------- Petition! (idk if this has been made yet) Option of changing the intro screen on Mi
What do you guys think of being able to change the introduction spalsh screen on the zen micro? Personally I think it's a great idea! I guess it could add more personality (on top of choosing the color) to everyone's mp3 player and give creative another edge over apple! Just put "signed" if you agree and maybe a small passage if you want!
Own: Creative Zen Micro 5gb Black
SIGNED!
Good idea seeing that it is oready incorporated in media source!n and asked me for fights and started taking the mick out of my sister! i still ignored them yes.gif! I got in a fight with 3 lads whilst i was playing tennis with an and asked me for fights and started taking the mick out of my sister! i still ignored them yes.gif! I got in a fight with 3 lads whilst i was playing tennis with a
Similar Messages
-
Communication Error - Yes I know this has been made.
As stated previously, I know these have been made before, by a lot of people. I have yet to find an answer that works. I have tried setting up new locations like the youtube video. I have tried to open said ports, and I have tried turning on UpNP and all of the other tricks. I still cannot get video chat to work. I will do my best to provide all info that I can to get this to work.
Obviously, this is the dreaded Communication Error, "You did not recieve a response from [name here]"
Current Specs:
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Using Mac OS X 10.5.3
Router is a D-Link DI-624M.
This is all updated with firmware and is current (v2.5). Any help would be greatly appreciated, thank you.Routers
The table below lists common household routers qualified for use with iChat AV. No additional configuration or port forwarding is required. There are two assumptions for using one of the listed routers:
1. There is only one router between your computer and your Internet service provider. If you are on a complex network, ask your network administrator about any routing issues.
2. That a firewall has not been enabled on the sending or receiving end of the iChat AV conference. Optional firewall features on routers may block ports, as may firewall software used on computers. See technical document 93208, "iChat AV: Ports That Need to Be Open Behind Firewalls".
Of course Port Forwarding says this
http://portforward.com/english/routers/port_forwarding/Dlink/DI-624/iChat.htm
For Pics where the firewall access is
http://portforward.com/english/routers/portforwarding/Dlink/DI-624/AIMTalk.htm
It will be worth checking if Ports need to be open to be allowed though the firewall.
9:53 PM Thursday; June 26, 2008 -
How do I restart my itunes if I didn't complete new update? I keep getting an error code R6034 An application has made an attempt to load the C runtime library incorrectly.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
unable get my iphone to be reconized hs being factory unlock by itunes
No shop can officially unlock your iPhone. Only the cell carrier to whom the iPhone is locked can authorize unlocking. Unless this shop is an authorized outlet for the cell carrier, the shop is scamming you.
If they are an authorized outlet for the carrier, contact the cell carrier's customer support, give them the appropriate case/order number for the unlock request, and get them to actually process the unlock. Then follow the carrier's instructions as to how long to wait. They may tell you that there will be an email, or they may just tell you to wait a certain amount of time. Then this will be the procedure:
http://support.apple.com/kb/HT5014
Regards.
Message was edited by: varjak paw -
Really need help with this as i feel scamed
Contact Apple.
Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices) -
My Apple ID email has been deleted, how can I change the email?
I can't remember my security questions :/
You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100131) -
I am getting an alert in my Antivirus for Buffer Overflow whenever I launch or close my Firefox Browser. This has been happening since I upgraded to the Firefox 15. I didn't have this problem before. I having been using Firefox since many years & never faced such an issue. But this new issue has saddened me. Also whenever I close my Firefox browser the process is not getting ended in the Task Manager. When I try to launch again its throwing an alert saying that "the firefox is not responding. You must close the existing firefox process or else restart your system". Please debug this as I have been fellow open-source lover & would be happy if you guys release a fixed update & if no one else should starts facing this issue ever again. Thanks in Advance guys!!!
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/Troubleshooting+plugins -
I have four Macs. I want to download Lion to each. Do I have to buy four copies or just one copy and download it four times. Apologies if this has been asked and answered before!
