PeView open large pdf File very slowly!

I have a pdf file with 422M,On the OS 10.9 preview it very easy,very fast and no noise with fan.
when updated OS 10.10,preview it very slowly, the fan more fast and more noise,why? it's back!

Reader is a pretty good tool, but it isn't designed to check validity specifically; then again, nor is anything else.
Can you share the URL of the file?

Similar Messages

  • Unable to open large pdf files..

    I'm holding an E61 pda-phone. I downloaded acrobat reader v1.5. However, i still unable to view large pdf files, anyone pls advise... Thks

    My guess is you're running out of memory when you load the file: is it bigger than the memory the phone has available before you try to open it?
    You may be able to get around the problem by reducing the amount of phone memory in use: close any other applications you have running and move non-system files (documents, music, photos) from phone memory to card memory.

  • Primavera Contract managment take much time when open large PDF files.

    Dears,
    i have a big problem!
    i made integration between the PCM and sharepoint 2010 and make migration from the file system to sharepoint.
    the sharepoint database reach 355GB
    after that unfortunately, when i try to open large pdf attachment through PCM(Primavera Contract Managmnet) it take much time then whan was opened from the file server.
    i made everthing upgrde the RAM and processor but the problem still exists.
    please help!
    Edited by: 948060 on Sep 19, 2012 1:48 AM

    we start store attachment on 2007. all of these files are migrated to sharepoint 2010 now on the staging enviroment.
    but, we faced the performance issue as mentioned above.
    the large files (begin 5MB) take a lot of time to open through the PCM

  • CS4 chokes opening large pdf files CS doesn't

    Opening larger pdfs (over 20 megs) in CS4 sometimes takes more than 10 minutes and sometime will just choke. The older version CS will open the same file in under a minute and never chokes. Why is this?

    How was the file created? What kind of PDF? Sounds more like the older CS is simply ignoring a lot of stuff, whereas CS4 reads it all and retains it, in case you save to the same file...
    Mylenium

  • Unable to open large PDF file from the Attachment list.

    Hi Gurus,
    Users had attached 10 PDF file in the work order attachment list and his supervisor is trying to open the PDF file from the work order attachment list and he is able to open 9 PDF files without any issue, but 1 PDF file is giving the error message as "Database error for <GET DATA FROM KPRO>" and then select ok, we are getting the below message.
    Window cannot find u201CC/Documents and Settings/b2m/SaoworkDir/5015851 Vendor data sheets B&P 2010 SDown XXX .PDFu2019. Make sure you typed the name correctly, and then try again. To search for a file, click the start button, and then click serch.
    Looks like this particular file is not transferring to the SAP work directory.
    Could you please check and suggest us as to how to fix it.
    Thanks & Regards,
    Srivas

    Hi,
    Thanks for your reply.
    We verified  your OSS notes it's not relevant to us Because our issue is while opening the PDF aatchement it is not transferring to my SAP Work Directory because of that reason we are getting the KPRO error. When I'm opening the other PDF files it's transferring to my SAP Work Directory and it's automatically open without any issue.
    Please check and suggest.
    Thanks,
    Srivas

  • Safari crashes when opening large PDF files

    Since upgrading to iOS 7 we have found that anytime we try to open a PDF larger than 30MBs our Safrai browsers crash.  I've tried it on the Mercury browser and had the same results, the only difference being that I can download the PDF as a file and then tell it to open in the Adobe Reader.  We have a large number of iPads out for our students and about 45 books that they can no longer access.  Any thoughs on how to remedy this would be greatly appreciated.

    We are having a similar issue. We have 230 some links in inDesign. When our editor opens the file in incopy it spins and then crashes if we wait long enough. We did get a crash report.
    We checked and recreated all the links however incopy still fails to open. File still works fine in indesign. We to have been unable to isolate the source of the problem.
    Process:         Adobe InCopy CS6 [15554]
    Path: /Applications/Adobe InCopy CS6/Adobe InCopy CS6.app/Contents/MacOS/Adobe InCopy CS6
    Identifier: com.adobe.InCopy
    Version: 8.0.1.406 (8010)
    Code Type:       X86 (Native)
    Parent Process: launchd [14102]
    Date/Time: 2013-04-26 10:05:00.418 -0400
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          121909 sec
    Crashes Since Last Report:           10
    Per-App Interval Since Last Report:  34426 sec
    Per-App Crashes Since Last Report:   5
    Anonymous UUID: 6C1B710E-D18A-4F99-9EE5-A824377A122F
    Exception Type: EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Crashed Thread: 0  Dispatch queue: com.apple.main-thread

  • Issues opening large PDF files.

