.
WE want to develop a portal by using above mentioned S/W. We want to get news from Reuters(which is XML data) and want to show it on our page. For this purpose do we need a XML parser or WLCS has in built support for this ????
Regards
abhishek dYou can mix CMP and BMP beans. You could deploy the various
personalization server related beans as bmp and then use CMP for the
components.
Jeff Wang
WLCS 2.0 Software Engineer
helder alexandre wrote:
>
Hi,
What I would like to do is the deployment with MS SQL Server with cmp.
But I think it isn't possible because for the personalization server there isn't
the -bmp- version of the jars, if you check the weblogic-cmp.properties and
weblogic-bmp.properties for the personalization server are deployed the same
jars.
I've made some research and find out that the jars are the same and that the
beans of usermanagemet are always bmp.
Thanks.
Helder
Mike Horn wrote:
there should be an oracle script in welogiccommerce\db\oracle that you can
use to create the database; then set your deployment set to BMP and make
sure that the ejb jars that you deploy are the -bmp- version
"helder alexandre" <[email protected]> wrote in message
news:[email protected]..
I will follow this question in w.d.interest.commerce.
But the same applies to MS SQL Server, because we have a driver jdbc forthat
dmbs ?
Thank You.
Helder
Jeff Wang wrote:
repeated from a post I made on tuesday in the w.d.interest.commerce
newsgroup:
I would suspect that the easiest way to do CMP in oracle is to take the
Cloudscape SQL file, and change all the serialized data types to
BLOBs... Not having personally done it, I don't know how painful it is
to do, but CMP should work relatively fine. Of course, if you have your
own data-mapping, that would be great too. There's nothing stopping you
from doing CMP on Oracle, other than the data schema, that is...
Jeff Wang
WLCS 2.0 Software Engineer
helder alexandre wrote:
Hi,
Have someone tried to install the Personalization Server with
container
managed persistence (cmp) in another DB than Cloudscape ??? Can the
Personalization Server be installed with Oracle and cmp ?
And for instance MS SQL Server ?
Thanks in advance,
Helder -
Personalization Server and DBMS
Hi,
Have someone tried to install the Personalization Server with container
managed persistence (cmp) in another DB than Cloudscape ??? Can the
Personalization Server be installed with Oracle and cmp ?
And for instance MS SQL Server ?
Thanks in advance,
HelderYou can mix CMP and BMP beans. You could deploy the various
personalization server related beans as bmp and then use CMP for the
components.
Jeff Wang
WLCS 2.0 Software Engineer
helder alexandre wrote:
>
Hi,
What I would like to do is the deployment with MS SQL Server with cmp.
But I think it isn't possible because for the personalization server there isn't
the -bmp- version of the jars, if you check the weblogic-cmp.properties and
weblogic-bmp.properties for the personalization server are deployed the same
jars.
I've made some research and find out that the jars are the same and that the
beans of usermanagemet are always bmp.
Thanks.
Helder
Mike Horn wrote:
there should be an oracle script in welogiccommerce\db\oracle that you can
use to create the database; then set your deployment set to BMP and make
sure that the ejb jars that you deploy are the -bmp- version
"helder alexandre" <[email protected]> wrote in message
news:[email protected]..
I will follow this question in w.d.interest.commerce.
But the same applies to MS SQL Server, because we have a driver jdbc forthat
dmbs ?
Thank You.
Helder
Jeff Wang wrote:
repeated from a post I made on tuesday in the w.d.interest.commerce
newsgroup:
I would suspect that the easiest way to do CMP in oracle is to take the
Cloudscape SQL file, and change all the serialized data types to
BLOBs... Not having personally done it, I don't know how painful it is
to do, but CMP should work relatively fine. Of course, if you have your
own data-mapping, that would be great too. There's nothing stopping you
from doing CMP on Oracle, other than the data schema, that is...
Jeff Wang
WLCS 2.0 Software Engineer
helder alexandre wrote:
Hi,
Have someone tried to install the Personalization Server with
container
managed persistence (cmp) in another DB than Cloudscape ??? Can the
Personalization Server be installed with Oracle and cmp ?
