Personnel number 51099402 locked by user-CAT4
HI,
I am getting the message in cat4 is
Personnel number 51099402 locked by user
Message no. LR093
I am unable to solve the problem.
Please help me.
Rgds,
RSV
Dear Carlos & Pete,
Thanks for your help.
I contacted HR & Basis team.
Thanks once again.
RSV
Similar Messages
-
Locked Personnel number in ESS
We have an issue where occassional employees accessing CATS receive the Personnel Number is locked error, but there is no locked record entry in SM12 or program HFIUCPL0.
For a couple of users in-particular this has been ongoing for over a month!
I am now looking at switching off Work Protect mode, but need to restrict it to the individual and not across the company; we have the Personalization link turned off in ESS itself, so the user can't update it themselves. Is there a way to maintain it on their behalf through ECC (I have been through SU01 and can't find a personalization setting or parameter that refers to it, but may be missing something)
Any help/advice would be greatly appreciated.
Simon
Edited by: Simon Worthington on Nov 12, 2010 4:54 PMMake sure you review the attached note 596698.
Please apply the following steps:
1. Open the Record working time iView for editing in the Content
Administrator.
2. Set the iView property "Application Parameters" to
"sap-wd-enforcesessionmanagement=ok"
3. click on Save. -
BAPI_GOODSMVT_CREATE + Serial Number locked by User
I am posting a GR for a PO and assigning serial numbers in the goodsmvt_serialnumber table. This is working fine for small volumes ie 2000 , but when we reciept larger volumes e.g. 10,000 we are getting the error massage "Serial number is locked by User "
Has anyone got any ideas ?? This program is a copy from one from our Legacy system, so I know that the code is ok, we are upgrading to ECC5.0 from 4.6C.
Cheers
SharifHello,
I need to work with this BAPI. Actually I am in a "Pre Paid card Project". I 'll have to good receipt from purchase order about 2 million of cards. I am worried for performance problems.
Do you have any problem in goods receipt for thsi quantity?
Thanks in advance -
How To Update Personnel Number in BP Transaction
Hi all,
I need to update personnel number for BP role Employee in BP transaction. But I am not able to do it.
<b>It's in Identification Tab
Employee Data Window
Personnel Number : Need to populate
User Id : Need to populate</b>
Kindly help me with relevant example.
Thanks,
PradeepHi Pradeep
The personnal number will be populated from ECC to CRM.
The same will be created in HR module and then populated thru ALE to CRM.
Provide me with your email id, i will mail you the document to help you for the same
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b>
Message was edited by:
Rekha Dadwal -
Personnel number 00000000 could not be locked; lock 00000000 failed twice
Hi!
I'm trying to create new person to SAP HCM by using SAP ERP HCM Process and Forms functionality. Process is defined to be fast entry process: NO_WORKFLOW value in workflow template.
I have defined process' attributes CENTRAL_PERSON as blank and PERNR attribute to get default value from business process logic's (DEF) from SAP_PA (infotype 1: 0001-PERNR).
When process is trying to check values it gives me error "Perosnal number 00000000 could not be locked; lock 00000000 failed twice". Error's message class is HRASR00_FBD and message number is 011.
I debugged the ISR process and the actual error is raised in CL_HRPA_MASTERDATA_ENQ_DEQ class' method ENQUE_BY_PERNR.
