Phantom Assembly not exploding in production order

Hi All,
We are using phantom assembly as a BOM component.
When we create a planed order from MD03 or MD02 and try to convert this planed order to production order the components of Phantom assembly are not explode in production order. When I tried with read PP master data option it get explode.
Can you please let me know the reason?
Thanks,
SAP PQ

Dear ,
Couple of points on this issue which may help you understand the problem  : Bom Explosion With Phantom Assemblies will happen based on the following set up .
1. You need to maintain the special procurement key-50 for the phantom Assembly
in the MRP 2 View of the material master
2. We can override the Phantom Assembly Setting by defining in SPRO --->
Define Explosion Types so that MRP Creates Procurement Propasals for the
Phantom Assembly itself.ie We can Swith off the Phantom Assembly Settings.
This settting need to be defined in the BOM Item details screen in the Basic
Data Tab Page under MRP Area.
So check in your Bom whether switch off phantom assembly is defined.Make the Explosion Type-Blank
3.Run MRP Single Item - Multi level - Transaction MD02 with Planning Mode 2 : 'Re-explode BOM and Routing'. The Phantom Item will now get exploded correctly in the Planned Order.
4.Check the Validity of the BOM  and planning date
5.Check the MRP4 set up in FG where you have kept the BOM/Routing selection
6.Check wether dependent requirement  material master -MRP4 view -MRP  for Depent Requ should be blank .
Check the above points and come back
Regards
JH
Edited by: Jiaul Haque on Jun 14, 2010 2:15 PM
Edited by: Jiaul Haque on Jun 14, 2010 2:18 PM

Similar Messages

  • Phantom assembly quantity change in production order

    Hello experts,
    We are producing 1 type of goods, but for 2 different customers. each of them has their own specification for packaging. as per system it was decided to not create another finished goods partnumber with additional BOM, but instead we created 2 phantom assemblies in 1 BOM. 1 of them is the main (for customer 1), another one is alternative (for customer 2).
    Now the idea was that whenever Purchasing is maintaining materials in production orders they were supposed to switch quantity from main phantom assembly to alternative phantom assembly whenever goods were required for customer 2.
    We quickly tested the possibility of quantity change on our test server, but not entirely. the thing is, that for some reason you can change phantom assembly required quantity only if it's already has required quantity higher than 0. otherwise the item is greyed out and you can't perform any changes in it.Same happens if you simply reduce required quantity of phantom assembly item to 0. once you do so - the item becomes greyed out as well.
    So, the question is - is it some kind of settings in BOM\MMD that prevents user from changing quantities for phantom assemblies (and if it is - where exactly you can change it), or it's something else (like i dunno, maybe user authorization issue or something).
    Any help will be appreciated.
    P.S. - i know that you can still simply remove entire item from production order and put it back with quantities and etc., but that way of work has higher risk of making a mistake.
    BR
    VE

    Dear ,
    Couple of points on this issue which may help you understand the problem  : Bom Explosion With Phantom Assemblies will happen based on the following set up .
    1. You need to maintain the special procurement key-50 for the phantom Assembly
    in the MRP 2 View of the material master
    2. We can override the Phantom Assembly Setting by defining in SPRO --->
    Define Explosion Types so that MRP Creates Procurement Propasals for the
    Phantom Assembly itself.ie We can Swith off the Phantom Assembly Settings.
    This settting need to be defined in the BOM Item details screen in the Basic
    Data Tab Page under MRP Area.
    So check in your Bom whether switch off phantom assembly is defined.Make the Explosion Type-Blank
    3.Run MRP Single Item - Multi level - Transaction MD02 with Planning Mode 2 : 'Re-explode BOM and Routing'. The Phantom Item will now get exploded correctly in the Planned Order.
    4.Check the Validity of the BOM  and planning date
    5.Check the MRP4 set up in FG where you have kept the BOM/Routing selection
    6.Check wether dependent requirement  material master -MRP4 view -MRP  for Depent Requ should be blank .
    Check the above points and come back
    Regards
    JH
    Edited by: Jiaul Haque on Jun 14, 2010 2:15 PM
    Edited by: Jiaul Haque on Jun 14, 2010 2:18 PM

  • Scheduling parameters are not defined for production orders

    Hi All,
             when i convert the planned order to production order  i got this massage popup coming  Scheduling parameters are not defined for production orders . please let me know this .

    Hi,
    One of major customization steps for the order type is missing. Run OPU3 and maintain settings for the order type you are using. You may copy settings from an older type.
    Regards.

