Personalization - Site level, and not able to see it a resp level

I have added 2 new fields i.e. Field A and Field B to an Oracle seeded page at Site Level using Personalization. Based on the type of responsibility, I want to render one field at a time. I wanted to do this using responsibility level personalizations. However, I do not see these 2 fields when I try to personalize at responsibility level. What could be the issue?
EBS version 12.1.2
Thanks.

Hi ,
Fields will be created at site level through personalization ,it will appear for all the responsibility ,once u will go to a page using a particular responsibility ,again you personalize the field and can set the rendered property false for all level except that particular responsibility .
Thnax
Pratap

Similar Messages

I am not able to see my interface in ID.

Dear All,
At present i am doing File to IDOC scenario.I am using Business Service for my Sender,and i am using EXISTING Business System for my receiver.For my Business Service,i opened the Business Service, i added my interface ,no problem for me.
Coming to Business System i am unable to see my IDOC interface while doing Interface Determination.
For this problem i gone through several forums there i got information that,
We have to install our Software Component in Our Business System in SLD.That part i am not able to do.Can anyone please help me in this issue?
At present in my Business System my software component is not there.Someother's Software Component is there,that's why i am able to see their interfaces,and not able to see mine in ID.
Thanks in Advance.
Regards,
Ramana.

hi venkata,
Check for these in configuration
1) For IDoc Scenarios for an R/3 System, you need to create a Technical System.Check that you hav created or not
2) If you are doing it from scratch create a business system and new product -> software component.
3) Assign this business system to ur Techincal system.
If suppose all the required TS, BS are already present
Then come to BS in ID- Configuration Time,
Click on the business system and select the tab for receiver (Inbound), add the IDoc Interface here, and then you will be able to view the interface
Regards
Ramesh P

Not able to see the crystal reports XI version in the IE 7 and IE 8

Hi Team,
I am using web based application developed in VB,ASP,SQL SERVER,Crystal Reports(XI). I am able to see the Crystal Reports in IE 6. But i am not able to see the reports in IE 7 and IE 8. While clicking on the reports button it is showing the red X image top left cornor.
I am using CrystalActiveX viewer11 version for viewing the reports.
In IE 6,if the client using fiirst time for vieiwing the reports,it will ask the Activexviewer control prompt and says ok,it will display the reports.
Thanks and Regards
Eshwar

Thanks your advise.But we are using following crystal reports (XI) version and we don't have CRXI with R1 and R2.
CurrentVersion:11.0.0.895 ( CR Developer and Product Type:Full)
Crystal Reportviewer11 configured in the IIS which is version (5.0). and configured the virtual folder to C:\Program Files\Common Files\Business Objects\3.0\crystalreportviewers11\.
Our web application code also configured in the IIS at same level.
When the user wants to see the reports through the application,it will ask the Plugin of Crystal Report Viewer and user will download this plugin and it will save in the IE plug ins.It will ask only first time viewing the reports for the next onwards it will not ask or prompt of the Activex control.
So please suggest me, is there any upgrade version of this Crystal Reportviewer11 needs to be installed or any browser setting need to be configured for IE 7 and IE 8.
waiting for your reply.
Regards
Eshwar

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

Hi CMorenoOT,
This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/HT2731
Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
- Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
- Once you've filled out all of the fields for your billing information, tap Next.
For more information:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
Thanks,
Matt M.

Not able to see Beat Audio software and mute light not glowing on fresh windows 8

Hi,
I am using Laptop : HP ENVY 4 1046tx. I have installed fresh windows 8 on it. After that I have downloaded audio software from HP software site but that driver is not accepting.
1. I am not able to see Beat Audio software and equalizer setting in control pannel.
2. When I am pressing mute button mute light (red light) is not glowing on button
Thanks,
Prabhat
This question was solved.
View Solution.

Try the IDT Audio driver here:
http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58635.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Gnome panel 3.2 - I am not able to see clock and date well

Hello all,
I am using Gnome in fallback -mode. I upgraded my gnome-panel to version 3.2 and after upgrading I am not able to see date and time information well. This information have shown a dark grey color, which is very difficult to see because background is black. If I put my mouse cursor on the time panel I am able to see infromation because background changes from black to white (timebox get activated). Is there any way to change font/foreground colour from grey to white? It is very irritating put mouse cursor on the date everytime when I want to see time. I tried to downgrade panel back to 3.0 version, but after that I wasn't able to see panel at the all.
-Br, Marko
Last edited by tetrao (2011-10-05 15:27:36)

Looks like I am not a lonely wolf with this problem: https://bugzilla.redhat.com/show_bug.cgi?id=691288
Maybe I just need to wait next version of gnome-panel
Strange here isn't anybody others at this site, who have this issue..
Last edited by tetrao (2011-10-05 15:55:54)

