PF status of report

Hi,
I have copied standard transaction IW28 into Z report.When i copied it i copied screen,includes,code etc.This report gives out put into ALV.When i run this report i got the output but message was shown "PF status of main has not been declared for ZRXCOIND".
When I went to SE80 to check objects of IW28 ,i found screens and PF status there but they are not my Z programs although i have copied them from standard.Can you tell me how to copy these element and attach to my Z program and activate to remove that error in report output and having full capability of ALV.

To copy the pf status
1. Goto se41
Choose Status.
The Copy Status dialog box appears. By default, the current program and status appear as the To and Frm program and status.
Enter a new status for the To status.
Choose Copy.
In the next dialog box, you can choose whether the copy should use all of the same or some of the same components. The default option is Same components. However, you can also choose Partly the same...
Choose Copy.
The system creates the new status in another program.

Similar Messages

Work status custom report

Hi Gurus,
I have built a work status custom report. The user was able to change status. When i run my custom EVDRE report no values are retrived for status, user and date/time stamp columns. I am using simple
EVLCK function. I think something is blocking/filtering retrival of data.
Best Regards,
Suresh.

Hi Suresh,
I am looking for the functionality in which we can display the current work status in our BPC excel sheet.
Do you mean the same when u tell work status custom report.
My actual idea is to display the current work status to the user. If you are meaning the same... can you please let me know how have you built the custom report?
Regards,
Swetha

Last Used status for Reports, Transactions, Tables ??

Dear all,
Kindly let me know how to find the last used status for
Reports, Transactions, Tables ??
This is very urgent, Please do the needful.
Waiting for the responses..
Cheers,
Virendra.

Here the issue is same.
STAT transaction is asking for the time which is the main hurdle.
I am hanging around with STAT transaction but not finding
how to getover the time specification.
if i dont specify the time i takes by default the 2 or minutes back from the current time.
which is not useful for me at all.
My main requirement is that my seniors want to know what are all reports or transaction or tables which are not used at what last time ?
so if i have to specify the time wont be so useful for me.
And writing a report 'll not gain anything coz internal SAP report is take time as main parameter.
Regards,
Virendra.

I dont have data in "Client status summary" report for servers in server collection, but get data from our Windows 7?

Hi,
I dont have data in "Client status summary" report for servers in server collection, but get data from our Windows 7?
So and idea of way I dont get data from or servers? Missing client setting for servers?
/SaiTech

Hi,
I do see the server in Server collections in "Monitoring--Client Status--Client Activity" but not in reports like "Clients with failed client check details" i get "No Data Available"?
/SaiTech

How can I limit version status of Report or others components?

How can I limit version status of Report or others components?
If somebody knows please help.
Thanks in advance.

What exactly do you mean ?
Do you mean you don't want the version number of the packaged components (e.g. forms reports etc) every time you make a change ?
If that is the case then I don't think you can do that.
You may be better served asking this question in the Portal Component Forum

Scan Status Lookup Report

I am just learning Invtory. What does it mean when an entry is blue in
the Scan Status Lookup Report?
Why do some entries say scanned but not stored. Does this mean that the
workstation scanned and it hasn't been uploaded to the database yet?
How can I force an inventory to go for the container?
Thanks,
John Jakus

Shaun Pond wrote:
> John,
>
> blue=scanned, not stored - updating the TID with this info now...
>
Cool, thanks. I was study it tonight and that was the impression that i
got. Wonder why so many haven't stored. Some that are blue have data so
I am assuming that is the latest scan hassn't stored. Yet there are some
that have never stored to the database. Need to learn that one.
Thanks Again,
John

PF status in report is not working. Please suggest.

Hi All,
I am creating a report which would be having following3 buttons
1) Save
2) Delete
3) Modify
For relative actions I have already declared the "Set PF-STATUS 'XYZ'. Further going in deep in APPLICATION TOOLBAR I have created these 3 buttons with follwoing specifications
Save:
F.code : SAVE
Delete:
F.code : Delete
Modify:
F.code : Modify
I have written Set PF status in the initialization section.
At very last when I run the report it shows no button on the application toolbar. Please help. Its being cracking the head.
Waiting for fast responses. Pointw would be given right on the time.

