Phantom engineer
Way back in July (after several telephone calls to half a dozen different people in two continents, one of which lasted 1 and a quarter hours - but that's another story for the complaints department) I managed to get an engineer booked for Monday 20 August 2012 between 1pm and 6pm to come and replace an old junction box with a new master socket (this, I was informed, is known in the trade as 'Conversion of hard-wired master socket to Linebox and Regularisation of illicit master socket'). BT confirmed this appointment on 18 August 2012 both by email ('Get ready: our engineer's visiting soon') and by voicemail. So, yesterday on 20 August, I 'got ready' and waited...
No engineer.
Shortly after 6pm I telephoned 0800 800 150 (the contact number given on BT's web site for 'tracking an order'). The first assistant couldn't help, but put me through to a second assistant. After some time she informed me that the appointment was confirmed, that an engineer had been assigned, and that the engineer 'was at the exchange' (why?) and would contact me.
No contact.
At 7pm I again telephoned 0800 800 150. A long conversation with two different assistants on two continents proved utterly futile.
I hung up and tried again. The first assistant couldn't help, but offered to transfer me. I hung on in a queue for about 15 minutes and hung up close to 8pm.
This may be the time to part company with BT, unless anyone can get this fixed now.
Well, an engineer turned up, unannounced, at 8am this morning and did the conversion in a half hour or so. He was fine, but didn't appear to be the one 'assigned' yesterday.
I've absolutely no idea whether this is the result of any of my numerous telephone calls or emails to BT, as they simply do not communicate. And this will be the subject of my complaint. I've needlessly wasted time on telephones and computers fruitlessly trying to establish what was happening, when all that was required was a simple call from BT along the lines of 'Sorry, your engineer won't / couldn't make it today, but will be round first thing tomorrow.' You expect, though you do not welcome, non-communication from Banks, the NHS, etc. (add your own baneful institution), but not from an organisation whose core business is, after all, COMMUNICATIONS.
As far as I am concerned, BT are on probation with me. A previous occupant set my house up for cable and I receive begging letters almost daily from Virgin: up to now these have gone straight into recycling, but I'll be taking a closer look next time.
Similar Messages
-
Error in creation of Phantom item bill
Hi Gurus,
We have planned to use phantom item. for that wehave created an item of type: 'option class'. Then created its routing but facing below error when trying to cretae bill for phantom item.
Kindly help me out
Regards,
Ali Raza
APP-FND-01048: Use of this combination restricted by WHERE clause ' ( ((:parameter.query_mode = 2 AND bom_enabled_flag = 'Y') OR (:parameter.query_mode = 1 AND EXISTS (SELECT NULL FROM bom_bill_of_materials bom WHERE bom.organization_id = :parameter.org_id AND bom.assembly_item_id = inventory_item_id AND ((:parameter.bom_or_eng = 1 AND assembly_type = 1) OR :parameter.bom_or_eng = 2) ))) AND (bom_item_type in (:parameter.model_item_access, :parameter.planning_item_access, :parameter.std_item_access, :parameter.oc_item_access) ) AND ((:parameter.bom_or_eng = 1 AND eng_item_flag = 'N' AND NOT EXISTS (SELECT 'X' FROM bom_bill_of_materials bom WHERE bom.organization_id = :parameter.org_id AND bom.assembly_item_id = inventory_item_id AND bom.alternate_bom_designator IS NULL AND bom.assembly_type <> 1) AND (:parameter.eam_type is null OR (:parameter.eam_type in (1, 2, 3)
APP-FND-01388: Cannot read value for profile option FND_INDICATOR_COLORS in routine &ROUTINE.Hi Sandeep,
Thanks for your reply.
I have checked all three possibilities. Item is not Engineering item and already assigned to Org. Also the BOM doesnot exist. Kindly note that I donot have any issue in creating bill of a standard item. We are using phantom item for the first time so tell me if phantom item need some special setup or some profile option to be active etc? I am using below attributes in inventory. Kindly go through it and suggest.