ABAP call stack is this:
35 CL_HRASR00_PAITF_MAPPER=======CP CL_HRASR00_PAITF_MAPPER=======CM00F 14 METHOD IF_HRASR00_MAPPER~LOCK_OBJECT
34 CL_HRASR00_DISPATCHER=========CP CL_HRASR00_DISPATCHER=========CM00X 22 METHOD PROCESS_LOCKING
33 CL_HRASR00_DISPATCHER=========CP CL_HRASR00_DISPATCHER=========CM017 24 METHOD FSCN_DO_OPERATION
32 CL_HRASR00_DISPATCHER=========CP CL_HRASR00_DISPATCHER=========CM00R 803 METHOD PROCESS_DATA_CONTAINER
31 CL_HRASR00_DISPATCHER=========CP CL_HRASR00_DISPATCHER=========CM00G 178 METHOD DO_OPERATION
30 CL_HRASR00_DISPATCHER=========CP CL_HRASR00_DISPATCHER=========CM00I 24 METHOD IF_HRASR00_DISPATCHER~CHECK
29 CL_IM_HRASR00ISR==============CP CL_IM_HRASR00ISR==============CM004 496 METHOD IF_EX_QISR1~SCENARIO_PROCESS_USER_COMMAND
28 CL_EX_QISR1===================CP CL_EX_QISR1===================CM004 16 METHOD IF_EX_QISR1~SCENARIO_PROCESS_USER_COMMAND
27 SAPLQISR9 QISR_CL_ISR_WEB_UI_PROXY 2025 METHOD PROCESS_USER_COMMAND
26 SAPLQISR9 LQISR9U07 499 FUNCTION ISR_PROCESS_EVENT_INTERNAL
25 SAPLMPO_46CFF_ISR_SERVICE LMPO_46CFF_ISR_SERVICEU06 184 FUNCTION ISR_PROCESS_EVENT
24 SAPLMPO_46CFF_ISR_SERVICE LMPO_46CFF_ISR_SERVICEU12 157 FUNCTION ISR_PROCESS_EVENT_WD
23 CL_QISR_UI_PROCESS_EVENT_MODELCP CL_QISR_UI_PROCESS_EVENT_MODELCM003 6 METHOD IF_QISR_UI_DATA_MODEL~EXECUTE
22 /1BCWDY/9KIHZOTJM1O6VWFQPCJ4==CP /1BCWDY/B_9KIHZOTJM1O6VWIWGPVP 2032 METHOD CALL_RFC_ISR_PROCESS_EVENT
21 /1BCWDY/9KIHZOTJM1O6VWFQPCJ4==CP /1BCWDY/B_9KIHZOTJM1O6VWIWGPVP 1487 METHOD CALL_ISR_PROCESS_EVENT
20 /1BCWDY/9KIHZOTJM1O6VWFQPCJ4==CP /1BCWDY/B_9KIHZOTJM1O6VWIWGPVP 108 METHOD IWCI_QISR_UI~CALL_ISR_PROCESS_EVENT
19 /1BCWDY/9KIHZOTJM1MJA1NASP4F==CP /1BCWDY/B_9KIHZOTJM1MJA1SLVIT2 6357 METHOD _OVR_4T5KF0KFFIXZTMN23D48RVJME
18 /1BCWDY/9KIHZOTJM1MJA1NASP4F==CP /1BCWDY/B_9KIHZOTJM1MJA1SLVIT2 127 METHOD IF_PROCESS_START~NAVIGATE_TO_REVIEW_FORM
17 /1BCWDY/9KIHZOTJM1MJA1NASP4F==CP /1BCWDY/B_9KIHZOTJM1MJA1SLVIT2 5656 METHOD ONACTIONCHECK_AND_SEND
16 /1BCWDY/9KIHZOTJM1MJA1NASP4F==CP /1BCWDY/B_9KIHZOTJM1MJA1SLVIT2 976 METHOD IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER
15 CL_WDR_DELEGATING_VIEW========CP CL_WDR_DELEGATING_VIEW========CM005 6 METHOD INVOKE_EVENTHANDLER
14 CL_WDR_ACTION=================CP CL_WDR_ACTION=================CM00A 38 METHOD IF_WDR_ACTION~FIRE
13 CL_WDR_WINDOW_PHASE_MODEL=====CP CL_WDR_WINDOW_PHASE_MODEL=====CM00U 95 METHOD DO_HANDLE_ACTION_EVENTS
12 CL_WDR_WINDOW_PHASE_MODEL=====CP CL_WDR_WINDOW_PHASE_MODEL=====CM002 94 METHOD PROCESS_REQUEST
11 CL_WDR_WINDOW=================CP CL_WDR_WINDOW=================CM00V 12 METHOD PROCESS_REQUEST
10 CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00I 77 METHOD EXECUTE
9 CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00U 6 METHOD IF_WDR_RUNTIME~EXECUTE
8 CL_WDR_CLIENT_ABSTRACT_HTTP===CP CL_WDR_CLIENT_ABSTRACT_HTTP===CM01A 114 METHOD HANDLE_REQUEST
7 CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00J 85 METHOD IF_HTTP_EXTENSION~HANDLE_REQUEST
6 CL_HTTP_SERVER================CP CL_HTTP_SERVER================CM00D 594 METHOD EXECUTE_REQUEST
5 SAPLHTTP_RUNTIME LHTTP_RUNTIMEU02 1216 FUNCTION HTTP_DISPATCH_REQUEST
4 SAPMHTTP SAPMHTTP 13 MODULE (PBO) %_HTTP_START
3 2 PBO MODULE %_HTTP_START
2 SAPMHTTP 2 PBO SCREEN 10
1 0 TRANSACTION ()
Our SAP levels are these:
SAP_BASIS 731 0004 SAPKB73104
SAP_APPL 606 0004 SAPKH60604
SAP_HR 604 0049 SAPKE60449
SAP_HRRXX 604 0049 SAPK-60449INSAPHRRXX
So, I'm out of ideas. How to prevent locking for person number 00000000 when creating new employee by using SAP HCM Processes & Forms?