Hi Maddu
Below is my code and it works fine. I am using sel.screen 1000.
REPORT zrbtest.
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS : p_werks TYPE werks.
SELECTION-SCREEN : END OF BLOCK b1.
INITIALIZATION.
SET PF-STATUS 'ALV'.
In the PF-STATUS ALV i have included SAVE Function code in the application tool bar. I can see the save in the screen. Try now !!!
Reward points if useful.
Edited by: Raj on May 1, 2008 7:21 PM

Selecting PM order according to status in report

hello
we are writing a report in which we need to select PM orders according to several parameters, one of which is a specific User Status.
I see that there are many tables containing statuses, like TJ20, TJ30, and plenty of others but I cannot find a reference field to connect the status to the PM order.
meaning: TJ30T for instance has a field TXT04 which contains the user status but, no field for the PM order to find the actual order status to compare.
how can I connect a specific order to a table containing user status?
thanks
Alisa

Alisa,
From AUFK table you need to fetch the value for OBJNR for the order number(AUFNR), and using OBJNR value in JEST table you can fetch the status which are active and Inactive.
Text and status details are available in TJ02.
Regards,
Prasobh

Get the Print Status of Reports - D2k/Reports Ver.6

Dear sir,
We are developing all the systems with oracle products. We are facing following technical problem in reports version 6.
1. During continuous cheque printing and pay slip printing in a pre-printed paper, kindly suggest what is the command/procedure to be used for printing sub-sequent pages continuously without any misalignment.
2. After the cheques/pages are printed, we have to identify printed cheques/pages status thro' the reports so that we have to update proper tables based on the printed cheques/pages.
We are badly need the solution for the above problems. Our development activity is standstill due to the above problems. I am expecting expedite reply.
With Regards.
(P.JEYAKUMAR)
PROJECT LEADER, ERP.

Printing checks & recording payments is a bit tricky but can be done with triggers and proper formating.
Too bad you aren't interested in hearing the solution from a mere woman.

QM status tracking Report

Hi Experts,
I have a requirement for a report in BW showing different Status counts per Weeks as shown in below
Status                 Week1         WeeK2          Week3---n(Date Range as Per User)
S1                          10               10                  15
S2                           9                 11                 15
For eg In Week1 10 Notification were having Status (S1)
Currently we have Developed a ABAP Query to fetch All the Status Changes for a Notification to the Data Source(QMEL+JCDS).
I'm ABAP consultant so please advise is it possible to filter the data according to the dates and sum it based on Status in BW?
or is there any other way?
Regards,
kb

I assume this is a cross tab report.
in this case I would expect the raw data to look like
Status Date
S1   week1
S1   week1
S1   week1
S1   week3
S1   week3
S2   week1
S2   week2
S2   week2
S2   week3
S2   week3
S1   week4
the filter in the report would look for date <> week4
and the result would be
Status Week1 Week2 Week3
S1 3 0 2
S2 1 2 2
is this what we are talking about?

Doubt on GUI status in Report

Hi Friends,
I have created a GUI Status for a Report program.
I have written the functionalities for Application Tool bar.
But i have not written any thing for my Functional Keys having Standard Tool bar will the keys in the standard tool bar will work as normal or it will get deactivated.
Reward is sure.
Thanks,
Gokul

Hi Gokul,
If you are setting a PF status for a report then menu items and functional keys in the standard toolbar gets deactivated and depending upon ur requirement u can activate keys.
And if you want to activate the functional keys back, exit and cancel give the function codes as BACK, %EX and RW respectively in the PF Status you have defined and Activate the PFstaus.
Now these functional keys start working normally and you need not write any code for these to work.
If you want clarifications futher let me know.
Reward me if useful.
Regards
Sandhya

Category Project Status Chart report is not viewing in graphical chart.

