PGI using Stock with Special Stock Indicator "E". (STO)

Hi,
We are in the process of creating Stock Transfer.
While doing PGI the System is displaying the following message:
Only 0 EA of material 1103DGC22LB 08062009 available
When we executed T Code MMBE, we found the Stock exits with Special Stock Indicator "E".
Is it possible to do the PGI using Stock with Special Stock Indicator "E"?
Or what would be best possible to handle this situation.
Please guide.
Regards,
PK

If the stock has special stock indicator E. then you can see this in MMBe as Sales Order stock. If you dispaly the details, then you can see the Sales Order number and item for which the stock is assigned. Unless there is some reason that you want to take this stock from the sales order (for example the sales order is to be rejected), then you shouldn't take this stock as you will be unable to fullfill the sales order. If you want ot borrow the stock, then you could do a transfer as advised by previous person from sales order stock to own stock and after you get replacement stock transfer some back to sales order stock, to fullfill the order. If you are using MTO then you could also create a new production order assigned to the sales order to make the stock in the special stock segment.
Rgds
Richard

Similar Messages

Stock with Special Stock indicator E, not allowing to perform 261 Movement Type

Hi Team,
Please provide your expert opinion.
Unintentionally, a component was set with value Blank in Individual/Coll. field in MRP 4 view. The component is WM managed, when order was released, Transfer Request was generated & the part list was updated with Account Assignment M for that component. It was showing reference of sales order created for the header material.
After TR was converted to TO, TO was also processed. Now the stock is lying in WM under Special Indicator E, due to which we are not able to perform 261 movement for this component, it throws error
Sales order stock XXXXXX 000010 does not exist
This Sales order is already processed & completed.
We are in deadlock, since process order cannot be closed.
Please suggest how to consume this component against the order or bring back the stock to normal
Regards
ND

Your order for which you want do a 261 movement has information that this material is in sales order xxxxxxx item 000010
now it is essential to know in the very detail what was done in sequence.
As you usually need to clear the situation in the reverse sequence.
Not just movements, as well master data changes.
If we understand the full situation, then it might even be possible to do a short cut.
But it is currently not really known if you have an inconsistency between IM and WM, or just missed some postings in WM (which has not really something to do with the error you have)
We do not know how the to be situation should be
And for the as-is we have only knowledge about the error message, but no details to previous movements which lead to this situation.
And we have no info about the current book stocks to make a clear suggestion.
Some situation require detailed analysis, a proposal made just out of the blue can cause an even more difficult situation and a longer way to clean it up.

ME2O report with special stock assignment (project stock)

Dear Guru's
Im tring to use ME2O report to monitor the stocks of subcontracting. In my business we have special stocks (project stocks).
When I run the report it does not give the subcontracted stocks with project assignment.
Am I doing something wrong or is there any otherway to achive this. I want to monitor the subcontractor stocks (with special stock assignment of project)
Thanks in advance
Rupesh

can you explain this scenario a bit more
subcontracting stock is stock type O, project stock is stock type Q
I dont think one stock can have 2 stock types
And ME2O is monitoring stock type O, not Q.

Movement type 313 and 315 with Special stock indicator Q requirment

Hi Gurus,
We have the business requirement to use the Mvt 313 and 315 with special stock Q (two step stock transport for storage Location to storage location transfer). But when we are trying to use the t-code MB1B with MVt 313 with Q its not available. We know its because of SAP standard.
Also we suggested to use the Mvt 411 Q but users wants the 313 /315 with Q from moving the project stock by storage location to storage location and received the update as below.
We have looked into the option of transferring the project stock to plant stock. Unfortunately, as well as being transaction-heavy and prone to manual errors, this has accounting implications. So, we need to be able to action the two-step transfer on project stock via the enhancement described in the SAP documentation.
http://help.sap.com/saphelp_rc10/helpdata/en/0f/03df3a89ec880ee10000000a114084/frameset.htm
The link is specific to PM config . Could any one can suggest me how to handle this one to do with 313 and 315 with special stock type Project (Q) to transfer the stock by two step transfer.
Thanks,
Sada

