Perspectives not visible in NWDS 7.1 ehp1

hi
I have downloaded and installed the CE 7.1 EHP1 from SDN. when i finished the installation of NWDS i am able to see only 3 perspectives in the NWDS. I have followed the pdf file with name "installation and configuration of SAP CE 7.1 EHp1 preview " available in SDN. in this , in section installing NWDS step 13, it says that the update manager starts automatically. But for me it did not start. I think that is the reason why i am not able to see all the perspectives. can any body have any suggestions?
thanks
sankar

hi sampath,
Now the problem is resolved, but i am facing a new problem. I am into " installing enterprise service repository" section of the PDF. when i try to deploy three archive files but the system is throwing the error saying " Could not retrieve deployment system configuration for CE1. Please check if the system is running. ". I have added the CE1 system to SAP AS java in properties as suggested in the pdf doc. I have started the CE1 system from SAP management console, but still the error pops up. did i miss something.
thanks
sankar

Similar Messages

  • Composite Application Services perspective not visible

    Hi ,
               i am working with Netweaver 7.1. I am not able to view Composite Application Services perspective in my NWDS. is there any licence issue or plug problem?
    Kavita

    Hi,
    I think you have not installed required features from updite site(Local download directory) propperly after installation of your IDE.
    In that case you have update your IDE  through Software installation update option of Help menu.
    The procedure will be mentioned in the start page of Software setup file(SAPNWCE71Trial_DevStudioSAPNWCE71Trial_DevStudio).
    [This |perspectives not visible in NWDS 7.1 ehp1;thread is useful for you.
    Thanks

  • Code developed in NWDS 7.1 CE7.1 not working in NWDS 7.1 EHP1

    Hi,
    The code developed using NWDS CE7.1  is working fine at runtime and then migrated to NWDS 7.1 EHP1 for a new requirement.The same code in NWDS 7.1 EHP1 is not working at runtime . The problem is with one of the columns in a table.This column is binded to a value attribute in NWDS CE7.1 whereas in NWDS 7.1 EHP1, this "value attribute" is now just an"attribute".
    The column is no longer displaying the right value at runtime when deploying the code from NWDS 7.1 EHP1.
    Please help.
    Regards,
    Reinuka.

    Hi Satish,
    Thanks for the reply.
    Yes, the attribute's dataype is not effective at runtime.I had created a custom date datatype for this attribute and assigned a format"dd-MMM-yy HH.mm.ss"  which is coming fine when the track has 7.10 sap dependencies but not when using a new track having same SCA file with 7.11 sap dependencies.I found it's not a problem with NWDS but when we with the version of the SAP dependencies added to the NWDI track.Kindly suggest.
    Regards,
    Reinuka Paul.

  • Sap J2EE Engine is not visible in NWDS

    Hi ,
    iam new to Sap iam Builing an Simple Application in Which SAP J2EE engine is not visible under
    Window ->Preferences
    can any one help me ASAP.

    MY Sap J2EE Engine is Install in Remote Host  and iam not getting the option Of SapJ2EE
    Engine in Window->Prefrences.
    iam building an Webdynpro Application In Netweaver.
    1) When i Click Deploy NewArchive and Run.
    2) Sap J2ee engine login Screen Come i logged in.
    3) But after deployment is finish.
    Iam getting an Error Saying that:
    ERROR:
    com.sap.ide.eclipse.deployer.api.APIException: ConnectionException,cause=[ERROR CODE DPL.DCAPI.1144] NamingException.Cannot get initial context.
    Reason: Exception during getInitialContext operation. Cannot establish connection to the remote server.
         at com.sap.ide.eclipse.deployer.dc.DCClientImpl.<init>(DCClientImpl.java:70)
         at com.sap.ide.eclipse.deployer.dc.DCClientFactoryImpl.createClient(DCClientFactoryImpl.java:142)
         at com.sap.ide.eclipse.deployer.DeployerPlugin.getClient(DeployerPlugin.java:201)
         at com.sap.ide.eclipse.sdm.threading.DeployThreadManager.deploy(DeployThreadManager.java:359)
         at com.sap.ide.eclipse.sdm.SDMManager.deployArchives(SDMManager.java:149)
         at com.sap.ide.webdynpro.archivebuilder.ActionDeployArchive$DeployJob.run(ActionDeployArchive.java:214)
         at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    can you please help me with is error.

  • ESS DCs not visible in NWDS imported from NWDI.

