Petition for Zen for allowing more than 20 songs in Highly Rated, Most Popular, Rarely Heard, e

Hi
I rate my songs with the rating system programmed in my Zen, but having ONLY 20 song links defeats the purpose for having quick acces to my favorite songs. I'm no programmer, but I believe it can be easy to remove/replace the 20 song limit and let the owners of a Zen choose the limit. I'm annoyed that I have to remove stars from my favorite songs so new ones can take its place.
I've seen some topics complaining about this but it was not a petition, see:
http://forums.creative.com/showthrea...t=6323#M208555
Thanks in advance.

Is this the one you are referring to I don't think you can check the number of tracks generated.
[img"]http://thm-a0.yimg.com/nimage/76d0b7b2ca42544[/img] width="45" height="0" />

Similar Messages

  • HT1212 How do I perform step 5 in the Recovery Mode when an iPad minnie has been disabled for having more than the allowable entry attemps?

    How do I perform step 5 in the Recovery Mode when an iPad minnie has been disabled for having more than the allowable entry attemps ?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Can more than one song be selected for slideshow on IPhoto? If so how

    Am trying to put together slideshow of granddaughter's birthday party but want to use more than one song as have a lot of photos.

    Thank you for sharing your expertise. I have taken that and tried to create a document on how to do this. You will see some different/additional comments. My idea is to share it with everyone once it is finalized. I am about ready to try and walk through all the steps for real but would ask you to read this over before I commit several hours more to this project. Any comments are appreciated. I am concerned about steps 9 through 13. Not sure i have it right. Any comments will be appreciated. Maury
    ++++++++++++++++++++++++++++++++
    How to create a Slideshow on DVD
    with music
    using iPhoto and iTunes
    as input sources
    1. Select, crop, and fix slides needed from the iPhoto library. Put them into a newly named folder. (Not a slide show.)
    2. Import this folder into iMovie using KenBurns ON.
    3. Add any necessary transitions between various segments of resulting movie.
    (This should be the finished visual project. Using this write down the exact timing needed for stop/start each segment and the total length of the movie.)
    4. Go to iTunes and select various tunes/songs/music desired.
    5. Go to Amadeus and open a new file. (This single will end up the same length as the visual project).
    6. Open JACK to connect iTunes to Amadeus.
    7. Choose a tune, find the correct snippet of music and adjust to stop/start times from 3 above. Move your snippet to Amadeus. Use cross fade so one snippet will blend into the next one. Load these in the correct order of the slideshow segments.
    (Note: Music purchased from the iTunes Store is "protected" in ACC and will no render into another format. This means it cannot be used in this example. A major inconvenience.)
    8. Your result will be string of snippets strung together in proper order and in total making up a single file the same length as your slideshow.
    9. Paste this new music file into the iMovie.
    10, Close iMovie.
    11. Open iDVD, select your theme and leave the menu window open.
    12. Open the iMovie project file (Control-click on it and select Show Package Contents) and navigate to the Shared Movies/iDVD folder.
    13. Drag the .mov file in there into the open iDVD window being sure not to drop it into any menu drop zones.
    (You'll know if you are in a drop zone (if there are any) since a text link appears with the same name as the movie file you're dragging.)
    (This allows iDVD to do the rendering thus eliminating two renderings on the same file which reduces image quality......)
    14 Save the project to Disk Image instead of burning directly to disk.
    15. Open the disk image and launch DVD Player.
    This will let you check out the finished project with DVD Player before committing to disk. You'll be able to check out the audio sync, typos etc.
    16. When you are ready to burn to disk use File>Disk Utility.
    (See: Burning a disk image file on a CD or DVD in Mac OS X.) The first step, saving to Disk Image is the encoding process and takes the longest time. Often it will seem like it's hung on the audio encoding but let it go on and on, as it often is the longest part of the encoding process.
    17. This should be the finished product.
    18. Snail Mail DVD to adorable grandchild and wait for parents to call saying it made them both cry. (Of course, this implies you are a grandparent.)
    Credits: Old Toad and Maury56
    Software: iLife 06 (iPhoto, iTunes, iMovie, and iDVD); DVD Player; Amadeus; and Jack.
    +++++++++++++++++++++++++++++++++
    About item 16, is there any way to tell the difference between "hung up" and "encoding" while it is going on?
    Maury
    PowerMac G4   Mac OS X (10.4.6)  

  • Setting Equalizer for more than one song at a time

    Is there any way to set the equalizer setting for more than one song at a time. For example, if I have a classical music album with 10 songs, can I set the equalizer for "classical" for all 10 songs at once? It's a pain to have to do it for each one individually. I tried using the "shift" key, but to no avail.
    Thanks,
    Joe The Author

    highlight all the songs you want then right click and go to get info. in the options tab at the top there is an equalizer preset option.