And for instance MS SQL Server ?
Thanks in advance,
Helder -
Need api docs for personalization server and 5.1 server
Hi,
I can't seem to find the javadocs for the apis described above...can
someone please help?
thanks
Neelam Checknita ; ~ )Javadoc:
WLPS 2.0: http://e-docs.bea.com/wlcs/javadoc/p13n/index.html
WLCS 2.0: http://e-docs.bea.com/wlcs/javadoc/comp/index.html
WLS 5.1: http://www.weblogic.com/docs51/classdocs/javadocs/index.html
Main docs:
WLPS/WLCS 2.0: http://e-docs.bea.com/wlcs/index.htm
WLS 5.1: http://www.weblogic.com/docs51/resources.html
If you have a slow internet connection then download the docs at
http://www.beasys.com/download.html
Ture Hoefner
BEA Systems, Inc.
2590 Pearl St.
Suite 110
Boulder, CO 80302
www.bea.com -
Starting Commerce Server and Personalization Server
I am trying to evaluate these products. I am running NT 4.0, SP5 with
256MB RAM. I have installed Weblogic Server 5.1.0 with SP 6. I have
installed the latest version of the Commerce Server and Personalization
Server. I had to remove the -server switch from the java command line in
the startup script in order to get the JVM to start. The Commerce server
begins to initialize, then a bunch of exceptions are thrown, then it
shuts itself down.
I have attached the log file
WeblogicCommerceServer3.2\server\weblogic.log
Thanks for any help on this.
[weblogic.log]The error in your weblogic.log file of:
2001:<E> <T3Services> COMMERCE_SERVER_FRAMEWORK,LOG_ERROR,"Current WebLogic build may
not be compatible with the WebLogic Commerce Server implementation. Minimum Build:
83914 Current Installation Build: 66825"
Tue Apr 24 16:50:53 EDT
means that WLCS cannot find the correct service pack files for WLS 5.10. Might check
to see if the WLS 5.10 SP6 files (weblogic510sp6.jar and weblogic510s6boot.jar) are
located in d:\weblogic\lib.
Ted
jcerruto wrote:
I am trying to evaluate these products. I am running NT 4.0, SP5 with
256MB RAM. I have installed Weblogic Server 5.1.0 with SP 6. I have
installed the latest version of the Commerce Server and Personalization
Server. I had to remove the -server switch from the java command line in
the startup script in order to get the JVM to start. The Commerce server
begins to initialize, then a bunch of exceptions are thrown, then it
shuts itself down.
I have attached the log file
WeblogicCommerceServer3.2\server\weblogic.log
Thanks for any help on this.
Name: weblogic.log
weblogic.log Type: Text Document (application/x-unknown-content-type-txtfile)
Encoding: base64 -
Multiple call managers and clusters sharing one application server
Hi
I need to program my application such that it can be shared by multiple call managers and clusters. That is, I can only have one application server, and as a result I need to tell my application from which call manager / cluster this "request" is coming from.
My question is how do we do that? do we have access to some parameters / variables, similar to "#DEVICENAME#", which can be used to pass the call manager identity to the application?
TIAUse multiple instances of your application with different URIs (assuming the instances will not have to talk to each other), then, when configuring the service on each cluster, simply reference the specific URI of the application instance for that cluster. eg: Using Tomcat to host the PhoneMessenger application for Cluster1 and Cluster2, Deploy the same application twice: PhoneMessengerForCluster1 and PhoneMessengerForCluster2. The service URL on Cluster1 might be: http://app_server/PhoneMessengerForCluster1/servlet/PhoneMessenger , and for Cluster2 it could be http://app_server/PhoneMessengerForCluster2/servlet/PhoneMessenger
-
Cluster and Personalization server
Hi:
How do I set my Personalization/Portal server up to work in WL cluster ?
