PERWSHRG form - How to end/terminate and assignment with end dated entered by user Apps R12.1

Hi All.
How to end/terminate and assignment with end dated entered by user Apps R12.1?
when i try to end or terminate and assignemnt the sysdate is begin registered for effective_end date.
any help is reaaly greatly appriciated
thanks and regards
Soni

Hi Soni,
What is the end date you want to enter as. Are you talking about 31-Dec-4712. If not, please change the sytem effective date (calendar icon on the oracle menu) to the date you want to terminate and follow the termination process.
Thanks,
Avinash

Similar Messages

  • REGARDING WCM( work clearnce management )how it start  and assign with PM ?

    DEAR Guru's
    i am fresher in PM module and i want to start pm and vice-verse WCM i have an idea about PM module but not Work Clarence Management so how to start it and assign with PM module and also its configuration and end user document if you have these document then plz do needfully
    regards
    Atul sharma
    9909973893

    Hello Atul,
    Frankly, I'm also not aware of WCM process or steps... but just in case it helps you.
    Refer - http://help.sap.com/saphelp_47x200/helpdata/en/2b/1b713896fab752e10000009b38f889/content.htm
    Also try to search SAP WCM on google.. hope you will find something.
    Regards,
    Anup

  • How can i access and assign java xml Document variable in javascript block

    How can i access and assign org.w3c.dom.Document variable in javascript block
    I tried this xmlDoc = "<%=xmldoc%>";
    it is not working
    plz give me solution.
    thanx
    Vidya

    The solution would only work on MS IE browsers, as other browsers do not support an XML DOM.
    It can be done, but you would be stuck with using the Microsoft broswer. If that is acceptable, I have some example code, and a book recommendation.

  • How can I terminate my account. I am a PC user and cannot load my books.

    How can I terminate my account. I am a PC user and cannot load my books.

    Create a NEW account/ID using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
      Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    More details of how:
    http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/

  • How to replace # or Not assigned with blank in BEx Query Output.

    Hi,
    While running the query through BEx Query desginer or Anlayser, I am getting # or Not assigned where there are no values.
    The requirement is to "Replace # or Not assigned with a blank" in the output.
    I want to know, is there any setting in BEx query desginer where we can do this. How to do this.
    Please share your inputs on this. Any inputs on this would be appreciated.
    Thanks,
    Naveen

    Check out SDN-thread: "Re: Remove 'Not assigned'" for more details
    Ideas from SDN research:
    "a solution i have used is to put each RKF column in a CKF colum then in each CKF use RKF + 0, the outcome is that your # should now be 0s, in the query properties you can set the option to display 0s as blank."
    "try to enter a text for the blank entry in the master data maintenance of the relevant objects and set the display option for the objects to 'text'."
    Threads:
    SDN: How to replace # or Not assigned with blank in BEx Query Output.
    SDN: Re: Remove 'Not assigned
    SDN: How to replace # or (Not assigned) with blank in BEx Query Output.
    SDN: Bex Analyzer : Text element system's table ?  
    SDN: change message in web application designer ["nonavailable" ->  136 of SAPLRRSV]
    SDN: Not Assigned ["Not Assigned -> 027 of SAPLRRSV]
    SDN: replacing '#'-sign for 'not assigned' in queries
    SDN: # in report when null in the cube
    SDN: How to replace '#' with blank when there is no value for a date field
    Edited by: Thomas Köpp on Sep 13, 2010 5:20 PM

  • How to get gui_download and gui_upload with popup filename?

    how to get gui_download and gui_upload with popup filename?

    Here is a short example.
    report zrich_0003 .
    data: ifiletab type filetable.
    data: xfiletab like line of ifiletab.
    data: xstring type string.
    data: rc type i.
    data: itab type table of string.
    data: xtab type string.
    start-of-selection.
      call method cl_gui_frontend_services=>file_open_dialog
        changing
          file_table              = ifiletab
          rc                      = rc.
      read table ifiletab into xfiletab index 1.
      xstring = xfiletab-filename.
      check not xstring is initial.
      call method cl_gui_frontend_services=>gui_upload
        exporting
          filename                = xstring
      changing
        data_tab                = itab.
      loop at itab into xtab.
        write:/ xtab.
      endloop.
    Regards,
    Rich Heilman

  • How to create database and table with GUI?

    How to create database and table with GUI?
    for linux can do that?
    or have only way to create table by use sql*plus.
    everyone please help me.
    thanks

    go to www.orasoft.org
    here is a gui tool.
    null

  • How to pass username and password with the portal url

    i want to access portal from my web site. i have created username and password fields in my web page. when submited , my portal page should open. so how to pass username and password with the portal url.

    This is not straightforward; but it is doable.
    First tell us about your portal version; portal 10.1.4 has a slightly different method of doing it and the pre-10g portals were completely different animals.
    And if you are in AS Rel 2, then the most important document for you would probably be the following:
    [Creating Deployment Specific Pages| http://download-west.oracle.com/docs/cd/B14099_19/idmanage.1012/b14078/custom.htm#i1015535]
    You might want to use it in conjunction with some metalink notes about your portal version and such a login page.
    hope that helps!
    AMN

  • How can I authenticate and authorize with Web Service on ESB ?

