PH61A-P35 (B3) bios update..........file not found

Hello, ihave problem. I tried to update BIOS, so download bios file, unzip to flash drive, execute bios file on flash drive, and after only wait and system restart. But when he started i can read only red inscription "BIOS Updating ________________ File not found."
Is here any chance to recovery old bios or even bios update?
Please help me, i am very disappointed :(
thanks very much.

Recommend to give the forum's USB method a try;
>> Forum USB Method <<

Similar Messages

3000 J205 Desktop (9686-A12) Bios Update "File Not Found"

Trying to download any updates/instructions for my BIOS results in "File Not Found" Page.
Flash BIOS update (diskette version)
Installation instructions for flash BIOS update (CD ISO image version)
Flash BIOS update (CD ISO image version)
Flash BIOS update (Flash from operating system version)
Installation instructions for flash BIOS update (diskette version)
Installation instructions for Flash BIOS update (Flash from operating system version)
Would prefer the CD ISO in case any problems are encountered.
Thanks
Jon

Thanks for sharing your experience!

H61M-P23 (B3) Bios update file not found

Hi everyone,
I tried to update my bios from version 17 to 19 so I have downloaded the bios file from here fr.msi.com/product/mb/H61M-P23--B3-.html#/?div=BIOS
I plugged my USB stick and moved the .exe downloaded previously into the root of my USB Key. I ran the file then my PC restarted and now I get this message "Bios updating... File not found"
What should I do ? I can't access to the BIOS anymore, I tried a clear cmos but it's the same issue I also tried to insert the CD ROM of MSI but I can't boot from it.
Thanks for you help

Quote from: dragoszdc on 09-July-12, 21:53:18
Hello,
I am having the same problem, but with the H61M-E33(B3) MB. Can anyone help me with that?
https://forum-en.msi.com/index.php?topic=159961.msg1172755#msg1172755

"ipod cannot update - file not found" after getting new ipod

i had my ipod replaced today at the apple store because of a bad HD. Seems like the one they gave me was brand new...anyway after following the restore/charge directions, i went to go plug it into my dock and Itunes is telling me it can't update the ipod because the file is missing. i definitely have the latest update installer, and i even tested playlist syncs with the new ipod and it definitely updates songs/playlists, but after that it gives me the error message about not being able to update.
i ran the last updater, and it says my ipod is up to date.
what's going wrong? i must have done something wrong.

or not....i spoke too soon!
it's doing it AGAIN. after it started updating after restoring all was well, it tried to add my whole library which won't fit.
when it add's a "library selection" instead automatically, it fills up my ipod so that the photos won't update.
then when i re-mount the ipod, it gives me the same old error message again about missing the file required for updating!?!?!?
i wish my preference to "manually add songs" instead of syncing the library would save in Itunes when i restore my Ipod. it's making it impossible for me to get things working properly after restoring....

