Phantom Assemblies with component for PDS - SNP.

Hello,
Does anyone have planned a components under phantom assembly? How can we explode the BOM in PDS-SNP.
Is it possible to used PDS for Phantom Assemblies, what have to check and modify?
Thanks in advance.
Dgee

Dear Dgee,
please read followings on sap help about phantom assemly and PDS: http://help.sap.com/saphelp_scm50/helpdata/en/40/57454070eb2571e10000000a155106/frameset.htm
and
http://help.sap.com/saphelp_scm50/helpdata/en/92/b84d40eae76f13e10000000a1550b0/frameset.htm
and
http://help.sap.com/saphelp_scm50/helpdata/en/dc/28c13dd9279710e10000000a114084/frameset.htm
and
http://help.sap.com/saphelp_scm50/helpdata/en/4d/01be3d1abbe913e10000000a114084/frameset.htm
and
http://help.sap.com/saphelp_scm50/helpdata/en/71/513b407b686913e10000000a1550b0/frameset.htm
I hope this helps.
Regards,
Tibor

Similar Messages

Parent with component for SO, AR but Parent for PO

How to use same item number with different display in SO, AR and PO? The parent item only need for PO to vendor but Parent item with detail component items will be needed in SO and AR invoice since when the customer returns the component will know how much for that specific part.

Gordon,
Inventory Master Data indicated item is for Inventory, Sale and Purchase. But, the Production module has Bill of Material setup for this inventory item. When CSR enters this item will show Parent and Component detail and AR Invoice needs to show Parent and each Component price break-down for customer to return any component.
PO item needs to show Parent item (no need for each component items) only for vendor. How to use one Inventory item but display differently in SO, AR and PO correctly is my question.
If the item called ABC for finished goods item and each price is $800 but ABC is the parent item that comes with C001 $100 1pc, D001 $300 1pc and E001 $400 1pc. We want to show ABC 1 pc $800 with detail C001 $100, D001 $300 and E001 $400.
But, in PO we only want to show ABC 1 pc $550 (cost) to vendor without any component item.

Collective Orders with Phantom assembly

HI experts,
Required clarity on following scenario urgently.
Material                                                Proc Type                             Special Proc
A                                                                 E
B(BOM item for A)                                       E                                             52
C(BOM item for B)                                        E                                              50(phantom)
C1(BOM item for c)                                        E                                             52
When we are creating the production order for A,respective production orders for B and C1 is genrated.
Now when we are confirming the production order for C1,GI of c1 to B is happening and also for C! production order it is giving the DLV status.Up to this the scenario working fine.
But when we are confirming the production order for B,the GI for production order A and DLV status for production order B has to happen,BUt it is not happening.
Can anyone throw some light on this. Expecting reply at the earliest.
Thanks in advance.
Regards
LN

Hi
ritesh,
It is not the question of control key.
But the error is coming at the time of goods movement,we can see the description of it in "cogi".
"ERROR IN DEPENDENT GOODS MOVEMENT."
Because For 'c1',After confirming the order for 'C1',it will do the GR for 'C1'and GI of 'C1'to 'B' production order.
Up to this it is working fine.But the same when I am trying for 'B'production order,After confirmation the GR for'B'is not happning And the Issue of B to 'A' production order is not happening.
And in COGI the above error is coming.
I want to know weather this problem occuring because of phantom assembly with collective order.
Hope this will clear the problem understanding.
Regards
LN

Removing Phantom assemblies from Demand (Ord Res/ Dep Req) & CO24

Issue 1) I have the issue that I want to maintain Phantom Assemblies with sp procurement key 50 but I want the components in the Phantom assemblies to show as Ord Res / dep req directly to the Top level item and not to his Phantom?
Is there any way of ignoring the phantoms in the stock requirements list. The business wish to see demand for the procured items coming straight (or linked) to the Top level assembly.
Issue 2) Can anyone show me how get the Sales order on the Missing parts list CO24? It is a field to be used but when I select and it comes on the layout the data is blank ?
Cheers Milton

Phantom Assembly order

Hi
I am working on a scenario where I have to collect dependent requirement of two material under one material. BOM of this materials is same but different physical properties so different matrial code. i am trying with phantom material ...so that i collect requirement for this materials ...club together and make the order for it. is it possible to make production order for phantom material. please suggest any other possible solution for this.
regards
Rajesh

