Pg Number, File path and date automatically printed?
Is there a way to automatically print the page number, complete file path and date at bottom of each page (set to landscape)?
Thanks!
Thanks Carlos,
It looks like the work72a would work if we were using macs, but we're not...
And there is NO WAY my boss will pay $999 for the other one, even if it did work.
So, now I'm open to other suggestions. We have hundreds of clients that we do work for, and our jobs are organized in folders for each client. A lot of clients with the same name but different locations (ie., Fox Meadow OH, Fox Meadow TX), and each has a different folder. The files are named by dept and year (ie., 2012 Glass, 2012 Art). We often access old files (which, there are thousands of, because they have been organized this way for years.) We need to have the client folder on the page along with the file name (hence the file path).
The script that Carlos created is great, but there are too many steps. Open the script, change location and select info to be displayed (3 steps), close script. There are days we access 50 jobs and the script just added 5 plus steps to each job.
Is there a way to use a hot key run a script that will place the info when and where we need it and auto close the script? Or is there a way to display the full path (in the Illustrator tab?) where we can see which folder the file is in and we will manually type the folder? Or does anyone have another suggestion?
Similar Messages
-
Preferences: Code Editor: Printing: Add File Path and Date to Print Header?
Is there a way to add file full path and date to the print file header for a SQL Worksheet when printing from the Code Editor? So, for example, if my SQL worksheet is called MySQL.sql and is saved to C:\Myfiles\SQL_Code\, I'd like to print the full path 'C:\Myfiles\SQL_Code\MySQL.sql' and today's date as part of the print header along with the page numbers at the top of the code. I see a Java preview in the Preferences: Code Editor: Printing window that mentions a "Today" date but I don't know Java and that is an uneditable preview. I have checked the "Print File Header" check box. Is the file header definition stored somewhere in a configuration file and/or is there a way to modify/customize the default file header?
I am a new user to SQL Nav. version 3.2.20.09 Build-MAIN 09.87. I could do this in SQL Navigator but can't figure it out in SQLDeveloper. Thank you.
-CathyHI
First of all,
Unless otherwise you selected some option like page break after/before - both body and header/footer will print on same page in report, so in pdf as well.
If you have difference on report and PDF that you should look into your setup.
If you want more help, please be particular on your issue
james. wrote:
Hi All,
I am using Oracle Report 10g. How can I add header and footer on same page as my body? Right now when a generate a pdf file, it is printing individual pages instead of 1 one page. Please help me.
Regards -
Hi everyone,
I am scheduling reports in Crystal Reports Server. My reports contain the "Special Field" File Path and Name. However, when the report is sent out via CRS, it prints a different location of where the report actually resides. In CRS, how can I make the file path and name field print the actual location of the report file rather than a rogue location?
Thanks in advance,
Zack H.Does anyone have any advice on this issue?
Thanks in advance,
Zack H. -
How to print file name and date on document
How can we print the file name and date, like in the old days, on a document as a header or footer?
Not the print dialog for iWork but in the app itself. Here is Pages:
Regards,
Colin R. -
Specify the output file path and print name when printing pages
hi,
how can i Specify the output pdf file path and print name when i am using the function PrintPagesSilent from AcroAVDoc Object.
My Code :-
Acrobat.AcroAVDoc doc = new Acrobat.AcroAVDoc();doc.Open(path,
"temp");Dear Irosenth,
i try with different format (doc, docx, xls, jpg, bmp and txt) and it working successfully, but it give an random name for the file which saved in default folder for Adobe PDF print.
you can use the following function:
private void PrintPDF(string[] inputfilepath){
foreach (string path in inputfilepath){
Acrobat.
AcroAVDoc doc = new Acrobat.AcroAVDoc();doc.Open(path,
"temp");
Boolean v = doc.PrintPagesSilent(0, ((Acrobat.AcroPDDoc)(doc.GetPDDoc())).GetNumPages() - 1, 0, 0, 1);doc.Close(1);
and calling it by the following code:
PrintPDF(System.IO.Directory.GetFiles("c:\\t\\printjob"));
copy all files that you want to convert in side the mentioned path and run it program, then check the defualt print path for Adobe PDF printer.
test it and reply me. thanks again -
adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?
I want the capability of adobe reader to just run on one screen.I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html -
File Path and Name field does not display correct path
We are using Crystal 2008 along with VS 2005. We embed the special "File Path and Name" field inside our report and it displays the correct path when viewed inside Crystal reports:
C:\Program Files\reports\Chart.rpt
When run through the web and viewed in the DHTML viewer, the file name and path appear as follows:
C:\Windows\TEMP\Chart {02152A43-3339-4C03-A50A-E281E1D391AF}.rpt
How can this be corrected?
Thanks in advance for any assistance.This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek -
Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success? -
Get (variable) file path and name in a text element
How do you get the (variable) file path and name in a text element (label) in LCD? If you save the PDF and afterwards relocate it, it should update the values. Is that actually possible?
Does anyone have any advice on this issue?
Thanks in advance,
Zack H. -
"File Path and Name" field not displaying correctly
Post Author: DaveWoo
CA Forum: General
Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- DaveThis is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek -
Function module for logical file path and name
Hello all,
I am wondering is there any function module available to translate a logical file path to a physical file path and a logical file name to a physical file name? Thanks a lot!
Regards,
AnyiPlease check the FM FILE_NAME_GET.
CALL FUNCTION <b>'FILE_GET_NAME'</b>
EXPORTING
logical_filename = 'ZDELCHKREP'
parameter_1 = it_cntry-cntry
IMPORTING
file_name = l_file
EXCEPTIONS
file_not_found = 08.