It seems you have to activate business function set LOG_EAM_ROTSUB (transaction SFW5). After that the customizing node will be available:
SPRO > Plant Maintenance and Customer Service > Maintenance and Service Processing > Maintenance and Service Orders > Functions and Settings for Order Types > Goods Movements for Order > Movement Types for PM/CS Orders
(transaction: DI_0MVTPM)
http://help.sap.com/erp2005_ehp_04/helpdata/en/a0/00e93a2876a81ae10000000a11402f/frameset.htm
Edited by: Csaba Szommer on Jan 10, 2012 11:39 AM

Goods mvt with special stock updated in consumption

Hi,
I understand that the goods mvt with special stock indicator such as Sales order stock and Project stock won't updae the total consumption in MD04 or Consumption in MMR, but can anyone kindly explain me the reason?
Thanks.
Nadali

On the SD side, the special stock indicator on a delivery line item is copied from the sales order line item.
And the special stock indicator on the sales order line item is determined from the item category.
If you are referring to the MM side of things, (and based on your description of the use of the 'replenishment deliveries you might be), then there probably are corresponding configuration on the MM side of things.
Matthew
+1 (707) 276-6473

Report by month with Valuated stock and special stock by storage location

Dear All,
I need a report similar to MCBE with stock level (including "storage loc/batch Stock" plus "special stock(Q)") by plant and storage location.
I try it with MCBE tcode, but i only get "storage loc/batch Stock" in column named valuated stock. Also I can obtain that information in MB5B tcode, but I cannot get data by storage location, only plant.
Does anyone know how can solve it?
Thanks in advance,
Sebastiá

Hi,
Use MC.9 T.code.
click on "switch drilldown" and select storage location.
Regards
Hari

Restrict MIGO_GI at movement with Special Stock

Hi,
We need restriction in T-code: - MIGO_GI or MB1A.
In MIGO_GI there restrict GI for cost center with Special Stock
And MB1A there also show Special Stock.
Do you any possibility to restrict movement with Special Stock.
Amit

not exactly. no.
you can restrict the posting of special stock by granting/denying authorisations for movement types but no more. binding the movement type to an obligatory field 'cost center' is not a matter of authorisations, but of configuration - check transaction OMJN/OMJX et all on the how-to. that still would leave open that everybody can choose a random cost-center deliberately, so you have to use an additional enhancement/exit there ...

Movement type 313 and 315 with special stock K.

Hi,
I would like to post a movement type 313 and 315 with special stock k (consignment) but it is not possible. Also i have tried to create a new movement type (OMJJ) coping 313 and trying to set stock special k in somewhere but I couldn't.
it is possible a movement type 313 K or 315 K?
Thanks in advance.
Anna

Hi Anna Barnils ,
Not possible.
Read the below help:
SproMMInventory Management and Physical InventoryMovement TypesClick on the help infront of Copy, Change Movement Types and check movement types 313 / 315
Regards
Ramesh Ch

How to credit customer with special gl indicator

Dear all,
I want to credit customer with special GL indicator H for security deposits from customer. i am using T-code F-02 and using key 19 to credit it but it dose not allow me to credit the customer with special gl indicator.
plz help me?
Regards
Ahmed
Moderator: Please, avoid asking basic questions

Hi,
In down payment how you will debit the salaries.
Only vendor is debited with special gl and Bank is credited.
so are you making the advance payment with the request or directly making the down payment in f-48.
is 7 special GL indicator that you defined, as Standard is A.
Never change the standard transaction types of down payment.
Standard SAP will not allow to Park the payments.
Regards,
Padma
Edited by: Padma J on Jul 17, 2009 1:23 PM
Edited by: Padma J on Jul 17, 2009 1:26 PM

BAPI for posting account with special GL indicator

Hi all,
is there any other BAPI except than BAPI_ACC_DOCUMENT_POST that can be used to post unt with special GL indicator

use program RFBIBL00, by setting the TCODE 'FB01' in the structure BBKPF, but if the transaction FB01 does not support the special G/L indicator you require, it may not be possible. I would still give it a shot.
read the documentation of the program. Additionally, it can be used in conjunction with LSMW for easy setup.
Re: program to upload vendor/customer items with special GL indicator?

