Petstore1.3 "setup deploy" failure
I'm trying to install Petstore1.3 on my Windows98 machine with jdk1.3.1 and j2sdkee1.3. However the command "setup deploy" failed with the error message:
[java] Sender object Deploytool (Main): Could not connect to localhost
I'm trying to install Petstore1.3 on my Windows98
machine with jdk1.3.1 and j2sdkee1.3. However the
command "setup deploy" failed with the error message:
[java] Sender object Deploytool (Main): Could not
connect to localhost
If you changed the port number in orb.properties, you need to do the same in setup.xml.
Similar Messages
-
Hi folks,
I am a newbie to J2EE. I downloaded Petstore1.3 and installed it on
my W2K. According to the instructions, I ran setup, then launched
cloudscape database and j2ee server, and ran "setup deploy", and then
restarted cloudscape and j2ee. But when I tried to access
http://localhost:8000/petstore/, it said that the resource wasn't available.
It seems to me that the environment varibles JAVA_HOME and J2EE_HOME
have been set correctly. And I was able to run a couple of servlets.
Thanks in advance for your help!I got the same problem. I followed the intallation step in the doc.
but when I run "setup deploy", I got following message:
deploy:
[echo] Deploying ears ....
[java] java.lang.SecurityException: sealing violation
[java] at java.net.URLClassLoader.defineClass(URLClassLoader.java:234)
[java] at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
[java] at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
[java] at java.security.AccessController.doPrivileged(Native Method)
[java] at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
[java] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
[java] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
[java] at com.sun.enterprise.deployment.xml.XMLValidationHandler.Init(XMLValidationHandler.
java:50)
[java] at com.sun.enterprise.deployment.xml.XMLValidationHandler.<init>(XMLValidationHandle
r.java:38)
[java] at com.sun.enterprise.deployment.ApplicationArchivist.getApplicationName(Application
Archivist.java:1720)
[java] at com.sun.enterprise.tools.deployment.main.Main.main(Main.java:155)
[java] Deploy the application in petstore.ear on the server localhost saving the client jar as
null
[java] Sender object Deploy Tool : Deploy null on localhost
[java] Remote message: Contacted Server....
[java] Remote message: Application null transferred.
[java] Sender object Deploytool (Main) : RemoteException occurred in server thread; nested exce
ption is:
[java] java.rmi.RemoteException: Error saving/opening
[java] Java Result: 1
[java] java.lang.SecurityException: sealing violation
[java] at java.net.URLClassLoader.defineClass(URLClassLoader.java:234)
[java] at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
[java] at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
[java] at java.security.AccessController.doPrivileged(Native Method)
[java] at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
[java] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
[java] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
[java] at com.sun.enterprise.deployment.xml.XMLValidationHandler.Init(XMLValidationHandler.
java:50)
[java] at com.sun.enterprise.deployment.xml.XMLValidationHandler.<init>(XMLValidationHandle
r.java:38)
[java] at com.sun.enterprise.deployment.ApplicationArchivist.getApplicationName(Application
Archivist.java:1720)
[java] at com.sun.enterprise.tools.deployment.main.Main.main(Main.java:155)
[java] Deploy the application in opc.ear on the server localhost saving the client jar as null
[java] Sender object Deploy Tool : Deploy null on localhost
[java] Remote message: Contacted Server....
[java] Remote message: Application null transferred.
[java] Sender object Deploytool (Main) : RemoteException occurred in server thread; nested exce
ption is:
[java] java.rmi.RemoteException: Error saving/opening
[java] Java Result: 1
[java] java.lang.SecurityException: sealing violation
[java] at java.net.URLClassLoader.defineClass(URLClassLoader.java:234)
[java] at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
[java] at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
[java] at java.security.AccessController.doPrivileged(Native Method)
[java] at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
[java] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
[java] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
[java] at com.sun.enterprise.deployment.xml.XMLValidationHandler.Init(XMLValidationHandler.
java:50)
[java] at com.sun.enterprise.deployment.xml.XMLValidationHandler.<init>(XMLValidationHandle
r.java:38)
[java] at com.sun.enterprise.deployment.ApplicationArchivist.getApplicationName(Application
Archivist.java:1720)
[java] at com.sun.enterprise.tools.deployment.main.Main.main(Main.java:155)
[java] Deploy the application in supplier.ear on the server localhost saving the client jar as
null
[java] Sender object Deploy Tool : Deploy null on localhost
[java] Remote message: Contacted Server....
[java] Remote message: Application null transferred.
[java] Sender object Deploytool (Main) : RemoteException occurred in server thread; nested exce
ption is:
[java] java.rmi.RemoteException: Error saving/opening
[java] Java Result: 1
[java] java.lang.SecurityException: sealing violation
[java] at java.net.URLClassLoader.defineClass(URLClassLoader.java:234)
[java] at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
[java] at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
[java] at java.security.AccessController.doPrivileged(Native Method)
[java] at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
[java] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
[java] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
[java] at com.sun.enterprise.deployment.xml.XMLValidationHandler.Init(XMLValidationHandler.
java:50)
[java] at com.sun.enterprise.deployment.xml.XMLValidationHandler.<init>(XMLValidationHandle
r.java:38)
[java] at com.sun.enterprise.deployment.ApplicationArchivist.getApplicationName(Application
Archivist.java:1720)
[java] at com.sun.enterprise.tools.deployment.main.Main.main(Main.java:155)
[java] Deploy the application in petstoreadmin.ear on the server localhost saving the client ja
r as null
[java] Sender object Deploy Tool : Deploy null on localhost
[java] Remote message: Contacted Server....
[java] Remote message: Application null transferred.
[java] Sender object Deploytool (Main) : RemoteException occurred in server thread; nested exce
ption is:
[java] java.rmi.RemoteException: Error saving/opening
[java] Java Result: 1
[echo] The petstore application is now installed.
[echo] Please restart your cloudscape database and the J2EE server, and then point your browser
to http://localhost:8000/petstore to access petstore.
BUILD SUCCESSFUL
Total time: 13 seconds
I do not know what is wrong with the deployment?
Can anybody here give me some hint?
Thanks! -
Standalone WLS server instance deployment failure - missing ADFLogger
I was hoping somebody could help me please with issues of installing ADF JDev 11g apps to separate WLS server instances (ie. not Admin Server) and the ADFLogger class.
I've successfully configured a separate standalone WLS, installed the ADF Runtime Libraries and deployed/run an ADF JDev 11g app to the server under the default AdminServer.
We encountered one issue with deployment regarding the ADFApplicationLifecycleListener class which is addessed in the following forum post with the documented workaround of removing ADFApplicationLifecycleListener from the weblogic-application.xml file: Standalone WLS deployment failure - incorrect weblogic-application.xml
Next we want to deploy to a separate server instance/machine on the standalone WLS (we have the eventual requirement of deploying our apps to a WLS cluster, so we're experimenting with configuring separate WLS server instances+machines).
I've created via the Admin Server a new separate server instance (say ADFServer) on a separate WLS machine (say ADFMachine) within my standalone WLS. I've configured the separate WLS server instance to run on a different port from the default Admin Server port. In addition for the 3 deployed libraries jsf, jstl and oracle.adf.domain, via selecting them in the Admin Console under Deployments, then the Target tab, I've also "targetted" (read: deployed) these 3 libraries to the new server instance so they reside both on the Admin Server and ADFServer.
However when I redeploy my original application via JDeveloper's Application Menu -> Deploy option, on deployment to the ADFServer directly I receive the exception at the bottom of this post. The relevant error message:
java.lang.NoClassDefFoundError: oracle/adf/share/logging/ADFLogger
This class is included in numerous ADF Runtime Libraries, and I would expect that once I targetted the oracle.adf.domain library for both Admin Server and ADFServer, the relevant ADFLogger class should be available (and given the fact I've run the application successfully on the standalone WLS under the Admin Server, it proves the library is available).
The missing ADFLogger library seems to be a reoccuring theme for application server deployments, in particular OC4J. This is the first time I've seen it broached for WLS when using the ADF Runtime Libraries and haven't found much assistance via the OTN forums, Google searches etc.
Does anybody know what I've configured incorrectly on my standalone WLS such that the ADFLogger is not configured for the separate WLS server instance? (I suspect I'll have to try the WLS forum too, but lets start here).
Any help appreciated.
Thanks & regards,
CM.
