Petition: Creative to change it so we can put a specific time for backlight on micro to go on/

CREATIVE TO CHANGE IT SO WE CAN PUT A SPECIFIC TIME FOR BACKLIGHT ON MICRO TO GO ON/OFF. Wouldn't it be nice during the daytime to save battery and have the backlight off, and then during the night have the backlight on, WITHOUT going to settings every single time to change it. Or in the menu creative could add a backlight shortcut, so when pressed the backlight will go on/off. PLEASE SIGN AND LEAVE YOUR OPINION... Thank you
Message Edited by noappendix90 on <SPAN class=date_text>06-02-2005 <SPAN class=time_text>0:22 AM
Message Edited by Catherina-CL on 06-02-2005 0:4 AM

In the interest of preseving battery life - my backlight is on permanent off (unless I specifically need it, say on a red-eye flight and its way dark in the plane), so this isn't so much of an issue to me.
What I would like to see, again as a power-saving thing, is an option to turn off the display altogether. For example, set the unit so after so much time (30 sec) the entire display turns off, and then comes back on when you hit the touchpad.

Similar Messages

Can I write Design-time for JSP custom tag(not JSF components)

I have some old JSP custom tags(not JSF components), and I want to use them in the IDE through the toolbox.
Now I have already written the BeanInfos for these tags, and they can be drag from the toolbox; but it will throw a Exception when render the tags, and the properties in the Property Editor are not which I describe in the BeanInfos.
How can I write Design-time for these tags? or whether it is possible to write the Design-time for these tags?
the Exception is shown as follow:
java.lang.ClassCastException
     at com.sun.rave.insync.faces.FacesPageUnit.renderNode(FacesPageUnit.java:1347)
[catch] at com.sun.rave.insync.faces.FacesPageUnit.renderBean(FacesPageUnit.java:1086)
     at com.sun.rave.insync.faces.FacesPageUnit.getFacesRenderTree(FacesPageUnit.java:993)
     at com.sun.rave.css2.FacesSupport.getFacesHtml(FacesSupport.java:152)
     at com.sun.rave.css2.CssContainerBox.addNode(CssContainerBox.java:373)
     at com.sun.rave.css2.CssContainerBox.createChildren(CssContainerBox.java:354)
     at com.sun.rave.css2.DocumentBox.createChildren(DocumentBox.java:90)
     at com.sun.rave.css2.DocumentBox.relayout(DocumentBox.java:160)
     at com.sun.rave.css2.PageBox.layout(PageBox.java:392)
     at com.sun.rave.css2.PageBox.relayout(PageBox.java:454)
     at com.sun.rave.css2.DocumentBox.redoLayout(DocumentBox.java:313)
     at com.sun.rave.css2.PageBox.redoLayout(PageBox.java:460)
     at com.sun.rave.css2.DocumentBox.changed(DocumentBox.java:634)
     at com.sun.rave.designer.DesignerPaneUI$UpdateHandler.changedUpdate(DesignerPaneUI.java:1012)
     at com.sun.rave.text.Document.fireChangedUpdate(Document.java:851)
     at com.sun.rave.text.Document$5.run(Document.java:631)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

I have some old JSP custom tags(not JSF components), and I want to use them in the IDE through the toolbox.
Now I have already written the BeanInfos for these tags, and they can be drag from the toolbox; but it will throw a Exception when render the tags, and the properties in the Property Editor are not which I describe in the BeanInfos.
How can I write Design-time for these tags? or whether it is possible to write the Design-time for these tags?
the Exception is shown as follow:
java.lang.ClassCastException
     at com.sun.rave.insync.faces.FacesPageUnit.renderNode(FacesPageUnit.java:1347)
[catch] at com.sun.rave.insync.faces.FacesPageUnit.renderBean(FacesPageUnit.java:1086)
     at com.sun.rave.insync.faces.FacesPageUnit.getFacesRenderTree(FacesPageUnit.java:993)
     at com.sun.rave.css2.FacesSupport.getFacesHtml(FacesSupport.java:152)
     at com.sun.rave.css2.CssContainerBox.addNode(CssContainerBox.java:373)
     at com.sun.rave.css2.CssContainerBox.createChildren(CssContainerBox.java:354)
     at com.sun.rave.css2.DocumentBox.createChildren(DocumentBox.java:90)
     at com.sun.rave.css2.DocumentBox.relayout(DocumentBox.java:160)
     at com.sun.rave.css2.PageBox.layout(PageBox.java:392)
     at com.sun.rave.css2.PageBox.relayout(PageBox.java:454)
     at com.sun.rave.css2.DocumentBox.redoLayout(DocumentBox.java:313)
     at com.sun.rave.css2.PageBox.redoLayout(PageBox.java:460)
     at com.sun.rave.css2.DocumentBox.changed(DocumentBox.java:634)
     at com.sun.rave.designer.DesignerPaneUI$UpdateHandler.changedUpdate(DesignerPaneUI.java:1012)
     at com.sun.rave.text.Document.fireChangedUpdate(Document.java:851)
     at com.sun.rave.text.Document$5.run(Document.java:631)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

Will my mac back up to time machine wile it is on but shut (asleep) and can you set a time for backups???

will my mac back up to time machine wile it is on but shut (asleep) and can you set a time for backups???

