PFIl missing solaris 10 core installation

Dear Members!
I just installed Fresh Solaris 10 Core installation on X86 machine. Now I tried to configure IP filter but the /etc/ipf/pfil.ap is missing these packages installed
system SUNWipfr IP Filter utilities, (Root)
system SUNWipfu IP Filter utilities, (Usr)
please help me what should i do?
Regards,
Umar Draz

Dear Tears,
here is the answer:
http://forum.java.sun.com/thread.jspa?threadID=5288985&tstart=0
You don't need anymore to load pfil.ap, you need only to configure the /etc/ipf/ipf.conf and then restart the ipfilter service:
svcadm disable -s ipfilter
svcadm enable -s ipfilter
These will work only with new version of Solaris 10, and older Solaris 10 with 120012-14 Patch.

Similar Messages

Sun Fire V490-Internal FC Drives missing in Solaris 10 installation program

Hi,
We have a V490 server that we are attempting to configure, but the internal FC drives are not available to the Solaris 10 installation program.
The OpenBoot SCSI test fails:
{3} ok test-scsi
Testing /pci@9,600000/SUNW,qlc@2
ERROR : ISP2200 RISC engine did not generate expected interrupt.
DEVICE : /pci@9,600000/SUNW,qlc@2
SUBTEST : selftest:loop-tests:inquiry-test:disk-test
CALLERS : (f010f69c)
MACHINE : Sun Fire V490
SERIAL# : 66233440
DATE : 03/27/2012 14:27:32 GMT
CONTR0LS: diag-level=max test-args=
/pci@9,600000/SUNW,qlc@2 selftest failed, return code = 1
but the probe of the SCSI bus does not and displays the drives:
{3} ok probe-scsi
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y
LiD HA LUN --- Port WWN --- ----- Disk description -----
0 0 0 500000e010192d11 FUJITSU MAP3147FC 0110
1 1 0 21000014c320ff73 SEAGATE ST314670FSUN146G055A
How can we fix this problem?
Thanks.
S Kayal
Edited by: 923748 on Mar 27, 2012 10:59 AM
Edited by: 923748 on Mar 27, 2012 11:00 AM

I don't think the test-scsi command is viable for that platform.
The FC disks are "viewed" by the system as external to the SCSI controller, almost as if they were in a multi-pack.
They are FC drives addressed by the chipset as SCSI disks.
Try:
<pre>probe-scsi-all</pre>
Edit:
Which release of Solaris 10 are you trying to install?
Older releases that might be fine for V480's won't work on V490's.
Edited by: rukbat on Mar 27, 2012 2:35 PM

Sun Management Center and Reduced Core Installs

hey all,
I just discovered the Sun Management Center and the tool looks great for the servers I need to manage. However due to security reasons all our servers are installed as Reduced Network Core installs where we then add the minimal extra packages.
At the moment I am still testing everything but I am a bit stuck here and I believe that I might be missing some packages. I can get the server to find the agent but there I cannot load any of the modules. Sniffing the traffic does seem to show that the info is sent ( a list of names I recognise as module names) but the console does not show anything and reports an error unable to load module info.
Is there a full package list that is required to run the management center server and client? The agent runs fine on my desktop but that is a full install.
I already noticed the command ping is required, but am unsure about snmp daemons. What other packages will i need to install? The manual doesn't really give any information on that and seems to start from a full install

Never mind,
The problem was in the firewall who was defragmenting packets. Once I disabled that feature the server worked fine.
Seems just ping is enough to get the installer working.

Solaris 10 installation failure from cd's

Hi All,
I am attempting to install Solaris 10 on my x86 laptop. I run the installation from cd #1 and go through the steps and installation will begin. I am choosing to install the entire distribution and when cd #1 finishes (about 500 mb of the 4000mb) the machine is not prompting for the other cd's. The machine will simply reboot and give "Solaris 10 installation partially failed."
Upon reboot the grub screen appears and it will load and then fail.
Any ideas? Am I missing a step somewhere? Thanks.