Thank You
David L. Wasler
[email protected]It's just like setting up Weblogic Server (WLS) in a cluster. The Weblogic
Personalization Server (WLPS) is a framework built on top of WLS. Check the
administration documents at
http://www.weblogic.com/docs51/cluster/index.html
Ture Hoefner
BEA Systems, Inc.
1655 Walnut Street; suite 200
Boulder, CO 80302
www.beasys.com -
WLS Plugin and the Commerce/Personalization Server
Hi,
Just wondering if the plugin which controls loads balancing can be used with
the Commerce/Personalization server ?
I have tried it ,but the way the portals works, the IIS server have no file
extensions to work with as a portal address is http://ip:port/portalname".
It doesn't have a file extension obviously, so the IIS box can invoke the
plugin.
Just wondering if anybody else has tried to get it working or it the plugin
merely designed to work with the 5.1 WLS server ?
Cheers
MickHi,
Just wondering if the plugin which controls loads balancing can be used with
the Commerce/Personalization server ?
I have tried it ,but the way the portals works, the IIS server have no file
extensions to work with as a portal address is http://ip:port/portalname".
It doesn't have a file extension obviously, so the IIS box can invoke the
plugin.
Just wondering if anybody else has tried to get it working or it the plugin
merely designed to work with the 5.1 WLS server ?
Cheers
Mick -
Personalization server & Sybase.
Did anyone try to run the WebLogic Personalization server against Sybase
instead of Cloudscape? How easy is it to install the configuration tables in
Sybase? Do I need to make any changes to the installation scripts that come
with the product?
Thanks.Hi David,
Our developers and QA have run it in a clustered environment when we
certified the WLCS 2.0.1 release for clustering, but perhaps someone in the
field would like to share their experiences?
Ture Hoefner
BEA Systems, Inc.
1655 Walnut Street; suite 200
Boulder, CO 80302
www.beasys.com -
Server 2012 Clustered Hosts - How can I place a Hyper-V Guest in the DMZ?
I have 3 server 2012 hyper v clustered hosts. I've been recently asked to create a VM where external parties will have local admin rights. I've been resisting things for a variety of IMO valid security reasons. What I'm trying to understand is if it would
be possible to build a guest VM that was not part of our domain and put in our firewalls DMZ zone. In this way these folks could be local admins but there's be no connection with the internal network.
In a single host environment if I'm understand things correctly I'd create a external type virtual switch, connect it to a specific physical network card on my host and then connect that card to my switch's DMZ port. But my environment is clustered... does
that mean I'd designate a physical network card on all 3 hosts, connect them to all the same named external virtual switch and plug all 3 in to DMZ ports on my firewall? Could I also instead of plugging all 3 in to DMZ ports on my firewall plug all 3 into
some little rinky dink 4 port gigabit switch and then plug that in to my firewall's dmz port?Hi,
When your guest vm using the external vswitch, it can be considered as the physical host, therefore it has the physical network features, in the DMZ zone we often create the
decided subnet for the security reason. Therefore the decide NIC is needed, it will used for the Hyper-V host VLAN settings.
When considering Hyper-V for server consolidation in a DMZ it is recommended not to run VMs of vastly differing trust levels on the same physical host in production environments
(i.e. do not consolidate all DMZ boxes on one physical host).
Instead, the recommendation is to consolidate all the front-end boxes on one physical server and do the same for the back-end, depending on the workloads.
More information:
Hyper-V 2008 R2: Virtual Networking Survival Guide
http://social.technet.microsoft.com/wiki/contents/articles/151.hyper-v-2008-r2-virtual-networking-survival-guide.aspx
Hyper-V: What are the uses for different types of virtual networks?
http://blogs.technet.com/jhoward/archive/2008/06/17/hyper-v-what-are-the-uses-for-different-types-of-virtual-networks.aspx
Understanding Networking with Hyper-V
http://www.microsoft.com/downloads/details.aspx?FamilyID=3FAC6D40-D6B5-4658-BC54-62B925ED7EEA&displaylang=en&displaylang=en
VLAN Settings and Hyper-V
http://blogs.msdn.com/virtual_pc_guy/archive/2008/03/10/vlan-settings-and-hyper-v.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
WSS security and clustering in SOA Suite 11g
We are calling one composite from another as a reference. Both are on the same clustered domain.