If your Mac Model supports POWERNAP under Mountain Lion, yes backups and software updates can occur while the mac is taking a power nap (kind of light sleep).

Can you ask for a specific time for your package to be delivered

can you ask for a specific time for your package to be delivered

You can only arrange that with the shipper after your package is shipped (and before it is deliverd.) When the package is shipped Apple usually emails the tracking information.

I am so confused. I am thinking about buying an iPhone 4S but I want to use those card things that you can put the code in for the phone is this possible? I'm not talking about the 50$ unlimited card just the regular 20$ cards that hold mins and texts...

I am so confused. I am thinking about buying an iPhone 4S but I want to use those card things that you can put the code in for the phone is this possible? I'm not talking about the 50$ unlimited card just the regular 20$ cards that hold mins and texts... As long as it has the support for the service it's hooked up to?

As far as I know there is no US cell carrier that allows pay as you go with an iPhone. You can purchase an unlocked iPhone 4S at an Apple Store and try it with a non-supported carrier.

Need karaoke songs I purchased to have the lyrics so I can put on a cd for playing in karaoke machine

need karaoke songs I purchased to have the lyrics so I can put on a cd for playing in karaoke machine. why bother purchasing karaoke music if the lyrics are not there? If you can purchase entire movies, why not music and lyrics? Apple should offer in iTunes but instead customers are going to other karaoke sites and spending their money elsewhere.

Kitty,
Unfortunately, the iTunes Store does not sell karaoke tracks. Any song labeled "karaoke" in the iTunes Store is simply an instrumental backing track.
By all means, check out the alternatives and buy from the retailer that sells what you want.
If you would like to make a suggestion to Apple, use the iTunes Feedback page:
http://www.apple.com/feedback/itunesapp.html

TS1702 Please can't make FaceTime for free for all iMac it's mean Apple can't make face time for free for snow leopard ?

Please can't make FaceTime for free for all iMac it's mean Apple can't make face time for free for snow leopard ?

did Yamaha/Apogee ever work out the problem that you couldn't use mLAN drivers for the XS (it's not really mLAN, it's "based on" right?) and Apogee drivers at the same time?
I think Yamaha has updated their drivers twice since you and I last exchanged ideas on this.
You've got killer hardware, and while I'm sure it's possible to set up an XS to send MTC and for Logic 8 to deal with correctly, it's just backwards of the way I use (almost) the same tools. My experience is the same, control Logic from the Motif, only it's so much more than just stop/start, and locate. Your XS is made to be a remote controller for Logic, sliders, transport controls, even the info for tracks and plug-ins (in Logic!) show up on your XS display and you can do plenty without touching the keyboard or mouse... Besides the sound of the Motifs, they're just great at doing this kind of stuff too... I personally wouldn't consider anything else...
I don't want to send you down a path that won't work if the two vendors in question haven't solved this yet, but... I want to help you but deep inside I think you're approaching your top-of-the-line gear backwards...
of course, if this is still a vendor incompatibility thing... then you have no choice.
pages 839 (the graphic is on page 838) of the Logic user manual under "listen to MMC input" describes what you need to set in Logic 8 to make this work. Since I don't have an XS, I can't point you to the correct pages for that.
I really hope you can get this to work.
Michael

Changed router box - and can't re-connect time capsule ?

I have upgraded my wlan router box - and therefore changed my network name - and i can't reconnect my time capsule. In airport utility it doesn't pick it up. Please help ?

Your Time Capsule was programmed to remember the settings to "join" your "old" wireless network. It is still looking for that network to connect, but cannot because the network is no longer there.
You will need perform a Factory Default Reset on the Time Capsule and reconfigure it again with the correct settings for your new wireless network.
I am sure that you know the name of the network, but you may not know the exact type of wireless security that your new wireless router is using.
Check your documentation to find out about this, as you will need to provide the Time Capsule with the correct information to join the new network.
If the Time Capsule does not receive the right settings, it will not be able to join the network and you will see a blinking amber light instead of green on the Time Capsule after you save the configuration settings by clicking Update.
The Factory Default Reset is a bit tricky....you almost need 3 hands.
Pull the power cord from the back of the Time Capsule
Wait 4-5 minutes
Hold in the reset button and keep holding it in for another 8-10 seconds while you simultaneously plug the power back in to the Time Capsule
Release the reset button after the hold period and allow approximately 30 seconds for the Time Capsule to restart to a slow, blinking amber light
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Continue to follow the guided setup to configure the Time Capsule to "join" your wireless network
A green light about 25-30 seconds after you click Update will signal a successful setup. If you only get the blinking amber light...you will need start all over with the Factory Default Reset and try again.
The reset will not affect the existing backups on your Time Capsule, but you will need to reset Time Machine again to get backups going. Post back if you need info on this.