    Hello,
    I want to authenticate and authorize client with Web Service published
    by HTTP/SOAP BC.
    Simply if it is an Web Service as J2EE application, I will use
    Basic Authentication with JAX-RPC and Realm.
    But I think that Web Service published by HTTP/SOAP BC is not belong
    to J2EE Application. Threre is no place to describe security role mapping
    (like web.xml).
    JBI 1.0 the section "5.5.1.1.3 Normalized Message Properties" comments
    JAAS Subject is given in the NM Properties. Really in this package
    com.sun.jbi.internal.security.*
    implements JAAS autentication and authorization (at JaasAuthenticator).
    But I can't see how to configure my Service to use this.
    How can I authenticate and authorize with Web Service on ESB ?
    I referred to the resources.
    Mutual Authentication for Web Services: A Live Example
    http://developers.sun.com/prodtech/appserver/reference/techart/mutual_auth.html
    XML and Web Services Security
    http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security7.html
    JAAS Authentication Tutorial
    http://java.sun.com/j2se/1.4.2/docs/guide/security/jaas/tutorials/GeneralAcnOnly.html
    Thanks,
    Takurou
    - environment ---------------------------------------------
    OpenESB : Project Open ESB Starter Kit
    AppServer : Sun Java Systems Application Server 9.0 PE
    OS : Windows XP
    I don't assume to use SSL (if It's necessary I will try).
    User information is stored in a LDAP Server.
    -----------------------------------------------------------

    Hello,
    I read this resource.
    SecurityDesign
    http://www.glassfishwiki.org/jbiwiki/Wiki.jsp?page=SecurityDesign
    Then I think [non-ssl and ssl/tls and so on] securing by basic authentication is ongoing feature at this time.
    But I can't see well why this page comments 'HTTP over SSL, TLS'.
    HTTP/SOAP Binding Component Overview
    http://download.java.net/general/open-esb/docs/jbi-components/httpsoap-bc.html
    Does BC support only "SSL server authentication" ?
    Doesn't BC support "SSL client authentication" by username/password ?
    Thanks,
    Takurou

  • Anyone knows how to export ROLES and SYNONYMS with exp command?

    Anyone knows how to export ROLES and SYNONYMS with exp/imp commands?
    Help is needed. Thanks.

    Hi,
    Pls. post this query in RDBMS forum since Portal export import forum does not handle this.
    Thanks,
    ~Kirit.

  • How to use audio and mic with multipoint server with out it crashing on you

    how to use audio and mic with multipoint server with out it crashing on you when i use them to make calls thru my station (zero client) at the same time it crashes on me and i need to restart the multipoint is there a setting i may have mist that enable's
    them to work at the same time and if posible can i use a non USB device 

    Look for "Single Sign-on Using Kerberos in Java" in google or on Sun's web site. Maybe this paper will help you.
    Claude

  • Remove PR Mandatory for PO and Assign new PO Layout to one User

    Hi Experts,
    I want to remove PR mandatory for PO and assign new PO Layout for one User. I am facing following problem.
    1. I have already created a function authorisation Z1 with reference to PR and assign the same in SU01, Paramenter EFB - Z1.
    Now I have removed ref to purchase requisition tick and assign new PO layout in Z1.
    But ref to PR not removed, and new po layout is not coming.
    What should I do.
    Thanks in advance.
    GR

    why dont u assign the new PO screen layout to the PO document type thru spro-mmpurchasingpo-define document type---here assign ur new field selection with the PO document type coz whatever the screen layout of PO comes while processing me21n,it comes due to the field selection present here as per my knowledge.
    regards,
    indranil

  • How to create an install cd with the final cut pro x app if the app comes from App.Store?

    How to create an install cd with the final cut pro x app if the app comes from App.Store?

    Just copy the Application FCPX to your CD. When you want to install drag the FCPX to the Application folder and you are done.

  • How to find workflow and assign a  user to workflow

    Hi Gurus,
    How to find  the existing workflows, and assign a  user  to a role.
    <REMOVED BY MODERATOR>
    B S B
    Edited by: Alvaro Tejada Galindo on Jan 24, 2008 11:17 AM

    Goto Tcode PFTC.
    Select the task type as Workflow and serach.
    Naveen.

  • How to create groups and assign users thru program

    Hi,
    I am planning to create groups by program and assign users to them based on some condition.Once users are assigned to those groups we need to change the Language value for those users in User profile
    We are using Central User Administration.
    Please let me know the solution
    Thanks
    Bala Duvvuri

    probably you can use this code to create a group
    IGroupFactory groupFact = UMFactory.getGroupFactory();  
    IGroup group = groupFact.newGroup(wdContext.currentContextElement().getGroup()); 
       group.commit();
    for this required com.sap.security.api.jar

Maybe you are looking for