(Complete stack trace)
Failure occurred in the execution of deployment request with ID '1229647798124' for task '2'. Error is: 'java.lang.NoClassDefFoundError: oracle/adf/share/logging/ADFLogger' java.lang.NoClassDefFoundError: oracle/adf/share/logging/ADFLogger at java.lang.Class.getDeclaredFields0(Native Method) at java.lang.Class.privateGetDeclaredFields(Class.java:2291) at java.lang.Class.getDeclaredFields(Class.java:1743) at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:965) at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:958) at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.processJ2eeAnnotations(BaseJ2eeAnnotationProcessor.java:97) at weblogic.j2ee.dd.xml.J2eeAnnotationProcessor.processJ2eeAnnotations(J2eeAnnotationProcessor.java:37) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processFilters(WebAnnotationProcessorImpl.java:241) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processJ2eeAnnotations(WebAnnotationProcessorImpl.java:212) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processAnnotations(WebAnnotationProcessorImpl.java:107) at weblogic.servlet.internal.WebAppServletContext.processAnnotations(WebAppServletContext.java:1287) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:412) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:456) at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:414) at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:910) at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:364) at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:388) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:44) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:616) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191) at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:198) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:725) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) java.lang.NoClassDefFoundError: oracle/adf/share/logging/ADFLogger at java.lang.Class.getDeclaredFields0(Native Method) at java.lang.Class.privateGetDeclaredFields(Class.java:2291) at java.lang.Class.getDeclaredFields(Class.java:1743) at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:965) at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:958) at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.processJ2eeAnnotations(BaseJ2eeAnnotationProcessor.java:97) at weblogic.j2ee.dd.xml.J2eeAnnotationProcessor.processJ2eeAnnotations(J2eeAnnotationProcessor.java:37) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processFilters(WebAnnotationProcessorImpl.java:241) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processJ2eeAnnotations(WebAnnotationProcessorImpl.java:212) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processAnnotations(WebAnnotationProcessorImpl.java:107) at weblogic.servlet.internal.WebAppServletContext.processAnnotations(WebAppServletContext.java:1287) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:412) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:456) at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:414) at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:910) at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:364) at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:388) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:44) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:616) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191) at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:198) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:725) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)I do start it by commandline since I only have the AdminServer, and no other nodes. Below is my startWeblogic.sh and setDomainEnv.sh scripts under medrec/bin directory. I don't see any modifications to them for ADF. Also, after extending the domain, the oracle.adf.domain library shows up in my deployments page and is pointing to "/ u01/ app/ oracle/ product/ wls/ jdeveloper/ modules/ oracle. adf. model_11. 1. 1/ adf. oracle. domain. ear". It seems like the extending step is missing a step to give access to all the libraries?
STARTWEBLOGIC.SH:
#!/bin/sh
# WARNING: This file is created by the Configuration Wizard.
# Any changes to this script may be lost when adding extensions to this configuration.
# --- Start Functions ---
stopAll()
# We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services
if [ "X${ALREADY_STOPPED}" != "X" ] ; then
exit
fi
# STOP POINTBASE (only if we started it)
if [ "${POINTBASE_FLAG}" = "true" ] ; then
echo "Stopping PointBase server..."
${WL_HOME}/common/bin/stopPointBase.sh -port=${POINTBASE_PORT} -name=${POINTBASE_DBNAME} >"${DOMAIN_HOME}/pointbaseShutdown.log" 2>&1
echo "PointBase server stopped."
fi
ALREADY_STOPPED="true"
# Restore IP configuration the node manager starts IP Migration
if [ "${SERVER_IP}" != "" ] ; then
${WL_HOME}/common/bin/wlsifconfig.sh -removeif "${IFNAME}" "${SERVER_IP}"
fi
# --- End Functions ---
# This script is used to start WebLogic Server for this domain.
# To create your own start script for your domain, you can initialize the
# environment by calling @USERDOMAINHOME/setDomainEnv.
# setDomainEnv initializes or calls commEnv to initialize the following variables:
# BEA_HOME - The BEA home directory of your WebLogic installation.
# JAVA_HOME - Location of the version of Java used to start WebLogic
# Server.
# JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)
# PATH - JDK and WebLogic directories are added to system path.
# WEBLOGIC_CLASSPATH
# - Classpath needed to start WebLogic Server.
# PATCH_CLASSPATH - Classpath used for patches
# PATCH_LIBPATH - Library path used for patches
# PATCH_PATH - Path used for patches
# WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch
# JAVA_VM - The java arg specifying the VM to run. (i.e.
# - server, -hotspot, etc.)
# USER_MEM_ARGS - The variable to override the standard memory arguments
# passed to java.
# PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
# POINTBASE_HOME - Point Base home directory.
# POINTBASE_CLASSPATH
# - Classpath needed to start PointBase.
# Other variables used in this script include:
# SERVER_NAME - Name of the weblogic server.
# JAVA_OPTIONS - Java command-line options for running the server. (These
# will be tagged on to the end of the JAVA_VM and
# MEM_ARGS)
# For additional information, refer to the WebLogic Server Administration
# Console Online Help(http://e-docs.bea.com/wls/docs103/ConsoleHelp/startstop.html).
# Call setDomainEnv here.
DOMAIN_HOME="/u01/app/oracle/product/wls/wlserver_10.3/samples/domains/medrec"
. ${DOMAIN_HOME}/bin/setDomainEnv.sh $*
SAVE_JAVA_OPTIONS="${JAVA_OPTIONS}"
SAVE_CLASSPATH="${CLASSPATH}"
# Start PointBase
PB_DEBUG_LEVEL="3"
if [ "${POINTBASE_FLAG}" = "true" ] ; then
${WL_HOME}/common/bin/startPointBase.sh -port=${POINTBASE_PORT} -debug=${PB_DEBUG_LEVEL} -console=false -background=true -ini=${DOMAIN_HOME}/pointbase.ini >"${DOMAIN_HOME}/pointbase.log" 2>&1
fi
JAVA_OPTIONS="${SAVE_JAVA_OPTIONS}"
SAVE_JAVA_OPTIONS=""
CLASSPATH="${SAVE_CLASSPATH}"
SAVE_CLASSPATH=""
trap 'stopAll' 1 2 3 15
if [ "${PRODUCTION_MODE}" = "true" ] ; then
WLS_DISPLAY_MODE="Production"
else
WLS_DISPLAY_MODE="Development"
fi
if [ "${WLS_USER}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.username=${WLS_USER}"
fi
if [ "${WLS_PW}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.password=${WLS_PW}"
fi
CLASSPATH="${CLASSPATH}${CLASSPATHSEP}${MEDREC_WEBLOGIC_CLASSPATH}"
echo "."
echo "."
echo "JAVA Memory arguments: ${MEM_ARGS}"
echo "."
echo "WLS Start Mode=${WLS_DISPLAY_MODE}"
echo "."
echo "CLASSPATH=${CLASSPATH}"
echo "."
echo "PATH=${PATH}"
echo "."
echo "***************************************************"
echo "* To start WebLogic Server, use a username and *"
echo "* password assigned to an admin-level user. For *"
echo "* server administration, use the WebLogic Server *"
echo "* console at http://hostname:port/console *"
echo "***************************************************"
# Set up IP Migration related variables.
# Set interface name.
if [ "${Interface}" != "" ] ; then
IFNAME="${Interface}"
else
IFNAME=""
fi
# Set IP Mask.
if [ "${NetMask}" != "" ] ; then
IPMASK="${NetMask}"
else
IPMASK=""
fi
# Perform IP Migration if SERVER_IP is set by node manager.
if [ "${SERVER_IP}" != "" ] ; then
${WL_HOME}/common/bin/wlsifconfig.sh -addif "${IFNAME}" "${SERVER_IP}" "${IPMASK}"
fi
# START WEBLOGIC
echo "starting weblogic with Java version:"
${JAVA_HOME}/bin/java ${JAVA_VM} -version
if [ "${WLS_REDIRECT_LOG}" = "" ] ; then
echo "Starting WLS with line:"
echo "${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS}"
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS}
else
echo "Redirecting output from WLS window to ${WLS_REDIRECT_LOG}"
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS} >"${WLS_REDIRECT_LOG}" 2>&1
fi
stopAll
popd
# Exit this script only if we have been told to exit.
if [ "${doExitFlag}" = "true" ] ; then
exit
fi
SETDOMAINENV.SH:
#!/bin/sh
# WARNING: This file is created by the Configuration Wizard.
# Any changes to this script may be lost when adding extensions to this configuration.
# --- Start Functions ---
BP=100
SP=$BP
pushd()
if [ -z "$1" ]
then
return
fi
SP=`expr $SP - 1`
eval _stack$SP=`pwd`
cd $1
return
popd()
if [ $SP -eq $BP ]