Dear Mr.Rajesh,
Go thorugh this.
I hope you will not be facing any problem with your scenario.
Also
Check with the setting in SPRO - Production - Basic Data -BOM - Item Data -
DefineExplosion types.
Indicator: phantom assembly off
This indicator controls the explosion of a phantom assembly in BOM explosion functions.
Use
Explosion of phantom assembly in standard SAP system
If a special procurement key for a phantom assembly is entered in the material master (MRP 2 detail screen) of the header material of a phantom assembly:
Dependent requirements for the superior assembly are transferred directly to the components of the phantom assembly
Planned orders or purchase requisitions are generated for the components of the phantom assembly
If the explosion type determines that the standard explosion for a phantom
assembly is switched off, dependent requirements are generated for the header
materials of phantom assemblies, as well as the components.
If useful reward points.
Regards
Mangal

Pull list for the component of the phantom assembly

Hi
I am in rem process. while doing the pull list for the fianl product using Entry with bom explosion.
i did not get the components (level 3)for 1 assembly(level 2 ) which is phantom one under the final product (level 1) BOM.
i also maintained the production stor loc for the components and the phantom assmy.
i check the stock in the production storage location . no stock is there in the location.
what is the problem . how to get the component of the phantom in the pull list.

Dear Raj,
If your FERT contains a HALB and inturn this HALB contains say HALB1 which is a phantom assembly
and and another 2 raw materials means,when you execute MF60 For HALB,you will get the 2 raw
materials along with the component's of phantom assembly.
Check and revert back.
Regards
Mangalraj.S

Report for the list of materials with component & assembly scrap

Dear Experts ,
I have been told to generate a report for the materials which are subjected to component and assembly scrap . Please guide me for the same . Many thanks in advance.
Yours
Aman Khan

Dear Aman,
It you are maintaining both assembly scrap & component scrap both in MM you can read MARC table by creating simple query.
Read Field MARC-AUSSS & MARC-KAUSF.
If you are maintaining component scrap in BOM item read STPO-AUSCH.
[Query Creation|How do create query in SAP?]

Problem with Phantom Assembly

Hi expert,
I have question with BOM and production process. In packaging industry, At start we have 8 components for finish goods. but recently, 2 component 0020 and 0030 (example bottle cap and sticker) will issue from warehouse for assembly process before return to warehouse. then re-issue to use for finish goods.
usually component 0020 and 0030 will convert to another component or change to semi-finish goods.i must create this BOM , Routing , and Open Production Order.and change component in finish goods,
if i not create BOM , Routing , and open Production Order. but create new component as semi-finish goods for item from assembly process to use in finish goods BOM as phantom assembly.
how is my resolution, possible or impossible? , will be any problem in the future. any advise is good.
regards,
kittisak.

Hi,
There are 2 possibilities in this case.
If you do not want to make stock of your HALB then make this as Phantom and include the assembly operations (manufacturing operations) in the header level material so that the activities will be captured at the Time of FERT confirmations.
If you want to make a track of the stock for re issue from Warehouse then no other way.
You should maintain it as HALB with BOM nad Routing, Pl. Order and Production Order route to capture the stocks and issue it to FERT production.
Hope this clarifies..
Regards,
Siva

Component allocation of phantom assembly

I have a phantom assembly "X" with its components as A, B, C, D. During component allocation in routing do I need to allocate Phantom Assembly "X" to an operation as well.
Please specify the reason for YES and NO?

Hi
Check the following:
Material components in a BOM that are not assigned to an operation in the routing are automatically assigned to the first operation when you create a production order.
If you have assigned a phantom assembly to an operation in a routing, the system automatically assigns all of the material components in the phantom assembly to the same operation as the phantom assembly when you create a production order.
If you have assigned individual material components from the phantom assembly to various operations without also allocating the phantom assembly, the system assigns the material components that have not been assigned and the phantom assembly to the beginning of the first operation when you create a production order.
Thanks

Planned order is not creating for a phantom assembly

Dear experts
My fert having two semi finished components
first semifinished is assigned with a raw material
And second semifinished is assigned with two different raw material
in material master of second semifinished mrp2 view Special procurement=50
and after running mrp, second semifinished is not getting any planned order or dep requirement all the raw material under this getting planned order
But in my understanding of phantom second semifinished in should not get any planned order?
Am i correct?
Pls advise me where i need to check
Abu Fathiam