    Hi Rafi,
    one step is missing.
    Consider after point 4 the following:
    Go to the Development tab in the transport studio of CMS webui and import all the SCs you can see there.
    Now restart your NWDS, log on again from there to the NWDI in order to make your previously imported development configuration visible and this time you'll see the DCs available for all those SCs you have imported to dev.
    This is because if you don't import to the development buildspace, then NWDS cannot sync them as there is nowhere to sync from.
    ! Notice also that you'll be able to see the DCs in the perspective "Development Configuration" and there you see them in the inactive view (if it is about modifiable DCs, like ESS') and the DCs for all the dependent SCs will be displayed in the active view only. In the LocalDevelopment view you see only DCs for which you have created a Project (which are "created on" / "synced to" your local machine ). The same for the webdynpro perspective. So once the given DCs is visible in the Inactive View of the Development Configuration perspective, right click on it, "Create Project" and if this is a WD DC then it'll automatically bring you to the WD perspective, and again, since you have just created a project for it, it will display also in the WD perspective as well.
    Best Regards,
    Ervin

    Hello Rafi,
    this usually means that your CMS content is out of sync with the SLD content.
    In other words: if you check the SCs in the table on the bottom (on Track Data of Landscape Config) and then you compare it with the custom software you created in SLD and check its dependencies, most likely you'll experience that there is a difference.
    To solve this press the "Sync SC Dependencies" button on the top. And select the "SCs out of sync with SLD" option.
    Here you will see what is available in CMS and what is only in SLD or vica versa.
    I'll guide you further but first please provide the results of your investigation, i.e. look for your custom SC (e.g. MYCOMP) in SLD and let me know its buildtime dependencies you can see in SLD. Then do the same in CMS and tell me where you can see the differences.
    Thank you and Best Regards,
    Ervin

  • All custom application folders not visible on nwds

    Hi,
    We are using NWDI and NWDS is used as IDE.
    We have created a custom b2b application on NWDS,every step was successfull.
    But now we are not able to see all the folders that should be there inside the custom application.
    This application is running fine also and when we checked for its content on the j2ee server itself
    all the folders were there.
    Does anyone have any idea,whats going wrong and what's need to be done.Somebody told me about public/private but I am not clear on that.Is that can be a reason for this problem.How to resolve this.

    I copied all the folder manually to NWDS and its working fine now.I dont now the reason why those folders were missing.

  • All application folders not visible on nwds

    Hi,
    We are using NWDI and NWDS is used as IDE.
    We have created a custom b2b application on NWDS,every step was successfull.
    But now we are not able to see all the folders that should be there inside the custom application.
    This application is running fine also and when we checked for its content on the j2ee server itself
    all the folders were there.
    Does anyone have any idea,whats going wrong and what's need to be done.Somebody told me about public/private but I am not clear on that.Is that can be a reason for this problem.How to resolve this.

    Hi Arshi,
    I think that the public/private not causes to missing the content in NWDS. Probably  some one deployed this content or application directly using the SDM password and they never check in  this component and that's why the application is working fine and the content got deployed but the latest source  is not available in DTR file system. So, When you sync this application form the DTR  the latest you got  is whatever the previous  version you had and which is missing the latest content.
    Thanks
    Krish

  • Development Component not visible in dev config, but visible in DTR,CBS

    Hi,
    we have recently migrated our production track from netweaver 2004 to 2004s. In the Dev Config perspective I am unable to see a DC, but I am able to see the same from the DTR perspective. I am also able to see this DC in CBS.
    I am unable to create a project or work on this DC because of this problem.
    Has anyone else faced the same problem ? What can be done to make the DC visible in the Dev Config ?
    Thanks in advance for your help.
    Warm regards,
    Rashmi

    Hi Dao,
    Thanks again for your reply.
    Here are the findings :
    1)The DC is not available in both the active and inactive tabs in the Dev config perspetive.
    2) I have only NWDS 7.0 on my machine, but Admin has the older version 6.4 and it was not visible on their machine.
    3) I tried Re-Synching the archives, but still no luck, the DC is still invisible.
    4)The DC was last modified during the creation of the new track, the activities making changes to the DC before that are mostly UI changes, no deletes etc.. which could cause the DC to not be visible.
    5) It is a WD DC.
    6) The DC exists in Cons/Dev (both active/inactive) DTR workspaces as well as CBS build spaces (on both versions of the track)
    7)There are no pending activities for this DC in the old track.
    8)There were couple of broken DCs on the new track but this is mainly because of compile time errors due to use of deprecated methods.
    While checking for all these items I noticed that the .dcref file for the DC is missing in the DTR for both active and inactive, could this mean anything ? Is this the reason for the DC not being visible in the Dev Config perspective ?
    Is there any way to recover the DC ?
    Thanks in advance for your help.
    Warm regards,
    Rashmi