    Hi, we have a department that keeps producing large reports. These PDF files exceed 200mb.
    Is there a way to compress or speed up the opening process in Adobe Reader?
    I'm doing some testing with a 200mb file now and it's still trying to open after 30 minutes.
    Any help much appreciated.

    My suggestion is that the department producing these large documents reduces them in size before making them available.
    Adobe Acrobat can optimize PDF documents; the resulting PDF size can be as small as 1% ~ 2% of the original (depending of its contents, of course).

  • Cannot Open Large PDF file 100 mb

    Cannot open a 118 Mb pdf file. Adobe Reader 11 opens, no error messages, does not show the file. I downloaded the file from three different sources.
    Is there a utility that I can use to check the validity of the pdf file?
    tony-only

    Reader is a pretty good tool, but it isn't designed to check validity specifically; then again, nor is anything else.
    Can you share the URL of the file?

  • Opening and closing files very slowly -MAC - Batch processing broke illustrator...

    I have been batch processing between 15 and 30 thousand svg files over the past few days(simply centreing the orbjects on the art board mergring overlapping objects and saving as AI's) - the individual files are very small 20kb max. this was working fine for a while but suddenly illustrator now takes nearly 30 seconds to open any one individual file - svg or otherwise - and also when I look at illustrator in activity monitor as files are opened illustrator uses 100% of the CPU.
    I have no Idea if this is related to all of the batch processing Ive been doing lately but Its the last thing Ive done so...
    Also I have run disk utility on my machine uninstalled and reinstalled illustrator with no success..
    Anyone have any thoughts?
    Thanks!!

    Have you tried at least restarting AI or rebooting the computer?

  • In large PDF files my cursor moves around the page at warp speed. It does not seem to make any difference if I slow it down with Sys Prefs. This is not only in preview but also other programs to open PDFs.

    In large PDF files the cursor moves at warp speed with a mind of it's own, I've tried slowing it down in Sys Pref with no luck. On small files cursor action is normal. This happens in Safari, Preview and other programs that use PDF files. Sorry to say this does not seem to be a new problem with 7.# I've had it with prvevious versions of operating system Right now I'm using a Apple wireless mouse and key board. Using the USB keyboard and mouse the same problem does not go away.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Every time I try to open a pdf file in firefox, it asks me to activate adobe acrobat. How do I stop this from happening?

    I do activate acrobat, but it still comes up next time I need to open a pdf file. The same problem occurs when I use a quicktime file. I get the drop down to let me me allow every time but again , next time I want to use see or hear a quicktime file I get the same question. This is very annoying. I went into options and chose the file to use to open rather than having it ask me but that didn't solve the issue either.

    You can check for problems with preferences.
    Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
    *http://kb.mozillazine.org/Preferences_not_saved
    *http://kb.mozillazine.org/Resetting_preferences

  • After up grading to Adobe Reader XI why can't I open any PDF files?

    I am running windows vista and had been using Adobe Reader 8 - when I upgraded,  can not open any PDF files. When I attempt to open a PDF file, I receive the following messages:
    Update available
    Please take a few seconds to update Adobe AIR and get the very latest features. Acrobat.com cannot continue until you update Adobe AIR.
    after attemptng to down load the "update" I receive the following message.
    Sorry, an error has occurred
    This application requires an update to Adobe AIR but downloading that update was not successful.
    I have uninttalled all of my Adobe freeware & reinstalled statring with "adobe AIR" then "adobe Reader" and then attempted to opne a PDF file only to see the same  message
    Update available
    Please take a few seconds to update Adobe AIR and get the very latest features. Acrobat.com cannot continue until you update Adobe AIR.
    Agein after attemptng to down load the "update" I receive the following message.
    Sorry, an error has occurred
    This application requires an update to Adobe AIR but downloading that update was not successful.