Hi All,
I am attempting to install Solaris 10 on my x86 laptop. I run the installation from cd #1 and go through the steps and installation will begin. I am choosing to install the entire distribution and when cd #1 finishes (about 500 mb of the 4000mb) the machine is not prompting for the other cd's. The machine will simply reboot and give "Solaris 10 installation partially failed."
Upon reboot the grub screen appears and it will load and then fail.
Any ideas? Am I missing a step somewhere? Thanks.

Solaris 8 installation problem on an Intel base PC

I'm quite new with Solaris. I got stuck in Solaris 8 installation just at almost the very beginning. After booting up the system from floppy and conituing pressing F2 and selecting booting from CD, I got an error message like:
cannot mount on pci@0; 0/pci-ide@7; 1/ide01/sd@0; 0:a
panic[cpu0]thread=FEC17440 vfs:mountroot
then, the system reboots itself again and again every time it reaches this point. I guess it's a problem with my CD-ROM. But the problem persists even if I change CD-ROM or move CD-ROM from secondary master to primary slave, etc. I also tried to change harddisk, but did no good to the problem. Is there any experienced users who could provide me with some solutions?
I'm using a system with: Pentium 133, 32 MB Ram, 4GB HDD, 3C905TX, ATI Rage II PCI, Matshita CR-587 CD-ROM, Serial mouse and so on. I also tried another system with: P III 450, Asus P3BF, 192MB Ram, Pioneer DVD-ROM, same HDD, and so on. The problem was still there with the latter system. However, I successfully installed Solaris 7 with the latter system before. Why can't it work with Solaris 8?
Thanks a lot for the help.

I've been having the exact same problems on a PowerEdge 500SC. I have managed to get Solaris up and running on the machine, however. I booted the DCA from the floppy disk and installed from the CD-ROM. When the DCA is ready to scan for devices I use the "Specific Scan" option to tell it to look for specific devices. I tell it to scan for all devices in the listing and in doing so the DCA finds ISA-based IDE controllers. After it provides a listing of the devices it found I use the "Device Tasks" option and the "View/Edit Devices" menu item then delete the Bus Mastering IDE controller device. Once the screen comes up to ask for a boot device, the drives will show up as on the ISA controllers.
I have to go through this process every time I boot the machine but I am able to make the system run at least.
I haven't figured out the ACPI problem, yet.
Regards,
Doug

[Solaris 10] Installation problem on nForce4 Ultra - SATA II - raid 0

hi,
Like I was read on HW web page, Solaris 10 should work fine with 'nForce4' (without 'Ultra'),
but on mine mainboard (nForce4 Ultra) instalator was unable to found my array.
I have ASUS A8N-E (nForce4 Ultra) with 2x 250GB Seagate on SATA II RAID 0.
Is it posible to install this OS on 'nForce4 Ultra' or maybe I am doing sth wrong ?

Hi, I have the similiar problems on Solaris 10 installation.
I have a Compaq SR1710 AMD Sempron™ + 1GB RAM. I am trying make it a mini workstation.
However, the installation was never able to throught.
It always stop or freeze on the "dos" screen after I select "interactive" installation.
The last error message I got was something "Skipped rtls01" something.
I am trying to install Solaris 9 now, so far on disc 2.
Very smooth. No problem..
hope someone can give me advise on how to install version 10 on the machine.
BTW, I checked teh HCL. It seems ok, given my machine is very basic.

Not able to add driver update during Solaris 10 installation on IBM x3550

I am facing a problem with installation of Solaris 10 on IBM x3550.
My question is not specific to IBM server.
I am trying to add SAS driver during Solaris 10 installation. I selected option "Apply device driver update" (option # 4). It is asking to insert driver disk. But only showing floppy (f) and cdrom (c).
IBM server 3550 doesnt have floppy drive and I have the driver image only in a USB stick. Unfortunately, Solaris 10 installation is not showing usb device during driver installation.
Is there any way we can add usb device to the driver update disk list??
Thanks in advance.

Does no one have an idea?

