Personas Login not working

After upgrading Personas 2.0 to SP02, I'm encountering an issue when trying to log in to the system. There error displayed is:
After searching this error, note 2016378 is show as a fix, but I have that note successfully implemented already. In fact, I've implemented ALL the notes listed in the cumulative note for Personas (1964257).
The configuration check tool show no issues as at all and i've successfully tested the restgui service.
Also, I've noticed that if I log into my default client (100) and get the system selection screen I'm able to access all the clients without issue. Log in works. If I try to access either of the clients directly (direct link not via system selection screen), I get the error mentioned above. Does anyone have any ideas or suggestions? My next step is to open an OSS, but I figured I'd ask here first.

I de-activated and re-activated the restgui service (tcode: SICF) in both clients and the error still persists.

Similar Messages

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

  • Personal hotspot not working after upgrading to ios7

    Personal hotspot not working after upgrading to ios7

    I was having this problem (iphone 5 wouldn't work as hotspot for my PC laptop) and had tried everything suggested on these message boards, so I finally went to the Apple Genius Bar and they fixed it for me.  Here's what they did:
    1) Turned the Hotspot off on my iphone
    2) Went to the Control Panel on my laptop to "Network and Internet" > "Network and Sharing Center" > "Manage Wireless Networks" (on the left navigation panel) and deleted my iphone from the list of WiFi connections I've attempted.
    3) Flipped the manual WiFi switch on my laptop to Off and then back On again (to reset it)
    4) Turned the Hotspot on my iphone back on
    After that, when I tried to connect, it worked.  Hope this works for someone else.

  • Help! I updated Firefox to version 20.0 on my Imac and now Personnas is not working. What is wrong? What can I do to fix it?

    With the new version 20.0 Personnas is not working, how can I get Personnas to work?

    Whether particular persona or all the persona themes.
    Remove and reinstall the persona
    In order to switch to another persona that you had previously installed, do the following:
    #Go to ''Tools'' and click ''Add-ons'' (or click the Firefox button at the top left and click ''Add-ons'').
    #Switch to the ''Appearance'' tab. You should find your previously used personas in the list.
    #Find the one you want to use and click the ''Enable'' button.
    To uninstall the other ones you can click the ''Remove'' button on them and they'll be uninstalled instantly.

  • Personal Communicator not working correctly through VPN

    Hello Community,
    I can use some help please :-)
    This client uses Personal Communicator and works fine.
    The problem is via IPsec VPN client, they can log in, can make calls, but everybody (all contacts) show offline.
    I've been told that they have look at this problem for several weeks now but nobody knows what is going on.... I'm trying right now and having the same problem.
    When the remote IPsec client connects it gets the intenal DNS server and everything else works fine (IP communicator and all other applications).
    When inside the LAN, all contacts appear online using the Personal Communicator and works perfectly.
    I'm sure it's something simple but I have not been able to figue it out.
    Appreciate the assistance!
    Federico.

    Are you using CUPC 7 or 8? What is the VPN concentrator; an ASA?
    If 7, all of this is SIP traffic. Use a Wireshark to see what you get. You should see a SUBSCRIBE message for each contact followed by a 200 OK reply and NOTIFY when the person's status changes. Perhaps compare this against a capture from a LAN-attached client to see what's different.
    Do you see the ASA's IP addresses anywhere in the layer-seven SIP headers? I sometimes run across SIP inspection occurring on the ASA which is mucking around with the headers by doing things such as replacing the internal CUPS address with the ASA's egress interface address.

  • Login not working after configuration update

    I have a Pavilion g6-2235us running Windows 8 Metro. Yesterday afternoon my screen said "System Configuration/Updates in progress ... do not power off" This morning when I turned on my laptop ... it went to the metro login screen name and when I entered my password ...it said Welcome then went back to the login screen. Tried this a few times with the same results.
    Also, my Admin user name was gone and when I booted to "Recovery" there were no restore points.
    Any ideas as to what happened? If I do a backup to my external HD then reset to defaults .... can I recover my backup files once I'm logged backin?
    Thank for your help!
    Joe 

