Personalize Flex : Descriptive Flex ... in HRSS

Gurus
Hi,
I need your help.
In extra information of employee for HRSS, we have assigned personlaized Personalize Flex : Descriptive Flex ... by specifiying a segment value of EIT (employee loan request). When we press add to use this extra information, on next page again type field is available, which contains all the EIT available to that responsibility and user can selelct anone EIT to proceed.
I need to make read only this field, or this fheid should not display. only the field of this extra information (employee loan request should be available)
Pls help

Hi Muhammad,
When you are personalizing the EIT you need to personalize the segments against the page.That means you need to personalize the segment in the each page. Then only you will not be able to see those segments. I faced this problem in my one of project and resolved by personalizing each page.
Thanks and Regards,
Joshna.

Similar Messages

How to attach a Key Flex Field to Descriptive Flex Field

Hello,
I would like to know how to attach a Key Flex Field to Descriptive Flex Field(when I click my DFF, I should see my accounting KFF values) using forms personalizations in 11.5.10. It would be great if someone could help me.
Thanks,
SJ

I'm not sure what you mean by referring to forms personalization. If your requirement is simply to be able to enter an accounting KFF via a DFF then you need to attach a value set of type 'Special' to your DFF segment. These are much trickier to get right than other value set types so I would suggest some careful reading of the flexug and also taking a look at some of the seeded value sets of this type.

Issue with Supplier site descriptive flex field upgrade from 11i to R12

We ran into some issue when upgrade Supplier site descriptive flex field from 11i to R12.
In 11i. we defined descriptive field on JG_PO_VENDOR_SITES. in the segment definition, we defined one of the attributes default value based on Form Field Value, and the statement is like this:
SELECT decode(:SITE.COUNTRY,'IT','AP ITALIAN TRANSACTIONS','AP AUTOFATTURA') FROM dual
All above worked fine in 11i, whenever the flexfield field is open in forms, the default valuse shows based on the real-time value in :SITE.COUNTRY.
In R12, Supplier site management is in HTML format. There is no forms, which means no form value. Do you have an alternative soluction for implement the same logic in R12?
Thank you and regards,
Kate
Edited by: user12100435 on Feb 12, 2013 9:06 AM

Kate,
Have you logged a SR and see if Oracle support can help?
Thanks,
Hussein

How to create a Tip for a field in a Descriptive Flex Field in Self Service

How to create a Tip for a field in a Descriptive Flex Field in Self Service ?
Example :
For Address
Each Address Line should have one Tip.
What should I do ?
Thanks,
John

Hi John,
It seems you have created Address Location DFF in self service in OA Framework.....
I have created a Address Location flex in OA Framework . It dipslays the segments properly but i dont want to display the segments if they dont have any value.
I only want to display segments with values . The segments with null values should not display at all...
i.e , if Address Line 2 value is null , it should not display Address Line 2..
If you have done this, pls let me know how to go abt it.
Thanks in Advance,
Tanveer

I need to Import Descriptive Flex Field from EBS to OBIA

Hi
we implemented OBIA 7.9.6.3 as Procurement and Spend Analytics
there is some Descriptive Flex Fields i want to import
for example :
we have DFF on PO_HEADERS carries some information on the POs i need to import it into OBIA Datawarehouse and RPD
So , anyone have an idea to help me in this ?
Thanks
Ahmed

Ahmed,
if you dont want to edit any mapping, then you can populate the data into some un-used column in the ETL and change the name of the column in RPD.
Though this is not a good approach, but you can try this.
Mark if helpful.

Self Service Personalization Making a Flex Required

I have added a flex field into my self service pages for iProcurement/Requisitions and it is working fine. The user base would like the field to be required but we cannot require it at the DFF definition because that would break PO's for us. Is there a way to make this field (a simple poplist of 4 values) to be required in Self Service pages without checking it as required in the FF definition? I see other field types like a Messgae Choice and the like have a "required" attribute, but the Flex does not.
Any thoughts?

I haven't been able to get this to work. I'm trying to change the Returns form in Receiving to force the user to enter a reason code when they do a return. When does the WHEN-VALIDATE-RECORD event occur? Is it when you press SAVE? I've set it up to give the user an error message when the reason_code field is null, but it's not working. It allows me to save with a null reason_code.
Thanks for your help.