H61MU-E35 (B3) Updating BIOS....File Not Found Error

I have MSI H61MU-E35 (B3) Motherboard with Intel i3 CPU.
I downloaded latest BIOS File 7680vC3.zip (on web page it's says Version: 12.3 from -> -www.msi.com/support/mb/H61MUE35_B3.html#down-bios
Using Windows XP OS From 7680vC3.zip => Extracted E7680vC3.exe => Placed on USB Drive (I did not format USB Pendrive, and used by just making it empty by deleting files) ==> Ran this exe file on the computer where this motherboard is....
Inside Windows XP, when BIOS Update process started, In a green window, it shown me current BIOS old version and New Version side by side. (I did not given much attention to notedown from which number to which number it's updating).
In Windows XP after BIOS Process completed, it restarted computer (I kept USB File as it in the computer as I had read that, I have to keep USB in computer after restart).
When computer restarted...nothing came on the screen and just blank screen for long time and on the right side on screen bottom corner only letter like: A2 stayed for long long time. I waited for 15 minutes but nothing was happening except blank screen...
So, I restarted computer....and kept USB as it is in the computer....but Nothing comes on the screen...
After I concluded that, something is wrong, to resolve the issue...
--- What Try and Experiments I have done ----------------------------------------------------------------
(1) I placed Restarted computer without USB: and Message comes on the screen is:
BIOS Update is not yet completed, please insert the USB pen drive and reset system.
(2) I refered some forums, and also contacted MSI Support. As suggested, I formatted USB Drive with FAT32 and placed E7680IMS.C30 file (only one file) on USB placed in computer and started computer.. Now Message is coming:
Updating BIOS...... File Not Found..
Note that: E7680IMS.C30 File was given to me by MSI Support Staff as I did not kept Original files during formatting USB PenDrive.
But computer is not looking for .C30 Rom File, Computer is looking for .BIN File
(3) I have remove the battery and waited for 5 min. and placed again, to reset BIOS, but not difference on result or on message...
Renamed: file E7680IMS.C30 to EIVB.BIN
Result: Just Blank Screen with A2 text on right side bottom corner, No other message
In some other same issue post, they recommand to change ROM File name to: EIVB.BIN which worked for others, so I also tried and renamed: file E7680IMS.C30 to EIVB.BIN, in this case, I was able recreate original Issue: When computer boots, Screen stays completely Blank, and on the right side bottom corner, only 2 digit tect comes is: A2. Computer does not give any other message and nothing happens...even I waited for 30 minutes...
Also, by looking at USB Pendrive light, I can tell that, motherboard is reading file on the Pen Drive...
Renamed: file E7680IMS.C30 to E7680IMS.BIN
Result: Message comes on the screen: Updating BIOS...... File Not Found..
(5) What I am thinking is: When motherboard power-ups, it's giving me two different type of Valid message based on if USB is in the computer or not, based on if file name is .BIN or not, so I believe motherboard is still not dead and there are hope to feed the file which motherboard is looking for. But issue how to find what specific file which it's looking for... Even sometime I have seen at screen right side bottom area, 2 Digit numbers are changing just like system is doing internal healthcheck before booting up...
(6) Note that, I would like to put old version file on USB to feed, but one of the biggest issue with MSI is, once you download EXE from their website, to Extract EXE file content it needs to be run on the same motherboard computer, so in my case, if your motherboard is not in bootable cituation then you can not extract any other BIOS File to try...
Please help me...by havin this computer down....I am suffering everyday...
(By profession, I am electronics Engineer and have worked with programming Microcontroller and bootloaders, but in this case, I do not have SPI Programmer to program BIOS chip externally.)

Thank you flobelix and Nichrome.
Quick Result Summary: 128MB USB Key formatted FAT32 with HP Tool, made MS-Dos Bootable and placed EIVB.BIN file given by flobelix, but final result is: Screen comes Blank and only shows "A0" Code at right side bottom corner. nothing else.
Detail
Since Flobelix proviced ROM BIN File, I was too exicited to try it out and here is what I did...
(1) As per Nichrome link for HP USB Format Tool, I installed it on "Win XP" machine, and formatted 128MB USB key by selecting "FAT32" and selected option to make "MS-DOS Bootable" and shown Win98 source files as per the instruction.
-128MB USB drive made bootable with FAT32.
(2) I downloaded EIVB.rar given by flobelix and extracted and copied EIVB.BIN file on USB root.
Inserted USB in MSI and powered up...
As soon as I give power: Imidiately one normal beep and Screen comes completly Dark Blank. No message about "File not found". only at right side bottom of screen, it shows "A0".
I inserted USB key in each and every USB slot, but result is same: Screen stays Blank and on right side corner only "A0" letter.
I given around 3-5 minutes time to see something changes on screen, but no change.
- If I power-up computer without connecting any USB Drive: then message comes on screen that: Bios Update has not completed, please insert USB Key and Reset System.
- On USB Key, If I put ROM File with any other name (except EIVB.BIN) then Message comes: Updating BIOS... File Not Found...
- I have removed battery to give a try for resetting BIOS, but not change.
Question:
(1) Is it possible that, motherboard is looking for specific version of File or some different version of file ? and just staying silent and not complaining for existing EIVB.BIN ?
Here is I experiment: I simply created empty text file (0 Byte) on USB Drive and given name EIVB.BIN and booted up computer and same result: Blank Screen and just "A0" on right side bottom corner.
So, it tells me that, when power is given, the program which executes in motherboard for BIOS, it is not able to identify real or fake EIVB.BIN. I think, it's looking for some specific file and when not found, it's getting confuse on what to do....and not saying anything on the screen....
Has anyone old version BIN file of H61MU-E35 (B3) ?
Is there any trick so I can download older version Packaged EXE from MSI website and extract it ? I can give a try....