    There are some ways you can recover your password and there are some 3’rd party S/W’s that may work. One way to do it is to follow the link below even though the steps are for Windows 7 it should work in 8 too. 
    http://www.howtogeek.com/96630/how-to-reset-your-forgotten-windows-password-the-easy-way/
    And you can also try to do it using a 3’rd party S/W at your own risk it may or may not work but it’s worth a try if your data is really important. This video has all the info abt it.
    http://www.youtube.com/watch?v=40zDUCoysr0
    Hope this helps.
    ***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
    ****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
    -VJ
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • Personal hotspot not working in windows after hiberation

    At times after I recover my PC from hiberation, personal hotspot for my PC to surf web thru my iphone will no longer function. But charging and sync with iTunes will still be functioning. The only way to get personal hotspot to work again is to reboot my PC. This is really frustrating as Windows takes a long time to reboot.
    Thus, may I know what is or are the service(s) required by the personal hotspot to work? I can simply restart the service instead of rebooting windows instead.
    Thanks,
    Boon Hong.

    same case for my iphone 4 GSM (Hong Kong), my personal hotspot works at ios 7.0.4 but fails at 7.1 as APN cannot be set as described above. Hope Apple Support can help. My Carrier is PCCW-HKT (Hong Kong), which is not a registered carrier

  • Iphone4 ios 7.1 personal hotspot not working

    How to do my iphone4 ios 7.1 personal hotspot not active

    I have a similar problem with the hotspot on my iPhone 4 after updating to iOS7.1 and the trouble shooting doesnt help.
    Initially after updating my iphone 4 to iOS7.1 I could turn on the "personal hotspot" and it appeared to work but if a computer joined the network it could not connect to the internet.
    yesterday however I removed and reinserted the sim card (to check the balance on another sim card) and now the personal hotspot does not work at all.
    When I try to enter the APN details for my cellular provider it disappears when I exit the "Cellular Data Network" page and the "Personal Hotspot" tab shows busy for a while then becomes "Set Up Personal Hotspot" which if pressed tells me to contact the carrier.
    Is something wrong with the new iOS or is this a carrier problem - I never had a problem before installing iOS7 and the carrier information works perfectly on my friends iphone 4s on iOS7 - or is this something I need to take up with the carrier.  There doesnt seem to be anything wrong with the APN address on other devices (or before the update) and there is no problem with the internet connection on the phone.
    thanks for your help
    Phil

  • Personal Data not working for an employee in ESS

    Hai All,
    I have configured Personal Data in ESS. But, for a particular employee Personal Data is giving the below mentioned error when he edits the data. The error happens when he edits and clicks on Review or when he clicks on the dropdown for Nationality(Only for this field, the error occurs) and selects a value from that dropdown.
    As I searched in the forum, I found that we have to search ST22 for that user. In ST22, it is throwing 4 errors:
    1. UNCAUGHT_EXCEPTION CX_HRPA_INVALID_INFOTYPE_DB. The exception 'CX_HRPA_INVALID_INFOTYPE_DB' was raised, but it was not caught anywhere along the call hierarchy.    Termination occurred in the ABAP program "CL_HRPA_TIMECONSTRAINT========CP" - in "COMPUTE_INSERT". The main program was "SAPMSSY1 ".                                                        
    2. SYSTEM_CANCELED. The current program "CL_HRPA_TIMECONSTRAINT========CP" has been terminated by another mode.
    3. OBJECTS_OBJREF_NOT_ASSIGNED_NO CX_SY_REF_IS_INITIAL. Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in  "HRXSS_PER_CLEANUP".     
    The main program was "SAPMSSY1 ".
    4. SYSTEM_CANCELED. The current program "SAPLHRXSS_PER_MAC" has been terminated by another mode.
    My questions are:
    a Why it is not working for a particular employee?
    b Why it is working for other employees?
    c Did I miss out some configurations?
    Please help me out.
    Regards,
    Jubish

    Hai,
    Thankyou for the reply. But the user has entry in the infotype. Likewise, it is possible to change data from PA30 transaction also. The problem occurs only when I try to change data through ESS.
    Regards,
    Jubish

  • Auto-Login Not Working!

    So, I've figured out that the auto-login doesn't work if I have a password with numbers or symbols. It works just fine if my password has only letters. What gives?

