Personnel no. in confirmation screen

Hi Everybody,
There is a field "Personnel no." in confirmation screens.
How to create ne Personnel no.?
Is it integrated with HR module or just can we mention the Personnel no. while confirming the operation?
Regards
Ramakanth

Dear Ramakanth,
You cannot directly enter the Personnel number. If you do so system will throw error. Personnel number is intergration with HR.Though HR is not implemented you can create personnel number. Go to tcode PA40 enter the Personnel number within the number range , start date then select Hiring Payroll and click on execute. Now enter the employee name details and save.Once this master data is available you can use this personnel number during confirmation.
Ramagiri
Edited by: Ramagiri Srinivas Rao on Nov 17, 2009 4:27 PM

Similar Messages

Cheque for Payment skipping Confirmation Screen

Hi Experts,
When I print cheques (created by payment wizard), it prints and gives the next cheque number which is fine, however I don't get the Confirmation Screen and soon after I get the error message 'No matching records found 'Cheques for payment' (OCHO) (ODBC -2028)
I had checked forums link Problem in Check Number Configuration and sap note 1059752 which does nto resolve the issue.
Any help will be appreciated. The client is on 8.8 PL16
regards
Johnson

Hi Manish,
Yes, I am able to open the check for payment window manually and in the option credited GL Account , i found account is listed.
And also i done all setting in house bank setup as per SAP note 1059752.
Banking -
> check number confirmation
check number confirmation - Selection criteria -
> Window open
After data is put and enter
Error message is display "No matching records found 'Cheques for payment' (OCHO) (ODBC -2028) [ Message 131-183 ] ..
Till not resolve .
Regards
Vinod G

Tax and amount total should show in the line item of confirmation screen

Hi All,
I need to add the Tax and amount total fields in the line item of confirmation screen for service cart.
Could someone please tell me how and where should I add and write the neccessary logic for that.
We are on version SRM 3.0.
Thanks,
Kumar

Hi,
Please check the foll note for addition of custom fields:
458591 - User-defined fields: Preparation and use
672960 - User-defined fields 2
To change the field content you need to implement the badi BBP_DOC_CHANGE_BADI .
Here is the sample code for BBP_DOC_CHANGE_BADI Implementation
loop at et_item into ls_item.
move ls_item-mfrpn to ls_item-zz_your_new_field.
modify et_item from ls_item transporting zz_your_new_field.
endloop.
BR,
Disha.
Pls reward points for useful answers.

Disable a field at Item level for SC confirmation Screen

Dear All ,
PLEase help me with a step by step instruction on how to disable field at Item level of confirmation screen of SC .
I tried in Webdynpro component : Web Dynpro Component:/SAPSRM/WDC_DODC_CONF_IBD in se80 and below is what I get ;
When I click on Display it asks me for an access key which I dont have ..
When I click on the enhancement option it asked me to create an implemenation which I did as seen in yellow below and still the enabled field is not getting editable so tha I can uncheck and make the field dissapper .
Please can some one really help me in understanding what exactly I am doing wrong ?
Also Please let me know if the SPRO path related in this to be able to do in any which way ... I tried expanding
Configure field control .. and it doesnt expand so dont know which other option to use ..
Thanks for your help in advance .
Kindly let me know !!
Regards
Vinita

HI Laurent .
1. Thanks for your input . I wasnt able to open the SPRO path coz I was using SAP 720 and when I installed 730 I was able to use it .
2. I am still not able to udnerstand how to configure it through Meta data .. What does Final_Entry mean .. I want to disable the field Last del indicator and its flag box and the label as well ..
3. I tried through component configuration and it worked ..as below :
I went to the webdynpro component and started the component configiurator :
Here I made both the field and Label insisible and was able to do this .
Please can some one help ,me know how to configire this through Meta data concept as well .. I wanted to try that method as well for my understanding ..
Would appreciate your help and would be closing this post soon ..

Enable 'Go to' link on confirmation screen

Hi all,
I am trying to do the configuration for 'go to Address overview' and W4 Overview link in the confirmation screen.
I can see the link in portal but on click its not doing anything.
In the home page framework,define links in confirmation screen I have check marks on 'show restart link' - Go to Addtress Overview and 'service key restart'- W4 Overview.
What other configurations do I need to have for these two links to be functioning?
I was following this blog:
/people/antonyraja.t/blog/2007/12/16/confirmation-screen-links-in-self-service-applications
What configurations need I have in 'Define Resources'?
Thanks
Kukku

Hi,
The blog is about a development, so in order to add a link to Address Overview just follow point 1; 'Define links on the confirmation page'.
In that IMG activity, under Confirmation Screen Links title, you have four pre-defined links (included the Restart Link to go to Address Overview).
If that not cover your requirements, you can also put a custom service under Service Links title.
Regards

Order Confirmation screen setting?