Hi,
I created a dupilcate "Category Project Status Chart with GL " of "Category Project Status Chart ",however not able to generate the graphical chart on the report.
My Query Defination for the Catagory Report Chart
SELECT <%RESULTS%> FROM ( SELECT DISTINCT INTERNAL_CAT_OBJECT_NAME AS CATEGORY,CASE WHEN
((<%SCHEMA%>.FCI_PRJ_STATUS(T1.OBJECTID,3)) = 1) THEN <%RES_ID(projects$project.status.red)%> WHEN
((<%SCHEMA%>.FCI_PRJ_STATUS(T1.OBJECTID,3)) = 2) THEN <%RES_ID(projects$project.status.yellow)%> WHEN
((<%SCHEMA%>.FCI_PRJ_STATUS(T1.OBJECTID,3)) = 3) THEN <%RES_ID(projects$project.status.green)%> WHEN
((<%SCHEMA%>.FCI_PRJ_STATUS(T1.OBJECTID,3)) = 4) THEN <%RES_ID(projects$project.status.future)%> WHEN
((<%SCHEMA%>.FCI_PRJ_STATUS(T1.OBJECTID,3)) = 5) THEN <%RES_ID(projects$project.status.complete)%> ELSE
<%RES_ID(projects$project.status.unknown)%> END AS PRJ_STATUS_NAME,<%SCHEMA%>.FCI_PRJ_STATUS(T1.OBJECTID, 3)
AS PRJ_STATUS_CODE, <%SCHEMA%>.FCI_DOC_CUR_CONVERT(COALESCE(ESTIMATED_PRICE,0),ESTIMATED_OBJECT_ID,<%COMPANY_CURRENCY_OBJ_ID%>)
AS PRICE,(SELECT DISPLAY_NAME FROM <%SCHEMA%>.FCI_MAS_CURRENCY WHERE OBJECTID = <%COMPANY_CURRENCY_OBJ_ID%>) AS
CURRENCY FROM <%SCHEMA%>.FCI_PRO_PROJECTS T1 WHERE T1.INACTIVE = 0 AND T1.IS_TEMPLATE = 0 AND
T1.CONTEXTID = <%CONTEXT(projects.projects)%> X inner join <%SCHEMA%>.FCI_DYN_$2147483538 ON OBJECTID = <%SCHEMA%>.FCI_DYN_$2147483538.OBJECTID ) GROUP BY GL_DESCRIPTION_OBJECT_NAME,CATEGORY, PRJ_STATUS_NAME, PRJ_STATUS_CODE, CURRENCY <%ORDERBY%>
The report i am seeing is
Normal report with one column as "GL Description" with values in a table.
Please let me know if you have any idea ?
Regards
Sumanta

Hi Rob,
Now the chart is displaying , however the color notaion is not showing, It is showing only one yellow color.In Chart defination i used as *
Color Palette: High Contrast and Legend: East*
as it is in original.
Please let me know if any configuration required.
Regards
Sumanta

GUI status for report

Hi,
I had created GUI status for output list in one report. its status is active in program but in report output this created status is not activated (Menu bar, application toolbar). Has anybody face this kind of problem before?
Regards,
Dilip

hi,
use command
SET GUI-STATUS 'menu1' -> double click on menu1 ->select menu bar radio button from available radio buttons -> click on expand butt0n -> select required buttons n give function codes n select user-command optionfor those buttons ->activate -> back ->activate the report prgm.
i think in our case you didn't activated the menu painter screen. check it once n dont forget to assign f.code n to give user-command after giving static text for buttons that u will use in prgm.
if helpful reward some points.
with regards,
suresh babu aluri.

Incident resolved not updated status in report or database dw

Hi,
There is an incident with status resolved in sm console. Looking in history tab it show all steps finishing in resolving incident. But when I run a report incident details, the status of incident is active. Looking in database dwdamart, all information about
resolution are empty,with null value.
Incidents opened and resolved after this incident are normal. Incidents resolved are resolved in console and report(dw).
Tks.
Vitor Cesar

Problem resolved.
First I unregister and register dw again.
After that, I changed one value in incident from resolved to closed incident and waiting jobs run.
I don't know what resolved this issue...but now is normal.
Vitor Cesar

E Recruitment candidate status update report

Hi Friends,
As per the standard process candidate staus can be updated for any activity based on the design of the workflows, due to some reason some of the events have'nt triggered for some time, so that it won't update the status as per the design,
Now user wants to update all the relevant status at one instance, so we are developing a custom report to update the candidacy status manually for specified period by considering the application status in table HRP5132 and update the same status for candidate in candidate information through HRP 5133.
So when user wants to change the status of candidacy for any activiy, he can choose and generate the report to change the status of the candidate.
Kindly provide your suggestions for the same.
Regards,
Venkat Charan.

Hi,
the candidate status is stored in Infotype 5102. The candidate status declares if a candidate released his profile for pool search or not. A bit strange is that there are 3 values for the status - one for not released, and 2 different values for released - let's just say this is e-recruiting history.
Applications and assingments to requisitions (akaCandidacies) have their own independent status. Stored in their infotypes 5132 (Application) 5133 (Candidacy).
All status are domain value lists - so they cannot be customized.
Hope that answers the question.
Best Rgds,
Roman Weise

PF status of report

Similar Messages

Maybe you are looking for