Best regards,
-TimoHi!
I asked this from SAP. I got following answer:
Error "Personnel number &1 could not be locked; lock & failed twice - HRASR00_FBD 011" is sometimes raised due to default value of field PERSG, PERSK, and WERKS. Can you please make sure that these fields have a manual default value assigned on your process to be sure that pernr can be generated?
You can also try to check whether standard hire processes like HIRE_01 or HIRE_10 are working correctly or same lock error is raised.
I valuated also PERSG, PERSK and WERKS and after that the process was valuated with new personnel number taken from number range.
So result was that new number was taken from number range immediatelly when my data entry form was shown (I use process without workflow = fast entry) --> If user uses to form without saving (= abort new employee creation), one number is taken from number range, but not used. I ended up with solution that system is not getting the number automatically in start of the process (= I don't valute those PERSG, PESK and WERKS, they are valuated in form by user anyway). Instead I take manually new number form employee's number range (RP_PREL) before the data checks by using function module NUMBER_GET_NEXT.
Hopefully the solution by valuating PERSG, PERSK and WERKS works for you.
-Timo
Message was edited by: Timo Saviahde
I tried to edit my answers text to contain readable formatting --> no matter what I do, it shows my text without correct line brakes and other stuff... -
How to get personnel number of the user in the wd java code in Leave reques
Hi all,
we are using the standard Leave Request Applicatin ESS.
can any one please tell me how to get the personnel number of the user in the WD java code?
cause i have pass the pernr number to a bapi and get the details.
please help me its urgent.
thanks in advance.Hi Madhu,
Create a model for the particular bapi in wd java and acess it in your component. Then pernr parameter will be available in the context and u can pass value for the parameter (pernr) to the model and get the output.
If you hav any doubt, please let me know.
Regards,
Jithin -
Error in MSS requisition 'No personnel number is assigned to your user in SAP E-recruiting '
Hi ,
We are getting error in MSS requisition in E recruiting system that 'No personnel number is assigned to your user in SAP E-recruiting '
while clicking on next button in the requisition form.We have assigned all specified roles for the E-rec related things with authorisation for 'P' and all
other objects.Please comment on this if anybody faced the same issueHi, just want to add to this issue might be useful for somebody else.
We had the same issue, it turns out that the person who is raising the requisition has 2 Business partners in the system. We set one business partner to be "not released" and in addition to that we added the NA relation as this is missing with the CP
MfG. -
Serial Number is already Locked by User
Hi,
We have ISU Material where Serialization Profile is activated system. We create Serial Number Automatically when we do the MIGO. The System is giving me a error that " Serial Number is already locked by User".
If I enter quantity say for Example 9000 in the quantity field, system is allowing 7000 and 2000 it is throwing me the above error.
I have also unchecked Lock for Internal Assignment of Serial Numbers in SPRO settings of Plant Maintenance Module, which results in increase the acceptance number from 3000 to 7000. But beyond that it is an issue.
Please help me
Thanks
SubcIt could be possible that the user exited the system abruptly.. try using SM12 and unlock the table for that user name
-
Hi
When I am doing the MIGO for PO which is having 30000 quantities and when I am assigning the Serial No then I am getting this error - 'Serial Number is already Locked by User' but actually this Serial No. is not being used by other person.
Please suggest something how to proceed.Hi Sean,
the below mentioned notes is how to unlock it.
