Petition: Programable play mode for MuVo V200 (and posibly othe

I would like to suggest ti include a programable play mode for MuVo V200 (and N200), I mean, a a play mode wich the user could select one-by-one songs on the MuVo and then the MuVo play those songs in the given order.
Creative may implement this by introducing virtual folders, folders that only contains references to the stored songs, so user could use the existing diferent play modes over those folders.
I think there's no technical reason that avoids this feature, but I know it may be not simple.
Thanks.
PD: Oh, of course I suggest Ogg Vorbis support, I don't care if my battery stands half time (WMV do it also, but no so hard), but I know Creative don't like Ogg Vorbis

The MuVo's don't have rescue mode, except for the MuVo?.

Similar Messages

Double installation : muvo v200 and zenmi

Hi ,
I'm new in mp3 player world and i bought one creative player : muvo v200 and installed it correctly;
In a second time i bought a Zen Micro and i wonder if i must install it with CD or simply connect it ?
If i install the Zen micro with cd , the first player muvo v200 will be recognizable as it does ?
And then i can use both players without any problems ?
thanks in advance for answers
Christian

You should always install the software from all your product CDs. Don't worry about double installation. The installation program will know whether to overwrite the files. For example, if the software that came with the Zen Micro is newer, than it will overwrite the same software that came with the MuVo v200. Different product CDs may also install different plugins for your different MP3 players.

My iphone 4 went into recovery mode for some reason and it is unable to be restored. any ideas how to fix this?

my iphone went into recovery mode for some reason and is unable to be restored. it wont turn on and when plugged into a charger it shows a usb and itunes symbol. so i plugged it into my mac and connected to itunes then itunes said it has detected a phone in recovery mode and needs to be restored. so it goes through the restoration process for a couple minutes or so then stops and says itunes is unable to restore because an unknown error occurred (2001) or (2006) and other times i try it says its unable to restore because itunes cant detect the device... any ideas how to fix this?

Errors 2000-2009 (from Apple support): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604. If the issue persists, it may be related to conflicting security software.
2001: Use up to date software. Make sure your device is in DFU Mode: http://www.iclarified.com/entry/index.php?enid=1034
2006: Use a different USB cable. Possibly the one that came with your iPhone.

Iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?

iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?
the iphone 4S has been in recovery mode for a long time and i have tried to press and hold the power and home buttons until the apple symbols comes on the screen again but it stay on the screen until the screen turns off and doesn't come back on to the home screen and have tried to sync with mac and doesn't do anything it does display the itunes and cable icons for a while but then goes back to the apple symbol and doers nothing what can I do to fix this and not loose what is on the phone at all?

Hi, simonRM.
Thank you for visiting Apple Support Communities.
I understand that you are unable to restore your iPhone. Here are the best troubleshooting resources to start with when not being able to update or restore your iPhone.
If you can't update or restore your iPhone, iPad, or iPod touch
Resolve iOS update and restore errors in iTunes
-Jason H.

Diffrence between Muvo V200 and TX

Hi.
Is there any significant diffrence between V200 and TX FM? I've looked the information about them in the web site, but I can't see them as two separate players (except that TX FM looks nicer). They seem to be about the same size and weight, and they seem to have same features as well.
Does anyone have experiences or just knowledge about these players?

Somehow my reply got lost. Here again - perhaps now twice.
Don't missunderstand my comment. The differences in sound quality are really minimal. But on the other hand the specifications point to better values at the TX FM too. But again - it took me one hour switching and listening to come to a verdict.
I read here about this problem with the light and the high sound and tried to check this on my player. Perhaps my ears are not so good but I could not hear anything - have the latest firmware. But don't blame me - I just tell you honestly how it is with my player. I just tried again - I cannot hear this sound and I have two players (one for my girlfriend). Perhaps I have a later model or really bad ears... Creative mentioned this problem here themselves - perhaps they fixed it in the meantime.
What I do not like so much is the switch between music play and radio. Without looking and switching in the menue this is not possible. In addition to this I do not like the volume switch - I would prefer a wheel instead of the buttons. I think it is a good idea to have earphones with volume control if you did not normalize all your songs.
So far I had no problems with both players. Work great with my OS Win98SE. The included Creative Media Source Software is a bit on the weak side. But at least you can even rip to WMA format without any problems - variable and fixed bit rates possible.
I really would recommend to go to the bigger memory size. At first a bought the 256. But I saw pretty quick that this is really a bit tight. And so my girlfriend has this now and I have the 52. And if you want to use high bit-rates check out the GB. I never saw it and have no glue how much more it might be. But on the other hand you might get in the price range of the HD based players. And there you can rip in WAV. Much better than MP3 or WMA. But never buy one with akku. You might have to replace the player to replace the akku - mostly. And avoid USB only charger. It is a bit boring to be somewhere without USB charging possiblity. And most places are like this ;-)

Is there a program that is for taking notes and summaries?

i am writing notes and summaries for my exams and am wondering if there is a program that specialises in it
atm for my exams i am using microsoft word but have heard there maybe programs
i think i have heard of something called 'evernote' or something
is there anything??

