PFIs on E series configured for input, by default?

Are the PFIs on the E series configured, by default, for input?
I work with a 6071E board and am trying to trigger analog acquisition with an external trigger on PFI0/TRIG1, but it's not working.
Of course, there could be any number of reasons for this (especially comedi software...ugh), but I wanted to make sure I don't have to explicity configure PFIs for input to use them as such.
thanks, jon

The lines are configured for input by default. According to Appendix C of the E Series User Manual at system power-on and reset, both the PFI and DIO lines are set to high-impedance by the hardware. This means that the device circuitry is not actively driving the line either high or low.
Regards,
Justin Britten

Similar Messages

Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

Hi All,
Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
Any help would be greatly appreciated.
Thanks in advance.
Samir

Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices. RME will only use HTTPS to fetch VPN concentrator configurations.

How we archieve configuration for Cisco ASA 5500 series appliances

Hi,
We need to archieve configuration for Cisco ASA 5500 series appliances.
We have Cisco works LMS 3.0.1.
Device package installed is 4.2
Any help would be appricated.
Thanks in advance.
Samir

Hi ,
Thanks for your answer.
Right now we are using TACAS to login in to the ASA. That means we need single username and password to login via
Cisoworks. Am I correct ?
Waiting for your reply.
thanks,
Samir

I will be buying the new IMac 27 inch in December. Would like input on the best configuration for photographic and possibly video processing-dream machine!

I will be buying an IMac 27 inch in December. What is the best configuration for photo and possibly video processing.Does one need a Mac Pro? Dream machine!

Just to explain what I just wrote to Laundry Bleach:
Why is there no iDVD on my new Mac?
https://discussions.apple.com/docs/DOC-3673
UPDATE & ADDENDUM:
But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
Poster jhb21939 posted this in another thread:
“when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
In response, Old Toad posted this solution:
“You can still use it one all of your Macs. If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer. After you're done reset the time back to the correct time.” He added this comment:
“It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
I've been able to use the installer even without setting back the date. I just clicked on the Continue button and it would work as expected. For some it would not continue unless the date was set back.”
The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

6602: Want to route a dedicated DIO (0-7) Line configured for output to a RTSI line

PXI-6602: I want to use a dedicated DIO (0-7) line configured for output to trigger all 8 counters on the 6602 card. The counters are configured for two-signal-edge-separation measurement. I Have tried to use Route-Signal.vi to route PFIn (0-7) to RTSI bus with no luck.

You should be able to trigger counters on the 6602 using the Digital Lines DIO (0-7).
Use the Set Attribute VI and set the attribute value type to Enabled and attribute ID to Start Trigger.
Wire the output of Set Attribute Task ID to the Task ID input of the Route Signal VI. Select the start trigger for the Signal Name input, PFI n for Signal Source input and PFI line Number for Signal Source Line Number input. Try this and see if this works.
Regards,
Bharat Sandhu
Applications Engineering
National Instruments."
Penny

Configure analogue input type

Hi,
I'm using a FPGA for PID controling. My signal for AI is grounded to the building. I cannot configure the AI type to be nonreferenced single ended(NRSE). It always become DIFF once I close the dialoge and reopen it. Hope I can get some help here.
Attachments:
FPGA AI settings.JPG ‏66 KB

Did you click on 'Apply Settings'? Also, be sure to compile the FPGA before you open the Window again.
Analog Input Mode Configuration For 783xR Series Boards
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Contract Currency Field not available for input

Dear experts,
I am configuring RE-FX in SAP ECC 6.0 and when i try to create a contract with a currency different from the company code local currency, the contract currency field is not available for input even though in the field status, it is checked as available for input. I want to be able to use a currency for my contracts different from my local currency. Also, havent yet made any changes to the standard field status settings.
Any kind of advice would be appreciated
Many thanks

Hi Severina,
different currencies for RE-FX are introduced with Enhancement Package 2. Therefore you have to implement this enhancement package and activate the business function for Real Estate and the appropriate subfunction to be able to use different currencies.
Hope that this information is helpful for you.
Regards, Franz

Search help for input fields in a screen

Hi,
Pls help me
how to set search help property for the I/O fields in screen in se80?
1. do we want to add any property for search help in the property window?
2.do we want to create a MODULE PROCESS ON VALUE REQUEST ?
PLS tell me how to set search for the I/O field in se80?pls tell me the process?
i want to set the search help for more I/O fields in se80 but all the fields belongs to the same table?
can i create a single search for all these fields and use that for all the I/O fields ?
elementary search help or collective search help?
thanks & regards in advance,
vsnl.