    Thank you Pat,
    I have already been there done that. I first  Un-installed all of my adobe freeware (reader, flash player, air. etc) then started reinstalling. First I reinstalled reader (latest version Reader X), same error messages. added AIR (latest version not listed - Last updated April 1st, 2012 -
    maybe that should tell me something), same error messages. I un-installed these two and reinstalled AdobeFlash Player,Adobe Shockwave Player,&Adobe Media Player, verifying that each worked after each reinstall of the next program everything was OK until I put Reader back on (NOTE: I dug all the way back to version 8 & still had the problem). for some unknown reason I finally right clicked on a PDF file on my desk top & was greeted with a the drop menu & he option of "open with" for fun I clicked on the "open with" & found that I had two options the first was a white Icon with the Stylized A and labeled Acrobat.com the second was the normal red Icon we all know & live
    when I reset the default to the normal red Icon everything began to work just as I have always had adobe reader work. Now I have no clue how or when I picked up the "Acrobat.com" program even worse it does not show up under programs on the control panel. When I have a few moments this evening, I will run a search for "Acrobat.com" & hopefully be able to remove it from my computer.
    Bottom line I don't know how I got the program which seems to have caused the breakdown of adobe reader but by resetting the default program to open PDF files it is now working as it should
    Thanks for the suggestion.
    Sincerely,
    Richard L. Cornick
    Contact information: Cell (562) 522-5504;  Fax: (562) 531-0684

  • Can't open ANY pdf files. Updated to 10.1.8--still "Access Denied."

    Hello everyone,
    I am currently unable to open any PDF files.
    I recently did a clean re-install of Windows 7 (restored my Toshiba Satellite to out-of-the-box state).
    After that, I restored all of my personal files from an external HD.
    Now, every time I try to open a PDF, Adobe Reader gives me the following message:
    "There was an error opening the file. Access denied."
    The only solution I've been able to find online has been this:
    Edit > Preferences > General> Clear "Enable Protected Mode at Startup"
    Also,
    Edit > Preferences > Security (Enhanced)> Clear "Enable Enhanced Security"
    Neither of these has fixed my problem.
    I also updated to the lastest version--10.1.8--with no success.
    I also re-downloaded and installed PDF Creator and its companion, PDF Architect. Curiously enough, I can't open any PDF in that program either. I'm not sure if there is some global setting I'm missing or something.
    Access to these files is critical to my work, so any help is appreciated!
    Thanks,
    Lauren

    I updated from within the Adobe Reader X program (Help > Check for Updates) and it tells me: No updates available. Installed: Adober Reader X (10.1.8) MUI
    Is 11.0.5 something I would have to access another way?
    Also, I'm still not sure if that would fix my problem. It seems most people with the "Access Denied" error had it fixed with the very first 10.1 update, and I have 10.1.8, so I'm not sure what's causing mine.

  • Adobe Reader 9 will not open any pdf files

    I am running Windows 7 and use Adobe Reder frequently. Never had a problem. Last week, whenver I try to open a PDF file, I get a warning box "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item."
    The only thng that changed recently was a couple large Windows updates... I am always suspect when a large update occurs. I uninstalled the Reader and Download Manager and ree-installed themm. No change in performance.
    I checked the registry key - it looks correct based on other posts.
    Does anyone have any suggestions what else to try??

    I've got the same problem. I'll look forward to solving this on this thread.
    It really sucks- I have a ton of pdf files, and can't save them to Documents or send them out of the Adobe file.

  • HELP! opening a pdf file and using page view

    Hi everyone!
    I'm doing a school project in which I'm trying to develop an app that opens a pdf file from the device memory (ipad or iphone) and lets the user turn pages forward and backward by swiping on the screen. Although I have very basic knowledge of C++ and Objective C programming, I find myself completely lost and don't know how nor where to start. I'd be pleased if you could help me or at least give me a starting point to develop my app.
    Thank you
    Albert

    https://developer.apple.com/library/ios/#samplecode/ZoomingPDFViewer/Introductio n/Intro.html#//apple_ref/doc/uid/DTS40010281

Maybe you are looking for