Tons. Look on the App Store or at MacUpdate or CNET Downloads

HT5624 when I turn my iMassage on it will go to activation mode for along time and then fails Whats teh problem ?!!

when I turn my iMassage on, it will go to activation mode for a long time and then fails. Whats the problem ?!!

Do you have a texting plan and are you connected to data when you try to activate? Check this support document for trouble with activating iMessage. http://support.apple.com/kb/TS4268

Hi there, I can't install Photoshop CC on my computer. The pop-up message directs me to press "Retry" every time I try to install the program. Thanks for your time and consideration!

Hi there, I can't install Photoshop CC on my computer. The pop-up message directs me to press "Retry" every time I try to install the program. I'm a bit unsure of what to do from here. Any help is appreciated!
Thanks for your time and consideration!

YOu have not provided any system info or other technical details, so we can't know.
Mylenium

BIOS Collection(modded) for Socket A and Socket 754

Modded BIOS Use At your own Risk!
MSI K7N2 Delta 2 LSR/FSR/Platinum:
Recommended BIOS:
Download B72c
password for instalation is "T9-246ED", enter it when asked. instruction is included due instalation. after simple extraction proceed as regular BIOS flash.
do not forget to Enable APIC in BIOS its disabled by default..
If B72c isnt fit well(work well) that depend of your memory here B62 mod which your memory should work fine if B72c refuse:
<a href="http://www.ukshazam.com/download/bosskiller/W6570NMS B.62.rar">Download B62[/url]
Latest Version Beta by MSI named also B72(newest release):
Download B72 Latest MSI Beta, Floppy Image
Download B72 Latest MSI Beta, flash util and BIOS only
B62 and B72c information and discuss here: https://forum-en.msi.com/index.php?topic=84715.0
MSI K7N2 Delta ILSR:
Info:
MSI K7N2 Delta ILSR Modded BIOS based on Official v. 7.80 BIOS
Version History:
version 1.1 add-on
- Added Mobile Barton Support
- Added full RAID support and latest firmware for Fastrack 376
- Add Cpu Vcore selection to 1.85(original was 1.80)
- ICPA Function Activated
- CAS Latency Auto Option added
- Super Stability Option Activated, can be turned off.
- Small EPA Logo Added
- CPU Internal Cache can be enabled/disabled
- Power Status Led Activated
- Reset Configuration Data Activated
- Added Shutdown Temperature
- Added DRAM 2.8Vcore
ver 1.0 add-on
Description:
- Add Halt On Error option
- Fix problem where some hard drives are sometimes not detected
- Better Stability and perfomance improvement
<a href="http://www.ukshazam.com/download/bosskiller/k7n2deltaILSR mod.7.80 F RAID + CPU VCORE.rar">Download 7.8 mod[/url]
MSI K8N Neo3 F:
Info:
BIOS has the PCI and SATA lock which is restoring OC potencial.
Minor USB problem fixed.
Added 183 Memory Devider.
Download 183 mod