Dear SAPIENTS,
Where is the setting for order confirmation screen setting at the level of each user?
Regards,
Kaushal Rai

If you are talking about the transaction IW42 and how to set each user's settings you would use menu path Extras -> Settings, choose the appropriate Confirmation profile, and Save. Each user will have to perform this action in IW42 to set the default screen layout. The confirmation profiles are set up under Set Screen Templates for Completion Confirmation in the IMG path Plant Maintenance and Customer Service -> Maintenance and Service Processing -> Completion Confirmations -> Set Screen Templates for Completion Confirmation.
Not sure if this answers the specific question, but I hope it helps.
Regards

How to eliminate confirm screen popup

when i click back arrow, i get a confirm screen. (to resend)
how to eliminate confirm screen popup every time?

You get an alert about resending POST data if you go back to a page that was previously requested from the server by submitting form data via a POST form.
The only way that Firefox can make sure to get the same page is by resending that POST form.
Firefox doesn't know what that form data means, so Firefox asks for confirmation before resending that form data as such an action can cause you to repeat an action and buy another item or post a message another time.
The only way to prevent that pop-up is not to use the Back button, but to open links from a page that was requested from a server by sending a POST form in a new tab (window) with a middle-click or a Ctrl + left-click.
Then you can close that tab or window to go back.

CO11N - Confirmation screen - production order

Dear Experts,
How to set mandataroy field for (execution start, finish, created by, created on, time) CO11N - Confirmation screen, which config settings to change.
pls advise
Thanks,
Sankaran

Hi ,
Go to transaction CO86 - define field selection for confirmation and set the required fields as Required entry fields.
Hope the info is useful.
thanks and regards
Murugesan

Need 2x click or confirmation screen for calling / texting

This is a call out to Apple to implement double click for calling / texting - or at least offer a confirmation screen when dialing from screens like 'favorites' or 'recents'
I can not tell you how many times I have initiated calls erroneously when attempting to scroll (or I've called the wrong number because I didn't hit the correct contact on first touch), and how many times I have inadvertently hit send on text messages before I was ready, simply because I was trying to type 'o', 'u' or 'p', or my finger just touched the screen in the wrong place.
The phone is all screen and it's really difficult not to touch it. The issue is that just touching the screen often initiates an unintended call or other action, especially if trying to operate the phone with one hand or while in motion.
Please chime in here to let Apple know that this is an issue that needs to be addressed. I know many of you are having the same usability issues. Let Apple know by responding to this post with your stories of frustration.
Thanks,

If apple would add that feature there would be allot more users requesting it taken off than the users that would actualy want it so I am sure that they would not want to add features just for a select few customers
There are to many taps allready up the point when you place a call, why add more
There is an easy fix for your problem: be carefull when you tap on your screen

Calibration order-time confirmation screen not appearing

I am setting up a calibration process.
While doing the result recording , time confirmation screen doesnt appear.
Why is it so?

hi
In task list assigned the work center along with control key QM04, so that when u provide the reault then system pop-up the confirmation screen.
provide confirmation and apply UD and close it.
Regards

DBCA confirmation screen hangs

Hi Experts,
I am trying to create database from DBCA and when I get the confirmation screen it gets hang. Please help me with the issue.
Using 11gr2 on RHEL6 64bit.

Below is the message I am getting while running DBCA. on location /u01/app/oracle/cfgtoollogs/dbca.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=orcl)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 03-AUG-2012 11:51:38
Uptime 0 days 1 hr. 31 min. 18 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=orcl)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=localhost)(PORT=2484)))
The listener supports no services
The command completed successfully
[TaskScheduler timer] [ 2012-08-03 13:22:56.497 IST ] [NetworkUtils.checkListenerStatus:449] returning listenernull
[TaskScheduler timer] [ 2012-08-03 13:22:56.499 IST ] [OsUtilsUnix.validatePackage:969] package found: libaio
[TaskScheduler timer] [ 2012-08-03 13:22:56.500 IST ] [Verifier.validateTemplate:2007] StorageType == 0
[TaskScheduler timer] [ 2012-08-03 13:22:56.502 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3448] canonicalPath=/u01/app/oracle/
[TaskScheduler timer] [ 2012-08-03 13:22:56.502 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3448] canonicalPath=/u01/app/oracle/
[TaskScheduler timer] [ 2012-08-03 13:22:56.503 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3448] canonicalPath=/u01/app/oracle/
[TaskScheduler timer] [ 2012-08-03 13:22:56.505 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3448] canonicalPath=/u01/app/oracle/
[TaskScheduler timer] [ 2012-08-03 13:22:56.506 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3448] canonicalPath=/u01/app/oracle/
[TaskScheduler timer] [ 2012-08-03 13:22:56.576 IST ] [Verifier.calculateRedoLogGroupFileSizes:3579] canonicalPath=/u01/app/oracle/
[TaskScheduler timer] [ 2012-08-03 13:22:56.578 IST ] [Verifier.calculateRedoLogGroupFileSizes:3579] canonicalPath=/u01/app/oracle/
[TaskScheduler timer] [ 2012-08-03 13:22:56.579 IST ] [Verifier.calculateRedoLogGroupFileSizes:3579] canonicalPath=/u01/app/oracle/
[TaskScheduler timer] [ 2012-08-03 13:22:56.579 IST ] [Verifier.getControlfFileSizes:3498] No. of Control files:=2
[Thread-33] [ 2012-08-03 13:22:56.611 IST ] [UIHost.getHtmlSummary:1081] UIHost:getHtmlSummary: running createTemplateDocument NOT for SHOW_TEMPLATE condition
[Thread-33] [ 2012-08-03 13:22:56.618 IST ] [UIHost.getHtmlSummary:1087] UIHost:getHtmlSummary: after running createTemplateDocument NOT for SHOW_TEMPLATE condition
[Thread-33] [ 2012-08-03 13:22:56.633 IST ] [XSLConst.generateHeaderXSL:214] NLS:Template Name:= null
[Thread-33] [ 2012-08-03 13:22:56.633 IST ] [XSLConst.generateHeaderXSL:219] Template Description:= Use this database template to create a pre-configured database optimized for general purpose or transaction processing usage.
[Thread-33] [ 2012-08-03 13:22:57.079 IST ] [UIHost.getHtmlSummary:1117] UIHost->getHtmlSummary: start printing of transformed document
[AWT-EventQueue-0] [ 2012-08-03 13:24:37.886 IST ] [Host.cleanup:3407] Dbca exit status is: -1
[AWT-EventQueue-0] [ 2012-08-03 13:24:37.887 IST ] [Host.cleanup:3410] check point context null
[AWT-EventQueue-0] [ 2012-08-03 13:24:37.899 IST ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[AWT-EventQueue-0] [ 2012-08-03 13:24:37.900 IST ] [InventoryUtil.getHomeName:111] homeName = OraDb11g_home1