  • Target cost and actual cost not picking in production order

    Hello,
    The target cost and actual cost is not updating in production order when I display it in CO03 in cost analysis.
    Even though we have maintained planned price in KP26.
    Please suggest how it can be populated.
    Best Regards,
    Tapan

    Hi Tapan
    For Target cost
    1. Your std cost must be released before Goods Receipt
    2. There must be goods receipt posted on the prod order
    3. You must calculate variances in KKS1/2
    For Actual Cost
    1. Post Goods receipt and Goods issues
    2. See if any mat movements are pending in COGI
    3. Ensure that operation is confirmed in PP and no entry is lying in COFC
    Regards
    Ajay M

  • GR for production order post to cost center and not to the production order

    Hi all,
    when we post the goods receipt for the finished product against the production order (mov. type 101), the order is not credited with the corresponding stock value. Instead of this, the value accounts to a cost center.
    We specified this cost center in OKB9 (Default account assignment), because if not, we get an error when posting the goods receipt cause of lacking accounting object.
    I can't see why the system does not credit the production order?
    Any ideas?
    Thanks for your time
    Daniel

    Hi Daniel,
    This is the first time i am coming across an issue like this.
    neverthless from a logical front,
    1. Remove Cost center as a valid receiver in Settlement Profile.
    2. Your OKB9 setting are pretty much good. No need to worry about it.  Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
    3. Check the Settlement rule when you have created Production Order. It should have been MAT.
    4. I hope you are creating Production Order with Material (using CO01 and not CO07)
    5. Make sure in OPL8, the default rule in controlling tab is PP1.
    Once all these are fine, i do not see any reason why you will get your probelm.
    Please check and revert back to me if the problem still persists.
    Best Regards
    Surya

  • Goods issue document is not displaying in production order

    Hi Gurus, I am having problem That when I am doing goods issue in MB1A t code the document is posting but it is not displaying in production order.but when I am doing same goods issue in MIGO the document is displaying in Production order.when I am doing same goods issue in another plant with MB1A the document is showing.so where is the problem??is there any setting with plant and T code combination??what exactly is the error??why it is not showing in particular t code in particular plant.Please guide me.
    Thanks in Advance.

    Hi,
    Check in transaction OPL8 for the combination of plant and order type..is the below indicator are activated or not...
    Thanks
    Kumar

  • Actual activity price not updating in production order

    Hi All,
    I am facing one problem, that actual price for activities are not updating in production order while plan price are updated. Earlier both plan and activity prices were getting upadated but now actual price is not updating for any material. I have tried at the same material also but it is not getting updated. Actual hours are updated in confirmation of production order but not price. If somebody could suggest the reason it will be great.

    Dear Nitin,
    Thanx to all for valuable input. Problem is solved.
    Nice to see That your problem is solved
    But Can you let the Forum Members know
    where was the exact problem & how it is solved
    Regards
    Madhu Kumar

  • Material Cost Not Shown in Production Order if planned with MD50

    Hi,
    We have run MRP MD50 for a sale order item ie FERT material which has BOM Items. All the stock of the BOM items is tranfered from Unrestricted Stock to Sales order stock. FERT ITEM planned order is converted to Production Order and all the BOM items sales order stock is issued against PO & Sales order no with Movement Type 261E.
    After confirmation and goods receipt stock of FERT is shown under sales order Stock of Fert Material.
    We can see the cost of operations but cost of materials consumed against the Production order is not displayed in Production order Cost analysis..How material cost can be displayed????
    If i create PO with out refering the sale order that is normal process i can see the cost of materials triggering in Production Order.
    Can we settle the varience when we are planning against sale order???
    Some one Pl help us.
    John

    Dear,
    Check your variant which showes the cost. See the following report
    KKAC - For Sales Order with Assigned Orders  or
    KKBC_KUN - For Sales Order or
    KOB1 - Actual Costs

  • Componant cost not picking in production order

    Hi,
    Componanat cost is not picking in production order, when i m creating plan order to production order in make to order scenario.
    At the same time when i m creating production order by CO01 its working.
    Please let me know whats missing?
    Tara

    Hi,
    Thanks for sharing thoughts.
    Issue resolved.
    (SPRO-Sales and Distribution-Basic Functions-Account Assignment/Costing-Maintain Requirements Classes For Costing/Account Assignment-execute-for req class 040-Account assignment catagory -M & Valuation-M)
    Tara
    Edited by: tara  bhapkar on Jul 7, 2011 2:52 PM

  • Can not delete a Production Order is the Sales order item is rejected?