"BIOS ME update....file not found " since a P67A-GD65 bios update failed

Hi everyone,
I've decided to post this little message after looking for a solution over the web and over the MSI forum because I've got a problem since the BIOS update of my P67A-GD65 MB.
I've followed the update process for the 4.32 BIOS using an USB key, the update started but did not continue after reboot, and since My PC is out of order
The "BIOS ME update....file not found " message is displayed after lots of booting tries, using plenty of methods.
I've looked and tried all the techniques I could find over the web, I've tried :
-PC with and without SATA drives connected
-the last 4 versions of the bios found on-line, even the original version of my MB before updating (1.19)
-4 different usb keys (from 128 Mb to 4 GB)
-all front and back usb ports
Each time, on each usb key, there were several bios versions, even one renamed to AMIBOOT.ROM for testing the recovery method.
I've also tried to make the keys bootable by using the “MSIHQ USB Bootable” tool with the 1.19 bios (after the boot fix), the usb key appears in the F11 boot menu but when I select it, the PC boots but still shows me the "BIOS ME update....file not found " message.
I've also tried a clear CMOS with several power off.
I've also tried to burn a CD containing only a AMIBOOT.ROM file, and to boot on it, but same problem occurs.
In brief, it seems that my PC does not recognize my Key's content, whatever it is.
I've you got an idea to help me ?
Last precision, the update process that failed was using the 4.3 bios version, but my CPU is a not an IvyBridge .
thanks for your help

HI
I've tried with your file , that's better but not solved
the "BIOS ME update....file not found" has gone but my bios is still inacessible.
I put the usb key (with the decompressed file) and the PC starts, displays the MSI boot logo, and then shows a message for hitting F1 or F2 bla bla bla...
Whatever the key that has been hit (F1 or F2, and only the first time), the pc boots again and again after displaying the boot logo, followed by a 30 seconds black screen.
If I remove the key, I've got a message that says I have to put a key on an usb port, and when I put back the usb key , the PC starts to boot again and again.
Once again , I'm stuck.
thanks for your help

H61M-P21 (B3)Updating Bios File not found

Tried to up date my H61M-P21(B3) Motherboard using the 7680vJ0.exe file on a usb stick from the MSI web site Version 19.0 Failed to update now can not get in to bios setup and just get a message.. Updating BIOS..................File not found
Can some one send me a link to the file I need to put on the usb stick? or email me the file please? All I have on the sitck at the moment is EIVB.BIN 7680vJ0.exe and a folder called XPELXR2X that is empty.Or do I have to rename the EIVB.BIN to somthing?
Cant acess the biose menu or the boot device menu so Im stuck any help would be very much appreciated...sorry think I posted this in the wrong section before
Thanks Tony

Quote from: oztony on 23-June-12, 16:13:57
Ok formated with hp tool put the 7680vJ0.exe and got updating bios .......bios file not found! no dos prompt if I could get to the dos prompt I thin I could flash maualy with FUDE238.EXE
Yup. That would probably work. I don't know. Not sounding good. Is there a reasonable priced pc shop in your area that has an SPI flash programming device that could flash the chip for you?

MSI H61M-E33(B3) updating bios.........file not found

Hi,
I tried to update the bios MSI H61M-E33(B3) from 10.D to 12.2. After rebooting, i got the message "BIOS Update: ... file not found".
There is something wrong, what could it be?
The following files are on an usb-Stick:
- 7680vC2.exe (Windows-Installer)
- EIVB.bin (MD5: 55a1af369b1db5b180a432a8fa5c7178 )
- IM9T318R (empty directory)
If the stick is missing, i got the message that the bios-update is not finished yet.

If that doesn't work:
>>Use the MSI HQ Forum USB flasher<<
Download the attached archive to your desktop(of any computer)
Install the forum update tool
Use option 1 of the tool and point it at the entire archive.
It will prepare the flash tool to flash, I am not sure if you are getting far enough to use this, perhap try a full cmos clear as well.
If none of these solutions will work, you will need that spi programmer.

H61I-E35 (B3) :BIOS Updating ________ File not Found

Hello.
Yesterday I was flashing my BIOS from Version 5.2 to Version 6.0.
I have downloaded 7677v60.zip file, extracted it to F:\7677v60\E7677v60 (my usb stick)
I have used front USB port.
I have launched E7677v60.exe from F:\7677v60\E7677v60 folder and wait installation to complete. There were notification (Do not unplug your USB stick)
Windows where restarted, then computer started and after some time (approximately 5 - 7 seconds) computer restarted.
After second start, I have a message: BIOS Updating ________________ File not found.
I have tried to shutdown, put my usb stick in rear ports, but it make nothing.
So, please help, how to Update or How to recover my BIOS on motherboard?
And, why this appeared ( I don't unplugged my USB stick all the time of setup and restart)?