Hi,
Input Help on the Screen
Within the Screen Painter, you can define two types of input help:
1. The FIELD statement with one of the additions VALUES or SELECT.
2. Linking a search help directly to a screen field.
If you link a search help directly to a screen field, it overrides the additions of the FIELD
statement. However, the input check [Page 581] functions of the FIELD statement remain
unaffected.
Input Help in Flow Logic
The following input help methods are obsolete and should not be used. They are still supported
for compatibility reasons.
In the screen flow logic, you can specify a value list for a screen field <f> as follows:
FIELD <f> VALUES (<val1>, <val2>,...).
The value list contains a series of single values <vali>. The NOT and BETWEEN additions for the
input check [Page 581] are not appropriate for input help.
You can also create a value list by accessing a database table as follows:
FIELD <f> SELECT *
FROM <dbtab>
WHERE <k1> = <f1> AND <k2> = <f2> AND...
In the WHERE condition, the fields of the primary key <ki> of the database table <dbtab> are
checked against the screen fields <fi>. The WHENEVER addition, used with input checks [Page
581], is not necessary for input help.
If you have used a ABAP Dictionary reference for field <f>, the selection and the hit list formatting
may be affected by any check table attached to the field.
Attaching a Search Help
Search helps from the ABAP Dictionary can be attached to a screen field [Ext.]. To do this, enter
the name of the search help in the corresponding field in the attributes of the screen field in the
Screen Painter. This assigns the first parameter of the search help to the screen field. It is only
possible to place a value from the hit list onto the screen.
Input help on a screen.
REPORT DEMO_DYNPRO_F4_HELP_DYNPRO MESSAGE-ID AT.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
602 April 2001
Cancel
Airline
Flight number
Screen field with search help
Input help in the flow logic
The input fields have been adopted from the program fields CARRIER and
CONNECTION. The function code of the pushbutton is CANCEL, with function type
E. The search help DEMO_F4_DE with the search help parameter CARRID is
assigned to the screen field CARRIER. The search help uses the database table
SCARR.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
FIELD CARRIER VALUES ('AA', 'LH').
FIELD CONNECTION SELECT *
FROM SPFLI
WHERE CARRID = CARRIER
AND CONNID = CONNECTION.
When the user chooses the input help for the individual fields, the following input
help is displayed:
For the Airline field, the search help displays the names of the airlines and places the airline
code in the input field for the chosen line. If the airline code is not one of those listed in the
VALUES list of the screen flow logic, the input check triggers an error message in the PAI
event. So the search help overrides the VALUES addition for the input help, but not for the
input checks. This is therefore not an appropriate place to use the VALUE addition.
For the Flight number field, the flow logic displays the selected entries from the database
table SPFLI and places the selected line in the input field.
Regards,
Bhaskar

ISE 1.2, Supplicant configured for 802.1x but need to MAB

I posted this yesterday but deleted the thread thinking I had fixed the issue - alas I was wrong. In summary I have a scenario where I am doing wired 802.1x and also wired MAB/CWA. The issue is that a certain number of external/BYOD hosts have supplicants configured for 802.1x at their "home" organisations which for obvious reasons can't authenticate on this network. The idea is that MAB and CWA become a fallback but these hosts in question don't efficiently fail to MAB.
If the host has validate server certificates enabled (and doesn't have our root selected) then 802.1x fails and goes to MAB as per the tx timers etc. Hosts that don't validate certificates essentially fail authentication, abandon the EAP session and start new... this process seems to continue for a very long time.
Does anyone have any similoar experiences and if so can you provide some info? I am looking into tweaking 802.1x port timers to make this fail quicker/better but am not confident this will fix the issue.
Thanks in advance