We are using AIA WSDLs so there is a default WSS username password token as policy.
While on the single server domain, we do not need to pass the credentials since request was going on the same Weblogic server and it was running fine.
But when we moved to the clustered domain, we changed the endpoints in composites to an external hardware load balancer and now it needs the sercurity credentials because the request is coming via the load balancer running on the different machine.
I have two queries:
1. Is there a way we can skip external load balancer while calling composites within the same clustered domain and still be able to route the requests to all managed servers instead of only one? (may be there is a way we can provide multuple URLs in the composite somehow or any other setting on cluster which would enable us to send all the requests to a common hostname which will route it to multiple managed servers in round robin)
2. If above is not possible then we will have to use the external load balancer, in which case I need to set username password tokens while calling different composites. I need help in configuring this. It would be nice if anyone can provide me a link to a sample may be.
ThanksIn 11g, Oracle WSM Agent has been integrated into Oracle WebLogic Server. Please refer below link for more details -
http://docs.oracle.com/cd/E15523_01/web.1111/b32511/intro.htm
Regards,
Anuj -
P13N Server and App Server on separate systems - strange ports opened
Hi -
We have a configuration using WebLogic Personalization Server 3.1.1 on one
server and WebLogic Application Server 5.1 w/Service Pack 6 on another
server. What we've seen with our firewall configuration is that it appears
there are high-number random ports opened occasionally from the App Server
to the P13N Server, which d not appear to be related to connection attempts
(ex: port 42100). The only communication that we know should be happening
between the two systems are T3-based JNDI lookups, LDAP lookup/update
requests, and SQL queries. My questions, then, are as follows:
1) In handling JNDI requests, are there any callbacks that can occur between
the two servers in this configuration on a different port?
2) When separating the P13N Server and App Server, are there any "private"
ports opened between the two systems for management? As far as I know, the
App Server should simply view the P13N Server as another client, but the
firewall log would indicate that something is going on related to this.
If anyone has a similar config and can provide some info related to
potentially unseen port connections, please let me know. Thanks in advance!
Andy
[email protected]
Haakon,
I think the BPEL forum is the better source to ask
BPEL
Frank -
I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
single Windows Server Failover Cluster (WSFC) that spans two data centers.
If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Failover Cluster) in the secondary disaster recovery data center automatically with some script.
I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
If that IP is unable to respond then script can be able to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)
Can you please guide me for script writing for automatic failover in case of primary datacenter outage?please post you question on failover clusters in the cluster forum. THey will explain how this works and point you at scipts.
You should also look in the Gallery for cluster management scripts.
¯\_(ツ)_/¯ -
Error starting Server with Clustering License
Hello
I was using WebLogic Application server ver 6.0 evaluation copy
and everything was working fine. When I have updated the license
to use the clustering capabilities of Weblogice server , I was
not able to start the weblogic server and the server was throwing
following exception.
Throwable: weblogic.server.ServiceFailureException: Cluster service
- with nestd exception:
[java.net.SocketException: Unknown error]
weblogic.server.ServiceFailureException: Cluster service - with
nested exception:
[java.net.SocketException: Unknown error]
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:446)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:170)
at weblogic.Server.main(Server.java:35)
'>
I haven't configured any cluster on my server.
Do I have to do anything beside running upgradeLicense command
using the new locense. Is there anything I am missing here.
Thanks in Advance
Sunil
Just to be clear, the WLS 6.0 software downloaded from the web site is
the full product and supports clustering, in-memory replication, etc.
The evaluation license packaged with the software does not provide keys
to enable these features. To evaluate these features, you need to
contact your BEA sales person to get a license to turn these features
on.
Kent Kong wrote:
> hi ,
> If your wls6.0 is downloaded from the website of bea, it doesnot
> support cluster service.
> You should ask our sales for a complete one.