  • How to Re-import model in webdynpro in NWDS 7.1 EHP1 version

    Hi All,
    We have webdynpro DC in NWDS 7.1 EHP1 version, we are trying to re-import the model which already exists in DC. actually in the BAPI ABAP people is added new field in the BAPI structure then we are trying to incorporate the same changes in webdynpro to reflect the new field in model  through the Re-import model.
    But when we right click on model and then selected the re-import then it is not happening any thing in studio its a kind of new action, but ideally in general  it should open the new window where the SAP r/3 credentials should be given to re-import the model. In our case nothing is happening after we right click on the model on selection of "Re-import" model.
    Please let me know what is the issue we have?, do we have any issue with our studio  NWDS 7.1 EHP1 version? or should we follow any other procedure to re-import model in NWDS 7.1 EHP1 version.
    In other versions of studio like earlier versions we were able to re-import the model thru re-import the model by right click on model. but the current version of studio NWDS 7.1 EHP1 should have problem for re-importing the model.
    Thanks,
    Portaluser100

    Hi,
    1.Its Simple way. Just Right click on your Model--- Choose Re-Import. Then choose your RFCu2026Click on Finish
    2. while re import the RFC u will get some error. By cache invalidation and Re Start the J2EE Engine Server you can solve the problem.
    After Re-Import the model you can do cache invalidation
    There is a need to restart the portal system to clear the cache. Once its done your application would work fine.
    Another thing that you can try to clear the cache is
    1. Go to link http://<servername> : <portname> /webdynpro/dispatcher/sap.com/tcwdtools/WebDynproConsole
    2. Click on the last link in detail navigation "Invalidation of ARFC Metadata Cache"
    3. From "Adaptive RFC Metadata Cache Invalidation " tray, choose the JCO that you are using
    4. From " Dictionaries Cache Invalidation" tray, choose the dictionary(model) whose cache you want to clear.
    The above option saves time but in case it doesnu2019t work, you can go in for Portal restart. It would surely work.
    If you have more clarification please read the [Document|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10465350-b4f5-2910-61ba-a58282b3b6df]
    Hope this helps!!
    Best Regards
    Vijay K

  • Application WebDynpro ABAP is not visible in Google Chrome

    Hi Experts,
    After the Upgrade 7.3 EHP1  in Production System it is not visible the application developed in web dynpro ABAP, in the Employee Self-Service Portal.
    In the QA and Development,  applications WD ABAP are visible.
    What can happen in the Production system?.
    Thanks in advance.
    Regards,
    Briger

    >
    Please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "user995809".
    You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s)
    With APEX we're fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
    >
    Hi, I've an item with label-
    &lt;font color="rgb(51,102,153)"&gt;&lt;b&gt;Heading: &lt;/b&gt;&lt;/font&gt;
    Font color is coming in IE but not in google chrome(19.0.1084.52 m). what should I do?
    >
    To start with, always post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.
    Secondly the <tt>font</tt> element was deprecated 14 years ago and is now obsolete. Do not use it. Stop using any reference material that suggests using it.
    <tt>rgb(51,102,153)</tt> is a CSS colour value, which the HTML specification does not require user agents to support for legacy <tt>colour</tt> attributes.
    Use standards-based HTML and CSS:
    <span style="color: rgb(51,102,153); font-weight: bold;">Heading:</span>

  • Email contents not visible using Yahoo mail, Windows 7 pro, FF3.6; email content fine in IE

    New laptop with Windows 7 pro; loaded FF....worked fine for a couple weeks....then, contents in email no longer visible-----just blank box where text would normally appear. Only known changes were auto updates to adobe and auto updates to Windows. Zonealarm security in place since beginning, no changes since installation. When using IE, email is visible.
    Just uninstalled Firefox and reinstalled. Same result....emails still not visible.
    Appreciate any suggestions.....I hate using IE.