  • I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • How to increase the Heap space of Jdeveloper for about more than 512 MB?

    When starting JDeveloper, the application within JDeveloper is throwing the error message:
    "could not reserve enough space for object heap"
    and a windows popup with the following error message:
    "Unable to create an instance of the Java Virtual Machine Located at path: ..\..\jdk\jre\bin\client\jvm.dll "
    To resolve these issues, i know that adding the following in ide.conf , jdev.conf will help.
    AddVMOption -XX:MaxPermSize=512M
    AddVMOption -Xmx512M
    AddVMOption -Xms512M
    I have got 10 GB of RAM in my desktop machine and virtual memory of 15 GB (page size). I am not able to increse the heap space of Jdeveloper for about more than 512MB. This is really frustrating..I had to restart my jdevloper after 3 or 4 deployments.....Has anyone tried success in increasing the heap space in jdeveloper for about 2 GB?
    Regards
    Prasath.C

    Yes, i know that -XX:MaxPermSize has nothing to do with Heap Memory. I Just pasted all my configuration settings to know if some thing or the other has caused the issue.... After hearing few people who increased the heap space to more than 512m , i played with those settings again and figured out few things...Mine is Jdeveloper 11.1.1.4, 64 bit Windows 7 environment, 64 bit Java/ JDK.
    First, i was deceived by one suggestion in forum that, keeping max and min heap memory to same size always will yield in good performance...From that time on wards, i was always increasing both and was never able to move more than 512m..But this time, i kept the min memory as constand and kept on changing the max memory ..
    Jdev.conf
    AddVMOption -XX:MaxPermSize=512M
    AddVMOption -Xmx972M (I was never able to increase more than this size, though i have around 10GB RAM, if not Jdev doesnt startup)
    AddVMOption -Xms512M
    Ide.conf
    AddVMOption -Xmx2048M (here i was able to increase)
    AddVMOption -Xms512M
    But even then, i was not seeing my changed settings at the time of deployment...
    starting weblogic with Java version:
    java version "1.6.0_21"
    Java(TM) SE Runtime Environment (build 1.6.0_21-b51)
    Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
    Starting WLS with line:
    C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms512m -Xmx512m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer ..........
    Then i changed again into
    setDomainEnv.cmd of my default domain
    set USER_MEM_ARGS=-Xms512m -Xmx2048m -XX:MaxPermSize=512m
    Then i stared my deployment...this time i could see a real boost in deployment...and my page was launched in a fraction of minute..
    tarting weblogic with Java version:
    java version "1.6.0_21"
    Java(TM) SE Runtime Environment (build 1.6.0_21-b51)
    Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
    Starting WLS with line:
    C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms512m -Xmx2048m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer ..........
    This is my working configuration....Thanks guys for your replies.....
    Regards
    Prasath.C
    Edited by: Prasath C on 05-Aug-2011 04:41

  • Maintenace view for fld more than 500 characters

    Ho do i create a maintenance view for fld more than 500 characters? i  need a maintenance view to maintain URL which is sometimes more than 500 chars.

    The way SAP solves this for webservices is via a hash.
    Once you have executed the service, the URL populates a mapping table and generates a unique hash value for it.
    Via this hash, you can assign it to authorization fields and use it in your coding where the fields have limitations.
    As a consequence this causes some confusion if you dont use F4, but it does work.
    Cheers,
    Julius

  • More than one song for one slideshow?

    Is it possible to play more than one song, or like a playlist, for a slideshow? I have tried selecting a whole playlist and it shows how many items are selected, but after the first song plays it plays again and again. My slideshow is over 1,000 pictuers long and I do not want to continue to play the same song over and over, is there any way to do this?

