PFCG and transports

Hello,
Is it possible to configure the system to create a request for every role change?
I know how to transport roles between the systems.
Thank you,
Amir

Hi,
I would recommend not to change the standard behaviour due to unknown side effects as mentioned by Jurjen.
But you can find changed roles with the authorization info system (AUTH, SUIM --> change documents) and transport these roles with report PFCG_MASS_TRANSPORT. This report is also used in transaction PFCG (mass transport).
You may write your own program to detect role changes and add them to a transport with PFCG_MASS_TRANSPORT. Such a program can run once a day.
But it is also possible to use a user exit in PFCG to add the role to a transport.
O sorry, I forgot one important thing: please check, whether PFCG_MASS_TRANSPORT can run in batch. There are some dynpros that have to be filled, may be you can do that only in dialog mode. So the best way is to use a user exit and to perform "transport_activity_group".
regards
Rainer

Similar Messages

Webinar: Change Management and Transport in the Enterprise Portal

SAP NetWeaver Know-How Network Webinar:
Change Management and Transport in the Enterprise Portal
Wednesday 21 July 2004
11 a.m. EDT
On Wednesday 21 July, Scott Jones hosts the webinar titled Change Management and Transport in the Enterprise Portal as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Scott describes his webinar presentation:
Change Management offers special challenges to administrators working in Enterprise Portal 6.0 SP2 environments. This talk provides recommendations and tools, and defines best practices and methods for the effective transport of Enterprise Portal content, with special attention to content dependencies, tracking, and troubleshooting. We'll also look forward to Change Management enhancements coming with Netweaver 04.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code TBD.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Hello,
In the intresting document I read that for the deployement the version number mentionned in the MANIFEST.MF is very important in a clustered evironment.
SAPnote 727180 - Version of PAR File in Manifest File
denies this.
Can you clear this out?
Kind Regards
Koen Van Loocke

How to get truck no and transporter name from header.text(vf03) to webi rep

Hi
making a stock received details bill wise with webi (bo 3.1)
so require a truck no and transporter name along with consignor detail and bill wise detail.
picking data from vbrk and vbrp tables.
pls assist in this
Thanks and Regards
Ritu Raj
BI/BO Consultant

Thanks M
Yes It is Sales and Distribution process and we are using ODBC Connectivity through database client for the connection parameter in the Universe designed to the R/3 ECC.
So we dont have
a) DS
b) BW
c) Data Connector
So Universe is basically on the relational Data
base where by linking VBRK,VBRP and various Master tables.
(OLTP level universe)
So the quesion remain as it is bcos we cant access functional module READ_TEXT in the R/3
Pls suggest for the following Alternatives
a)Using Crystal Reports
b)Use BW (Currently it is not there,but soon be Implemented)
What do you think?
Bcos we dont want to refresh z table which could be developed from given functional module before running our report.
Regards
Ritu Raj

Probelms while replicating Data Source and transport into test system

I find the following error messages whilre transporting into test system.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Mapping between data source 0EC_PCA_1 and source system is inconsistent.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
any ideas please..........
Enhanced the Extract structure and activated the data source in Source system
Replicate the Data source in BI and install the Infosource through BI Content activated and transport them to Test system.

Hi,
1.First transport the data source from R/3 dev to R/3 quality
2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you data source may not appear)
3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
activate these info objects and collect in another request
4.transport these info objects from BI dev to BI quality
5.transport entire data source to bw quality.
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM

Best practise in SAP BW master data management and transport

Hi sap bw gurus,
I like to know what is the best practise in sap bw master data transport. For example, if I updated my attributes in development, what are the 'required only' bw objects should I transport?
Appreciate advice.
Thank you,
Eric

Hi Vishnu,
Thanks for the reply but that answer may be suitable if I'm implementing a new BW system. What I'm looking for is more on daily operational maintenance and transport (a BW systems that has gone live awhile).
Regards,
Eric

Creation and transportation of query from development to simulation system

Hello experts,
I need to create a new Query in the development system in the General Ledger folder in Financial reporting. and then I need to transport the same to the simulation system. what are the correct steps I need to follow to do the same if have to avoid any issues during this transportation.
Do I need to do any modifications to the role ZS_XX_BEX_MENU and transport the same?
Could anyone help me in this regard giving me the exact procedure I need to follow.
Regards