Quote from: Freaker on 01-June-12, 16:12:20
Hello.
Yesterday I was flashing my BIOS from Version 5.2 to Version 6.0.
I have downloaded 7677v60.zip file, extracted it to F:\7677v60\E7677v60 (my usb stick)
I have used front USB port.
I have launched E7677v60.exe from F:\7677v60\E7677v60 folder and wait installation to complete. There were notification (Do not unplug your USB stick)
Windows where restarted, then computer started and after some time (approximately 5 - 7 seconds) computer restarted.
After second start, I have a message: BIOS Updating ________________ File not found.
I have tried to shutdown, put my usb stick in rear ports, but it make nothing.
So, please help, how to Update or How to recover my BIOS on motherboard?
And, why this appeared ( I don't unplugged my USB stick all the time of setup and restart)?
is similar, but the model I have H61M-P21 (B3)
have a file on a flash drive "biosEIVB.BIN" of about 4 MB, but still receive the message "File not found"
Help me please

My iTunes wouldn't update and so I tried to reinstall the new version, my computer restarted and when I clicked on iTunes, it said file not found.

I tried to update my iTunes so I could put some songs onto my ios 7 device and it wouldn't update. I would get a fail message. I went to the apple website and reinstalled it. After my computer restarted, I clicked on iTunes and said file not found. I looked everywhere but could not found a working application link. Help!!

Hi Applefan 6968,
If you are having issues updating or reinstalling iTunes on your Windows machine, you may find the following articles helpful:
Apple Support: Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Regards,
- Brenden

When I Update My Nano, I get error message, "file not found"

When I Update My Nano, I get an error message, "file not found, cannot update iPod". I have looked through the manual and tried reinstalling the iTunes program but it still won't update my iPod with music or pictures. PLease help.

Try these basic troubleshooting steps one at a time.
The Five Rs.

File Not Found / Fade Update Failed Error -43

I have been getting two errors all of a sudden when instigating playback in the Arrange window in Logic 9.
File Not Found Result Code -43
and
Fade Update Field Error -43
I have googled information on this and have tried the following:
Used "Save As" and changed the name of the project file
Removed automation at the start of 3 tracks where i have automated in a gradual increase in volume
Gone to the Audio menu and selected "Delete Fade Files"
None of the above have worked. I have not used the crossfade tool to add a fade to the start or end of a track, i have only created a fade effect by using Volume Automation.
There seems to be other people having the same problem but i haven't found any with the -43 error code.
Does anyone know what that code relates to?
Have you any suggestions as to how i can get rid of this error?
Thanks

I recently had issues with a "File Not Found" error, though it was a different code #. (-61, or something similar.)
I was trying to move a track from my old G4 and work on it on my Macbook Pro laptop.
The problem turned out to be related to file permissions.
Logic is not a network-friendly program, and OS X is hyper sensitive to permissions, so to access a file that was originally stored on another computer, I had to do two things:
"Get Info" for the drive (it was not a system drive) that the original file was stored on, and check the box at the bottom:
"Ignore Permissions on This Volume"
From the user account on that computer, I then copied the file from the internal drive to an external firewire drive which also had "Ignore Permissions" checked off in the "Get Info" window.
I could then access the file from my user account on the laptop.
Once I did those steps, the "File Not Found" error no longer appeared.

I have 3.6 & am trying to upgrade to current version. When trying to update didn't work, I trashed 3.6 & tried new install. Keep getting "File not Found" page.

Could not update from 3.6 (said I was not authorized). Tried trashing 3.6 and accompanying files and do a clean install of new version. When I click to download I am redirected to a Mozilla "File not found" page. From there I try clicking on Firefox and downloading the English(US) for OSX file and it directs me back to the same file not found page. I have tried this several times.

Where are you trying to download Firefox from? You should be using [http://www.getfirefox.com www.getfirefox.com], the official Firefox Download site.

MAX RT Target Update Error nipal.err file not found

when trying to run a test on the daq assistant, receive error stsing that drivers don't match on RT target and host. When try to reinstall NI-DAQmx 7.2.0 get error file not found ...\NI-PAL\1.8.2.3.0\nipal.err. I checked, the file is not there.