then
return
fi
eval cd \${_stack$SP}
SP=`expr $SP + 1`
return
# --- End Functions ---
# This script is used to setup the needed environment to be able to start Weblogic Server in this domain.
# This script initializes the following variables before calling commEnv to set other variables:
# WL_HOME - The BEA home directory of your WebLogic installation.
# JAVA_VM - The desired Java VM to use. You can set this environment variable before calling
# this script to switch between Sun or BEA or just have the default be set.
# JAVA_HOME - Location of the version of Java used to start WebLogic
# Server. Depends directly on which JAVA_VM value is set by default or by the environment.
# USER_MEM_ARGS - The variable to override the standard memory arguments
# passed to java.
# PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
# DOMAIN_PRODUCTION_MODE
# - The variable that determines whether the workshop related settings like the debugger,
# testconsole or iterativedev should be enabled. ONLY settable using the
# command-line parameter named production
# NOTE: Specifying the production command-line param will force
# the server to start in production mode.
# Other variables used in this script include:
# SERVER_NAME - Name of the weblogic server.
# JAVA_OPTIONS - Java command-line options for running the server. (These
# will be tagged on to the end of the JAVA_VM and
# MEM_ARGS)
# For additional information, refer to the WebLogic Server Administration
# Console Online Help(http://e-docs.bea.com/wls/docs103/ConsoleHelp/startstop.html).
ORACLE_HOME="/u01/app/oracle/product/wls/jdeveloper"
export ORACLE_HOME
WL_HOME="/u01/app/oracle/product/wls/wlserver_10.3"
export WL_HOME
BEA_JAVA_HOME="/u01/app/oracle/product/wls/jrockit_160_05"
export BEA_JAVA_HOME
SUN_JAVA_HOME="/u01/app/oracle/product/wls/jdk160_05"
export SUN_JAVA_HOME
if [ "${JAVA_VENDOR}" = "BEA" ] ; then
JAVA_HOME="${BEA_JAVA_HOME}"
export JAVA_HOME
else
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
JAVA_HOME="${SUN_JAVA_HOME}"
export JAVA_HOME
else
JAVA_VENDOR="BEA"
export JAVA_VENDOR
JAVA_HOME="/u01/app/oracle/product/wls/jrockit_160_05"
export JAVA_HOME
fi
fi
# We need to reset the value of JAVA_HOME to get it shortened AND
# we can not shorten it above because immediate variable expansion will blank it
JAVA_HOME="${JAVA_HOME}"
export JAVA_HOME
SAMPLES_HOME="${WL_HOME}/samples"
export SAMPLES_HOME
DOMAIN_HOME="/u01/app/oracle/product/wls/wlserver_10.3/samples/domains/medrec"
export DOMAIN_HOME
LONG_DOMAIN_HOME="/u01/app/oracle/product/wls/wlserver_10.3/samples/domains/medrec"
export LONG_DOMAIN_HOME
if [ "${DEBUG_PORT}" = "" ] ; then
DEBUG_PORT="8453"
export DEBUG_PORT
fi
if [ "${SERVER_NAME}" = "" ] ; then
SERVER_NAME="MedRecServer"
export SERVER_NAME
fi
POINTBASE_FLAG="true"
export POINTBASE_FLAG
POINTBASE_PORT="9082"
export POINTBASE_PORT
POINTBASE_DBNAME="medrec"
export POINTBASE_DBNAME
enableHotswapFlag=""
export enableHotswapFlag
PRODUCTION_MODE=""
export PRODUCTION_MODE
doExitFlag="false"
export doExitFlag
verboseLoggingFlag="false"
export verboseLoggingFlag
while [ $# -gt 0 ]
do
case $1 in
nodebug)
debugFlag="false"
export debugFlag
production)
DOMAIN_PRODUCTION_MODE="true"
export DOMAIN_PRODUCTION_MODE
notestconsole)
testConsoleFlag="false"
export testConsoleFlag
noiterativedev)
iterativeDevFlag="false"
export iterativeDevFlag
noLogErrorsToConsole)
logErrorsToConsoleFlag="false"
export logErrorsToConsoleFlag
nopointbase)
POINTBASE_FLAG="false"
export POINTBASE_FLAG
doExit)
doExitFlag="true"
export doExitFlag
noExit)
doExitFlag="false"
export doExitFlag
verbose)
verboseLoggingFlag="true"
export verboseLoggingFlag
enableHotswap)
enableHotswapFlag="-javaagent:${WL_HOME}/server/lib/diagnostics-agent.jar"
export enableHotswapFlag
PROXY_SETTINGS="${PROXY_SETTINGS} $1"
export PROXY_SETTINGS
esac
shift
done
MEM_DEV_ARGS=""
export MEM_DEV_ARGS
if [ "${DOMAIN_PRODUCTION_MODE}" = "true" ] ; then
PRODUCTION_MODE="${DOMAIN_PRODUCTION_MODE}"
export PRODUCTION_MODE
fi
if [ "${PRODUCTION_MODE}" = "true" ] ; then
debugFlag="false"
export debugFlag
testConsoleFlag="false"
export testConsoleFlag
iterativeDevFlag="false"
export iterativeDevFlag
fi
# If you want to override the default Patch Classpath, Library Path and Path for this domain,
# Please uncomment the following lines and add a valid value for the environment variables
# set PATCH_CLASSPATH=[myPatchClasspath] (windows)
# set PATCH_LIBPATH=[myPatchLibpath] (windows)
# set PATCH_PATH=[myPatchPath] (windows)
# PATCH_CLASSPATH=[myPatchClasspath] (unix)
# PATCH_LIBPATH=[myPatchLibpath] (unix)
# PATCH_PATH=[myPatchPath] (unix)
. ${WL_HOME}/common/bin/commEnv.sh
WLS_HOME="${WL_HOME}/server"
export WLS_HOME
MEM_ARGS="-Xms256m -Xmx512m"
export MEM_ARGS
MEM_PERM_SIZE="-XX:PermSize=48m"
export MEM_PERM_SIZE
MEM_MAX_PERM_SIZE="-XX:MaxPermSize=128m"
export MEM_MAX_PERM_SIZE
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
if [ "${PRODUCTION_MODE}" = "" ] ; then
MEM_DEV_ARGS="-XX:CompileThreshold=8000 ${MEM_PERM_SIZE} "
export MEM_DEV_ARGS
fi
fi
# Had to have a separate test here BECAUSE of immediate variable expansion on windows
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
MEM_ARGS="${MEM_ARGS} ${MEM_DEV_ARGS} ${MEM_MAX_PERM_SIZE}"
export MEM_ARGS
fi
if [ "${JAVA_VENDOR}" = "HP" ] ; then
MEM_ARGS="${MEM_ARGS} ${MEM_MAX_PERM_SIZE}"
export MEM_ARGS
fi
# IF USER_MEM_ARGS the environment variable is set, use it to override ALL MEM_ARGS values
if [ "${USER_MEM_ARGS}" != "" ] ; then
MEM_ARGS="${USER_MEM_ARGS}"
export MEM_ARGS
fi
JAVA_PROPERTIES="-Dplatform.home=${WL_HOME} -Dwls.home=${WLS_HOME} -Dweblogic.home=${WLS_HOME} "
export JAVA_PROPERTIES
# To use Java Authorization Contract for Containers (JACC) in this domain,
# please uncomment the following section. If there are multiple machines in
# your domain, be sure to edit the setDomainEnv in the associated domain on
# each machine.
# -Djava.security.manager
# -Djava.security.policy=location of weblogic.policy
# -Djavax.security.jacc.policy.provider=weblogic.security.jacc.simpleprovider.SimpleJACCPolicy
# -Djavax.security.jacc.PolicyConfigurationFactory.provider=weblogic.security.jacc.simpleprovider.PolicyConfigurationFactoryImpl
# -Dweblogic.security.jacc.RoleMapperFactory.provider=weblogic.security.jacc.simpleprovider.RoleMapperFactoryImpl
EXTRA_JAVA_PROPERTIES="-Ddomain.home=${DOMAIN_HOME} -Doracle.home=${ORACLE_HOME} -Doracle.security.jps.config=${DOMAIN_HOME}/config/oracle/jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol ${EXTRA_JAVA_PROPERTIES}"
export EXTRA_JAVA_PROPERTIES
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${EXTRA_JAVA_PROPERTIES}"
export JAVA_PROPERTIES
ARDIR="${WL_HOME}/server/lib"
export ARDIR
pushd ${LONG_DOMAIN_HOME}
# Clustering support (edit for your cluster!)
if [ "${ADMIN_URL}" = "" ] ; then
# The then part of this block is telling us we are either starting an admin server OR we are non-clustered
CLUSTER_PROPERTIES="-Dweblogic.management.discover=true"
export CLUSTER_PROPERTIES
else
CLUSTER_PROPERTIES="-Dweblogic.management.discover=false -Dweblogic.management.server=${ADMIN_URL}"
export CLUSTER_PROPERTIES
fi
LOG4J_CONFIG_FILE="/u01/app/oracle/product/wls/wlserver_10.3/samples/domains/medrec/log4j.properties"
export LOG4J_CONFIG_FILE
if [ "${LOG4J_CONFIG_FILE}" != "" ] ; then
JAVA_PROPERTIES="${JAVA_PROPERTIES} -Dlog4j.configuration=file:${LOG4J_CONFIG_FILE}"
export JAVA_PROPERTIES
fi
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${CLUSTER_PROPERTIES}"
export JAVA_PROPERTIES
# Clear the pre_classpath here in case an application template wants to set it before the larger pre_classpath is invoked below
PRE_CLASSPATH=""
export PRE_CLASSPATH
PRE_CLASSPATH=""
export PRE_CLASSPATH
JAVA_DEBUG=""
export JAVA_DEBUG
if [ "${debugFlag}" = "true" ] ; then
JAVA_DEBUG="-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=${DEBUG_PORT},server=y,suspend=n -Djava.compiler=NONE"
export JAVA_DEBUG
JAVA_OPTIONS="${JAVA_OPTIONS} ${enableHotswapFlag} -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole..."