Not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c

not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c
But i'm able to see other IKM's please help me, how can i see them

Nope, It has not been altered.
COMPONENT NAME: LKM Oracle to Oracle (datapump)
COMPONENT VERSION: 11.1.2.3
AUTHOR: Oracle
COMPATIBILITY: ODI 11.1.2 and above
Description:
- Loading Knowledge Module
- Loads data from an Oracle Server to an Oracle Server using external tables in the datapump format.
- This module is recommended when developing interfaces between two Oracle servers when DBLINK is not an option.
- An External table definition is created on the source and target servers.
- When using this module on a journalized source table, the Journaling table is first updated to flag the records consumed and then cleaned from these records at the end of the interface.

Apple TV and iTunes not able to see each other

I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
"I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
Good luck.

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
Please suggest a solution or @Apple please get a software release which can remove this bug .

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

My firefox webpage now opens up as a whole page and I am not able to see any any menu bars

All of a sudden my firefox webpage now opens in the whole window and I am not able to see any menu bars in the top or the "start" icon in the bottom of the screen

Toggle Full Screen mode on/off with F11 -- very useful keyboard shortcut.
References:
* http://dmcritchie.mvps.org/firefox/keyboard.htm
* http://kb.mozillazine.org/Resizing_oversize_window
* http://kb.mozillazine.org/Resizing_oversize_window
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

Not able to see the Person who posts reply and asked the question.

Hi,
I am facing issue with Posts in MSDN forum. I am not getting the name of Person who replied and asked the question which earlier used to come below the Post.
Are all facing the same issue? I am using IE 8 and Google Chrome 33.0.1750.117 m.
Can anyone please help.
One good question is equivalent to ten best answers.

I am using Google Chrome Version 33.0.1750.146 m (updated today). I am seeing names fine.
It may be also your connection speed and some extra add-on you have.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles
My Google Chrome is also updated to 33.0.1750.146 m, and I am using high speed internet connection in my organization, but still I am not able to
see poster details. Even there is no data coming below
"Asked by:" section at Top left corner of MSDN Forum.
One good question is equivalent to ten best answers.

Not able to see material and operation overview as tab in production order

Hello Friends,
While creating the production order by T.C CO01, after giving the material code , production plant and order type, system took me inside it.There i am not able to see component overview, operation overview as tab.Whereas in menu option Goto - overview - component , i can see there.But i want this things as tab in screen where we give qty and dates.
So guys do you know where to do configuration for it.
Thanking you guys in ad

Dear Jitendra,
In Production Order you will find Component and Operation screen under two different icons (not tab) production Header screen.
- For Component Overview it is something like Balance or on pressing F6 you will branch to Component overview Screen.You will find it just after Hat icon
- And for Operation over view it looks like ladder or on pressing F5 you will branch directly to operation screen.you will find this icon just after Component overview Icon.

I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for thi

I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for this file DSC-ARW. Whatelse I should be doing to see my pictures? Can someone help?
Anita

The support for that camera was added in the very latest release of Lightroom, version 5.7.1. Having downloaded Camera Raw 8.7.1 will have no effect on Lightroom because Lightroom doesn't use the Camera Raw plug-in. You need to make sure you have updated Lightroom to the very latest release in order to have support for that camera.

Why am i not able to see images on some web sites, using safari 5.1.7. I have enabled the tab to display images.

Does anyone know why I am not able to see images on some web sites using safari 5.1.7?
I have enabled the apperance tab to display images.

Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

I am trying to communicate with third party instrument via usb but I dont know how to do it even in Ni-max I am not able to see usb port symbol in Devices and Interface section.

hello,
I am tring to communicate my Powersupply which is not from Ni via USB cable ,but I am not able to see my connection or usb symbole in Ni-max .
first time I am using this will you please guide me,and is there any driver i need to download for that?here I put one attachment regarding to this.
Thanks in advance.
Solved!
Go to Solution.
Attachments:
usb is not detected.png ‏182 KB

ya I know that,
thats y i asked you that y it is so because i am not able to see that usb port here i can see that much only.
thats y i got confused.
and I can see my hameg connection in my control panel and also in device manager.
http://www.hameg.com/drivers.0.html?&no_cache=1
this is website for hameg driver in that product select hmp4040 than hmp4000 list will open in that i have download third one in which plug and play is given.
or here i send my vi it might be helpful.
Attachments:
hmp4040 Output DC Volts.vi ‏17 KB

Personalization - Site level, and not able to see it a resp level

Similar Messages

Maybe you are looking for