    When you send mail the field you mention is used to populate the "ReplyTo: fild in the mail header. Otherwise it has no purpose and setting it to nothing will also work.
    Yahoo are obviously checking that field as you send mail. that is points to a valid address, and I have a sneaking suspicion that is might be required to point to your yahoo mail account.
    Historically the"Nigerian" type scam emails used a replyto address completely different from the one used to send the mail. So even if the sending account was closed down they still got the replies. The mail quite commonly originated in Yahoo and replied to Hotmail accounts. So I guess they have a check to try and discourage that legitimate, but undesirable from their perspective, use.

  • Type AbstractStringBuilder is not visible

    Dear All
    I'm making a web dynpro application and getting the error "type AbstractStringBuilder is not visible".
    Can anybody expalin me why it is coming?
    Latest JDK version is installed on my system.
    From where does the NWDS checks the version of JAVA?
    What should i do to remove this error?
    Request your support.
    Regards
    Vineet Vikram

    Hi Armin
    Problem is solved after i changed my work space for NWDS.
    There was some problem with the .meta file.
    Thanks for your response.
    I have awarded points to you.
    Thanks again
    Vineet

  • How to get the GP Denpedencies(API) for NWDS CE7.1 EHP1

    Hi Frndz...
    I have 3 Qun's..
    1) How to get GP API in EHP1 NWDS7.1 in NWDS 7.0 we can get by D/L gp_api_nw04s.zip,gp_TopLevelDCs.zip and xtracting these to
    Location to Extract gp_api_nw04s.zip=>
    C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\eu\gp
    Location to Extract gp_TopLevelDcs.zip=>
    C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\SCs\sap.com\CAF\_comp\TopLevelDCs
    i done the same thing like above for NWDS 7.1(EHP1) but am not getting the GP Dependcies for development.How can i resolve this.
    2) When am deploying the app with CE7.1(EHP1) app is deploying well but when output coming on browser its giving error , n i changed the browser settings in NWDS to all options but no use.
    3)Am doing CO in which i have two action buttons(result states)for this am going like this
    In getDescription()
    IGPCOResultStateInfo success = technicalDescription.addResultState("Success");
    success.setDescriptionKey("Success_desc");
    IGPCOResultStateInfo reject = technicalDescription.addResultState("Reject ");
    reject .setDescriptionKey("Success_desc");
    In complete()
    executionContext.setResultState("Success");
    executionContext.setResultState("Reject");
    executionContext.processingComplete();
    but after creating the action-->CO am finding only Success Result State only(no Reject Result State), anybody tell me what wrong am doing.
    In my case i have to Result states Accept n Deny , if Approver1 clicks on Accept button flow has goes to Approver2 if not it should goto initiator how zit ??.If anybody have idea plz share with me .

    not answered

  • Images are not visible in the iPhone.

    When I open iTunes there are number of images found in the iPhone, but the images are not visible in the iPhone actually.

    I using local deployment. I deploy my application directly from NWDS to a Mobile Client running also locally in my machine. Maybe I'm wrong, but I think that Mobile Client look for resources in NWDS workspace.
    This is the dpi file located in the Mobile Client inbox folder when I perform the deployment.
    <?xml version="1.0" encoding="UTF-8"?>
    <deployment>
    <device>
    <repository>
    <mcd name="IrviaDemoApp" namespace="" version="1">
    <action type="install"/>
    <location type="local">
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\MOBILE-INF\MCD.xml" property="mcd" type="file"/>
    <component name="hpcds.es~irvia_demo_app">
    <applications>
    <application deploy="true" name="IrviaDemoApp"/>
    </applications>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\bin" property="bin" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp" property="gen_wdp" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\src\mimes" property="mimes" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp\application-j2ee-engine.xml" property="j2ee_xml" type="file"/>
    </component>
    </location>
    </mcd>
    </repository>
    </device>
    </deployment>
    There is a <source> entry for the mimes directory, where "Component images" are located.
    PD: Sorry about my poor english. I hope you to understand me.

  • Modified changes to ESS DC are not visible

    Hello Experts,
    I have imported the DC and checked out. I have modified essusfam~sap.com by adding a text field and input label. Saved all my changes and tried to deploy the code from the context menu in webdynpro explorer. NWDS prompts for SDM pasword and later I see the deployment sucessfull. But, the changes are not visible. Just want to know if I am missing any steps before deployment. or do I need to follow any more steps.
    I am trying not to use NWDI deployment process
    Thanks,
    Sharath.

    Hi Sharath,
    When building, choose project then right click and select build... from Development Component section.
    Regards,
    Raj

Maybe you are looking for