Peut changer un control en indicateur de manière dynamique ?

Bonjour,
Peut changer un control en indicateur de manière dynamique ?
Cordialement
La théorie, c'est quand on sait tout et que rien ne fonctionne.
La pratique, c'est quand tout fonctionne et que personne ne sait pourquoi .
(A. EINSTEIN)

Vous pouver changer une valeur de control dynamiquement avec un "Value Property Node"
- tbob
Inventor of the WORM Global

Similar Messages

  • ANY SY-INDEX REFLECT CHANGES WHEN CONTROL BREAK STATEMENT PROCESS

    Dear Guru's,
                     I have a requirement where i have to move the values to variable when control break (AT END OF) process. So i want to move the values according to the end of Vendor so for that  i want to know is there any sy-index available which reflects changes when Control break (AT end of) process.
    LIKE Sy-subrc = 0 when select statement fetches record or sy-tabix is like counter for loop.
    Hope to get reply soon.
    Regards,
    Himanshu Rangappa

    Hi,
    There is no system Fields for it.
    But your requirement can be done with 'AT NEW' and 'AT END' statement.
    Refer this sample example,
    loop at otab.
        at new module.
          move otab-module to otab2-module.
        ENDAT.
          at END OF effort.
          sum.               "Do your calculations here
          move otab-count to otab2-count.
          append otab2.
        endat.
      endloop.

  • CS4 - In InDesign can I change the Control Panel????

    I have recently upgraded to InDesign CS4 and I'm finding that my Control Panel does not match the one I used in CS3. Is there a way of adding tools to the Control Panel? Or changing the Control Panel?
    For example when I have text selected the Character Formating Controls offer: font, font size, leading, some options like superscript & subscript, alignment, indents, space before & after, drop cap, bullet list & number list. When I switch over to the Paragraph Formating Controls I get the exact same items just in reverse order. How do I add kerning, horizontal scale, the hyphenation box, and more. I'm noticing similar issues when I have an object selected, where is my "fit frame to" options?
    It seems with CS3 I had so much more available, is there any way to get CS4 to be set up in the same way?

    More options appear on the Control panel if you choose the Advanced workspace instead of Essentials. Choose Window > Workspace > Advanced.

  • Change Message Control for Customer Master data

    Hi Friends,
    I have to choose/populate a message when the user is about to create an already existing customer.
    In SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for creating customer master data --> "change message control for customer master data" ...
    OK...
    When u click this it goes into Change View "message control by User" Overview screen wherein u can insert new messages and texts and the type of message ....
    Now .....
    I want to display the 145th message (F4 help of the Message column) ..... it picks up the text "Customer found with same address;check"..... with Online mesasage type 'I' and batch type 'I' and with standard type '-' ..
    I want to have the same message with message types 'E','E', and 'I' respectively.......
    How is this possible (or) what should i do to meet my requirement :-|
    Expecting ur answers
    Thanks in advance ........
    Cheers,
    R.Kripa.

    Hey yes it is not possible (as of now
    I ve met the requirement by just using message statement in the program itself ............
    My requirement is met but still if anyone knows about this do answer / reply
    Thanks
    Cheers,
    R.Kripa.

  • Currency change in controlling area...

    Dear All,
           We are demerging one company code out of 8 company codes, There is one controlling area to that 8 company codes are assigned and that controlling area currency is NOK, we demerged one company code out of 8 and put in another server and this company code currency is LKR, but controlling are currency is NOK, now client is asking me to change the currency to LKR, when i try to change system is throwing error, is it possible to change the controlling area currency after data is posted, if i change what will be the implications..
    Regards,
    Suresh Patipati.

    Hi Suresh,
    It is not possible to change the controlling area currency after data has been posted.
    Regards
    Sharabh Ivaturi

  • How to change slider control digital display precision from program

    I want to change slider control digital display precision from my Labview 2013 program. I can not find property that changes slider digital display format. 
    Solved!
    Go to Solution.

    rt clk the digital display>create>property node>format string
    you could also do the slide scale, if needed...
    from the front panel:rt clk properties>goto display format tab>goto drop down list and pick "digital display 0" and format

  • Change Table control Column Header text dynamically

    Hi,
    I have an requirement to change table control column header text dynamically.
    i.e. I have about 10 columns in table control, out that need to change 5 columns header text. These header texts are stored in an internal table.
    I had looked into the below link but could not get exactly how to do it.
    Dynamic headers in table control
    Could you please tell me how to do that.
    Thanks in Advance.

    Hi Saba,
    What you will need to do is this.....
    1. First replace the column Header Text box by I/O Fields and name them accordingly.
    Say for example we will consider the same example which i had explained in the link.
    there in the column header we want the header to change when some dates and entered into two fields which are out of table control say
    Start Date: 01.01.2010 to End Date: 06.01.2010
    Now we want the header to look like this,
    Column  No.    -        1               2             3                  4               5               6
    Header label   -    01/FRI       02/SAT     03/SUN       04/MON     05/TUE      06/WED
    Header name -    SPOTS1   SPOTS2    SPOTS3      SPOTS4     SPOTS5    SPOTS6
    then you go as per the instructions in the link......
    Let me know if you need further help,
    Hope this solves your problem....
    Regards,
    Abhijit G. Borkar

  • How to change IDoc control record

    Hi all,
    How to change the control record of the ORDERS (purchase order) outbound IDoc? The partner type and partner number is always the logical system. I want to change it to other partner type, e.g. KU.
    Is there any user exits availalbe?
    Thanks!
    Regards,
    Hui