    I have play lists that I select and that play with slide shows - This may be one of these things like saving photo edits that seem to randomly work and ramdomly do not
    At one time it looked like selecting multiple songs would work but it seems not to but, at least for me, selecting a play list does work.
    Please report to Apple -- iPhoto menu ==> Provide iPhoto Feedback
    Larry Nebel

  • What do you think about using exceptions for something more than errors

    if you look the java.lang.Exception description at the JDK javadoc, you can see the following text:
    "The class Exception and its subclasses are a form of Throwable that indicates conditions that a reasonable application might want to catch."
    ... we can�t see "error" word anywhere!!
    What do you think about using exceptions for something more than errors? Can be possible use them as a way for send information to upper layers?
    Thankx in regards...

    it seems that what you say is a functional way of achiveing that, yes
    but Exceptions are generally reserverd for "Exceptional" situations ie program messing up or invalid data
    it does require a fair bit of processor time to actually generate and throw an Exception.
    so, all in all its "better" to use "normal" condition flow control to achive what you want.. you can always return early, break loops, call methods to pass information

  • TS1424 I need a new Battery for my I POD.  I POD will not hold a charge for more than 10 songs.  Model # = M9800LL - Version = 1.4.1

    I need a new Battery for my I POD Touch.  I POD will not hold a charge for more than 10 songs.
    Model = M9800LL
    Version = 1.4.1

    The battery in the iPod is not user-replaceable. Take your iPod to an Apple Store or contact Apple Support and they can arrange replacement.
    http://www.apple.com/support/ipod/service/faq/
    Regards.

  • How do I configure the Airport utility to allow more than one rule per port?

    How do I configure the Airport Utility (AU) to allow more than one rule per port?
    I am on a home network, with broadband cable modem.  I have my airport extreme connected to the broadband modem.  I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols.  The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists". 
    I need to be able to allow SSH on both of my servers, for instance.  Am I missing something?  Is this doable with AU?
    Thanks for any insight.
    Khalid

    The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
    What you won't be able to do is map a single or multiple ports to multiple IP addresses.

  • How do I use AE to allow more than one device with my cable modem?

    I connected by AE to my cable modem at my house in Japan and it works fine on "bridge mode," but only for one device at a time (this laptop, but not my iPod Touch, or vice versa). As soon as I connect a new device, it will kick the other one off. It seems that my cable modem here will only allow one device. Is there a way that I can use my Airport Extreme to allow more than one device and not have to pay the Internet provider extra for multiple IP addresses? How do I go about this? Do I select "share a public IP address" or do I select "distribute a range of IP addresses?" I tried these options but obviously wasn't doing it correctly, because then I lost the connection for everything... Thanks!

    It would be best if you "hard reset" the Airport Extreme to clear out the old and conflicting settings and then reconfigure it again.
    Hold in the reset button until you see the amber light begin to blink more quickly. Keep holding for another 3-4 seconds when you see this and then release the reset button. That will get the Extreme back to the original starting point.
    After you have powered the modem back up after the full reset, you will need to reconfigure the AirPort Extreme again. If you are using he guided setup in AirPort Utility, you will choose the option to "create a wireless network" during the setup.
    If you are using the Manual Setup, the Wireless Mode will be "Create a wireless network" and the setting for Connection Sharing would be "Share a public IP address". Adjusting the Connection Sharing setting would be the last thing that you do before you click Update to save settings.
    Here, I am assuming that you have a simple cable modem (it will have only one ethernet port), correct?

  • ITunes will not allow me 2 add more than 3 songs at one time in2 my library

    iTunes won't allow me to add more than 3 songs at one time into my library. I just want to select a number of songs in 'My Music' folder on my pc and then add them in one go. I used to be able to on older versions of iTunes, but now it will only let me add 3 songs (using the 'add file to library' option), and no more then one (using the 'import' option). It's just very annoying as it takes aaages to add songs into my library, when it shouldn't. if anyone knows how to overcome this, please let me know! Thanks
    Message was edited by: 5Gmel

    how did u do it i've being trying for a long itme now and it takes forever to add music please share

  • How to write validation in java sript item should not allow more than 20 ch

    HI,
    I need to write validation in java script for a item it should not allow more than 20 characters.
    Thanks
    Nr

    If this answers your question, please mark your question as answered (so everyone knows it is answered) and assign points where you see fit..
    Thank you,
    Tony Miller
    Webster, TX

  • Should not allow more than one attendance or absence code on any given day

    Hi Hr Experts ,
    I need to use customer enhancement in my program.
    CATS should not allow more than one attendance or absence code on any given day. requirement is
    that each day will be either a full attendance or full absence and there will not be any mixture.
    Function/Program: u2022
         EXIT_SAPLCATS_006: CATS: Validate Entire Time Sheet
    transaction code CAT2.
    how to code the same?

    hai,
    check the Time constraint class for absence/attendance types.
    Regards,
    Chiran Reddy.

Maybe you are looking for