Goto SE11 and select the Lock Object radio Button. Click on F4
you will see a popup asking to enter the Lock Object.
Now Click on the + symbol ( which will show you further select options)
Now enter the Base table. it is the Table which you have the Searial Number(Master data)
and Hit enter. It will show you all the Locks existing for that table.
Now Select the Lock which is locking the Serial Number.
Now goto your code. from the pattern button Call the FM as DEQUEUE_Lock_object
Hope This helps.
Thanks. -
Hi,
I am looking to get the 'Personnel Number (PERNR) ' using sy-uname. Is there any table which hold this information.
Thanks,
VindIt all depends how the data is maintained in your system
Ideally the user name is maintained against a personnel number in communications infotype 0105.
I dont think it is advisible to use USR21 as the field is not from PA and it is described as Person number and not Personnel Number.
maybe others can comment as well.
Cheers
Ajay -
Number Ranges-The data is locked by user ... and can be displayed only
I wanted ti define number ranges - Transaction CXEG in Consolidation, and somehow i blocked the data (message: The data is locked by user ... and can be displayed only). How i can unlock the data so i can define new number ranges for this year. Please help
Hi,
Make sure you don't have any open sessions. If not, then go to SM12, and delete the relevant locked entry.
Regards,
Eli -
Personnel number(s) could not be locked
Hi,
I have this kind of error when I try to edit some data.
Of course the pernr in SAP is not locked...
thanks for your help
Service is locked
The service you want to start is currently locked.
Please try again later.
personnel number(s) could not be locked
personnel number(s) could not be locked:com.sap.pcuigp.xssfpm.java.FPMRuntimeException: personnel number(s) could not be locked
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.xss.hr.cod.FcCodBusinessLogicComp.callRFCEnqueuePernr(FcCodBusinessLogicComp.java:346)
at com.sap.xss.hr.cod.FcCodBusinessLogicComp.lockEmployeeData(FcCodBusinessLogicComp.java:283)
at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicComp.lockEmployeeData(InternalFcCodBusinessLogicComp.java:382)
at com.sap.xss.hr.cod.FcCodBusinessLogicCompInterface.lockEmployeeData(FcCodBusinessLogicCompInterface.java:156)
at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface.lockEmployeeData(InternalFcCodBusinessLogicCompInterface.java:163)
at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface$External.lockEmployeeData(InternalFcCodBusinessLogicCompInterface.java:231)
at com.sap.xss.hr.cod.display.VcCodDisplayComp.onEvent(VcCodDisplayComp.java:224)
at com.sap.xss.hr.cod.display.wdp.InternalVcCodDisplayComp.onEvent(InternalVcCodDisplayComp.java:194)
at com.sap.xss.hr.cod.display.VcCodDisplayCompInterface.onEvent(VcCodDisplayCompInterface.java:115)
at com.sap.xss.hr.cod.display.wdp.InternalVcCodDisplayCompInterface.onEvent(InternalVcCodDisplayCompInterface.java:124)
at com.sap.xss.hr.cod.display.wdp.InternalVcCodDisplayCompInterface$External.onEvent(InternalVcCodDisplayCompInterface.java:200)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:533)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseEvent(FPMComponent.java:936)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseEvent(FPMComponent.java:1099)
at com.sap.xss.hr.cod.displaynavigation.VcCodDisplayNavigationComp.toEdit(VcCodDisplayNavigationComp.java:296)
at com.sap.xss.hr.cod.displaynavigation.wdp.InternalVcCodDisplayNavigationComp.toEdit(InternalVcCodDisplayNavigationComp.java:189)
at com.sap.xss.hr.cod.displaynavigation.DisplayNavigationView.onActionChange(DisplayNavigationView.java:163)
at com.sap.xss.hr.cod.displaynavigation.wdp.InternalDisplayNavigationView.wdInvokeEventHandler(InternalDisplayNavigationView.java:188)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:727)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:663)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:229)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:877)
at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:80)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1291)
at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:325)
at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:831)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:707)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:661)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:229)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:180)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)Hi Frined,
Pls do share if you had found the solution for this problem. Cause I am also getting this problem in Life and Work events. When I click on benefits enrollment i am getting this error. this started occuring for me after I upgraded to version Nw2004s SP08 to SP09.
