PGA Shot SHARE

PGA Shot SHARE Share your greatest shots, your round spanking best bits, and any of your little proud moments from your days walk wasted. Don't let those elitist pro players put you off! Purple line, spin happy, or whether you have the green grid toggled,, or even those lucky few who 'shot it right in the basket', y'all welcome here Frank. Even if it's one of those times you've knocked around the fringe, buried it deep in the rough, being out of your comfort zone and still managed to keep under 'em *Not sponsored by BOSE

Hi,
Go to your Safari menu bar, click Safari / Empty Cache.
Relaunch Safari and try again.
If that didn't help, from the Safari menu bar click Safari / Preferences then select the Security tab.
Click: Show Cookies. Click: Remove All.
Relaunch Safari and try again.
If that didn't help, in Safari / Preferences select the Advanced tab. Enable the Develop menu. Now from your Safari menu bar click Develop / User Agent and try Safari 4.0.5
If nothing above works, due to recent history with your Mac here: http://discussions.apple.com/message.jspa?messageID=12095507#12095507
Boot from your install disc, run Disk Utility to Verify and if necessary, Repair any errors on the startup disk.
Carolyn

Similar Messages

PGA Shot Tracker

PGA Shot Tracker no longer works in Safari. Since upgrading to Safari 5 Shot Tracker no longer works, but it works fine in Firefox. Can't figure out why this is so.

Hi,
Go to your Safari menu bar, click Safari / Empty Cache.
Relaunch Safari and try again.
If that didn't help, from the Safari menu bar click Safari / Preferences then select the Security tab.
Click: Show Cookies. Click: Remove All.
Relaunch Safari and try again.
If that didn't help, in Safari / Preferences select the Advanced tab. Enable the Develop menu. Now from your Safari menu bar click Develop / User Agent and try Safari 4.0.5
If nothing above works, due to recent history with your Mac here: http://discussions.apple.com/message.jspa?messageID=12095507#12095507
Boot from your install disc, run Disk Utility to Verify and if necessary, Repair any errors on the startup disk.
Carolyn

CIDX -XI-IDOC adapter scenario???????? urgent?? pls help

Hi Frnds,
I want to develop scenario between CIDXXIIDOC..
if any one having documentation about CIDX
any scenario withs screene shots share to me...
share any useful links,
what are challenges i wil face while developing CIDX adapter scenario
anyone help me out.. its very urgeNT......
Regards,
RAJ

Hi,
CIDX Adapter is Chemical Industry standard for data exchange in B2B scenarios. It uses XML formatted in different manner specific to Chemical industry.
In order to use this, you need to purchase the license.
There are xml schemas provided by CIDX for each transaction like Order Create, Order change, shipping instruction etc..
You need to download the once which are required in your scenario and use the same.
For overview of CIDX in general you can visit http://www.cidx.org
This might give u an business scenario -http://www.rexsoft.com/sci/Rex_CPI_XI_Configuration_Testing_Business_Package.pdf
Hope this helps too...
http://help.sap.com/saphelp_nw04/helpdata/en/23/cb22419e2ab167e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f4/622c41eda5f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d5/351941fcdbf56fe10000000a1550b0/frameset.htm
Check this basic guide too..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/915dc712-0b01-0010-a99a-fb2fdfa5ddc2
Check these forum replies too..
CIDX and R/3
Please reward points.
Thanks,
Vijaya.
Edited by: Vijaya Lakshmi Palla on Jun 5, 2008 8:37 AM
Edited by: Vijaya Lakshmi Palla on Jun 5, 2008 8:42 AM

Best practice tunning parameters for tunning ADF apps?