CALL FUNCTION <b>'FILE_GET_NAME_USING_PATH'</b> EXPORTING
logical_path = 'ZDELCHKREP'
file_name = l_file
IMPORTING
file_name_with_path = l_file.
Message was edited by: Anurag Bankley
Message was edited by: Anurag Bankley -
File name and Date Display as an obj not the data
All,
The issue that I am having is that when I view a Visio file hosted on SharePoint. The file was created in Visio 2007 and when it is opened by Visio 2007 and Visio Viewer in SharePoint. The file name field object and date
modified object show the information. The issue is when the file is opened by a device that has Visio 2010 the information does not show. Is there something that I can do for these users to have it show correctly.Hi,
Which way did you open the Visio 2007 file in SharePoint?Opened it in the browser or downloaded it to open? I had test in my environment. Insert a text box>Add a data/time field, it worked fine both in Visio 2007, 2010.
Thus, let‘s do some test to narrow down the issue’s reason.
1.Download the Visio 2007 file and open it with Visio 2010.
If it worked fine, the issue seems more related to Visio object and sharePoint connection.
If it does not display the information in Visio 2010 by a device client, the issue was more related to Visio 2010 client.
2.Create a new drawing included file name and Date
field in Visio 2010.
If the new drawing displays correct, the issue is more related the original, please try to repair the file or re-create the file name and Date filed.
If the new drawing still displays incorrect, please try to start Visio 2010 in safemode, some third-party add-ins my be casued the issue.
If the issue still exists, try to repair Visio 2010.
Regards,
George Zhao
TechNet Community Support -
Love full screen view, but my file information and data are showing along the footer. How do I change me settings so this doesn't show?
Thanks!!!!Anne, didn't the answers Frank and I gave in the other tread work? See:
Re: How do I turn of the focus points in Aperture when viewing a photo in a non-thumbnail view? Thanks!
Or did you want to know something differently? -
Max length of VI file paths and file names
Hi,
Is there a maximum allowed length of VI file paths and file names in LabVIEW? I'm running LV 6.0.2i on NT and is trying to save a VI inside a LLB and LabVIEW crashes each time. I have also tried to copy the VI from the LLB to a temp folder with the Librarian VI, but LabVIEW crashes as well. The total length of the file path is around 260 characters and I strongly suspect the file path length in combination with LLB because when I use a shorter path the problem disappear. If I use a long path without LLB (just regular VIs) a warning appear "Invalid file name" instead of LabVIEW crashing.
Does anybody know the solution to this problem or must I use shorter filepaths? Perhaps it depends on which platform I am running
LV on?
Sincerely,
Mattias Ericsson"Mattias Ericsson" wrote in message
news:[email protected]..
> Hi,
>
> Is there a maximum allowed length of VI file paths and file names in
> LabVIEW? I'm running LV 6.0.2i on NT and is trying to save a VI inside
> a LLB and LabVIEW crashes each time. I have also tried to copy the VI
> from the LLB to a temp folder with the Librarian VI, but LabVIEW
> crashes as well. The total length of the file path is around 260
> characters and I strongly suspect the file path length in combination
> with LLB because when I use a shorter path the problem disappear. If I
> use a long path without LLB (just regular VIs) a warning appear
> "Invalid file name" instead of LabVIEW crashing.
>
> Does anybody know the solution to
this problem or must I use shorter
> filepaths? Perhaps it depends on which platform I am running LV on?
I believe windows has a 255 character pathname (file+path) limit. We once
had that problem because we had a long filename and a longer pathname.
Moved the directory up a couple levels and problem solved. -
KDE: Setting time and date automatically
I've never been able to set the time and date automatically in KDE time settings. When I check the "Set time and date automatically" and authenticate myself, I always get the error message "Unable to contact time server: .". I'm wondering whether it's an upstream bug or I'm missing some required package? Does it work for you?
matt101 wrote:I don't get it i have installed ntpd using pacman -S ntp . And then after it installed I restarted my computer and i still can't change the time to London and am still getting the "Unable to contact time server" error. Am i misinterpreting this or what? Could somone please explain to me in simple terms how to make the KDE clock show London time?
Have you set ntp correctly?
Also go to http://www.pool.ntp.org/en/use.html you'll have all the answers there.
in short try this:
ntpq -p
If nothing happens you did something wrong, if it does, then it already works just remove ntpd or openntpd from daemon array.
Maybe you are looking for
-
I have issues with SU with my Lenovo t61p Win8Pro x64 [Lenovo System Update build: 2013-4-11 5.02.0011] 29.4.2013 1:31:43 Info 2013-04-29 , 01:31:43 at Tvsu.Environment.EnvironmentManager..ctor() Message: Starting Environment Manager... Info 2013-04-
-
Some users in far-east asia are reporting that 60GB model battery time is 6 ~ 7 hrs for continuous video play back, and 30GB model is showing 3.5 ~ 4 hrs video play time. (Yep, music play time is not an issue at all because it's 10 times of video pla
-
How start Logic using template without 'save as' dialog box?
Hi Is there a way to start-up logic from a template without logic always asking where i want to save my song. I find this very annoying because i don't always have the 'need' to save everything i do. Thanks
-
CrystalDecisions.Enterprise.Desktop.ServerAdmin
Hello, I'm trying to do something similar to: http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/en/BOE_SDK/boesdk_com_doc/doc/boesdk_com_doc/SampleCode70.html#160874 in VB.NET Function GetFileServerSettings(IStore, FileServerId) Dim Se
-
Why do i get a copy of an e-mail when i reply to all using the iPhone?
why do i get a copy of an e-mail when i reply to all using the iPhone? I don't want to be included on the e-mail that I am sending out.