No need to modify, but if it is $temp then change it has ur won request.
follow the genral procedure
1)In RSA1 Go to Transport tab and collect ur query.
Drag to right screen
If it is in $Temp change it to your own request. For this You may need Access.
2)Query contains all objects which were used in that query.
if any Info object that are created newly then check for Transport
3) Then, finally click on transport(Truck) icon
4) By default, it will collect all new objects including newly created Info Objects also. You can change the collections of your own selection.
You will get a Request Number here. Please save this Number so that you can check this at SE09
5) In SE09 search for your Request Number.
6)Release The request by subsequent process onwards( Means sub contents like infoprovider first and then Query)

What's the difference between transport route and transport layer

what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

Hi,
Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development
    work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport
    layer.
    The transport layer determines whether objects are assigned to a local
    or transportable change request.
Use
    Each of your SAP development systems is assigned a transport layer as
    its standard transport layer. If you use Extended Transport Control, you
    can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System
and transport layer.
When you create a package, it is assigned the standard transport layer
of the SAP System.
If you want to assign a different transport layer to a package, you
require the administration authorization for the Change and Transport
System.
The objects in a package automatically have the transport attributes
defined for the corresponding transport layer.
o   If a consolidation route originating in their SAP System is defined,
     then the objects are assigned to a transportable request, and
     transported into the consolidation target when it is released.
o   If a consolidation route is not defined, the objects are assigned to
     a local request, and are not transported.
Customizing settings are not assigned to a package. They have the
transport attributes of the standard transport layer of the system or
client.
It is best to assign a package a standard transport layer for which a
consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the
Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
     The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
     Release 4.0A and cannot be maintained.
Regards
Ben

Object locked after Release and Transport to QAS/PRD

During an attempted recovery of our DEV system, a tranport request that had been previously released and transported to QAS/PRD was copied back into the DEV system, over-writing an open change request (and associated lock) on the program.
As a result the object shows as 'Locked' in DEV, but the lock entry is on a 'Released' transport.
I have reviewed tables E070 and E071, and as expected the entries for the program show that the transport was released.
Table TLOCK contains an entry for the program indicating that it is locked under the change request described above, that has already be released.
I logged a message with SAP, and was directed to create a new change request and assign the program to that request. While this does work, and allows me to make corrections and transport them, it does not assign a lock to the new transport, and does not clear the existing lock.
The other comment in the message was that once a transport is released, the only other option is to 'hack the tables', but I am not sure I am ready to go that route.
Has anyone ever encountered this situation, and if so, do you have any situations as to how to clear the lock entry ?
Thanks in advance for any assistance you can provide.
R. Runtz
SAP Support, Government of Manitoba

Hi Robert
You can unlock objects using transaction SE03:
SE03 > Requests/Tasks > Unlock Objects (expert tool)
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

Change and transport system not configured

hi
Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
How to fix this?
i appreciate your help in advance. Thanks
Madhu

Hi
After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
STMS is mainlly used for moving objects from one system to other system
Regards
kiran kumar.v

Transport target and transport groups

hi all,
i need to create,transport target and transport groups,wht is the use and how to create.
redards,
AVR

Did you check this help section: http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Can you close the other similar thread?
Regards,
Abhishek.

All Information regarding Change and Transport management System in SAP

Hello Experts,
Iam into Basis . I need all information ,fundamentals and concepts over Change and Transport management system in SAP .Its fundamentals,the way it works ,how requests r transporteded etc. I want more of this information in regards to practical scenario. Plz dont provide help link as iam aware of that. I need good explanatory content ,in your own words shall be appreciated more. If any body has any self prepared good explanatory and procedural matter , tat will be of help.requested to revert at earliest as this is a bit urgent. My Email Id is [email protected]
Useful answers shall be rewarded points.
Thanks and Regards,
Somya

check this link
http://help.sap.com/saphelp_47x200/helpdata/en/d7/8eb9361a75ea43e10000009b38f839/frameset.htm

STO with WM with shipping and transportation process

Hi ,
Can anyone explain the process STO with WM with shipping and transportation?. What are all the config needs to be done for shipping and transportation?
Regards,
abi

<STO with shipping>
[1]
Please set shipping data for the receiving plant and supplying plant.
img -> mm -> purchasing -> PO -> set up stock transfer order -> define shipping data for plant.
receiving plant <> ship to party
supplying plant <> sales area.
[2]
Please assign delivery type and checking rule.
img -> mm -> purchasing -> PO -> set up stock transfer order -> assign delivery type and checking rule.
[3]
Maintain shipping point determination:
[4]
Maintain and assign confirmation control key (if you are using two step STO and want to post GR via inbound delivery).
This is the same as normal PO.
==========================================================
WM and transportation.
This is basically the same as normail WM and transportation.
Once outbound delivery (replenishment delivery) is created, the process is the same as normal outbound delivery.