Pls do help me with the solution,
thanks,
Ramesh -
How can user view Central Person ID by Personnel Number and Vice Versa?
Dear Experts,
We are not using Concurrent Employment, but since Talent Management requires to use the Central Person object, we have created the relative objects for the employees. What I want to know is, how can user view the Central Person ID by a personnel number and vice versa easily?
Thanks,
StevenNot User friedly
This logic is in Function Group HRTMC_PPOM, screens 0700 and 0710.
You can copy it to Z and change search.
In transaction OOFRAMEWORKCUST for scenario TMC_PPOM change Report in "Tab Page in Scenario for each Object Type" from HRTMC_PPOM to new Z*. -
Is It Possible To Create Different Personnel Number For One Employee
HI Experts,
My Client need to get Different Personnel number for one employee,i.e for Trainee one Personnel number need to generate and same person when moving from Trainee to Probation another new personnel number should generate and again when same person move from Probation to Permanent another new personnel number should generate.
1. How to generate 3 different Personnel number for One employee?
2. How these 3 Personnel number should get linked, if want to get report for this one employee?
Kindly help me.
Thanks,
Lavanya
Message was edited by: Sikindar AHi Lavanya,
Your requirement can be fulfilled but not recommended...
As you want to generate different position number at different stage of employment....
i.e Trainee to Probation to Permanent...
First go for Trainee Position Hiring .... and generate first Number Say 5000000
Then suppose employee complete training after 1 Yrs.. then again go PA 40 enter date as 01.01.2015 say... & execute... & give Ref. Personnel Number (5000000) & different position number... this time...
This will link up all the personnel date from previous hiring record... & as per your need you can modify it.... Finally one more number be generated....
Similarly,, you can do for Permanent employee...
Once training or Probation period gets completed you can lock/ separate that employee number
Report ...
You can get necessary details in IT0031...& with different Position numbers which you will using at different stage of hiring...
Hope this should sort your issue..
Regards,
Veeram -
How I can pass from an iView SAP BW 3x the personnel number to a report BI
Good Afternoon.
I need pass as parameter the personnel number of the user that entry in the portal to a report BI.
I did the following steps for created the iview in the portal:
[Steps for create the iview|http://www.freeimagehosting.net/uploads/cc5306da6f.jpg]
In the properties of the iview of have the following url:
BEx Web Application Query String = http://10.4.33.133:8000/SAP/BW/BEX?&VARID=&VAR_ID_2=ZVEMPLEADO++++++++++++++++++++0004&VAR_VALUE_LOW_EXT_2=00000058&INFOCUBE=ZPA_C01&QUERY=ZPA_C01_Q006
In this moment i have the value for the personnel number fixed with 00000058, But i want know What is name of the variable that i must use for not put a value fixed and this can work for any employee.
How can pass this parameter?
I test with <PERNR>
BEx Web Application Query String = http://10.4.33.133:8000/SAP/BW/BEX?&VARID=&VAR_ID_2=ZVEMPLEADO++++++++++++++++++++0004&VAR_VALUE_LOW_EXT_2=<PERNR>&INFOCUBE=ZPA_C01&QUERY=ZPA_C01_Q006
But this not work .
Thanks in advance for your help
Best RegardsGood Night.
Anyone can help me with this issue , please
Thank in advance for your help-
Regards
Maybe you are looking for
-
HT204003 why does passbook not work on my iphone 4 with ios6?
It has never changed off of the screen that tells me the features of passbook, even though i have multiple apps that are passbook compatible
-
PPRO is only playing solo channels - how do I get it back to playing both
I've been editing a project for about six weeks and had no problem importing audio and video. Everything had been synched up ok and PPRO was behaving normally. I've had two weeks off and have just imported more footage but the audio now doesn't play
-
hi everyone,is there any view or query to count the total no of rows thats exists in entire single database tables.
-
Mainstage Crash during live use after OS X 10.7.4 install.
I am a semi-pro musician and I have added Main-stage to my set-up, in line with my hardware synths, as I transition into the soft synth world in a live situation. Up until the latest OS X install, Main-stage has been stable, which is critical for liv
-
Macbook Pro running 10.8.1 with bootcamp for a win 7 install was working fine had to delete the scratch drive to let me partition it correctly so I could install windows I installed windows everythings working great user recreates scratch drive now I