>
> Otherwise ,maybe the version of the server in your cluster
> is not the same.
>
> Kent Kong
-
Mixing BE6000 UCS Server and "normal" UCS server in the same deployment
Hello,
I have been handed a project which has one high density BE6000 UCS server and a separate UCS C220 M3 server. The latter server was included to host a MediaSense call recording system but this will only use 2 of the available 8 vCPUs on the UCS C220 M3 server.
The total number of users is 200.
I want to implement a resilient system and so would like deploy two servers in a cluster for each of the following applications:
CUCM 10.5
Unity Connection 10.5
IM & Presence 10.5
As well as these applications there will be UCCX 10.6 and Cisco Unified Attendant Console Advanced (10.5) but these will be deployed as single servers.
Looking at the UCS servers they have capacity for me to split the CUCM/CUC/IMP clusters between them.
I cannot see any technical reason why this will not work but do not want to be caught by any Cisco support policies.
If I were to implement the system in this way would there be any issues with the deployment or getting support from TAC.
The separate UCS C220 M3 server has 8 x 8GB RAM (64 total) and 8 x 300GB HDD plus a quad Ethernet card.James first of all I am not sure I understand your query in detail. Do you mean you have two UCS220 M3 servers? and one of them is currently running BE6000?
Having said that, the key here is to carefully plan your deployment against the capacity of the servers you have,.
Eg..Deploying 200 Users, using the ff OVA
UCS 220 M3 server 1: (using default TRC ie 8vCPU with 8GB per vCPU)
Publisher (2500 cucm OVA): 1vCPU (6GB RAM), 80GB HD
IMP-Publisher (1,000 OVA) :1vCPU(2GB RAM), 80GB HD
CUC-publisher (1,000 users OVA) :2vCPU(6GB)--NB 1vCPU is reserved for ESXI, 160GB HD
UCCX-Master: (300 agent OVA): 2 vCPU (8GB) and 292GB HDD
With this placement you have a total of 22GB RAM and 612HDD used up
A break down is shown below..
Server
Server Name
C220 M3S TRC#1 (Medium)
C220 M3S TRC#1 (Medium)
Application Short Name
Application Long Name
Release
VM Name
vCPU
vRAM
vDisk
CUCM
Unified Communications Manager Release
10.x
CallCtrl: 2,500 users
1
4
80
IM&P
IM & Presence Release
10.x
1,000 users
1
2
80
CUC
Unity Connection Release
10.0
1,000 users
1
4
160
ESXi
Unity Connection
ESXi
1*
CUCCX
Cisco Unified Contact Center Express / Unified IP IVR Release
10.x
Main: 300 agents
2
8
292
ESXi
VMware vSphere ESXi
5.5
4**
* Note: This is a 1 physical CPU core per host regardless of the number of Cisco Unity Connection (CUC) VMs.
** Note: This is 4GB physical RAM per host.
Maybe you are looking for
-
How to refer parent node when we are at child element ?
Hi members, how everbody is fine. i have one question. i have four group in my template. i am doing group total at the end of each group. at the end of each group i want to check that if group A then store group total in variable XX. if that group to
-
Having just upgraded my old C1-01 to a Lumia 520, I'm massively disappointed at the lack of basic instructions supplied with the phone. For instance: 1. I called the number to register the phone and was asked to press button 1 - but where's the keybo
-
Dought in MIRO doc riversal -urgent
Hi, I need clarification on the follwoing scenario i had cancelled a MIRO doc due to user request of saying that he had wrongly assigned the VAT component. when i had riversed this MIRO doc system had generated a new doc number (credit memo) an
-
I love the iPod; I love iTunes, etc......but when I'm listening in the car using an iTrip, the ambient noise in the car makes the soft passages too quiet. Of course, turning up the volume just makes the loud passages too loud. This is especially trou
-
No amount tolerance entered for company code
Hi, I am trying to Post G/L account using F-02. I am getting following error 'No amount tolerance entered for company code xxxx' Can anyone help me on this? Note: I have already defined tolerence group. Thanks, Shalini