export JAVA_OPTIONS
else
JAVA_OPTIONS="${JAVA_OPTIONS} ${enableHotswapFlag} -da"
export JAVA_OPTIONS
fi
if [ ! -d ${JAVA_HOME}/lib ] ; then
echo "The JRE was not found in directory ${JAVA_HOME}. (JAVA_HOME)"
echo "Please edit your environment and set the JAVA_HOME"
echo "variable to point to the root directory of your Java installation."
popd
read _val
exit
fi
if [ "${POINTBASE_FLAG}" = "true" ] ; then
DATABASE_CLASSPATH="${POINTBASE_CLASSPATH}"
export DATABASE_CLASSPATH
else
DATABASE_CLASSPATH="${POINTBASE_CLIENT_CLASSPATH}"
export DATABASE_CLASSPATH
fi
POST_CLASSPATH=""
export POST_CLASSPATH
POST_CLASSPATH="${ORACLE_HOME}/modules/features/adf.share_11.1.1.jar${CLASSPATHSEP}${POST_CLASSPATH}"
export POST_CLASSPATH
POST_CLASSPATH=""
export POST_CLASSPATH
POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}${DATABASE_CLASSPATH}${CLASSPATHSEP}${ARDIR}/xqrl.jar"
export POST_CLASSPATH
# PROFILING SUPPORT
JAVA_PROFILE=""
export JAVA_PROFILE
SERVER_CLASS="weblogic.Server"
export SERVER_CLASS
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${WLP_JAVA_PROPERTIES}"
export JAVA_PROPERTIES
JAVA_OPTIONS="${JAVA_OPTIONS} ${JAVA_PROPERTIES} -Dwlw.iterativeDev=${iterativeDevFlag} -Dwlw.testConsole=${testConsoleFlag} -Dwlw.logErrorsToConsole=${logErrorsToConsoleFlag}"
export JAVA_OPTIONS
# -- Setup properties so that we can save stdout and stderr to files
if [ "${WLS_STDOUT_LOG}" != "" ] ; then
echo "Logging WLS stdout to ${WLS_STDOUT_LOG}"
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.Stdout=${WLS_STDOUT_LOG}"
export JAVA_OPTIONS
fi
if [ "${WLS_STDERR_LOG}" != "" ] ; then
echo "Logging WLS stderr to ${WLS_STDERR_LOG}"
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.Stderr=${WLS_STDERR_LOG}"
export JAVA_OPTIONS
fi
# ADD EXTENSIONS TO CLASSPATHS
if [ "${EXT_PRE_CLASSPATH}" != "" ] ; then
PRE_CLASSPATH="${EXT_PRE_CLASSPATH}${CLASSPATHSEP}${PRE_CLASSPATH}"
export PRE_CLASSPATH
fi
if [ "${EXT_POST_CLASSPATH}" != "" ] ; then
POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}${EXT_POST_CLASSPATH}"
export POST_CLASSPATH
fi
if [ "${WEBLOGIC_EXTENSION_DIRS}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.ext.dirs=${WEBLOGIC_EXTENSION_DIRS}"
export JAVA_OPTIONS
fi
JAVA_OPTIONS="${JAVA_OPTIONS}"
export JAVA_OPTIONS
# SET THE CLASSPATH
CLASSPATH="${PRE_CLASSPATH}${CLASSPATHSEP}${WEBLOGIC_CLASSPATH}${CLASSPATHSEP}${POST_CLASSPATH}${CLASSPATHSEP}${WLP_POST_CLASSPATH}"
export CLASSPATH
JAVA_VM="${JAVA_VM} ${JAVA_DEBUG} ${JAVA_PROFILE}"
export JAVA_VM -
OSD deployment failure - smstslog attached
I'm pretty new to SCCM and having issues with a OSD deployment. Current image works fine but have been asked to import some drivers so we can deploy to another model. Model is HP Z200. I have uploaded the drivers into sccm (previously tested
them on the system manually to make sure they work), created a new driver package, setup a wmi query that looks for the model name in the task sequence and then deploys drivers. However the OSD deployment is failing, see log below can anyone help please?
smstslog:
Executing task sequence
OSDSetupHook 09/03/2015 09:21:57
904 (0x0388)
Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".
OSDSetupHook 09/03/2015 09:21:57
904 (0x0388)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
OSDSetupHook
09/03/2015 09:21:57
904 (0x0388)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
OSDSetupHook
09/03/2015 09:21:57
904 (0x0388)
Debug shell is enabled OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
Successfully enabled debug command shell support.
OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
Configuring local administrator account OSDSetupHook
09/03/2015 09:22:03 904 (0x0388)
Re-assign all drive letters...
OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
The drive information which has no drive letter can not be found. No need to re-assign driver letters.
OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
Installing SMS client OSDSetupHook
09/03/2015 09:22:03
904 (0x0388)
Client already installed. OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
Moving logs to SMS client directory
OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
Successfully moved logs to SMS client log directory: C:\WINDOWS\CCM\Logs\SMSTSLog
OSDSetupHook
09/03/2015 09:22:03
904 (0x0388)
Executing task sequence manager bootstrap
OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
Executing command line: "C:\WINDOWS\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:2
OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
==============================[ TSMBootStrap.exe ]==============================
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Command line: "C:\WINDOWS\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:2
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Current OS version is 6.1.7601.1 TSMBootstrap
09/03/2015 09:22:04 1012 (0x03F4)
Logging successfully initialized. TSMBootstrap
09/03/2015 09:22:04
1012 (0x03F4)
Resuming Task Sequence in Full OS
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
We are going in GINA and potentially need to set the authenticator
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
setting the authenticator
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Executing command line: "C:\WINDOWS\CCM\TsProgressUI.exe" /Register:WinPE
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
==========[ TsProgressUI started in process 1260 ]==========
TsProgressUI 09/03/2015 09:22:04
1452 (0x05AC)
Command line: "C:\WINDOWS\CCM\TsProgressUI.exe" /Register:WinPE
TsProgressUI 09/03/2015 09:22:04
1452 (0x05AC)
Registering COM classes
TsProgressUI 09/03/2015 09:22:04
1452 (0x05AC)
sbModulePath = C:\WINDOWS\CCM\TsProgressUI.exe
TsProgressUI 09/03/2015 09:22:04
1452 (0x05AC)
Unregistering class objects
TsProgressUI 09/03/2015 09:22:04
1452 (0x05AC)
Shutdown complete. TsProgressUI
09/03/2015 09:22:04
1452 (0x05AC)
Process completed with exit code 0
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Successfully registered TS Progress UI. TSMBootstrap
09/03/2015 09:22:04
1012 (0x03F4)
No valid network adapter found.
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Starting Task Sequence Manager.
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
executing TS Manager not in full media TSMBootstrap
09/03/2015 09:22:04
1012 (0x03F4)
executing TS Manager in c:\windows\ccm
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Executing command line: "TsManager.exe"
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Successfully intialized Logging for TS Manager. TSManager
09/03/2015 09:22:04
1580 (0x062C)
Commandline: "TsManager.exe"
TSManager 09/03/2015 09:22:04
1580 (0x062C)
/service parameter found at index: -1 TSManager
09/03/2015 09:22:04
1580 (0x062C)
/standalone parameter found at index: -1
TSManager 09/03/2015 09:22:04
1580 (0x062C)
/noclient parameter found at index: -1 TSManager
09/03/2015 09:22:04
1580 (0x062C)
Successfully registered Task Sequencing COM Interface.
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Executing as a standalone exe TSManager
09/03/2015 09:22:04
1580 (0x062C)
Initializing TS Environment
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Opening Task Sequencing Environment TSManager
09/03/2015 09:22:04
1580 (0x062C)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ...
TSManager
09/03/2015 09:22:04
1580 (0x062C)
pwszPath && *pwszPath, HRESULT=80070057 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,228)
TSManager 09/03/2015 09:22:04
1580 (0x062C)
pwszPath && *pwszPath, HRESULT=80070057 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,228)
TSManager 09/03/2015 09:22:04
1580 (0x062C)
pwszPath && *pwszPath, HRESULT=80070057 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,228)
TSManager 09/03/2015 09:22:04
1580 (0x062C)
pwszPath && *pwszPath, HRESULT=80070057 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,228)
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Path variable OSDisk converted from 9D26CD310000401F00000000: to C:
TSManager 09/03/2015 09:22:04
1580 (0x062C)
NOT executing in WinPE
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Compiling Config policy TSManager
09/03/2015 09:22:04
1580 (0x062C)
Compiling config policies...
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Compiling SysHealthConfig policy...
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager
09/03/2015 09:22:04
1580 (0x062C)
::DecompressBuffer(65536)
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Decompression (zlib) succeeded: original size 683, uncompressed size 4652.