    Nevermind. It just doesn't work. It's worked a couple times when I've tried a couple passwords without numbers or symbols, but now it's not working at all. When I restart, it makes me type in a user name and my password. Very frustrating.

  • My Digital personal is not working with 12, will there be a fix?

    I just upgraded to 12 and it is not completable with DigitalPersona Personal. Will there be a fix or can i go back to an old version? I just went back as far as 7 but still not working.

    It appears that DigitalPersona Personal has been discontinued:
    [http://www.digitalpersona.com/help/personal/ http://www.digitalpersona.com/help/personal/]
    "As of April 26th, 2010, DigitalPersona Personal is no longer available for sale through the DigitalPersona web site. "
    Running old versions of Firefox is not recommended as they are highly vulnerable to security holes. You should always run Firefox 12 or later. I would try to either contact your OEM if they shipped DigitalPersona with your computer, or try to find a replacement. It is likely that with the ending of sales, the company stopped releasing updates.

  • Launch button in personas is not working and i get attached error

    Dear Experts ,
    i have just configured my sap screen personas successfully and i can launch it from recommended path : /sap/bc/bsp/persos/mainapp/
    i can copy a flavor and work with it fine but my issue is that the launch button is not working and it gives the attached error image
    i followed the configuration guide step b step
    can you help me solving this issue as i don't know what i'm missing ..
    regards ,
    Yasser Afify

    Three people reporting a problem hardly qualifies as "quite a bunch". Actually, it is rather common that such issues turn out to be caused by a configuration or installation error.
    If you double-checked and are 100% certain that ALL the notes are properly implemented and everything is configured correctly according to the configuration guide, then open an OSS incident so the support team can take a look at your system. There is no "easier approach".

  • User login not working properly iMac 27 3.4 lion

    My user account will not work.  Every time I login with my name it shows me logged in a "Postgresql" and I have no access to my files.  Sometimes I'll leave it overnight and when I come back to it its correct and everything's in place.  Whats going on?

    I'd recommend first restarting in Safe Mode, this will reset some caches. It's possible one became corrupt somehow. If that doesn't work then use Changing or resetting an account password to reset it.

  • [solved] Start X at Login not working for me

    I'm stripping down my system and decided to get rid of my login manager (slim) and just make the system boot straight into the GUI on boot-up. I followed directions found at https://wiki.archlinux.org/index.php/St … sh_profile , but it's not working on this system. I just get dumped at a command prompt login when I reboot the system and, after having logged in, no X gets started. The system just sits there awaiting input at the prompt. If I enter startx, the GUI starts. But it's not starting at login as I'd like. Actually, it'd be even better if the system automatically logged me in and started X--like we used to do using inittab, once, etc. But that method's obviated now because of systemd, no? My WM is jwm, by the way. Tips on resolving this issue will be appreciated.
    James
    Last edited by jamtat (2013-01-25 21:59:42)

    You can still set up automatic login ("like we used to do using inittab, once, etc"): https://wiki.archlinux.org/index.php/Au … al_console
    As for your original question, I assume you are using bash, and you have added the correct information to your ~/.bash_profile? ("but it's not working on this system" is a little vague). This works for me.
    [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec startx
    Last edited by 2ManyDogs (2013-01-25 20:31:30)

  • Simultaneous Logins; Not Working; Intel & PPC

    So, one of my schools is a mixed 10.4 environment with PPC and Intel iMacs. Everything, including the G4 server is sitting at 10.4.7.
    I do not have mobile accounts and I don't have fast user switching turned on. And of course, "Simultaneous Logins" is turned off for every account.
    My APF clients can go to a PPC machine and login once and then go to an Intel machine and login. They get a slightly different Dock & Safari doesn't play real nice but they're able to login. The same can be said for an AFP client logging into an Intel first and then going to a PPC machine.
    Now, they cannot log in on two PPCs or two Intels at any time and so in that respect, the disabling of simultaneous logins is working. However, I've got a lot of people who will be lazy about logging out as they migrate from computer to computer and it's best if this "feature" actually worked cross-processor...
    Any suggestions? Anyone? ;0)

    Figured it out, I just had to restart the server for the changes to take effect.

Maybe you are looking for