Hi,
Phantom assembly will generate planned order for its component when you will maintain:
Procurement type: E
Special procurement type: 50
Also in SPRO: OPPQ BOM explosion
Also check in BOM In basic data tab
In MRP Data screen, check explosion type- are you maintained phantom assembly off? Check it if you want planned order.
If you don't want system generated planned order for your phantom assembly component you should not maintain this indicator.
Regards,
Alok Tiwari
Edited by: Alok Kumar Tiwari on Feb 29, 2012 11:38 AM
Edited by: Alok Kumar Tiwari on Feb 29, 2012 11:39 AM

BOMMAT Idoc for Phantom assembly

I have to send BOM to SAP-ME using BOMMAT Idoc. I would like to know how the Idoc behaves for Phantom assembly.
For header material A, I have 2 components say B & C. C is a phantom (MRP2-Spl Proc Key=50). And C has a BOM with components D & E.
Now I want to generate Idoc for BOM for A. Will the item level segment in Idoc for A will have B &C only or B, D and E. i .e will it skip Phantom component?
Regards
Shiju

Hi,
Your requirement is not very clear.
Assuming that you want to create an Idoc say for BOM(phantom assembly), the following are the steps:
1. Goto WE02 (list of Idocs)
2. Give FINSTA in Logical Message field then, execute.
3. Take the reference of any Idoc with status 53 (Green).
4. Goto WE19 (to create new Idoc with reference)
5. Give the Existing Idoc no. as selected in Point 3, execute.
6. Give all the parameters as per your new House Bank.
7. Click Standard Inbound button and note the Idoc No.
8. Goto WE02, give the Idoc No. as per Point 7, execute
9. The status has to be 53, else look for the error log.
10. Goto BD87 to make corrections in Idoc and execute.
The above steps are at a high level to kick start the creation of Idocs.
Cheers
Chandra

Interchageability for phantom assemblies

Dear Experts,
We have finished product A and have generated PPDS PDS for it.
For PDS of A, one of the several components is Phantom 1, which is a phantom assembly and has components X and Y.
We want to use interchageability of BOM for Phantom1 with Phantom2. Phantom 2 has components X1 and Y1.
That means for producing A, either X and Y together can be used or X1 and Y1 together should be picked(if stock is not available for X and Y while for X1 and Y1 stock is available)
Is there any way we can maintain interchageability / substitution for XY with X1Y1 as a group? Or it is posible to maintain Interchangeability for assemblies Phantom1 and Phantom2 so that BOM will be entirely interchangeable.
Thanks & Regards,
Vaibhav

Mayuresh,
Generally when a production order is created and if the order has Phantom assemblies, it is suppose to explode the BOM of the phantom assembly and create reservation for its components. Is this not happening?
Can you please mention how you have defined that material as "Phantom assembly". Hope you have not used any special procurement key at the BOM Item level details to switch off bom explosion.
Regards,
Prasobh

Mrp for phantom assembly

Dear Gurus
My main item is a phantom assembly the sales order comes for the phantom assembly only.I have got a multilevel bom for this phantom assembly .The bom of the phantom assembly contains the semifinished item. And the bom of the semifinished item contain raw materials.Now while running MRP I dont want any planned orders to be generated for phantom assembly the system should create planned order for semifinished item and purchase requisition for raw material.How can it be done.
Regards
Sandip Sarkar

Hi,
Check the Planning Stratgy: [Planning with Planning MAterial without MTO|http://help.sap.com/saphelp_erp60_sp/helpdata/en/a2/4e799a927d11d1800f00c04fadcb73/content.htm]..
It seems relevant to you Business..
Phantom will carry altogether different meening..
How will you handle the Stocks??
Regards,
Siva

Reservations for phantom assembly

Hi All,
I have a phantom assembly in a process order, on creation of the process order. Reservations are created for the all the material. Is there a possibility to clear the reservations for a 'phantom assembly' before 'TECO' ?
Regards,
PSS

Yes, reservations gets clear at confirmation when 'clear reservation' is ticked. I have case where reservations for phantom assembly exist even after confirmation with 'clear reservation'.

TV tuner Card for Mac with Component input

Hey everyone, I was hoping someone could help me find a good TV Tuner card for my MacBook. I found a few potentials, however I've yet to find one with Component input that would allow me to play my XBox 360 at a resolution of 1050p. This is the resolution of my stand-alone monitor, and with S-Video the resolution would drop into the 400's. Does anyone have any suggestions?
Thanks,
Sean

Does this work with a Mac? Looks like from the screenshots this is only compatible with Vista
I'm also looking for something that also has a coaxle input along with the component input, so that I can watch TV!

Phantom Assemblies with component for PDS - SNP.

Similar Messages

Maybe you are looking for