Can't get specific URL for blog entry.

I run a blog at http://www.w0rdvomit.com and I want to get a separate page link for each blog entry, but when I click on it all it says in the url bar is www.w0rdvomit.com. Is there any way that I can change it so I can have the blog links come up also?

If your blog is just displaying your domain name for every page, then you are probably using masked web forwarding?
To get anything different, then you need to set up CNAME forwarding, so enter your domain name into your MobileMe account and then go to your domain name registrar and go to the DNS settings and set up a new CNAME with the alias as your domain name and your host as web.me.com. This is the only way it will work and if you want to do this but your domain registrar does not offer CNAME forwarding, then you are looking at moving your domain name to somewhere that does offer this such as GoDaddy.

Can I set a time for music in iTunes to stop

I use an iPad to play my music to an Airplay speaker. I sometimes use the playlist on my iPad and if I want to increase my listening pleasure I would use Remote to play from my entire libray on the iMac.
I've looked but can't seem to find any way of setting a timer for playback. I listen to music at night and rather than have it play the entire night. Dose anyone know of a a utility/app for atimer setting in iTunes?
I believe Apple sould consider this feature for a future addition to iTunes.
Thanks,
HJKeats

It is not yet a built-in feature, but there are quite a few sleep timers around.
For example:
http://en.softonic.com/s/sleep-timer:mac
I have not tried them, however

How Can I set Specific RingTone for one person and general ringtone for all?

Hello All,
I have a problem with ringtone. I want to set specific ringtone for manager in my 99 series ip phone. Customer needs to know when manager calls him, that is why he told me that he wants to set specific ringtone for Manager.
Thanks a lot
Bahlul

Hi Bahlul,
I don't see such a feature on CUCM where you can have a separate ringtone for a Directory number based on the calling party number. Even to have separate ringtones for different lines on the same IP phone you need to play with Distinctiveringlist.xml , but that too does not fit your requirement as it will always be the same ringtone for all the calls on that line. You may probably get this feature through some third party solution but i am not sure if it would be worth it for applying it on one phone only.
HTH
Manish

Can anyone communicate the time for SDK availability?

Can anyone clearly tell the time for the SDK availability? May this will help others who are waiting to download the SDK.
I came to know that, the SDK will be available from today? But still i am waiting for the link.
Thanks,
Thamizharasu S

I'm waiting too..
Did you readed this blog entry? http://blogs.sun.com/mgorshenev/entry/javafx_1_0_release
Very interesting...
Bruno Grossi

How can i calculate execution time for methods?

I'm making a project that i want to calculate execution time for a
method in "miliseconds" or "microseconds".You see,I have a sort algorithm and i want to calculate execution time of this algorithm.How can i do?
Thanks...

Just remembered.
The answer you get isn't trustworthy below a hundred millis, so you may need to sort a hundred or a thousand times to get a reasonable elapsed time. You also need to run the test five or ten times and take an average. In Windows you should fire up the Task Manager and be sure that your other CPU usage is as near to zero as you can get.

How can I get the time for a simulate signal express vi waveform?

I tried converting to an array and then indexing, but every index I try only gives me the y value. See attached VI for clarification on what I mean.
Attachments:
simulate signal.vi ‏49 KB

You will have to keep track of that yourself. You are sampling at 360kHz. This means that each sample is ~2.8us. You can easily get the time by taking that dt (2.8us) multiplied by the sample index and adding the time at which the first sample was taken.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How can i set a specific time for a transaction code to be run?

I want to know if a certain Transaction Code (not only the customized tcodes) could only be run on a specific time (ie. 4pm to 6am only)

There are two ways to achieve the purpose you wanted:
1. If the work to be done by this Tcode can be processed automatically without any interactive session (dialog user) then I would suggest it to process as Batch Job in the time period you specified. And make sure that none of the users are not having corresponding authorization to execute the same task in foreground.
2. If you need the Tcode to be executed only when you can monitor then the best way is to monitor the users containing the Tcode through SM20 audit log as a Mitigating control.
No such facility is currently available to protect a Tcode for a particular time interval in a day. You may write a message to SAP for suggestion.
regards,
Dipanjan

Petition: Creative to change it so we can put a specific time for backlight on micro to go on/

Similar Messages

Maybe you are looking for