Hi all,
I am tuning our 11g ADF app for around 3 billions (can be up to 10 billions records) and the concurrent connections up to 100. The app is running on a 16 core Intel chip and 8GB of RAM. The Weblogic used Rockit JDK. Any one have this experience please share and help me! I am considering what is the top ten crucial parameters for this tuning. Up to now I just have tunned some parameters from OS layer to app layers:
- indexing for queries
- open cursors, processes and pga memory
- share pool for app module and jdbc pooling.
- heap size of JVM memory only max value 1024 because of 32 bit Windows (Perhaps I must upgrade to 64 bit OSs to use more memory)
The app was tested with Jmeter with only 10 concurrent connection and the test case is logging in and query and logging out. It ran very slow. I found out that the weblogic server did not use CPUs equally (only 1-2 CPus were used)
Thank you and best regards.
Elton Son.

Hi,
maybe this of interest:
http://download.oracle.com/docs/cd/E12839_01/web.1111/e13814/toc.htm
http://download.oracle.com/docs/cd/E15523_01/core.1111/e10108/adf.htm#CIHHGADG
http://www.oracle.com/technetwork/articles/systems-hardware-architecture/tuning-adf-t-series-168445.pdf
http://andrejusb.blogspot.com/2009/08/oracle-adf-tuning-preventing-sql-query.html
Frank

How to: Create same size video frames?

I like to use the effect where I have two different videos that are split on the screen.
Example: a shot of the bride and groom walking down the stairs from the church and then another shot of people greeting them.
I like to have these two shots share 50% of the screen each.
I know how to get the two clips on the screen, but I need a better process for the placement and sizing.
Is there a way to position these shots automatically? Today I have to manually nudge the frames until they look level and adjacent, and the same size.
It's even harder if I have more than two clips. I would love to have a grid that I could place them in, and a preset "template" to get them all the same size easily.
Any advice on how to make this effect a bit easier to accomplish?
1) Make the clips the same size
2) Position the clips evenly
iMac Intel Dual Core, 500gb HD, 1G RAM Mac OS X (10.4.7)

Go into the Motion tab for each clip and set the
Scale and Center points precisely.
How about placing the videos evenly on the screen?
I.e one pic in the upper left corner and the second clip in the lower right.
iMac Intel Dual Core, 500gb HD, 1G RAM Mac OS X (10.4.7)

Ipod nano video i shot need to get off nano and on my computer to share please reply

i have nano 5th gen with video i shot video but now need to share it please help!macbook pro leopard 6.7

Hi,
This is the iPod Touch forum. The iPod Nano forum is at: https://discussions.apple.com/community/ipod/ipod_nano.
---likeabird---

How can I fix a problem with PGA Tour shot tracker?

PGA Tour Shot Tracker will not display for the full field. It appears momentarily and then goes all black. I've disabled FlashBlock, AdBlock, and still no help. It (Shot Tracker) will work for groups and individual players, however.

Hello Meaghan,
Thank you for the details of the issue you are experiencing with iMessage. I recommend the following steps for the issue you described:
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more abouttroubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up orforward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to configure Time-sheet in Project server 2013 please share the doc with screen shot

How to configure Time-sheet in Project server 2013 please share the doc with screen shot
Thanks and Regards, Rangnath Mali

Hi,
Please refer to the following Youtube video and article.
https://www.youtube.com/watch?v=lZWvg4q17JE
https://support.office.com/en-sg/article/Set-up-timesheets-and-task-status-672fa06f-8c4b-4e43-bfbc-4c355d681605
Please don't forget to mark it answered, if your problem resolved or helpful.

How can I share (e-mail) NEF files shot with a Nikon d5100 in Lightroom 4.4?

I am new to shooting RAW NEF and then sharing them in Adobe Photoshop Lightroom 4.4. How do you share (e-mail) NEF files shot with a Nikon
D5100 that have been downloaded into Adobe Photoshop Lightroom 4.4.? Isn't there someway to convert to JPEG for sharing. I have 50th wedding
anniversary photos taken and want to share with family and can't. Thank You for any assistance on this problem.

If you use the inbuilt email option your NEFs would be automatically converted to Jpeg, in accordance with the settings you choose bottom left of the email dialog box (or you can setup your own specific settings).
Alternatively you could export to Jpeg, then attach the exported files to an email outside Lightroom.
Or you could upload them to a web hosting site such as Flickr or Picasa, or maybe use Dropbox or similar.
Bottom line is there are lots of ways of sharing your pictures with your family.