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Compiling SoftUpdConfig policy...
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
::DecompressBuffer(65536)
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Decompression (zlib) succeeded: original size 1921, uncompressed size 19242.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Compiling SoftDistClientConfig policy... TSManager
09/03/2015 09:22:05
1580 (0x062C)
Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
::DecompressBuffer(65536)
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Decompression (zlib) succeeded: original size 1329, uncompressed size 13740.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Compiling NAAConfig policy... TSManager
09/03/2015 09:22:05
1580 (0x062C)
Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
::DecompressBuffer(65536)
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Decompression (zlib) succeeded: original size 1403, uncompressed size 8996.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="2"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Compiling RebootSettingsConfig policy...
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
::DecompressBuffer(65536)
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Decompression (zlib) succeeded: original size 432, uncompressed size 1560.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Compiling AppManClientConfig policy...
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
::DecompressBuffer(65536)
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Decompression (zlib) succeeded: original size 983, uncompressed size 6358.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Get Install Directory for SMS Client
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager
09/03/2015 09:22:05
1580 (0x062C)
RequestedConfig policy instance(s) : 424
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D}") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager 09/03/2015 09:22:05
1580 (0x062C)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully
TSManager 09/03/2015 09:22:05
1580 (0x062C)
RequestedConfig policy instance(s) : 0 TSManager
09/03/2015 09:22:05
1580 (0x062C)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully
TSManager
09/03/2015 09:22:05
1580 (0x062C)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager
09/03/2015 09:22:05
1580 (0x062C)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully
TSManager
09/03/2015 09:22:05
1580 (0x062C)
RequestedConfig policy instance(s) : 0 TSManager
09/03/2015 09:22:05
1580 (0x062C)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully
TSManager 09/03/2015 09:22:05
1580 (0x062C)
RequestedConfig policy instance(s) : 9 TSManager
09/03/2015 09:22:05
1580 (0x062C)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully
TSManager
09/03/2015 09:22:05
1580 (0x062C)
RequestedConfig policy instance(s) : 13 TSManager
09/03/2015 09:22:05
1580 (0x062C)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully
TSManager
09/03/2015 09:22:05
1580 (0x062C)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager 09/03/2015 09:22:05
1580 (0x062C)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully
TSManager
09/03/2015 09:22:05
1580 (0x062C)
Total RequestedConfig policy instance(s) : 446 TSManager
09/03/2015 09:22:05
1580 (0x062C)
New/Changed ActualConfig policy instance(s) : 2
TSManager 09/03/2015 09:22:05
1580 (0x062C)
[1] Added/updated setting 'ccm_networkaccessaccount:sitesettingskey=1'.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
[2] Added/updated setting 'ccm_networkaccessaccount:sitesettingskey=2'.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy evaluation initiated
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager
09/03/2015 09:22:05
1580 (0x062C)
Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"'
TSManager
09/03/2015 09:22:05
1580 (0x062C)
Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"'
TSManager
09/03/2015 09:22:05 1580 (0x062C)
Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Query = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Verified policy for instance path 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Query = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Verified policy for instance path 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' compiled in 'root\ccDuplicate, see https://social.technet.microsoft.com/Forums/en-US/ab1fb705-bba9-45ef-a2aa-511a0a98ed28/osd-deployment-failure-smstslog-attached-pl?forum=configmanagerosd.
Torsten Meringer | http://www.mssccmfaq.de -
Report to Show All Machines with ANY Deployment Failures
I need to generate a report, daily, that displays all machines that have
any kind of an deployment failure. This list will then be used to generate tickets for consultants in that area to check on them.
I know I can look at specific deployments and see which machines show up as failed, but I am not seeing a report that shows all machines that have
any kind of a failed deployment. Does one exist, or will I need to create it?you can try this report to list all failed deployments(only for applications but not packages).
select
all
SMS_AppDeploymentAssetDetails.AppName as 'App Name',
CASE WHEN SMS_AppDeploymentAssetDetails.AppStatusType = '1' Then 'Success'
when SMS_AppDeploymentAssetDetails.AppStatusType = '2' Then 'In Progress'
when SMS_AppDeploymentAssetDetails.AppStatusType = '3' Then 'Requirements Not Met'
when SMS_AppDeploymentAssetDetails.AppStatusType = '4' Then 'Unknown'
when SMS_AppDeploymentAssetDetails.AppStatusType = '5' Then 'Error'
else 'Unknown'
End as 'App Status Type',
CASE WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '1' Then 'Compliant'
WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '2' Then 'Non-Compliant'
WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '4' Then 'Error'
WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '6' Then 'Partial Compliance'
else 'Unknown'
End as 'Compliance State',
CASE WHEN SMS_AppDeploymentAssetDetails.DeploymentIntent = '1' Then 'Install'
WHEN SMS_AppDeploymentAssetDetails.DeploymentIntent = '2' Then 'Uninstall'
WHEN SMS_AppDeploymentAssetDetails.DeploymentIntent = '3' Then 'Preflight'
else 'Unknown'
End as 'Deployment Intent',
SMS_AppDeploymentAssetDetails.DTName as 'Deplyoment Type Name',
CASE WHEN SMS_AppDeploymentAssetDetails.InstalledState = '1' Then 'Uninstall'
WHEN SMS_AppDeploymentAssetDetails.InstalledState = '2' Then 'Install'
WHEN SMS_AppDeploymentAssetDetails.InstalledState = '3' Then 'Unknown'
else 'Unknown'
End as 'Installed State',
CASE WHEN SMS_AppDeploymentAssetDetails.IsMachineAssignedToUser = '1' Then 'Yes'
Else 'No'
End as 'Device Assigned to User?',
SMS_AppDeploymentAssetDetails.MachineName as 'Device Name',
CASE WHEN CHARINDEX('\',SMS_AppDeploymentAssetDetails.UserName)>0 THEN SUBSTRING
(SMS_AppDeploymentAssetDetails.UserName,CHARINDEX('\',SMS_AppDeploymentAssetDetails.UserName)+1,255)
ELSE SMS_AppDeploymentAssetDetails.UserName END 'User Name'
from fn_AppDeploymentAssetDetails(1033) AS SMS_AppDeploymentAssetDetails
where SMS_AppDeploymentAssetDetails.AppStatusType = '5'
ORDER BY 1
Original query posted on http://systemcenteradmin.com/?p=67
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr -
Systemd-tmpfiles-setup.service failure
Good evening friends.
I recently made a fresh install of arch linux on my pc and since the first boot up i get this error:
systemd-tmpfiles-setup.service failure
Failded to start create volatile files and directories
When i used "systemctl status" command on it, it said something about unkwnon groups in usr/lib/... somewhere, i can't remember all of it, because after i rebooted and tried the same command, it only said that the process failed, without giving much on details.
What might be the problem here?
Last edited by NotaName (2014-09-14 17:42:37)falconindy wrote:
Just a guess, but I think you might have some unknown groups in usr/lib/... somewhere.
You'll really need to try harder to get the logs. They're still in the journal.
Thanks for the answer.
Well, i'm still working on the log finding part, as i'm not sure where they are supposed to be. I checked the /var/log folder files, but it seems that they are not readable/binary maybe?
P.S. Is this something that i might ignore if i don't find a way to fix it?
Last edited by NotaName (2014-09-14 19:36:47) -
Solaris Deployment Failure for cannot resolve symbol on PersistentContainer
Hello, I'm having trouble diagnosing the following deployment failure.
What are some common causes of this? My server was created using an
Express Integration domain with some custom JMS destinations added
afterwards via the console. I am deploying an application built with
Workshop (straight from workshop). I copied over an application from
Windows to Solaris, deleted the .workshop directory and .beabuild.txt
and rebuilt the application to deploy.
I get this error a few times.
####<Aug 21, 2003 10:48:19 AM EDT> <Info> <EJB> <rhino> <cgServer>
<ExecuteThread: '1' for queue: 'weblogic.kernel.System'> <<WLS Kernel>>
<> <BEA-012033> <Compiling generated EJB classes produced the following
Java compiler output:
/export/data/ident/bea/user_projects/domains/ident1Server.conf/./cgServer/.wlnotdelete/EJBCompilerCache/-7dxi2hv35mro/com/bea/wlwgen/PersistentContainer_3fq3ar_Impl.java:143:
cannot resolve symbol
symbol : class BMPContainerBean$DuplicateKeyRemoteException
location: package bean
perchance you meant 'BMPContainerBean.DuplicateKeyRemoteException'
throws
com.bea.wlw.runtime.core.bean.BMPContainerBean$DuplicateKeyRemoteException
^
1 error
This then causes other errors repeating that the deployment failed (let
me know if you need more to diagnose this):
Exception:weblogic.management.ApplicationException: prepare failed for
.workshop/myApp/EJB/myProc_1trtqtoxcz4uv
Module: .workshop/myApp/EJB/myProc_1trtqtoxcz4uv Error:
Exception preparing module:
EJBModule(.workshop/myApp/EJB/myProc_1trtqtoxcz4uv,status=NEW)
Unable to deploy EJB: .workshop/myApp/EJB/myProc_1trtqtoxcz4uv from
.workshop/myApp/EJB/myProc_1trtqtoxcz4uv:
Compiler failed executable.execBut by default WLS8.1 comes with jdk141_02 ...correct ?