Solaris 8 installation in Dell 8100 met "Resource Confilict"

Hello There,
During I installated Solaris 8 in Dell Dimension 8100, I received the warning message:
"Resource Conflict: both devices are added.
NON-ACPI device:PNP0c01
Port 800-8DF, C00-C7F; Memory FFB00000-FFFFFFFF
ACPI device:PNP0C01
Memory: 9FC00-9FFFF, 3f87000-7F86FFF, FFFB0000-FFBFFFFF, FFC00000-FFFFFFFF."
How can I recovery this "CONFLICT".
Thanks very much !!!
Jack

AFAIK, this is a warning and can be ignored. But on dell
systems there a lot of other problems that can prevent
a successful solaris 8 installation (dell keyboard problems,
problems with a panic when the system include a 3com
3c905c NIC, ACPI problems, ...).
See also:
http://groups.yahoo.com/group/solarisonintel/message/26542
Does it crash/reboot when you continue?
Try to boot from the "Software 1 of 2" CDROM and at the
"1 interactive or 2 custom jumpstart" prompt type "b kadb -v"
instead of "1" or "2". In case it crashes while booting the
solaris kernel from cdrom, this should give some usable
error message...

Mini calendar in mail missing after Lion installation

mini calendar in mail missing after Lion installation

>After installing Lion (intel I-Mac 2g ram). My Microsoft Office 2004 no longer runs.
Upgrade to a Universal compatible version of Office or equivalent. http://www.neooffice.org/ is the least expensive alternative, though importing Entourage into iCal, Mac OS X Mail, and Addressbook works best if the data was exported from Entourage while still in Snow Leopard.
>Also, when I select "printer friendly" pages in Safari or Firefox, I get a "missing plugin" message.
When you upgraded, did you make sure that Safari was installed in the Applications folder? If not, you may have to redownload Safari from http://www.apple.com/safari/ as it happens to be the same version. Firefox double check is already Lion compatible. For more on upgrading to Lion, see my FAQ*:
http://www.macmaps.com/upgradefaq.html#LION

Missing Package(s), Installation Corrupted

Un Gusto saludarlos.
Queria pedir su colaboracion,
Descarge las Imagenes de VMware y tengo la licencia DEMO de DMS 5.3, instale dichas maquinas virtuales y no se genero ningun inconveniente, el DMM y en SnS, mas sin embargo al levantar dichas maquinas virtuales se me muestra el siguiente error: "
Missing Package(s), Installation Corrupted, algun concejo que me puedan brindar, intente instalarlo nuevamente en repetidas ocaciones y siempre obtengo el mismo resultado.
De antemano agradezco muchisimo su ayuda.
Exitos y bendiciones.}
Saludos.....
Adjunto imagen de error

Hello jbtb07,
Welcome to the forum! After almost two months of trying to sort out an order issue, I can understand why you would be fairly fed up with dealing with this issue. I am sorry to hear that you may not have ever received the headphones, and that you are still trying to find a resolution to this.
Using the email address you registered with your forum, I was able to locate the order. It appears that a resolution was provided to you, and so I am sending you a private message with further details. You may check your private messages by signing into the forum then clicking the envelope icon in the top right corner of the page.
Respectfully,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Firefox 3.6.3 crashes randomly when used throught SUN Secure Global Desktop. I have a Solaris core dump. Is there a way to get the dump read?

Running FF 2.0.0.8 with Sun Secure Global Desktop - no issues. Upgraded to V3.6.2, then 3.6.3. Both upgrades failed. Browser randomly crashes at different times, different pages. FF works if directly ssh'ing into application sever. When accessing FF after loging in using SGD, I get random crashes. I have a Solaris core dump generated by FF. Is there anyone that can read/diagnos the core dump?

I have identified the issue and received a 'fix' from the
Oracle Secure Global Desktop support team.
The issue - firefox is crashing when attempting to talk to the sound server which is not active. All activity within the window works fine, except ff hangs the second you move the mouse in to the top level menu.
We disabled the audio under the SGD configuration and that ficed the issue.