Changing descriptive flex field value

I have looked and looked through the flexfield functions in the administrative responsibilities and cannot find the field I'm looking for to change the label for a flexfield. The navigation path to get to the flexfield is below:
AR RECEIVABLES MANAGER responsibility > COLLECTIONS > CUSTOMER ACCOUNTS > ENTER CUST # and find > CLICK CUSTOMER BUTTON > CLICK DFF FIELD IN UPPER RIGHT TO VIEW FLEXFIELDS
Can someone tell me how I can find the descriptive flexfield's name (Help->Diagnostics maybe?) and search for this thing to change it? Which fields do I need to search for in which form? I have tried searching everything I know to search.
Thanks!

Let me try to help you.
Why I did was drilled down to DFF in Application Developer Responsibility.
1) Flexfields --> Descriptive --> Register.
2) Query for "Receivables" in Application Field and "Customer Information" in the Title field.
If you wana see the segments for the particular DFF
1) Flexfields --> Descriptive --> Segments.
2) Query for "Receivables" in Application Field and "Customer Information" in the Title field.
3) Segments Button. Before you change the name the segment or add additional segment Uncheck Freeze Flexfield Definition
Let me know if its good enough.
Sachin

Can standard workbooks for Process Manufacturing support descriptive Flex?

Can standard workbooks for Process Manufacturing support descriptive Flexfields in Discoverer 10i??
I'm not sure if that is so, and I wouldn't want to create views and folders and then realizing that it could've been done in a standrard fashion.
Can anyone help me please. My email is [email protected]
Thanks
Rafael

Hi,
The question is too generic. Can be specific with examples?
To answer your query, every movement of the goods at stage of WIP can be analysed with the conversion costs incurred till that stage using operation wise confirmation in SAP ECC 6.0. IT support required would that of SAP consultants from modules PP, MM and CO.
Best Regards
Vimal Vijayan

Descriptive flex feild ...

Hi,
Apps - 12.1.3
DB 11gR1..
If Receipt method is PDC Details following feild must appear in the DFF
Sales Person:ABC
Receipt Book Number:123
Receipt leaf Number:456
PDC Cheque : Y
P D C Maturity Date:18-JAN-2012
If Receipt method is not PDC Details following feild must appear in the DFF and P D C Maturity Date should be grayed out ?
Sales Person:ABC
Receipt Book Number:123
Receipt leaf Number:456
PDC Cheque : N
could any one guide me this?
Thanks

I have no idea what PDC is.
But you can create a context that says "PDC" and the values are Yes/no.
In your DFF definition, create the following for "Global Data Elements".
Sales Person:
Receipt Book Number:
Receipt leaf Number:
PDC Cheque :
And then for context = Yes, create an additional DFF called P D C Maturity Date.
If you can map PDC context to a field in the form, that is great.
If not, the user has to select a Yes/No value for PDC context.
For a primer on context sensitive DFF, see http://oracle.anilpassi.com/context-sensitive-descriptive-flexfields.html
Hope this helps,
Sandeep Gandhi

Descriptive Flex Field

Hi,
We have created DFF in PO Forms uses MTL_PARAMETERS Table in Test instance. We would like to move it to prod instance. How we can proceed further.
Regards
Balu.S

Most sites simply recreate it in the production instance e.g. follow the same steps (you documented) when you did it in test.
There are some commercial products available that do this.
Ken

Errors - drawing a text curve in flex with flex 3 with flex 3.5 framework

Is that necessary in drawing a text curve in flex we need flex 4 with flash player 10, actually i have flex 3 with flex 3.5 framework but it is showing error like this :
This is my code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Script>
<![CDATA[
import mx.components.TextView;
public var myText:String = "Read my blog @ http://www.funnyjokesfunny.com";
var radius:Number = 125;
var spacing:Number = 8;
var center:Point = new Point(125,125);
public function drawText():void {
for (var char:uint=0;char<myText.length;char++) {
var tempText:TextView = new TextView();
tempText.x = radius * Math.cos(degrees2radians(char*spacing)) + center.x;
tempText.y = radius * Math.sin(degrees2radians(char*spacing)) + center.y;
tempText.rotation = 25;
tempText.text = myText.charAt(char);
textContainer.addChild(tempText);
]]>
</mx:Script>
<mx:Button label="Draw a circle" click="drawText()" />
<mx:Canvas id="textContainer" y="50" x="50" width="400" height="400" />
</mx:Application>
1) call to possibly undefined method Text View
2) Type was not found : Text view.
Please help me
Atishay

I have now taken import mx.controls.Text;
instead of textview it works , but in dis example http://blog.shortfusion.com/index.cfm/2009/1/25/Circular-Text-In-Flex-Explained with source code they have taken textview control and it works for them for text curve.