Maybe the held-period and quite-period parameters would help. I would not change the TX period to anything shorter than 10 seconds. Every cisco doc that I have ever seen has said this same recomendation and I can tell you from experience you will have devices at times that will authenticate via MAB when you dont want them to if you decrease lower than 10 seconds.
Read this doc for best pratices including the timers listed below.
I hope this link works. http://d2zmdbbm9feqrf.cloudfront.net/2014/eur/pdf/BRKSEC-3698.pdf
If not goto www.ciscolive365.com (signup if you havn't already) and search for
"BRKSEC-3698 - Advanced ISE and Secure Access Deployment (2014 Milan) - 2 Hours"
Change the dot1x hold, quiet, and ratelimit-period to 300.
held-period seconds
Configures the time, in seconds for which a supplicant will stay in the HELD state (that is, the length of time it will wait before trying to send the credentials again after a failed attempt). The range is from 1 to 65535. The default is 60.
quiet-period seconds
Configures the time, in seconds, that the authenticator (server) remains quiet (in the HELD state)
following a failed authentication exchange before trying to reauthenticate the client. For all platforms except the Cisco 7600 series Switch, the range is from 1 to 65535. The default is 120.
ratelimit-period seconds
Throttles the EAP-START packets that are sent from misbehaving client PCs (for example, PCs that send EAP-START packets that result in the wasting of switch processing power). The authenticator ignores EAPOL-Start packets from clients that have successfully authenticated For the rate-limit period duration. The range is from 1 to 65535. By default, rate limiting is disabled.

Error 404: No target servlet configured for uri: +websphere 6.0

My server is running properly, but I got Error 404: No target servlet configured for uri: error while launching my project on web sphere 6.0
see my web.xml and strut-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
id="WebApp_ID"
version="2.4"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>supportPortalWeb</display-name>
<servlet>
<servlet-name>action</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>detail</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>validate</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet>
<servlet-name>OrganizationDataServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.OrganizationDataServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>OrderProcessingServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.ordermgmt.OrderProcessingServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>OrganizationValidationServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.OrganizationValidationServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>ProductValidationServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.ProductValidationServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>ProductGradeServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.ProductGradeServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>action_tmp</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>3</param-value>
</init-param>
<init-param>
<param-name>detail</param-name>
<param-value>3</param-value>
</init-param>
<load-on-startup>0</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>OrganizationDataServlet</servlet-name>
<url-pattern>/servlet/OrganizationDataServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>OrderProcessingServlet</servlet-name>
<url-pattern>/servlet/OrderProcessingServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>OrganizationValidationServlet</servlet-name>
<url-pattern>/servlet/OrganizationValidationServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProductValidationServlet</servlet-name>
<url-pattern>/servlet/ProductValidationServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProductGradeServlet</servlet-name>
<url-pattern>/servlet/ProductGradeServlet</url-pattern>
</servlet-mapping>
<context-param>
<param-name>contextConfigLocation</param-name>
<param-value>/WEB-INF/spring-config/spring-config.xml</param-value>
</context-param>
<listener>
<listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
</listener>
<jsp-config>
<taglib>
<taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-html.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-nested.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-nested.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-template.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-template.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-tiles.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-tiles.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/epc.tld</taglib-uri>
<taglib-location>/WEB-INF/supportportal.tld</taglib-location>
</taglib>
</jsp-config>
<resource-ref>
<res-ref-name>jdbc/SupportPortalDataSource</res-ref-name>
<res-type>java.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>
     
     <data-sources />
     
     <form-beans>
          <form-bean name="signOnHandlerForm" type="com.harcourt.supportportal.struts.signon.actionform.SignOnHandlerForm" />
          <form-bean name="signOffHandlerForm" type="com.harcourt.supportportal.struts.signon.actionform.SignOffHandlerForm" />
          <form-bean name="updatePersonForm" type="com.harcourt.supportportal.struts.sample.actionform.UpdatePersonForm" />
          <form-bean name="searchPersonsForm" type="com.harcourt.supportportal.struts.sample.actionform.SearchPersonsForm" />
          <form-bean name="updateProductForm" type="com.harcourt.supportportal.struts.product.actionform.UpdateProductForm"/>
          <form-bean name="searchProductsForm" type="com.harcourt.supportportal.struts.product.actionform.SearchProductsForm"/>
          <form-bean name="searchOrganizationForm" type="com.harcourt.supportportal.struts.mdr.actionform.SearchOrganizationForm"/>
          <form-bean name="updateOrganizationForm" type="com.harcourt.supportportal.struts.mdr.actionform.UpdateOrganizationForm"/>
          <form-bean name="exportOrganizationForm" type="com.harcourt.supportportal.struts.mdr.actionform.ExportOrganizationForm"/>
          <form-bean name="exportProductForm" type="com.harcourt.supportportal.struts.product.actionform.ExportProductForm"/>
     </form-beans>
     