The best procedure is to download Lion once but don't install immediately.
First, locate & copy the installer - preferably to another drive. Having done that you can then go ahead with the 1st install.
Subsequently copy the installer in turn to each other drive and install as required.
Note: the installer will be automatically deleted at the end of the installation if on the same drive as the new installation.
If you do what several posters have suggested you will be downloading the installer multiple times - which won't cost you as long as you log in to the App Store with the same ID & password. However, It will again take the download time and the install time.
Note also: When you login to install on another drive connected to your 1st Lion installation App Store won't give you the option of another install unless you hold the Option key while clicking on purchases. -
I'm having problems with FlashPlayerPlugin and plugin-container. They keep starting up and bogging down the system. This has been a recent occurrance. I've made sure that I have the latest version. I notice the problem when I am opening some applicatio, and it freezes. If I go to Task Manager, I can see the two Adobe apps sucking up CPU cycles. If I end the processes, then the other apps continue. Today, I uninstalled FlashPlayerPluginqand plugin-container. All day since I have had no freezing of an app. What should I do to correct the problem?
Here's an explanation of what those processes are.
Inside Flash Player Protected Mode for Firefox
I'm curious about what you did to uninstall just those. -
Has Apple made any attempt to fix the 'no deleting apps on iCloud' yet? Would like this feature instead of going to Apple or having to write them to get this feature. What's the point of having an iPad if you can't manage it. You get an app you thought you'd like, but don't & now it's taking up space for another app that could be useful, if not better.
Items showing as in the cloud on app store, do not take up any spce on either your ipad or on your icloud, it is stored in the app store cloud.
The main reason to not delete is it is the history of what you have purchased, you can hide it from view if you would like.
btw,, Apple Feedback Link
http://apple.com/feedback -
How can I see when a transport has been made in an other environement?
Hi,
Is there anywhere in SAP where you can see if a transport as been made in an other environement? I'm trying to figure out if a transport in the DVL environement has been made in the SANDBOX environement. I tried SE10 transaction, but it seems that once the transport has been made in an other environement, it doesn't appear in this transaction anymore.
Thanks, points will be given if helpful.Hi,
Thanks for the transaction code, but my question is not answered yet.
For example, I use STMS_IMPORT in the Development environement to see the list of the transport that has been made in that environement.
I now have a list of these transports, with a status. But I wanna know if that transport that has been created in the Development environement has been moved to the Sandbox environement.
STMS_IMPORT shows me only the list of transports that has been created in that environement. It doesn't tell me if a transport in DVL has been moved in the QAS, SANDBOX or PRODUCTION environment.
Thanks again,
Julien -
Hi, Although I had itunes downloaded on my pc & been using for a while now, today I've been prompted to download itunes again. This has been successfull except that 65 songs that I had previously in my library are now no longer able to play, the message informes me that the original files could not be found. Yet these songs are still on my ipod after being syncronised and I can play them on my ipod. Please advise how I can find the original files on my pc.
Thank you
CarolI would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...
-
So how do I get notified of updates in this forum? As I said: I don't understand the thing you call LIVE BOOKMARKS I have never used them, and most forums I have used notify VIA E-mail not giving out my E-mail address, or other private information when a reply has been made to the thread in question, so how do I get notified of updates in this forum? I have seen no normal options for setting my viewing preferences used for this forum. Thank You.
Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA? -
This 16gb model number is ME179BT/A if that makes any difference. It still plays apps and games with ease but will not download media from either the computer or iTunes store. We have restored and reset the thing but it will not work.
This has been playing up since October. It started with it refusing to switch on/off or do anything so I rebooted it then restored it but it didn't download any media. We have tried several times since to fix the issue but it just won't work.
If anyone has any ideas please let me know as the uncertainty of this device is killing me. What has happened to Apple??? We have all had Apple devices for over a decade but suddenly the whole thing has gone mad, constant updates and need to buy newer devices...... I think Samsung may be the better option the way rhis is going? We were always happy to pay the premium for the assurance of quality but that is no longer the case!