Error in compiling Flex application - flex has expired & AAD3.mxml

I am getting below error when deployed a model to Portal (7.0) in Visual Composer (7.0):
"WARNING License Service: The evaluation period for Flex has expired; switchi
to the Developer Edition
01/04 13:21:47 INFO License Service: Flex 1.5 Developer Edition enabled
01/04 13:21:47 INFO License Service: Flex 1.5 OEM Edition enabled"
In the mean time I got below error:
"Failed to compile AAD3.mxml"
Any helps would be appreciated. Thanks.

Hi Kelly,
When you generate the coding, compile and deploy within Visual Composer, you should not get this error message. Visual Composer passes the license-key to the Flex compiler automatically.
If you take the generated coding (Action Script), manipulate it, compile it outside the Visual Composer and deploy it, then this license key is not passed and you retrieve this error. For this case you need a separate license for Adobe Flex.
Check the below wiki.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/vc/error%252bin%252bcompiling%252bflex%252bapplication
Regards
Basheer

Unknown Flex SDK: "Flex 3.1"

I just upgraded my flex to Build 3.0.2.214193 and I get the following error when i import my project archive. Why is that. Is there anything i need to change?

In Flex Builder menubar:
Project - Properties - Flex Compiler
Then select the SDK or else select Configure Flex SDKs and navigate to the C:\Program Files\Adobe\Flex Builder 3\sdks\3.2.0 folder.

Accessing Param through Flex Globals ( Flex 4 )

Part of Flex MXML Code :
import mx.core.FlexGlobals;
protected function buildModel():void
    // to access thequery string param passed from jsp file
    roomURL = FlexGlobals.topLevelApplication.parameters.roomURL;
    authToken = FlexGlobals.topLevelApplication.parameters.authToken;
can i access < param > in form of query string from JSP code
JSP Code below passsing 2 Param roomURL & authToken :
<script type="text/javascript">
      function loaded() {
    <%
      if (token != null) {
        System.out.print("Room URL IS:-> " + roomURL + "\n");
        System.out.print("Token: -> " + token);
        %>
            win = window.open(
              'meetingModule.html?roomURL=<%= roomURL %>&authToken=<%= token %>',
              '_blank',
              'left=20,top=20,width=800,height=600,toolbar=1,resizable=1');
        <%
        %>
    </script>

I am not sure of what exactly the question is.
Are you asking about how to access variables in JSP ? Or how to pass a parameter from an HTML page to a SWF ?
Here:
           'meetingModule.html?roomURL=<%= roomURL %>&authToken=<%= token %>',
you are simply passing variable to the HTML page. From there you need to use javascript to parse the query string and pass the values to your SWF.
If you look at the ExternalAuthentication examples they all do something similar.

Regarding building (ant) and debugging Flex components (Flex Builder)

I am fairly new to graniteds + flex. The example articles on graniteds and blazeds use two separate applications i.e., using mxml components and actionscripts in another project. Why is this done so?
It was hard to build the swf files in a separate project as the antscript needed something more.
<mxmlc....>
<source-path path-element="${basedir}/src"/>
</mxmlc ..>
The source here is the actual java source code. Unless I had the two projects together, I could not build the swf files. However, once I convert this one application to a java project, as flex project does not recognize java source code, I can no longer debug my flex screens. Am I missing something here?
Help
Krishna

No suggestions yet?
Could someone tell me if I could integrate these in one place atleast, if so how do we configure the application to be able to debug Flex applications?
Thanks
Krishna

Personalize Flex : Descriptive Flex ... in HRSS

Similar Messages

Maybe you are looking for