Alternative unit at Confirmation screen

Dear All,
For a material BUM is TON but i have maintained Unit PC as production unit in Work scheduling view. but when i go to confirm the order of that material automaticallt unit TON appears instead of PC. why PC is not appearing there.

Hi
If you already maintained alternate units in the additional data of material master, it is possible to change the units in any screen and in the confirmation screen input pc manually and enter and the corresponding quantity will be displayed. Hope this will help you. By default it will take production units
Thx krishna

Personnel no in maintenance order confirmation screen.

Hi,all,
If I do not assign any personnel no to maintennace work center,is it possible to get the personnel no in IW41/IW42/IW44 screen in "personnel no" field.if possible, please explain how it can be done?thanks in advance.
rgds
rajib

Hi,
Could you tell me where you will assign personnel no in work center?
As per I know this personnel number will be assigned by HR only.
The Confirmations from, PM interface supports the transfer of order confirmations from Plant Maintenance (PM), Customer Service (CS), and Project System (PS) to the Personnel Time Management component in the Human Resources (HR) System. Performance-based payments are effected to employees on the basis of such order confirmations.
The Confirmations from PM, CS, and PS interface is used for confirmations entered manually in the LO System, and for confirmations collected from a plant data collection system (PDC, communication channels 2, 3, 4, 5). You can enter the confirmations for PM, CS, PS, and PI as time tickets (hours worked). You can also enter confirmations for PP and PI as time events (start of working time, end of working time).
Time ticket confirmations from PP and PI are posted as time tickets to the HR Incentive Wages component. Time ticket confirmations from PS, PM, and CS are posted as attendances to the HR Personnel Time Management component. Processing time tickets in HR has no effect on LO.
Procedure in HR
1.Call up the account list for the employee in question.
2.Choose account list  Assigned personnel No. u2013>Create assignment.
3.Specify a time period, in which a personnel number is assigned to the chosen account.
If a new validity period overlaps an existing period with the same personnel number, both periods join to become one entry.
4.Save your entries.
Regards
Srinivas

In process order confirmation screen there should be 2 rows for down time.

hi,
We are using cor6n for process order confirmation, where we can put down time with confirmation text at once,
if there is two different down time, then user has to again run cor6n with 0 yield for put another down time, which gets more time.
for this reason i have customised single screen entry profile by mentioning two down time & confirmation rows in screen.
when i going for confirmation i put two different down time after goods movemnt order get confirmed & settled.
but when i see report in COOISPI there is only one down time against order.
system only considers last down time.
hows the system consider down time?
thanks in advance.
regards
sanjay.

Hi,
The report COOISPI considers only one line of the down time, it is not considering the 2nd row of the down time. You need to change the COOISPI program to read the 2 lines of the down time. You need to change the standard program to read the 2 down time lines.
Thanks & Regards,
V. Suresh

2LIS_04_P_ARBPL; incorrect Delta; missing personnel number in confirmation

Hi
I'm facing following problem. I made a new setup of LO-extraction 2LIS_04_P_ARBPL just for one order. The order has one operation "10" with one quantitiy confirmation from person "123".
INIT-Load: I get the data correct .
Delta-Load: I get the quantity confirmation correct but without personnel number.
I made a new quantity confirmation for user 123 and operation 10. My delta load books the quantity correct but without personnel number. The field PERNR is initial.
I didnt' found any reason. please help.
regards
Pascal

Mapping errors. Solved on own.

Personnel no. in confirmation screen

Similar Messages

Maybe you are looking for