     <global-exceptions />
     
     
     <action-mappings type="org.apache.struts.config.SecureActionConfig">
          <action
               path="/start"
               type="org.apache.struts.actions.ForwardAction"
               parameter="loginRendererDef"/>




          <action path="/product" type="org.springframework.web.struts.DelegatingActionProxy"
                    name="updateProductForm" parameter="method" scope="request" validate="false">
               <forward name="success" path="productInputDef"/>
               <forward name="failure" path="productInputDef"/>
          </action>




          <action
               path="/report"
               type="org.apache.struts.actions.ForwardAction"
               parameter="reportIndexDef"/>
          <action
               path="/user"
               type="org.apache.struts.actions.ForwardAction"
               parameter="userIndexDef"/>
          <action path="/login" type="org.springframework.web.struts.DelegatingActionProxy" name="signOnHandlerForm" scope="request" input="loginRendererDef" validate="true">
     <set-property property="secure" value="false"/>
          <forward name="success" path="loginLandingDef" />
          <forward name="failure" path="loginRendererDef" />
</action>

     <action path="/updatePerson" type="org.springframework.web.struts.DelegatingActionProxy" name="updatePersonForm" scope="request" input="productInputDef" validate="true">
     <set-property property="secure" value="false"/>
          <forward name="success" path="personIndexDef" />
          <forward name="failure" path="personInputDef" />
</action>
     <action path="/searchPersons"
               type="org.springframework.web.struts.DelegatingActionProxy"
               name="searchPersonsForm"
               scope="request"
               parameter="method"
               validate="true">
     <set-property property="secure" value="false"/>
          <forward name="success" path="personIndexDef" />
          <forward name="failure" path="loginRendererDef" />
</action>
     
     <action path="/updateProduct" type="org.springframework.web.struts.DelegatingActionProxy"
               name="updateProductForm" parameter="method" scope="request" input="productInputDef" validate="true">
     <set-property property="secure" value="false"/>
          <forward name="success" path="loginLandingDef" />
          <forward name="failure" path="/product.do?method=createOrUpdateProduct" />
</action>
<action path="/deleteProduct" type="org.springframework.web.struts.DelegatingActionProxy"
               name="updateProductForm" parameter="method" scope="request" validate="false">
     <set-property property="secure" value="false"/>
          <forward name="success" path="loginLandingDef" />
          <forward name="failure" path="/product.do?method=createOrUpdateProduct" />
</action>
<action path="/searchProducts"
               type="org.springframework.web.struts.DelegatingActionProxy"
               name="searchProductsForm"
               scope="request"
               parameter="method"
               validate="true">
     <set-property property="secure" value="false"/>
          <forward name="success" path="productSearchDef" />
          <forward name="failure" path="loginLandingDef"/>
</action>
<action path="/loadProducts" type="org.springframework.web.struts.DelegatingActionProxy"
          name="searchProductsForm" parameter="method" scope="request" validate="true">
     <forward name="success" path="productIndexDef"/>
     <forward name="failure" path="userIndexDef"/>
</action>
<action path="/exportProduct" type="org.springframework.web.struts.DelegatingActionProxy"
          name="exportProductForm" parameter="method" scope="request" validate="true">
          <forward name="failure" path="loginLandingDef" />
</action>