    Hi,
    <b>Option-1</b>
    User user-exit<b> EXIT_SAPLEINM_001</b> of <b>enhancement MM06E001</b> to change the control record.
    But make sure that whatever control record you put here, there should be a corresponding partner profile exist in partner profile ( WE20 ).
    <b>Option-2</b>
    You are saying that you are always getting 'LS'. This is  because the output type is only configured with partner function 'LS'. We are using Purchase order idoc and we generate our all idocs for partner type 'KU'.
    To do this, follow these steps.
    - go to transaction <b>NACT</b>
    - enter application 'EF' and select 'maintain'.
    - select the output type you are using in PO for EDI.
    - with this output type selected, select "partner functtions" from left hald side options.
    - Hit "new entries" button on the top
    - create an entry with, MEDIUN = 6 (EDI) ; Funct = VN ( vendor )
    - Save your settings and come out
    - Now on WE20, remove the partner profile you have created under partner type 'LS' and instead create a same partner profile for your vendor under partner type "KU".
    Now it is upto you to decide, either to user the user-exit i have mentioned to change the control records OR create a outout config and partner profile for "KU".
    Let me know if you have any question.
    Regards,
    RS

  • Changing default control values in LV application?

    Can anyone help me?
    Is it possible to change default control values in LV program
    programmatically?
    Sergey Yakovlev, Berlin,
    [email protected]

    Its quite complex (in my opinion) to do so programically , but using a set of invoke nodes, you can get it done ('Make this value default'). Look at the attached for info (its a large link name, so you may have to copy and paste in your browser).
    http://zone.ni.com/devzone/devzoneweb.nsf/opendoc?openagent&2C14132F826F839F8625683A000B0B99&cat=DB5863CD70417B07862567930070A058
    I've been simply using config.txt files of read and write to set values.

  • Changing Price Control S to V

    Hi
    Currently we have Price Control as S in the System for the Trading Finished Goods
    I need to change it V.....
    Before Changing it the Price control form S to V I just whated to confirm what would be the impacts in calculation of Cost.
    Regards
    Ash

    Hi
    U can change price control at any time also if stock exist for that material
    Check SAP help for this
    http://help.sap.com/erp2005_ehp_02/helpdata/en/47/60ff6249f011d1894c0000e829fbbd/frameset.htm
    Vishal...

  • Functional upgrade from 4.6C to ECC6, changes in Controlling

    Hi
    We will be doing a functional upgrade from 4.6C to ECC6. I need to know what are the changes in Controlling on ECC6, with specific reference to the Aerospace and Defence Industry Solution. We have completed the technical upgrade.
    Thanks
    Henry Bekker
    [email protected]

    Hi
    We will be doing a functional upgrade from 4.6C to ECC6. I need to know what are the changes in Controlling on ECC6, with specific reference to the Aerospace and Defence Industry Solution. We have completed the technical upgrade.
    Thanks
    Henry Bekker
    [email protected]

  • Changing GL Control Account of existing Business Partner

    Hi, We have created and processed against some business partners. However the "Accounts Receivable", under the "Accounting" tab, the wrong GL account was selected. Now it is greyed out because there is postings. Is there anyway to reallocate the transactions to the correct account as well a fixing the "Accounts Receivable" account?

    I don't think so it is possible to change the control account for a BP after transction are done.
    Alternatively put the BP on hold and create a new BP with proper control accout.

  • Use mouse scroll wheel to change numeric control

    Does anyone know if and how I can use the mouse scroll wheel to change numeric control values?

    Another option would be to change the timeout.  This would avoid the timeout event every ms when the mouse has not "entered" the contol.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Mouse Scroll.vi ‏14 KB

  • Price control cannot be changed (cost control split exist)

    Hi FI Experts,
    When changing the  price control field in material master through MM02 from "V" to "S" , the following message is displayed.
    "Price control cannot be changed (cost control split exist)".
    What should i do to avoid this?
    Regards,
    Sudarshan

    Hi Sudharshan,
    Before changeing the Price Control from V to S please check the Moving Price and Std.Price is equal or not.
    This is one of the reason for that.
    Pleease assign points
    regards,
    Gopi.

  • Programmatically changing the Control Type of ViewCriteriaItem

    Our requirement is dynamically changing the Control Type (Date, LOV, Combo box, etc) of ViewCriteriaItem.
    We are trying in the following way,
    ViewCriteriaManager vm = view.getViewCriteriaManager();
    oracle.jbo.ViewCriteria vca[] = vm.getAllViewCriterias();
    oracle.jbo.ViewCriteria vc = vca[0];
    vc.removeAllElements();
    ViewCriteriaRow vcr = vc.createViewCriteriaRow();
    vcr.setAttribute((String)viewItemRow.getAttribute("WvciColumnName"),"");
    ViewCriteriaItem vc_item1 = vcr.ensureCriteriaItem((String)viewItemRow.getAttribute("WvciColumnName"));
    // Based on some condition
    vc_item1.setProperty(ViewCriteriaItem.CONTROL_TYPE, ViewCriteriaItem.ControlType.DATE);
    But the control type is not changed in UI?
    Kindly help us
    Regards,
    Vijay

    Hi Sonny:
    Finally I've solved the problem in Java mapping program, changing the content-type parameter like this:
         public void setParameter(Map mParametro)
              this.mParametro=mParametro;
              if (mParametro==null)
                   this.mParametro=new HashMap();
              mParametro.put(StreamTransformationConstants.CONTENT_TYPE, "text/xml");
    I hope it helps you. Regards,
    Alejandro.

Maybe you are looking for