temp link for:
MSIP965 Neo BIOS ver. 1.62(Date: 08/30/06) :
http://rapidshare.de/files/33337455/7235v162.rar.html
MSIP965 Neo BIOS ver. 1.67(Date: 09/08/06) :
http://rapidshare.de/files/34366659/7235v167.rar.html
MSIP965 Neo BIOS ver: 16A(Date: 10/17/06)
MSIK8N Diamond Plus BIOS ver. 1.33:
http://rapidshare.de/files/35454120/K8NDP133.exe.html
MSIK8N Diamond Plus BIOS ver. 1.00:
http://rapidshare.de/files/35711075/K8NDP100.exe.html
MSIP965 Platinum(ID 7238):
BIOS ver. 1.22 (Date: 10/24/06)
MSIP965 Neo BIOS ver. 1.67(Date: 09/08/06) :
http://rapidshare.de/files/34366659/7235v167.rar.html
MSIP965 Neo BIOS ver: 16A(Date: 10/17/06)
MSIK8N Diamond Plus BIOS ver. 1.33:
http://rapidshare.de/files/35454120/K8NDP133.exe.html
MSIK8N Diamond Plus BIOS ver. 1.00:
http://rapidshare.de/files/35711075/K8NDP100.exe.html
MSIK9N Platinum(ID 7250):
BIOS ver. 1.51 (Date: 01/05/07)
MSIP965 Neo BIOS ver. 1.62(Date: 08/30/06) :
http://rapidshare.de/files/33337455/7235v162.rar.html
MSIP965 Neo BIOS ver. 1.67(Date: 09/08/06) :
http://rapidshare.de/files/34366659/7235v167.rar.html
MSIP965 Neo BIOS ver: 16A(Date: 10/17/06)
MSIK8N Diamond Plus BIOS ver. 1.33:
http://rapidshare.de/files/35454120/K8NDP133.exe.html
MSIK8N Diamond Plus BIOS ver. 1.00:
http://rapidshare.de/files/35711075/K8NDP100.exe.html
MSIP965 Platinum(ID 7238):
BIOS ver. 1.22 (Date: 10/24/06)
MSIP965 Neo BIOS ver. 1.67(Date: 09/08/06) :
http://rapidshare.de/files/34366659/7235v167.rar.html
MSIP965 Neo BIOS ver: 16A(Date: 10/17/06)
MSIK8N Diamond Plus BIOS ver. 1.33:
http://rapidshare.de/files/35454120/K8NDP133.exe.html
MSIK8N Diamond Plus BIOS ver. 1.00:
http://rapidshare.de/files/35711075/K8NDP100.exe.html
MSIK9NGM(ID 7252):
BIOS ver. 3.23 (Date: 09/21/06)
temp link for
MSI NX6600GT-VTD128 with temperature monitoring feature unlocked:
BIOS details:
MSI GeForce 6600 GT (VTD) BIOS - Rev 01
Card : MSI GeForce 6600 GT VTD
Chipset : NVIDIA GeForce 6600 GT
Version : 5.43.02.35.07
Memory : 128MB
Download
latest flash program included in archive. how to use:
download and extract file from archive. rename MSI.6600GT.VTD.128MB.Rev.01.rom to more sensitive short DOS name example: NX6600GT.ROM copy all files from extracted folder into your DOS bootable device(USB flash is recommended). reboot machine and boot from corespond device.(boot from your USB Drive)
after booting finished navigate to folder which contain VGA BIOS and your flash program and excute from there:
nvflash_-4_-5_-6_NX6600GT.ROM and press "ENTER" await a few seconds and program will requre confirmation. you will need to press "Y" key to proceed. after that after 10 seconds (CAPS,NUM,SCROLL LOCK will be blinking during update) after compelete procedure should see output message from program: Update complete successfully.
Shutdown PC. await 20 seconds, (to avoid capacitors shock) turned on. you have done.
NOTE: Replace symbol "_"(without quotes) with space in command line.

I have updated to IOS 6, the App store won't work, is stuck in update mode for 1 day and the battery now goes flat in 3 hrs without use. Can I go back to IOS 5?

Hi, I was forced to upgrade to IOS 6 due to a restore.
Since the upgrade, I have lost information, the App store is stuck in update mode, my battery drains in hours and many more problems.
Is there a way to go back to the VERY RELIABLE IOS 5? This phone is nearly useless now.
Thanks

Just FYI - the situation is resolved. I downloaded the new snow leopard 10.6.8 update for safari and now itunes works. I have no idea what that has to do with anything - but I saw it on another forum and it actually worked.

Unable to use debug mode for x64 application and debug doesn't work when target cpu set to x86

I am attempting to familiarize myself with Visual Basic programming in Visual Studio 2008, using the Visual Basic Guided Tour in Microsoft Visual Studio 2008 Documentation, and have run into a bit of a road-block. When following the lesson "It
Doesn't Work! Finding and Eliminating Run-Time Errors", the IDE does not allow me to edit the code when the debugger hits the intentionally programmed runtime error (divisor set to 0). It gives me an error that "Changes to 64 bit applications
are not allowed". I found some forum postings advising to set the project's Target CPU from "Any CPU" to "x86". However, when I do that, and re-execute the debug process, the debug fails to stop on the overflow/divide by
zero error.
How can I debug my programs when Any CPU/x64 target doesn't allow me to edit the code, and x86 target doesn't appear to recognize obvious runtime errors.