Want to replace 28 mm, Power Shot SD 880 IS ELPH. Main use - toddler pics to easily upload/share.

Need to replace my Water damaged power shot SD 880 IS ELPH. Mainly used taking photos of active toddlers. Liked the kids and pets setting on this camera, although the shutter speed was slow, especially when using the flash.
Want wide angel lens, easy to share and upload photos to iPhone,iPad, my Dell XP Home model windows computer and photo printing sites like Shutterfly and Mpix.
Confused about all the various power shot models and features offered. Please help. Thanks Cookie

Hi CookieJ,
Thank you for posting. I am more than happy to help.
Based on what you are looking for, I recommend the PowerShot SX280 HS or the PowerShot ELPH 330 HS. Both offer a fair amount of zoom, wide angle lens, and built-in WiFi for easily connecting to your iPad, iPhone and home computer. They also have much faster image processors and Canon's HS System. The Canon HS SYSTEM lets you use higher shutter speeds to capture clearer images with reduced noise and blur in a variety of situations. They both use a CMOS image sensor instead of a CCD. This, coupled with the faster image processors, greatly improves tracking, continuous shooting speed, as well as autofocus speed. Feel free to look at both on our website, www.powershot.com.
Additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My video needs to go on a SD DVD single layer-it is 1h 51m long-the only way I can make is fit is encode H. 264-not ideal-I am using the Share option in FCP-native media was shot 980x720...any other way to do this??

My video needs to go on a SD single layer DVD…it is 1h 51m long…the only way I can make it fit is encode H. 264…not ideal…I am using the Share option in FCP…native media was shot 980x720...any other way to do this??

To play on DVD Players, it has to be MPEG2.
It's under 2 hours; I'm surprised it won't fit. If not, get Compressor and lower the bit rate to fit.
The native resolution was 980X720…you mean 960?
It will all be resized to 720X480, which is DVD standard.
Russ

Take and share a screen shots

I watched the video on how to take and share a screen shot, but when I hold down the volume down and power key, it doesn't do it! What am I doing wrong? Can anyone here help? Thanks!

mrpearsoy,
Thanks for the answer, but I guess I'm not coordinated enough. I've specifically got the RAZR HD and this is my first smartphone. Yes I know it has taken me a while to join the rest of the world. LOL Just trying to figure things out... All I end up doing is bringing up a 'phone option' menu that shows Silent mode, airplane mode, sleep, and power off...Any tips on how you press and hold the buttons at exactly the same time?

HT4589 How can I share a video shot at 60 fps. Quick time error 0 and 50 occur for DVD

Change camera settings to 60 fps and now program will not share to DVD. Getting quicktime error 0 for DVD and error 50 on master file. Seems Quicktime cannot handle 60 fps. Is there a way I can solve this problem? Camera setting will go back to 30 for next project.

No, the issue is not with multicam it's with the DVD export module. The project properties don't match the media properties? That's really not the way to do this, but you've got it finished. If you have Compressor, try exporting a master file to there.
See if this thread helps you
https://discussions.apple.com/message/21774236#21774236

When I go to share an imovie it downloads into theatre and for some reason loses a still shot in my opening image. How do I retrieve this? It's a two minute video.

How do I prevent my imovie from downloading to the theatre before sharing with Facebook, YouTube, etc? It is deleting part of my 2 minute movie. The opening screen has a sunsets nd title but on theatre it only has the title and music with a black screen. Help!

Make sure the "Add to Theater box is not checked:
I don't think this can be the reason for the problem with the opening screen though. Can you see the original phot in the event?
Geoff.

How do I share a video taken with my IPhone

I can email or sms short videos, but I shot several longer videos with my 3Gs, did a sync with ITunes, and now I cannot find them. Where would those videos go? How can I edit and/or share them?

Syncing only backs up videos as part of the iPhone backup. You need to import it, see http://support.apple.com/kb/HT4083.

PGA Shot SHARE

Similar Messages

Maybe you are looking for