Hello,
I don't understand if you get this when trying to reinstall DAQmx on your computer or in the RT box.
I am trying to download the software to the RT target from the host (MAX Real Time Software Install Wizard).
you might want to try uninstalling all the software and then reinstalling it. If it is reinstalling in your computer, I would first try to uninstall the driver and then reinstall it. If that doesn't fix it, you can try upgrading NI-VISA and that should install the latest version of the driver you are missing. Then install DAQmx
I tried to uninstall and reinstall DAQmx on the RT target but receive the nipal.err file not found error (the file it is looking for should be on the host). I tried to reinstall VISA on the RT Target and also receive a file not found error: error reading from local disk visa-eng.err.
So no luck as of yet with the DAQmx
Tom

[Solved] grub2: file not found but booting fine

I just ran grub-mkconfig to update my grub.cfg because I installed E4rat. But now I have a problem: Every entry in grub2 can be booted and E4rat really boosted my boot process so actually everything is fine. But while grub2 is loading it says something like:
Grub 2 is loading...
Welcome to Grub 2!
error: file not found.
error: file not found.
error: file not found.
Now grub shows up and everything is as it should be. When I select Arch it again says "error: file not found." three times and continues with a normal boot process. So basically it's nothing that would brake my system but something seems not right and that's just a huge annoyance.
Here's my grub.cfg just in case:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
set menu_color_normal=light-blue/black
set menu_color_highlight=light-cyan/blue
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 --hint='hd0,msdos5' f7960d1a-77ab-4230-ab43-ff931f0b2175
else
search --no-floppy --fs-uuid --set=root f7960d1a-77ab-4230-ab43-ff931f0b2175
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=1440x900x32
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_GB
insmod gettext
fi
terminal_input console
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 --hint='hd0,msdos5' f7960d1a-77ab-4230-ab43-ff931f0b2175
else
search --no-floppy --fs-uuid --set=root f7960d1a-77ab-4230-ab43-ff931f0b2175
fi
insmod png
background_image -m stretch /boot/grub/archlinux.png
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-f7960d1a-77ab-4230-ab43-ff931f0b2175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 --hint='hd0,msdos5' f7960d1a-77ab-4230-ab43-ff931f0b2175
else
search --no-floppy --fs-uuid --set=root f7960d1a-77ab-4230-ab43-ff931f0b2175
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=f7960d1a-77ab-4230-ab43-ff931f0b2175 ro init=/sbin/e4rat-preload quiet loglevel=3 logo.nologo console=tty1 splash=silent,fadein,fadeout,theme:arch-black
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-f7960d1a-77ab-4230-ab43-ff931f0b2175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 --hint='hd0,msdos5' f7960d1a-77ab-4230-ab43-ff931f0b2175
else
search --no-floppy --fs-uuid --set=root f7960d1a-77ab-4230-ab43-ff931f0b2175
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=f7960d1a-77ab-4230-ab43-ff931f0b2175 ro init=/sbin/e4rat-preload quiet loglevel=3 logo.nologo console=tty1 splash=silent,fadein,fadeout,theme:arch-black
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry 'Windows 7' {
set root='(hd0,1)'; set legacy_hdbias='0'
parttool "$root" boot+
chainloader '+1'
### END /etc/grub.d/40_custom ###
And my /etc/default/grub:
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch Linux"
# Default:
#GRUB_CMDLINE_LINUX_DEFAULT="quiet"
# Splashy boot:
GRUB_CMDLINE_LINUX_DEFAULT="quiet loglevel=3 logo.nologo console=tty1 splash=silent,fadein,fadeout,theme:arch-black"
GRUB_CMDLINE_LINUX="init=/sbin/e4rat-preload"
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
# GRUB_GFXMODE=auto
GRUB_GFXMODE=1440x900x32
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
GRUB_BACKGROUND="/boot/grub/archlinux.png"
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
GRUB_COLOR_NORMAL="light-blue/black"
GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
I haven't updated my grub.cfg in a while because there was no need to.
Thanks in advance for advices.
Last edited by retzu (2012-04-16 14:16:02)

I have the same error message as in the first post. "error: file not found" listed three times when I first choose Arch from the Grub2 menu. The solution linked to by the.ridikulus.rat would not seem to apply as I do not have the locales en* in /boot/grub/locale BTW, I am in the US. The system does boot though.
I just fixed this a few seconds ago and was going to post how, basically I just did "cp /boot/grub/locale/[email protected] /boot/grub/locale/en_US.mo" which seem to do the trick, the reason I didn't fix this sooner is the error only stays up for a very small fraction of a second making it hard to read.
# ls /boot/grub/locale
ast.mo da.mo fi.mo hu.mo it.mo nl.mo ru.mo uk.mo zh_CN.mo
ca.mo de.mo fr.mo id.mo ko.mo pl.mo sv.mo vi.mo
EDIT: I get the same three "error: file not found" messages when I boot Fedora (a multiboot system). This is with grub2 installed from Arch Linux.
Last edited by David Batson (2012-05-02 20:03:41)

PH61A-P35 (B3) bios update..........file not found

Similar Messages

Maybe you are looking for