<action path="/searchOrganization" type="org.springframework.web.struts.DelegatingActionProxy"
          name="searchOrganizationForm" parameter="method" scope="request" validate="true">
     <forward name="success" path="orgSearchDef"></forward>
     <forward name="failure" path="loginLandingDef"/>
     </action>
<action path="/organization" type="org.springframework.web.struts.DelegatingActionProxy"
          name="updateOrganizationForm" parameter="method" scope="request" validate="false">
     <set-property property="secure" value="false"/>
          <forward name="success" path="orgInputDef" />
          <forward name="failure" path="loginLandingDef" />
</action>
<action path="/loadOrganizations" type="org.springframework.web.struts.DelegatingActionProxy"
          name="searchOrganizationForm" parameter="method" scope="request" validate="true">
     <forward name="success" path="orgIndexDef" />
          <forward name="failure" path="loginLandingDef" />
</action>
<action path="/updateOrganization" type="org.springframework.web.struts.DelegatingActionProxy"
          name="updateOrganizationForm" parameter="method" scope="request" input="orgInputDef" validate="true">
               <forward name="success" path="/loadOrganizations.do?method=loadOrganizations"></forward>
               <forward name="failure" path="/organization.do?method=createOrUpdateOrganization"/>
          </action>
          <action path="/exportOrganization" type="org.springframework.web.struts.DelegatingActionProxy"
          name="exportOrganizationForm" parameter="method" scope="request" >
          <forward name="failure" path="loginLandingDef" />
</action>
     </action-mappings>
     
     <controller>
          <set-property property="processorClass" value="com.harcourt.supportportal.struts.common.action.SupportPortalRequestProcessor" />
     </controller>
     
     <message-resources parameter="com.harcourt.supportportal.resources.ApplicationResources" />
     
<plug-in className="com.harcourt.supportportal.tiles.SupportPortalSecureTilesPlugin">
     <set-property property="definitions-config" value="/WEB-INF/tiles-def/tiles-defs.xml" />
     <set-property property="httpPort" value="80"/>
<set-property property="httpsPort" value="80"/>
<set-property property="enable" value="false"/>
<set-property property="addSession" value="false"/>
</plug-in>
     
     <plug-in className="org.springframework.web.struts.ContextLoaderPlugIn">
     <set-property property="contextConfigLocation" value="/WEB-INF/spring-config/spring-config.xml"/>
     </plug-in>
</struts-config>

If your EAR has actually started, try this:
http://publib.boulder.ibm.com/infocenter/wasinfo/v6r0/index.jsp?topic=/com.ibm.websphere.zseries.doc/info/zseries/ae/xrun_jvm_sendredirect.html
If you are not on z/OS, the link is actually under server->server infrastructure->Java and process management->environment entries
for setting the property

Process flow with configuration for online payment of vendors

Dear friends,
I need the process flow with configuration for online payment to vendors through rtgs or neft.
Please help me in this regard. One of my client wants to implement online payment process instead of cheque payment.
thanks and regards
satya

1) Payments are initiated at the corporate SAP System using APP and converted into IDOC
Could you please tell me the steps in converting the app into idoc.
There are standard Idoc used for the same , for APP it would be PAYEXT, You need to use this Idoc type.
You define the EDI payment method and assign the program in FBZP (RFFOEDI1)which would created payment medium.
i believe in the app we will create the proposal and run the payment run, after payment proposal created what are the config steps involved in createing the payment run. for example for checque payment we will maintian variant for cheque printing.
The payment run config is done in FBZP, which would include definf check PM and assigning house bank sub gl etc.
2) PI at Client End receives the input through IDOC for the payments
Pl means? and how the client will recieve this idoc what is the set up has to be made?
PI(Process Integration) middleware which will send bank files from sap to bank and vice versa.
3) Bank PI receives the payment and converts the same RTGS/NEFT format
4) Payment Data is received at the Bank RTGS/ NEFT server for further processing
how the payment data will be recieved by bank what is the process?
This is again via PI or any thoird party tool which will send bank files to sap as Idoc, The idoc message type is FINSTA.
or this in SAP you will have to configure the following:
*House bank with partner profile
*Outbound parameters                      what is meant by outbound paramenters and how to create and where to maintian
*Inbound parameters                          what is meant by inbound paramenters and how to create and where to maintian
The outbound and Inbounmd idoc's are the one which we send(PAYEXT) and rec from bank(FINSTA). you create partner profile in WE20 and create partner profile once you create you assign outbound and inbound message types in there.
*EDI Compatible payment methods        how to know about the compaitable payment methods
Please goto house bank FI12 and you will see this in there, assign the PM used.
*APP config                                        i know the app config for cheque payment, for this scenairo any additional settings?
It would be pretty much same, you will have to define the PM used and Payment medium and remaining configuration in FBZP.
*Bank details in Vendor :
You will have to maintain the bank details of the vendor in vendor master.