Hi Tim,
>>the IDE does not allow me to edit the code when the debugger hits the intentionally programmed runtime error (divisor set to 0). It gives me an error that "Changes to 64 bit applications are not allowed".
I'm afraid that the VS2008 has a limitation for this feature, I mean that Edit and Continue isn't supported on 64-bit.
Reference:
http://stackoverflow.com/questions/1498464/changes-to-64-bit-applications-are-not-allowed-when-debugging-in-visual-studio
http://blogs.msdn.com/b/habibh/archive/2009/10/12/how-to-edit-code-when-debugging-a-64-bit-application.aspx
But this feature has a improvement in VS2013 now:
http://blogs.msdn.com/b/visualstudioalm/archive/2013/06/26/debugging-support-for-64-bit-edit-and-continue-in-visual-studio-2013.aspx
So if possible, you could test it in the latest VS2013 version.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Pdf form in read-mode for the users and...allowing me to save my new modifications

I wanted to save a modification in my pdf form. Unfortunally, it was opened by another user in read-only mode.
When I tried to save my new modifications, my screen pops me up the classic error message: cannot not save because it is opened in read....
The form is stored in network shared drive and I am the owner. The users have the read only permission.
I open it with Acrobat Pro X and users open it with Adobe Reader XI. Both sofwares are setted with the enable protected mode and javascript disabled,
I tried to not use the preview mode in Windows explorer without succes.
Is my problem a bug or is it the normal way abobe acrobat works ?
Thank you for any replyer !

Hello Gkaiseril,
Thank you for your fast reply !
I am not at my office right now, however I am pretty sure in the Word case, I will be able to edit.
During my problem, I checked in the File manager on the server side (windows 2003 r2 sp1 x64). The reader had not write permission on the file, and I am the only owner with the full permissions.

Awsome mod for muvo tx or nx ser

<img src=http://img400.imageshack.us/img400/4489/img0002pj.jpg> <img src=http://img400.imageshack.us/img400/3422/img0028zj.jpg> i made this mod and it allows me to run my muvo txfm on 4 AA batteries. i have more pix if you want themMessage Edited by rooneyruby on 08-29-2005 05:25 AMMessage Edited by rooneyruby on 08-29-2005 05:27 AM

Four AA batteries is overkill. It would be nice to have a battery case that attaches directly to the player that holds one AA battery.
A AA battery holds 2.5 times as much power as a AAA, but the AAA is often more expensi've than a AA battery. The AA would give
2.5 times the playtime. So I guess that might mean 40 hours vs 6 hours?

JMF does not play sound for .avi file and no video for .mov file

Hi,
I am trying to use JMStudio to transmit media files from one computer to another.
However, when I try to transmit .mov file it only plays audio no video is displayed on other computer.
And when I transmit .avi file I can see the Video on other machine but it does not
play any sound.
I tried using capture devices like - webcam and mic and they work perfectly fine.
Can anyone please tell me the solution for this.
Thank you in advance.

I discovered the same problem too..
I think it is a general Format problem.
When i analyzed the tracks in my .avi and .mov files before rtp streaming with jmf, I found each media containing just 1 track..
This track was a video track, no audio at all.
Other formats I tried, like .mpg, revealed both audio and video tracks, and performed perfectly.
I'm still on more research.. will get the solution to you if u don't find one before I'm done..

Stereo speakers mod for ALL apps and sounds

Hi Sony Community,
I want ask you if there is a mod without root to use the speakers of my Xperia Z2 on stereo for ALL apps, calls and sounds (system and not system).
I found very bad that Sony hasn't optimize Android 5 with this feature because the speakers of Xperia Z2 are very beautiful and functional, better than Z3, but without stereo output are very limited and reduce the potential of this smartphone!
The stereo front speakers of Xperia are one of the GREAT and BEST design features against ALL Samsung and Apple devices, so I don't understand why Sony use they on stereo to give us a powerful and especially COMPLETE sound output
I hope in a future implemention of this setting into next firmware update, but now I will very haapy if there is a sostitutive mod to force to use speakers o stereo for ALL.
Every answers are welcome to me!
Cheers
Solved!
Go to Solution.

No problem.. It's as safe as any modification of software I guess. I have never had any issues, but yes I'm sure just rooting the device will not lose your drm keys. You only lose drm keys when unlocking the bootloader which I do not feel comfortable doing.
There's a full tutorial on XDA on how to do this. To sum it up, you pretty much have to downgrade in order to root and have custom recovery, then flash a pre-rooted stock rom. This will give you 100% stock experience, but with root added. Then you can choose which mods, etc you like to flash like the one mentioned above.
It doesn't require too much knowledge, and isn't too complicated, but I'd still recommend reading up on it a lot before doing it, just in case anything happens. I always make sure I read instructions in full at least 3 or 4 times to feel comfortable.

Petition: Programable play mode for MuVo V200 (and posibly othe

Similar Messages

Maybe you are looking for