Stock Report ( With Special stock Indicator E)

Dear Experts ,
I have done the initial uploading for the stock of finished goods via 561-E for sales order stock ( make to stock ) & 561 for make to order stock .
When i run MC.9 , the system outputs only make to stock materials .
& when i run MBBS the system outputs only make to order stock .
How can i see the entire stock ( make to order & make to order ) in a sinle reprt?

Dear Brother
Please use Transaction code MB52 and check in special stock indicate and run the report all data for special stock will be appear.
Regards

Error while PGI... Special stock 2010 Q for this mat. does not exist

Hi friends,
While PGI system is showing error that particular material, and wbs element special stock Q in sloc 2010 stock does not exist.....
But stock is present.....
I hve checked all relevant things reg..... stock and reservation...
We are facing this issue for PGI for free of charge.........
Plz. help......
Thanks
Navin

Hi,
Please check in MB52 whether the stock of your material belongs to special stock 'Q' + relevant WBS_ID. If your stock level is high enough but the goods are not under the WBS' special stock you cannot post goods isue I guess...
Csaba
Edited by: Csaba Szommer on Jun 9, 2008 5:13 PM

Transfer consignment stock between special stock partners

Dear Friends,
we have a scenario wherein i have two special stock parnter defined for the consignment stock processing. i want to transfer some material from one stock partner to another stock partner.
can someone help regarding this scenario.

Dear rahul patil
To reduce special stock for a particular sold to party, you can use MB1A / 291W so that it will ask for customer code, where you need to define the sold to party. Similarly to add stock, you can use MB1A / 292W. But b4 doing this, check in development and get concurrence with your FI people also for accounting implications.
thanks
G. Lakshmipathi

Not able to Park document with special GL indicator 7-Other Advance to Empl

Dear All
We have defined a Special GL indicator 7 - Other Advance to Employees for Account type K-Vendors.
Allowed transaction type for this special GL indicator is Down payemnt/Down payment request.
Posting Keys for Debit - 29 and Credit 39.
By using this spcial GL indicator and posting key 29 we have posted down payment to employee vendor.
and every month we are posting docuemnt as below thru FB01 for recovery of instalments.
Positing Key SP GL
   39                   7                Employee Vendor               - XXXXX
   40                                     salaries                                 XXXXX
Now as per JSOX audit compliance, first user has to Park the above docuemnt and then to be posted.
While parking the document we are facing below error.
Special G/L indicator 7 is not defined for down payments.
Any one please guide on this.
We have to use above special GL indicator only.
Thanks
RK

Hi,
In down payment how you will debit the salaries.
Only vendor is debited with special gl and Bank is credited.
so are you making the advance payment with the request or directly making the down payment in f-48.
is 7 special GL indicator that you defined, as Standard is A.
Never change the standard transaction types of down payment.
Standard SAP will not allow to Park the payments.
Regards,
Padma
Edited by: Padma J on Jul 17, 2009 1:23 PM
Edited by: Padma J on Jul 17, 2009 1:26 PM

MRP ignore unrestricted stock with project stock

We are using Project Stock. When we generate reservations in Project Stock and run MRP, MRP ignors any unrestricted stock in the plant and always creates Purchase Reqs!
Our MRP settings for the Material Master seem correct (zero saftey stock, etc.).
We will want that, when the material is in unrestricted stock, MRP don't creates the Purchase Reqs for the material with reservation in Project stock.
is It possible ??
Thank's for you regards
Serghei

Serghei,
Yes, that is exactly right.
When you create a requirement for project stock, the system will perform a net requirements calculation against project stock. If it finds no project stock, it will create a purreq for project stock.
Now, you have said that your business requirement is that you want MRP to do its work, and to consider unrestricted stock. The only way you can do this is by creating a reservation against unrestricted stock. Project stock is always considered in individual segments, apart from unrestricted. This is a 'feature' of project planning.
It is possible to create a project order, which contains reservations for components, which are valid against unrestricted stock. However, when you create project reservations manually, they will never consider unrestricted.
Exactly what is your business goal in this effort?
Rgds,
DB49

PGI using Stock with Special Stock Indicator "E". (STO)

Similar Messages

Maybe you are looking for