Custom UI or editor for input-parameter

I think I need to implement a custom UI editor for an input-paramenter. My input parameter is really a HashTable. I'd like to present a dialog that allows the user to enter any number of key value pairs. The optional "editor" element looks promising because it allows you to specify a ui-component. I have searched and searched for sample code, but haven't found any. Would some kind soul please point me to a resource that shows how to implement such as custom UI (whether it involves the "editor" element or not)?
Here's a link to the ui-component element in the reference:
http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/help/wwhelp/wwhimpl/js/html/w whelp.htm?href=000959.html#1548965&accessible=true
Thanks,
Halynn

I appreciate the reply.
I was actually trying to point to another page, although that page may be applicable. Apparently the URL in my browser window was not sufficient to recreate my state in livedocs. I was looking at the reference for component.xml, specifically where it describes an optional <editor> element of <input-parameter>. This <editor> component also has a child called <ui-component>. I haven't found any sample code that uses these two elements.
I need to call my component with a Map or Hashtable (an arbitrary set of Key/Value String pairs). This Map needs to be easily configurable in LiveCycle Workbench. I've seen numerous operations that popup dialogs for input-parameters and serialize their data. I was thinking that I will have to implement my own dialog.
It sounds like you are suggesting I can achieve this with a variable and the set value service. I don't quite understand. How would I insert the string pairs?
Thanks,
Halynn

Prerequisites to configuration for ABAP Proxy -???

My scenario is file->XI->R/3(abap server proxy).
Xi and R/3 are 2 seperate business systems
-Abap server proxy created on R/3 business system. R/3 client 550
-Xi client 400.
-SLD is common for both XI and R/3
<b>My question is in reference to the below message thread:</b>
<b>1.I understand all the below configuartaion has to be done on R/3 business system, tell me am I correct</b>
<b>2. are these configuartion needed for <u>client proxy as well as server proxy</u> also?</b>
HTTP_RESP_STATUS_CODE_NOT_OK
The prerequisites to configuration for ABAP Proxy include: (landscape dependent)
1. The business systems should be based on SAP Web AS 6.20 and SAP Web AS 6.20 kernel patch level above 1253
2. You have installed the XI Add-On in each of these business systems as described in the Installation Guide SAP Exchange Infrastructure 3.0
3. The business systems and your central Integration Server are maintained in the System Landscape Directory (SLD).
Configuration required on the Business System:
1. Create HTTP connection in the business system.
Configuration Details:
Technical Setting:
1. Following Inputs are required for technical setting
1 Connection Type: H
2 Target Host: System name
3 Service Number: HTTP Port name
4 Path Prefix: /sap/XI/engine/?type=entry
Logon Security
On the Logon/Security tab page, enter the following logon data:
1 User: XIAPPLUSER (for example); this user should represent the sending business system (see also the SAP XI Security Guide under Service Users for Message Exchange).
2 Password: the password you have specified for this user
3 Client: SAP XI Integration server
4 Language: Language required
2. Configuration Business system as local Integration Engine.
1. Goto Transaction SXMB_ADM
2. Choose Edit --> Change Global Configuration Data.
3. Select Role of Business System: Application system
4. Corresponding Integration server: dest://<HTTPDESTINATION>. Here <HTTPDESTINATION> SAPISU_XID created in step 1. Dest://SAPISU_XID.
5. Under Specific Configuration Data you can specify additional configuration data
1.Select the relevant category under Specific Configuration Data.
2.Choose Change Specific Configuration Data.
For ABAP Proxies, Add the following configuration:
1.Category RUNTIME
2.Parameters: IS_URL
3.Current Value: dest://SAPISU_XID
Configuration of the Integration Engine
3. Connection between Business System and System Landscape Directory
1. Create RFC destination (TCP/IP) LCRSAPRFC and SAPSLDAPI for the SLD connection.
1.Execute transaction SM59 in the business system.
2.Choose Create.
3.Enter at least the following:
1.RFC Destination: LCRSAPRFC
2.Connection Type: T
3.Description: <your description>
4.Choose ENTER.
5.Choose the Technical settings tab page and do the following:
6.In the Program ID field under Registered Server Program, enter LCRSAPRFC
7.This program ID must correspond to a program ID specified in the RFC engine settings of the SAP J2EE Engine on the Integration Server host.
RFC Destination
2. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
Program ID: LCRSAPRFC
Gateway Host: <Integration Server host>
Gateway Service: <Integration Server gateway service>
Number of process: 3
4. Under Repository specify the following:
Application Server: <Integration Server host>
5. Choose Set.
3. Maintain SLD access details in Transaction SLDAPICUST
1. You can reuse this program ID for all Business systems
2. If there is HTTP error during connection, first run transaction SLDCHECK in the Business system. Also check that HTTP connection is working fine.
3. In XI Adapter use HTTP connection rather then giving R/3 input details as this is easier to transport and maintenance
4. One receiver adapter can be used for all Interfaces connecting to a Business system.
<b>Thanks for your reply in adavnce.</b>
KK