AND what i understand is that...the bug you posted is related to a bug in jdk1.4.2
....correct ??
correct me if i wrong.
-sangita
Steven Ostrowski <[email protected]> wrote:
It looks like this is a bug in the BEA-generated code that is then
compiled by WLS. The generated code was using the Class1$Class2 notation
to reference the class, but since $ is a valid character in the class
name, this does not behave as intended. This used to be a bug in
pre-1.4.2 but is now fixed in 1.4.2 (look at bug 4635044, and this is
also mentioned in the 1.4.2 release notes and the Java Developer forums).
The generated code should be:
com.bea.wlw.runtime.core.bean.BMPContainerBean.DuplicateKeyRemoteException
not
com.bea.wlw.runtime.core.bean.BMPContainerBean$DuplicateKeyRemoteException
Thanks again for the good response. I'll send this in to BEA support.
Steven Ostrowski wrote:
One other thing to add, this was fixed by changing the JAVA_HOME
variable inside of the startWeblogic.sh script. Setting it in workshop
did not change anything.
Steven Ostrowski wrote:
Wow, you hit it right on target! I was using 1.4.2 then tried it on
1.4.1_03 and it deployed fine.
Is this a bug in BEA or in the JDK? In either case, where should I
report this bug?
Thanks again
Rob Woollen wrote:
What version of the JDK are you using? I believe they changed the
inner class naming conventions in 1.4.2, and it's breaking lots of
people.
-- Rob
Steven Ostrowski wrote:
Hello, I'm having trouble diagnosing the following deployment
failure. What are some common causes of this? My server was created
using an Express Integration domain with some custom JMS
destinations added afterwards via the console. I am deploying an
application built with Workshop (straight from workshop). I copied
over an application from Windows to Solaris, deleted the .workshop
directory and .beabuild.txt and rebuilt the application to deploy.
I get this error a few times.
####<Aug 21, 2003 10:48:19 AM EDT> <Info> <EJB> <rhino> <cgServer>
<ExecuteThread: '1' for queue: 'weblogic.kernel.System'> <<WLS
Kernel>> <> <BEA-012033> <Compiling generated EJB classes produced
the following Java compiler output:
/export/data/ident/bea/user_projects/domains/ident1Server.conf/./cgServer/.wlnotdelete/EJBCompilerCache/-7dxi2hv35mro/com/bea/wlwgen/PersistentContainer_3fq3ar_Impl.java:143:
cannot resolve symbol
symbol : class BMPContainerBean$DuplicateKeyRemoteException
location: package bean
perchance you meant 'BMPContainerBean.DuplicateKeyRemoteException'
throws
com.bea.wlw.runtime.core.bean.BMPContainerBean$DuplicateKeyRemoteException
^
1 error
This then causes other errors repeating that the deployment failed
(let me know if you need more to diagnose this):
Exception:weblogic.management.ApplicationException: prepare failed
for .workshop/myApp/EJB/myProc_1trtqtoxcz4uv
Module: .workshop/myApp/EJB/myProc_1trtqtoxcz4uv Error:
Exception preparing module:
EJBModule(.workshop/myApp/EJB/myProc_1trtqtoxcz4uv,status=NEW)
Unable to deploy EJB: .workshop/myApp/EJB/myProc_1trtqtoxcz4uv from
.workshop/myApp/EJB/myProc_1trtqtoxcz4uv:
Compiler failed executable.exec -
Application deployment failure
Hi All,
I am facing an application deployment failure issue for Autocad application. It is mandatory that application downloaded to the client machine should have folder name as AdminImage; however the content is copied under cache folder and hence while installation
it is getting failed.
It is getting installed through script and while installation it automatically created adminimage folder but eventually gets failed.
The source location were the content is like
Complete package-->Autocad-->AdminImage
The content location path given is till
....\Autocad\
Program for uninstall and install
AdminImage\install.vbs and AdminImage\uninstall.vbs
Please suggesthow do you reference to the path adminimage in your script, using pushd?
the datasource for the application is \autocad\ ? -
Hello everyone,
Give you a little background on the hardware/software which we are running to do a Windows 8.1 Deployment, we have an VM of Windows Server 2008 R2 with Windows Deployment Services installed and configured correctly. For the boot image it's a Windows 8.1
WIM and as for the Install Image we have a base image of Win 8.1 with all drivers installed for an HP EliteBook 8540w , we Syspreped and then capture the image using the W2K capture on PXE to capture and upload the image to the server. This is where we first
ran into the problem of connecting to the server and had to inject the lan drivers to have network connectivity. After the image was uploaded to the server, we thought to try and run a deployment of that image on an identical laptop. PXE boot into that Image,
it asks for domain credentials which are accepted it begins the installation process and fails at "Windows installation cannot continue because a required driver could not be installed"?
We just set up client logging on the server and it is useless it just says that the driver is missing, but what driver is missing? There are thousands, which one?
Another forum has this issue: http://social.technet.microsoft.com/Forums/windows/en-US/4cf0b378-09d0-4e0b-bc6e-3d898b668f98/during-deployment-windows-installation-cannot-continue-because-a-required-driver-could-not-be?forum=w8itproinstallHi,
Please first check the solution here:
Error: Windows installation cannot continue because a required driver could not be installed
http://support.brainwaregroup.com/kb/article/AA-00702/0/Error%3A-Windows-installation-cannot-continue-because-a-required-driver-could-not-be-installed.html
Also, please try to find out Setup logs from the client computer, and we can see the details in the Setup log:
If the failure occurs in Windows PE before the disk configuration page of the WDS client is completed, you can find the logs at the
X:\Windows\Panther folder. Use Shift+F10 to open a command prompt, and then change the directory to the location.
If the failure occurs in Windows PE after the disk configuration page of the WDS client is completed, you can find the logs on the local disk volume at the
$Windows.~BT\Sources\Panther folder. The local disk volume is usually the drive
C. Use Shift+F10 to open a command prompt, and then change the directory to the location.
Kate Li
TechNet Community Support -
Deployment Failure - thick image - (5627) dism.exe (MDT 2012 Update 1)
I installed MDT 2012 Update 1 on a new server and was testing it out with our Windows 8 deployment. I captured a thick image which works fine when I boot to Win PE and apply it using dism.
I imported the image into the the deployment share (custom, no setup/sysprep) and created a Custom Task Sequence with just 3 tasks to do a custom format (command line using dism), apply the image (choose specific disk and partition), and restart the computer.
However, when I go through the task sequence, it comes up with some errors and appears that it gets sysprepped again because it prompts me to answer questions that weren't a part of my original sysprep (EULA, adding a new user, etc).
Any idea where I need to look to get this fixed? I've shared the BDD.log and LTIApply.log on my SkyDrive.
https://skydrive.live.com/?cid=0FB4C394CC7A79E1&id=FB4C394CC7A79E1%21105
Here's a snip of the results
<![CDATA[FAILURE (Err): 53: Copy File: C:\MININT\unattend.xml to C:\Windows\Panther\Unattend.xml - File not found
FAILURE ( 5627 ): 2: Run DISM.exe
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Unknown error (Error: 000015FB; Source: Unknown)
Failed to run the action: Install Operating System. Execution has been aborted
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015FB; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]>
Please advise.
Thanks in advance.I installed MDT 2012 Update 1 on a new server and was testing it out with our Windows 8 deployment. I captured a thick image which works fine when I boot to Win PE and apply it using dism.
I imported the image into the the deployment share (custom, no setup/sysprep) and created a Custom Task Sequence with just 3 tasks to do a custom format (command line using dism), apply the image (choose specific disk and partition), and restart the computer.
However, when I go through the task sequence, it comes up with some errors and appears that it gets sysprepped again because it prompts me to answer questions that weren't a part of my original sysprep (EULA, adding a new user, etc).
Any idea where I need to look to get this fixed? I've shared the BDD.log and LTIApply.log on my SkyDrive.
https://skydrive.live.com/?cid=0FB4C394CC7A79E1&id=FB4C394CC7A79E1%21105
Here's a snip of the results
<![CDATA[FAILURE (Err): 53: Copy File: C:\MININT\unattend.xml to C:\Windows\Panther\Unattend.xml - File not found
FAILURE ( 5627 ): 2: Run DISM.exe
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Unknown error (Error: 000015FB; Source: Unknown)
Failed to run the action: Install Operating System. Execution has been aborted
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015FB; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]>
Please advise.
Thanks in advance.
Hi Mathew,
I have the similar error deploying a image (no sysprep) using the standard client task sequence. There are 2 partitions, one 500MB for boot and the other remaining partition is for OS. Do you have solutions to resolve the errors? Greatly appreciate
any advice given. Thanks.