    Hello everyone,
    I can not delete the production order as the Sales order line item is rejected.
    Does anybody know if any configuration change is required or any work around?
    Thank you,
    BG

    Hi,
    Could you pl. explain how the production order is created?
    Also did you try by choosing Function in the menu (CO02 transaction) & try to set deletion flag or Technically complete?
    If so did you get any error message ?
    Regards,
    Senthilkumar

  • We want the Engg BOM ( usage 2 ) to be exploded in Production Order.

    Hi Gurus,
    We want the Engg BOM ( usage 2 ) to be exploded in Production Order.
    Please let us how this could be done.
    Regards,
    Ram

    Dear Ram,
    1.Check what selection ID is maintained in OPPQ for the plant for BOM selection.
    2.For this selection ID set the first priority to Engg BOM for BOM usage - 2 in OS31.
    Check with this and revert back.
    Regards
    Mangalraj.S

  • 101 movement not happening when production order got backflushed.

    HI SAP Gurus,
    For SKU 101 movement not happening when production order got backflushed, but 261 movement successfully happened. Please let us know any settings need to check?
    Thanks and Regards,
    SHARAN.

    Hi Sharan,
    A 101 movement for the production order takes place when
    - You receive the production order via MB31
    or
    - Confirm the last operation which has PP03 control key
    A backflush is done only for the components called by the production order & not for the header material.
    Hope the above answers your query.
    Regards,
    Vivek

  • BOM NOT Exploding in Sales Order

    Hi,
    I have created Sales BOM in CS01 and now while creating sales order it is not exploding.
    can you please tell me how can i explode the same or why it is not exploding.
    Also one more query, i have created sales orderBOM and have saved it. Now 1 item from it i dont want to deliver. Is it possible? Pricing of this BOM is at Item level.
    Please advise.
    Thanks

    VK,
    The BOM is created for the finished material or semifinished material, for which sales is done. The bom is executed to make sure or find the material availability based on which this materials are passed to production.
    In case of Sales BOM it is composition of materials that makes final or finished material. It is only an information to the customer that finished material is composed of these sub materials. If you go through Sales BOM article you will be clear.  you use ERLA, if the material that you are issuing is completed (here price is calculated at the main item level) or you use LUMF if the material is not completed (here the price is calculated from sub item level).
    So those items are subjected to delivery but not for deletion.
    Regards
    Sathya
    Edited by: Sathya Pavan Yedavalli venkata on Mar 30, 2009 7:56 AM

  • Available QTY is not shown in Production Order for SemiFinished Product?

    Hi
    In Production Order Available Qty value is not shown for SemiFinished product ( Stock is there), but it showing the Available for other rawmaterials in same Prdn. ordr..
    The SemiFinished product is manufactured and its having lot of stocks ..while i am calling this SemiFinished product in other Production order the available qty is not shown.. so how come the end user comes to know that availlable..
    Giri

    Hi Jey
    I will explain clearly so u can come what is hapening For Ex: Item ABC having child item A,B & C.
    when calling the BOM of ABC in Prodn.order its showing the available of A, B & C... But after the production over for the Semifinished product it increases the stock.
    When i am calling this Semifinished Product in other Produciton Order For Ex: Item AZ having Child item ABC & XYZ.
    In this Scenerio it has to show the Available of item ABC whic is semifinished product its not showing,but in the same Production order it showing the available for Other item XYZ which is purchased one .. So this is the nature of SAP or i am doing any wrong....
    Giri

  • MRP-Delivery Schedule for Sales order is not updating in Production order

    Dear Experts,
    I have created Sales order and maintained delivery scheduling, Then Run MRP through MD50,
    We received Planned order then through this we have converted to Prodcution order.
    When we observe the delivery schedule for sales order under assignment Tab in Produciton order which is showing zero instead showing line item of Delivery schedule.
    I am able to see Sales order and Line item but i am not abel to get any delivery schedule line item.
    Please suggest where settings are missing.
    Thanks in advance
    Regards
    Don

    Dear Experts,
    Please provide me solution.
    after Running MD50 transaction against Sales order.
    If I maintained different Scheduling Line Item for First Line item of Sales order.
    The Respective Scheduling Lines should update against Each Production order which has converted from Planned order.
    Thanks in advance.
    Regards
    DON

Maybe you are looking for