Creating t.code for ABAP query and Transport it TO Production and run it .

Hi Friends
Thanks for ur reply ,
The requirement is that i want to create tcode for abap query and that query can be regenearted ,
in case of regeneration programe name i got answer programame name will be change, i created and modified query but i saw the same programe name ,,, may be it changed when it is trasnported if so then what ??
and also pls give me solution for asiging tcode for query which is going to be regenerated.
thanks and regards
farukh

Dear Farukh,
As we know,
Query is created in Production server and a corresponding program is generated by System.
What we have to do is just to assign the program to the desired transaction code in Development server and transport it.
If you have any doubts please let me know.
Kindly assign points if you find this info usefull.
Regards,
Lijo Joseph

SAP Query Use and Transport Strategy

Anyone wish to share their experience in the use of SAP Query? We generally have an understanding that we don't want to be giving out this tool to end-users in Production. We would like to create queries, and when we wish to give them out we'll attach t-codes to them and roll them out.
However in practice, this is becoming difficult. An example is where in our gold client we create queries and then we would typically transport to our unit test client. But whenever we do an export, it generates a transport request. Before we are done testing we may end up with 10's of transports for a single query?
Anyone have some ideas on a transport strategy for SAP Query? How about it's use in Production? Our landscape for changes are typically DEV Gold -> DEV Test -> QAS -> PRD. We would ideally like our transport strategy for queries to match what we do for everything else.

HI,
Query objects are transported in different ways according to the query area in which they were created.
In order to know which transport options are available, you must first understand how query objects are created.
Standard Area
Query objects are stored in the client-specific table AQLDB. They are not connected to the Change and Transport Organizer.
Global Area
Query objects are stored in the cross-client table AQGDB. They are connected to the Change and Transport Organizer.
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb467f455611d189710000e8322d00/content.htm
Global area objects can be transported into other systems. Standard area query objects can not only be transported to other clients within their own system, but into all clients of other systems as well. In addition, query objects can be transported from the global query area to the standard query area and back within the same system.Transports are normally performed by the system administrator, not by end-users. For this reason, you need the appropriate authorizations
Check the below links for detailed explanation
Transporting Global Area Objects
http://help.sap.com/saphelp_47x200/helpdata/en/ec/052786a30411d1950a0000e82de14a/content.htm
Transporting Standard Area Objects
http://help.sap.com/saphelp_47x200/helpdata/en/ec/052789a30411d1950a0000e82de14a/content.htm
General Transport Description
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb4699455611d189710000e8322d00/content.htm
Generating Transporting Datasets
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb46a6455611d189710000e8322d00/content.htm
Reading Transport Datasets
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb46e7455611d189710000e8322d00/content.htm
Managing Transport Datasets
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb46f4455611d189710000e8322d00/content.htm
Transporting Objects between Query Areas
http://help.sap.com/saphelp_47x200/helpdata/en/ec/05278ca30411d1950a0000e82de14a/content.htm
I hope this solves your purpose.
Regards,
Vara
Message was edited by:
varaprasad bhagavatula

Transporter No and Transporter Name

Hi ,
I want to get field Transporter No and Transporter Name it was maintained in sale order (Partner Tab).If it is maintained in Text means i can use 'READ_TEXT' function but it was maintained in (Partner Tab).Can you help me which table contain transporter name and transporter no other wise which function module i can use it.
Regards,
K.Karthikeyan.

Hi Karthikeyan,
If it is maintained in the Partner Tab with a partner function, Then you can get the transporter no in field KUNNR from the table VBPA by providing the corresponding Sales order No in VBELN and partner function in PARVW. Use the retrived transporter no in table KNA1 to get the transporter name in NAME1.
Hope this logic will help U.
Regards
Dillip Sahoo

PFCG and transports

Similar Messages

Maybe you are looking for