Regards,
Eng Chai
Eng Chai -
[SOLVED]systemd-tmpfiles-setup.service failure
Hi guys,
I just reinstalled arch with the following partitions:
[root@arch_vinnom vinnom]# gdisk -l /dev/sda
GPT fdisk (gdisk) version 1.0.0
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sda: 625142448 sectors, 298.1 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): BD3CA679-FA08-4F60-9BAD-B845DE9FF7EB
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 625142414
Partitions will be aligned on 2048-sector boundaries
Total free space is 2014 sectors (1007.0 KiB)
Number Start (sector) End (sector) Size Code Name
1 2048 4095 1024.0 KiB EF02 BIOS
2 4096 52432895 25.0 GiB 8300 ROOT
3 52432896 53481471 512.0 MiB 8300 BOOT
4 53481472 74452991 10.0 GiB 8300 TMP
5 74452992 95424511 10.0 GiB 8300 VAR
6 95424512 602935295 242.0 GiB 8300 HOME
7 602935296 625142414 10.6 GiB 8200 SWAP
The problem is that tmpfs is mounted at '/tmp' through '/usr/lib/systemd/system/tmp.mount'
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Temporary Directory
Documentation=man:hier(7)
Documentation=http://www.freedesktop.org/wiki/Software/systemd/APIFileSystems
ConditionPathIsSymbolicLink=!/tmp
DefaultDependencies=no
Conflicts=umount.target
Before=local-fs.target umount.target
[Mount]
What=tmpfs
Where=/tmp
Type=tmpfs
Options=mode=1777,strictatime
Because of this, I'm always getting:
● systemd-tmpfiles-setup.service - Create Volatile Files and Directories
Loaded: loaded (/usr/lib/systemd/system/systemd-tmpfiles-setup.service; static; vendor preset: disabled)
Active: failed (Result: exit-code) since Dom 2015-05-03 03:29:58 BRT; 27min ago
Docs: man:tmpfiles.d(5)
man:systemd-tmpfiles(8)
Process: 278 ExecStart=/usr/bin/systemd-tmpfiles --create --remove --boot --exclude-prefix=/dev (code=exited, status=1/FAILURE)
Main PID: 278 (code=exited, status=1/FAILURE)
Then I tried to change '/tmp' to '/run/tmpfs', folder that I created for this, using tmpfs wiki as reference.
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Temporary Directory
Documentation=man:hier(7)
Documentation=http://www.freedesktop.org/wiki/Software/systemd/APIFileSystems
ConditionPathIsSymbolicLink=!/run/tmpfs
DefaultDependencies=no
Conflicts=umount.target
Before=local-fs.target umount.target
[Mount]
What=tmpfs
Where=/run/tmpfs
Type=tmpfs
Options=mode=1777,strictatime,nodev,nosuid,size=1536M
But the error persists. What I'm missing?
Last edited by vinnom (2015-05-03 16:51:38)ooo wrote:Couldn't you just mask the tmp.mount service? (as mentioned in the wiki page you linked)
Then your /tmp partition would be mounted according to your fstab
Raynman wrote:
The tmp.mount generated from your fstab should override the tmp.mount in /usr/lib/systemd/system. You say
The problem is that tmpfs is mounted at '/tmp' through '/usr/lib/systemd/system/tmp.mount'
If that is true (could you show output of mount and your fstab?) that is worth investigating.
However, your original problem seems to be that systemd-tmpfiles-setup.service fails. If something is wrong with your mounts, that could be related, but it might very well be something else. Is there any more information in the journal to indicate why the service fails (maybe even mentioning a tmpfiles.d config file that is responsible)? Did you create any config files for tmpfiles.d yourself?
Sorry guys, I tried to be concise, but ended up that I didn't make myself clear.
My '/tmp' is mounting fine as it takes priority over systemd. In fact, what I wanted to say is that '/tmp' mounts fine, systemd tried to mount tmpfs at '/tmp' and fails and I want to point tmpfs to mount at '/run/tmpfs' which I created for this, but just editing '/usr/lib/systemd/system/tmp.mount' didn't solve.
As for journalctl, it repeats several times this message:
Mai 02 22:43:32 arch_vinnom systemd[1]: systemd-tmpfiles-setup.service: main process exited, code=exited, status=1/FAILURE
Mai 02 22:43:32 arch_vinnom systemd[1]: Failed to start Create Volatile Files and Directories.
Mai 02 22:43:32 arch_vinnom systemd[1]: Unit systemd-tmpfiles-setup.service entered failed state.
Mai 02 22:43:32 arch_vinnom systemd[1]: systemd-tmpfiles-setup.service failed.
foutrelis wrote:
Depending on how your '/var' file system is created/mounted, you might need to enable ACL on it:
https://wiki.archlinux.org/index.php/Sy … rt_at_boot
hmm
I created my /var during arch installation, with mkfs.reiserfs.
Using
tune2fs -l /dev/sdXY | grep "Default mount options:"
To check if acl was already enabled, I got:
[root@arch_vinnom vinnom]# tune2fs -l /dev/sda5 | grep "Default mount options:"
tune2fs: Bad magic number in super-block while trying to open /dev/sda5
Couldn't find valid filesystem superblock.
Then I searched a bit and noted that reiserfs isn't compatible with acl =/
Last edited by vinnom (2015-05-03 15:12:18) -
ROLAP cube aggregation deployment failure
Hi All
My ROLAP cube aggregation deployment is failing with following error:
dbms_odm.createcubeleveltuple ORA-06533: Subscript beyond count
Has anyone got any idea about this failure please ?Hi Bonniejp,
According to your description, it seems that it's a permission issue when deploy project to Analysis Services. By default, the default account for AS services has only public permission to few databases. If you haven't change the AS services
account, or haven't grant the permission for this account, then you cannot deploy the AS project to server.
So in your scenario, to avoid this issue, you can grant the SELECT permission for the default account for AS services to data source DB (Adventure Works DW2012). Or you can change the services account to this domain user who has the corresponding to the
data source DB.
If this is not what you want, pelase post the detail information about the error, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support -
Deploy failure due to jta-data-source in persistence.xml
Hey All,
This is driving me insane. Every example, including the Sun tutorials (which don't work on my instance of Glassfish), list persistence.xml files like:
"<?xml version="1.0" encoding="UTF-8"?>
<persistence xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.0">
<persistence-unit name="persistence_sample">
<provider>oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider</provider>
<jta-data-source>jdbc/SamplesDB</jta-data-source>
<non-jta-data-source>jdbc/SamplesDB__nontx</non-jta-data-source>
</persistence-unit>
</persistence>"
I've tried every combination of <persistence...> tags, with namespace definitions, posted in examples on the internet, but my problem is, any time I deploy my ear with a "<jta-data-source>" tag specified, I receive the following failure from the App Server:
"Error loading deployment descriptors for module [pi-0] Line 26 Column 24 -- Deployment descriptor file META-INF/persistence.xml in archive [pi-ejb.jar]. cvc-complex-type.2.4.a: Invalid content was found starting with element 'jta-data-source'. One of '{"http://java.sun.com/xml/ns/persistence":class, "http://java.sun.com/xml/ns/persistence":exclude-unlisted-classes, "http://java.sun.com/xml/ns/persistence":properties}' is expected.
at com.sun.enterprise.deployment.backend.Deployer.loadDescriptors(Deployer.java:352)
at com.sun.enterprise.deployment.backend.AppDeployerBase.loadDescriptors(AppDeployerBase.java:327)
at com.sun.enterprise.deployment.backend.AppDeployer.explodeArchive(AppDeployer.java:332)
at com.sun.enterprise.deployment.backend.AppDeployer.deploy(AppDeployer.java:182)
at com.sun.enterprise.deployment.backend.AppDeployer.doRequestFinish(AppDeployer.java:129)
at com.sun.enterprise.deployment.phasing.J2EECPhase.runPhase(J2EECPhase.java:169)
at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.java:95)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentService.java:871)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:266)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:739)
at com.sun.enterprise.management.deploy.DeployThread.deploy(DeployThread.java:174)
at com.sun.enterprise.management.deploy.DeployThread.run(DeployThread.java:210)
Caused by: org.xml.sax.SAXParseException: cvc-complex-type.2.4.a: Invalid content was found starting with element 'jta-data-source'. One of '{"http://java.sun.com/xml/ns/persistence":class, "http://java.sun.com/xml/ns/persistence":exclude-unlisted-classes, "http://java.sun.com/xml/ns/persistence":properties}' is expected.
at com.sun.enterprise.deployment.io.DeploymentDescriptorFile.read(DeploymentDescriptorFile.java:285)
at com.sun.enterprise.deployment.archivist.Archivist.readPersistenceDeploymentDescriptor(Archivist.java:1718)
at com.sun.enterprise.deployment.archivist.EjbArchivist.readPersistenceDeploymentDescriptors(EjbArchivist.java:239)
at com.sun.enterprise.deployment.archivist.Archivist.readDeploymentDescriptors(Archivist.java:301)
at com.sun.enterprise.deployment.archivist.Archivist.open(Archivist.java:200)
at com.sun.enterprise.deployment.archivist.ApplicationArchivist.readModulesDescriptors(ApplicationArchivist.java:308)
at com.sun.enterprise.deployment.backend.Deployer.loadDescriptors(Deployer.java:316)
... 11 more"
Note that this only happens when I have a <jta-data-source> element in the persistence.xml file. When I comment out the jta-data-source, it deploys without problems (though it doesn't do much). Here's my persistence-unit code:
<persistence-unit name="prodcontext" transaction-type="JTA">
<provider>org.hibernate.ejb.HibernatePersistence</provider>
<class>OneOfMyClasses</class>
<jta-data-source>jdbc/SamplesDB</jta-data-source>
</persistence-unit>
Please help.