Please let me know if there is anything to be done with this so called media player??
Thank-you.Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H. -
ReportServer intengration error - An attempt has been made to use a data extension 'ADS'
For a moment I thought I had the perfect SharePoint 2010 installation going until I went and created an Access Database site added some data then went to reports. I am getting the following error.
An error has occurred during report processing. (rsProcessingAborted)
An attempt has been made to use a data extension 'ADS' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)
Other than that, life is good. I have pretty much uninstalled and stuff repeatedly. I'm about to do another uninstall, reinstall because Monitorying isn't showing any errors. Which it should be, but that's another post; should the issue return.
But if anybody has any ideas about the ADS thing I would sure like to hear it.
Thanks!
Oh, the system is the following:
Server 2008 R2 Standard
SQL Server 2008 R2
SharePoint 2010 Release with 2010 October CU updates. I ran the CUs just before running SharePoint Configuration.
At the moment it is all house on the same machine; but if it goes to production then it will be turned in to a two-tier system.OK - seems like we just have to read the manual!
You'll have to install the Reporting Services Add-in for Connected Mode:
A. Modify the C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config file on the Reporting Services server.
Under the <Data> node, under the <Extension> node, add the ADS data extension. For example:
<Extension Name="ADS" Type="Microsoft.Office.Access.Reports.DataProcessing.AdsConnection, Microsoft.Office.Access.Server.DataServer, Version=14.0.0.0, Culture=Neutral, PublicKeyToken=71e9bce111e9429c"/> -->
B. Modify the rssrvpolicy file on RS server.
Add the following XML code in the file under the <NamedPermissionSets> node:
<PermissionSet class="NamedPermissionSet" version="1" Name="ReportExpressionsDefaultPermissionSet">
<IPermission class="SecurityPermission" version="1" Flags="Execution" />
<IPermission class="Microsoft.Office.Access.Server.Security.AccessServicesPermission, Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" version="1.0" Flags="CalculationCallback" />
</PermissionSet>
In the <CodeGroup>node, find the following line and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet”.
For further instructions please see Technet Article: "Using Access Services with SQL Reporting Services: Installing SQL Server 2008 R2 Reporting Services Add-In (SharePoint
Server 2010)".
Kind regards
Thanks for the reply, but for the clarification I found my config files in a different location other than stated in A - C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer
In Step B, the following is unclear to me - In the <CodeGroup>node, find the following line and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet”. There are
MANY Code Group nodes. And in addition to that there are two with PermissionSetName="Execution"; Which one?
While awaiting your reply I'll go look at the docs and see if they are clearer.
Thanks!
Maybe you are looking for
-
Line break on a user defined condition in adobe forms
Dear experts, my problem is as follows: i designed a form with adobe forms with a scheme like this. pos 10 text text2 text3 11 text4 text5 my Problem is now that like breaks occour random. for example: 10 text text2
-
TV@nywhere problem...please help
Hi All, I am trying to install this tv@nywhere Master on a PC133, Socket 370 PIII Amptron MB computer. I am running windows 2000 professional. I can install anyother PCI card and it will detect the card. I install this TV@nywhere PCI card and the s
-
Hi all. I was using Teststand 4.2 up to last week and upgraded to TS 2013. In 4.2 I was using the following to get the location of the teststand report: Runstate.Root.Locals.ReportFilePath but with TS 2013 this no longer works.. is the following erro
-
Ad blocking in Gmail using Pith Helmet
How do i configure Pith Helmet to block the right hand side ads in Gmail.I've tried everything i can think of but it just doesn't work.
-
Duplicated transactions in ST03N transaction profile
Hello. I've found duplicated transactions in the transaction profile list , in ST03N. Does anybody know if this is a bug? This is a 4.6C SAP R/3 system. If not a bug, why the transaction is reported twice with different number of steps, response time