2. are these configuartion needed for client proxy as well as server proxy also?
>>>>
the configuration is one time thing and your R3 will act as a server or client according to the data being sent or received.
In R3 a point to be noted is that in SXMB_ADM -> Intg. Engine Confg. -> Role of Business System sud be as a Application System.
Ref: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Message was edited by: Shabarish Vijayakumar

Sld configuration for rfc to soap scenario

Hi all,
The scenario which i am planning to do, describes how the Custom RFC client application in SAP R/3 System invokes a free Web service (that is hosted over the internet) using SAP XI. For our demo purpose, we have used a free web service available on the Internet.
In this scenario we will be using GetQuote method of Web service DelayedStockQuote. This method retrieves the Stock quote for the given Stock symbol. The method GetQuote has an input that takes in two parameters Stock Symbol and License Key and returns the following information.
StockSymbol,
LastTradeAmount,
LastTradeDateTime,
StockChange,
OpenAmount,
DayHigh,
DayLow,
StockVolume,
PrevCls,
ChangePercent,
FiftyTwoWeekRange,
EarnPerShare,
PE,
CompanyName.
Link to web service:
http://ws.cdyne.com/delayedstockquote/delayedstockquote.asmx?op=GetQuote
In this scenario, I planned to create two mappings, first between RFC Request to SOAP Request and second between SOAP Response to RFC Response .
Adapter in sender communication channel is RFC.(RFC Protocol)
Adapter in receiver communication channel is SOAP.(HTTP Protocol)
Result:
On testing this scenario, In the Sender R/3 system we have to Execute the Report program we have created earlier. When the program is executed with Stock symbol it should get the details of that stock symbol from the Web service.
My question here is what would be the sld configuration for webservice.whether it is a Java WAS or third party.If it is a third party or java WAS,what would be the system name and host name.
Any clarification from you all is welcome and will be highly appreciated.
With Regards
Karthik.

Hi,
I would suggest you is to use third party. It is a web service, and does not matter the technology behind it (if it is java, abap, .net, cobol, no difference! it will be described by a wsld).
System name and host name doesn't matter too, you will not use this information in runtime, and you will specify host name and so at integration directory. You can make your standard on it, for example, put the name as DelayedStockQuote and host as http://ws.cdyne.com.
regards.
roberti

My new windows 7 machine and firefox color defaults for input boxes are obscurring the input box on the google search page making google unusable

Under Windows 7 Firefox looks quite different including the default blue for input to question boxes which are white on the xp machines. Normally this is not a problem. But on the Google web page the blue is so bold that nothing can be seen except for a very small portion of the characters (in red) extending below the input screen. This becomes miserable if you try to edit a search stmt or backspace to correct a spelling error. you are quickly lost and need to clear the cache and reload the page.
This problem does not appear using Chrome or IE on the same machine. Nor is it a problem using Firefox 9.0.1 on two other home PC's running XP (there no input box obscures the answer). This seems to be a lot of work.

That can be caused by the "Keystroke protection" in Comcast Constant Guard.<br />
"Configure Anti-Keylogging Settings" -> disable
*[[/questions/874709]]
*[[/questions/870165]]

PFIs on E series configured for input, by default?

Similar Messages

Maybe you are looking for