Thank you,
ToddOkay okay, my mistake (staring at this thing too long).
The solution is, I confess I overlooked it, the jta-data-source node in the xml has to follow the exact order specified in the xsd. I was putting it below the class nodes, which is a no-no. -
J2EE-EJB-Deploying an Enterprise JavaBean-deployment failure
I am unable to deploy a simple EJB application . I am using j2skee1.3.1 and J2SDK1.4.0
The related files and error messages are reproduced.
The java files and ear files are in d:\myjava\ejb
class path is .;d:\j2sdkee1.3.1\lib\j2ee.jar;D:\forte_jdk\j2sdk1.4.0\lib;d:\myjava
j2ee_home= d:\j2sdkee1.3.1
java_home=D:\forte_jdk\j2sdk1.4.0
path=%SYSTEMROOT%;%SYSTEMROOT%\command;c:;d:\j2sdkee1.3.1\bin;%SYSTEMROOT%\system32;%SYSTEMROOT%\system32\WBEM;C:\Program Files\Common Files\Adaptec Shared\System;D:\forte_jdk\j2sdk1.4.0\bin;d\j2sdkee1.3.1\javaservlets;d:\MSSQL7\BINN;D:\forte_jdk\j2sdk1.4.0\bdk1_1\beans\beanbox
Can any one suggest a solution.
************calculatorHome**********
import java.io.Serializable;
import java.rmi.RemoteException;
import javax.ejb.CreateException;
import javax.ejb.EJBHome;
public interface calculatorHome extends EJBHome
calculator create() throws RemoteException, CreateException;
************calculator***************
import javax.ejb.EJBObject;
import java.rmi.RemoteException;
public interface calculator extends EJBObject
public double dollorToRs (double dollars) throws RemoteException;
**********calculatorEJB***********************
import java.rmi.RemoteException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
public class calculatorEJB implements SessionBean
public double dollarToRs (double dollars)
return dollars * 48.15;
public calculatorEJB() {}
public void ejbCreate() {}
public void ejbRemove() {}
public void ejbActivate() {}
public void ejbPassivate() {}
public void setSessionContext (SessionContext sc) {}
***********************************descriptor*************
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN' 'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
<ejb-jar>
<display-name>newcalculatorjar</display-name>
<enterprise-beans>
<session>
<display-name>calculatorEJB</display-name>
<ejb-name>calculatorEJB</ejb-name>
<home>calculatorHome</home>
<remote>calculator</remote>
<ejb-class>calculatorEJB</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Bean</transaction-type>
<security-identity>
<description></description>
<use-caller-identity></use-caller-identity>
</security-identity>
</session>
</enterprise-beans>
</ejb-jar>
***************************error message*****
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN' 'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
<ejb-jar>
<display-name>newcalculatorjar</display-name>
<enterprise-beans>
<session>
<display-name>calculatorEJB</display-name>
<ejb-name>calculatorEJB</ejb-name>
<home>calculatorHome</home>
<remote>calculator</remote>
<ejb-class>calculatorEJB</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Bean</transaction-type>
<security-identity>
<description></description>
<use-caller-identity></use-caller-identity>
</security-identity>
</session>
</enterprise-beans>
</ejb-jar>
STATIC VERIFICATION RESULTS
NUMBER OF FAILURES/WARNINGS/ERRORS
# of Failures : 3
# of Warnings : 0
# of Errors : 0
RESULTS FOR EJB-RELATED TESTS
FAILED TESTS :
Test Name : tests.ejb.intf.remoteintf.RemoteInterfaceMatchMethodArgs
Test Assertion : Remote interface business methods have matching method arguments test
Test Description : For [ calculatorEJB ]
For Remote Interface [ calculator ] method [ dollorToRs ]
Error: No corresponding business method with matching arguments was found for method [ dollorToRs ].
Test Name : tests.ejb.intf.remoteintf.RemoteInterfaceMatchMethodException
Test Assertion : Remote interface business methods have matching method exceptions test
Test Description : For Remote Interface [ calculator ] method [ dollorToRs ]
Error: No corresponding business method with matching exceptions was found for method [ dollorToRs ].
Test Name : tests.ejb.intf.remoteintf.RemoteInterfaceMatchMethodReturn
Test Assertion : Remote interface business methods have matching method return type test
Test Description : For [ calculatorEJB ]
For Remote Interface [ calculator ] method [ dollorToRs ]
Error: No corresponding business method with matching return type was found for method [ dollorToRs ].
Thanks in advance.
NagarajanIn EJB home you have -
public double dollorToRs (double dollars) throwsIn EJB you have -
public double dollarToRs (double dollars)There is a spelling difference in the function name -
MDT 2012 UNC Deployment Failure with static IP.
I am having trouble getting my UNC deployment to run the State Restore phase. I am operating on a network without DHCP and have successfully connected to the network share and ran the Task Sequence. After the reboot, however, the static ip doesn't get set
and the deployment can't continue.
Upon inspection of the BDD.log I ran across the entry in the State Restore section that pertains to setting the static ip.
WMI Function: Adapter.EnableStatic(IPAddress,SubnetMask) FAILURE: -2147217405 Unknown Error: -2147217405
If I log in and run the LiteTouch.wsf file as an administrator, the task sequence starts running again and the static ip gets applied.
Why is this not happening automatically?The account I'm using does have permissions. I use the same account to join manually after the process is complete. I'm not sure what the purpose of the Temp Account is. I only see it if the process fails. Otherwise, if the process completes, it is not there
when I log in. The Administrator account is disabled by Group Policy but since it never joins the Domain, the Administrator account doesn't get disabled.
There is no ZTIDomainJoin.log
NetSetup.log is as follows:
NetpDomainJoin
NetpMachineValidToJoin
OS Version: 6.1
Build Number: 7601 (7601.win7sp1_ldr.130828-1532)
ServicePack: Service Pack 1
SKU: Windows 7 Enterprise
NetpGetLsaPrimaryDomain: status: 0x0
NetpMachineValidToJoin: status: 0x0
NetpJoinWorkgroup: joining computer 'MININT-TBQSA02' to workgroup 'WORKGROUP'
NetpValidateName: checking to see if 'WORKGROUP' is valid as type 2 name
NetpCheckNetBiosNameNotInUse for 'WORKGROUP' [ Workgroup as MACHINE ] returned 0x0
NetpValidateName: name 'WORKGROUP' is valid for type 2
NetpSetLsaPrimaryDomain: for 'WORKGROUP' status: 0x0
NetpJoinWorkgroup: status: 0x0
NetpDoDomainJoin: status: 0x0
Now I realize that it appears to be joining the "Workgroup" Workgroup, but in my customsettings.ini I have the JoinDomain variable set to the proper domain.
Maybe you are looking for
-
SRM 5.0 - Non-replication of Blocked Vendors from R/3 to EBP
Hi Team, We are using SAP SRM 5.0 for e-procurement. Issue: The R/3 vendor is transferred to SRM for creation of bidder ID for e-procurement. Presently there is no check/warning message in the system while transferring blocked vendor from R/3 to SRM
-
Video Pixelation Issue - New HP Pavilion 15-P008TX Notebook - Windows 8.1
Ahoy, I've seen topics regarding this issue - i.e. first day running a new HP Pavilion 15-P008TX, using Windows 8.1... However the video quality on videos being played from the DVD Drive, HDD, and streamed videos (e.g YouTube) are extremely low quali
-
JRUN Server Configuration - Urgent
Dear friends, Now I am working an JSP Project.. So I am using jsp files like http://localhost:8100/test/test.jsp But i want to access that jsp file with out 8100 port.. like http://localhost/test/test.jsp or any other.. Is is possible.. If possible p
-
Which external USB HDD can i use for backups
Hi, I'm going to buy an external USB HDD for my MacBook for bootable backups (by SuperDuper). Can I purchase just any external hard drive or are there any limitations? Thanks, Vadim
-
Mario party 10 online order missing gamers club unlocked discount
Hello, I just noticed on my receipt for my Mario Party 10 preorder that my Gamers Club Unlocked discount was not applied. The discount was applied to the Kirby WiiU preorder and my preorder of The Order:1886 for PS4 from the same order. How do I get