Solaris 9/Installation in UltraSparc

Hi,
Im trying to install a Solaris 9 OS in a Sun Fire v240 machine.
First I introduced a clear SCSI HDD and the Installation DVD in the DVD PCI device. Whe I did 'boot' in the OPROM prompt it seemed 'Bad magic nuber in disk label. Cant open disk label package. Evaluating: . Cant open boot device'. When I did 'boot cdrom' it answered 'Boot device: /pci@1e600000/ide@d/cdrom 0,0 f File and args: . Boot: cannot open kernel/sparcv9/unix Enter filename [kernel/sparcv9/unix]:'
Then I formatted the HDD into a ufs format. And now when I do again 'boot cdrom' it answered me 'Boot device: /pci@1e600000/ide@d/cdrom 0,0 f File and args: . Boot: cannot open kernel/sparcv9/unix Enter filename [kernel/sparcv9/unix]:
SCSI HDD and IDE DVD are correctly connected. Installation CD Solaris 9 is original.
I even proved with a original Solaris 8 and Solaris 10 installation CD with the same results...
How can I do a correct installation of Solaris??
Thanks you!!

Q1: Am I doing the right steps?Yes, assuming you made no error writing the iso images to blank CDs. Make sure to use the "write cd from
iso image file" function in you cd writing software.
You can also try to boot from the "Software 1 of 2" CD. It's bootable, too.
Q2: Can I boot the Solaris 9 installation from the A drive, is there any way to create the boot floppy diskette(s) for it?Yes, the CD "Software 2 of 2" contains a 1.44MB boot floppy image, in file /Solaris_9/Tools/d1_image
Write the image to a formatted floppy, using the msdos "rawrite.exe" or "dd.exe" utility.

Hardware Requirement for Solaris 8 Installation

Hi,
Can anyone give me the hardware requirements for Solaris 8 Installation. I need to install the following patches too..
C++Runtime 108434-12
Linker 109147-21
J2SE Solaris8 (patch cluster)
SUNWxwfnt (X Window System platform fonts)
SUNWilof (ISO-8859-1 (Latin-1) fonts)
Please help.
Regards
Aparna

Check out http://docs.sun.com/app/docs/doc/806-1054 for the HCL for the intel version of Solaris 8.
or http://docs.sun.com/app/docs/doc/806-2221-10 for Sparc hardware.

Solaris 10 installation package

Hi,
I wonder if there is an installation version other than DVD or CD?
I went to http://www.sun.com/download/sdl.jsp?5005588c-36f3-11d6-9cec-fc96f718e113=1
and only see DVD or CD ISO version.
I plan to connect an external hard drive to reinstall Solaris 10 to my sun fire X2100. So I guess I need a just software version of Solaris 10 installation.
thanks,
Feng

Thanks the hints.
I successfully unpack the sol-10-u4-ga-sparc-dvd-iso-a file to an external USB drive.
I have a sun fire 2100 box, which is pre-insalled Solaris 10. Since its' OS can't go to root mode, Sun technician suggested me to over write the OS by a fresh Solaris 10 installation.
I am using Hyper terminal software as a terminal console to connect to that Sun box.
In Bios setting, the First Boot Device is "removable". Is it right?
I am trying to use F2 when system is rebooted and that supposes to lead me to install Solaris 10 from my USB external drive.
But my system always go back the preinstalled OS. What is the correct steps to install a new Solaris OS to over write the existing Solaris OS?
thanks,
Feng
Attached is the screen when I try to boot install.
GNU GRUB version 0.95 (608K lower / 1046400K upper memory)
+-------------------------------------------------------------------------+
| Solaris 10 1/06 s10x_u1wos_19a X86 |
| Solaris failsafe |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+-------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, or 'c' for a command-line.
"

Solaris 10 Installation CDs

Hi,
I have downloaded solaris 10 installation CDs from site, verified them with checksums and burnt then into 700MB CDs. When I put the first one into CD-Rom and issue "boot cdrom" it prompt smthing like:
there is no executable file ...
What is the problem?

... In MS Windows ...
I double-click an ISO file.
It launches whatever program might be installed on my computer
that is associated with burning-to-disk (Nero, Roxio, Isobuster, whatever).
I pick a speed that I might want this time, such as 8x, and simply proceed.
It just works.
The program figures it all out for me.
That's how I've burned ISO files from all sorts of sources for the last eight years.
I double-click, and it just works.
Are you sure you downloaded the images for CD's
and not the five pieces of DVD that need to be joined before burning ?

PFIl missing solaris 10 core installation

Similar Messages

Maybe you are looking for