Deviation Factor + 0
Deviation Factor - 0
Shelf Life Days 0
Price Tolerance % 0
Acceptable Rate - 0
Acceptable Rate + 0
Postprocessing Lead Time 0
Planning Time Fence Days 1
Lead Time Lot Size 1
Descriptive Flexfield ---------
Item Status Active
Conversions Both standard and item specific
Forecast Control Consume Forecast
Effectivity Control Date
Service Request Enabled
RMA Inspection Required Inspection not required
Default SO Source Type Internal
Restrict Locators Locators restricted to pre-defined list
Make or Buy Make
Billing Type Material
Cycle Count Enabled No
Check Material Shortage No
Lot Split Enabled No
Lot Merge Enabled No
Lot Translate Enabled No
Lot Substitution Enabled No
Bulk Picked No
Engineering Item No
EAM Notification Required No
Use Approved Supplier No
Taxable No
Allow Description Update No
RFQ Required No
Outside Processing Item No
Equipment No
Planned Inventory Point No
Repetitive Planning No
Build in WIP No
Customer Ordered No
Customer Orders Enabled No
Internal Ordered No
Internal Orders Enabled No
OE Transactable No
Assemble to Order No
Ship Model Complete No
Financing Allowed No
Invoiceable Item No
Invoice Enabled No
Enable Contract Coverage No
Enable Defect Tracking No
Lot Control No lot control
Serial Number Generation No serial number control
Lot Expiration No shelf life control
End Assembly Pegging None
Check ATP None
ATP Components None
Safety Stock Non-MRP planned
Inventory Planning Method Not planned
MRP Planning Method Not planned
Primary Unit of Measure NUMBER
BOM Item Type Option class
WIP Supply Type Phantom
User Item Type Phantom item
Locator Control Prespecified locator control
Tracking UOM Indicator Primary
Pricing UOM Indicator Primary
Reservable Reservable
Restrict Subinventories Subinventories restricted to pre-defined list
Description TEST FG
Revision Control Under revision quantity control
Planning Time Fence User-defined time fence
Inventory Item Yes
Stockable Yes
Transactable Yes
BOM Allowed Yes
Costing Enabled Yes
Inventory Asset Value Yes
Include in Rollup Yes
Purchased Yes
Purchasable Yes
Receipt Required Yes
Create Supply Yes
Shippable Yes
Pick Components Yes
Returnable Yes
Enable Service Billing Yes
Regards,
Ali Raza -
Engineer to Logical Model in SQL Developer EA4 causes problems
I'm working with SQL Developer 3.0 EA4 (Build MAIN-03.97)
Unfortunately I fond out, that it would be impossible to use the function " Engineer to Logical Model" any more after I change the relational model. In datamodeler.log I got the error message line "[AWT-EventQueue-0] ERROR MDBAction - java.lang.NullPointerException" for each time I use the function "Engineer to Logical Model". I try it out with the sample model "sh_cre_all.sql" and with following steps:
1) Import via DDL File – no problem
2) Engineer to Logical Model – no problem
3) Change some attributes in the relational model – no problem
4) Again Engineer to Logical Model – no problem
5) Save, Exit an Open the sample – no problem
6) Again Step 3 and 4 – no problem
7) Add a table via drag&drop from an oracle schema – no problem
8) Save, Exit an Open the sample – no problem
9) Engineer to Logical Model no longer possible!!!
BerndI have experienced similar problems with 'Engineer to Logical model'.
The scenario was following:
Creating Logical model using 'Engineer to Logical model' from existing Relational model.
Modifying the Relational model and 'Engineer to Logical model' again. No exception occured but the Logical model wasn't updated accordingly.
Removing all entities from the Logical model.
Trying to 'Engineer to Logical model' again. No entities were created in the Logical model (even after few tries).
So I got to situation where I was unable to generate a Logical model, which was quite frustrating.
The workaround was to create new Data Modeller project and import to it from the original project - the 'Engineer to Logical model' worked again. -
PP - Explosão de BOM Phantom em Ordem Planejada
Olá pessoal!
Tenho um cenário onde dentro do meu Produto Acabado, tenho vários componentes organizados em Grupo de Alternates, e para cada grupo, defino um componente como Principal ( 100% de utilização ) e os outros como Opcionais ( 0% de utilização ). Entre esses componentes existem alguns que são configurados como Phantom ( Special Procurement 50 ), e esses itens Phantom, quando são Opcionais na BOM, ou seja, 0% de Probabilidade de Uso em Alternate Item Group, ele não é carregado na lista de componentes da Ordem Planejada. Apenas o Phantom que está como Principal aparece na Ordem Planejada, juntamente com seus subcomponentes.
Os demais componentes que não são Phantom, aparecem normalmente dentro da Ordem Planejada, tanto os que tem 100% de utilização, quanto os que tem 0% definido na BOM. Obviamente, toda a necessidade é apontada no item Principal, mas eu posso modificar de acordo com a disponibilidade do material.
Quando a Ordem de Produção é criada diretamente pela CO01, sem conversão de Ordem Planejada, a lista de componentes traz todos os Phantoms normalmente, independente do percentual de utilização.
Alguém sabe me dizer se existe algum tipo de configuração para permitir que os Phantoms Opcionais, também sejam carregados para lista de componentes das Ordens Planejadas sem precisar alterar o percentual de utilização na BOM?
Agradeço antecipadamente.Olá Márcio,
você descobriu se há parametrização para sua questão?
Abraço. -
I am losing available memory on my iPad (64 GB 3rd gen) and it appears to lose memory because some TV shows that I have downloaded from iTunes are appearing twice in my downloads. Both download, but when Only appear as 1 show on my "videos". After viewing the show, I delete, but the duplicate show appears to be still there somewhere (not visible anywhere) taking up the same amount of memory that showed before downloading. It reduces my available memory to download other shows. The general settings do not show any of these phantom shows taking any memory, but the total available is much, much less than what is showing for all usage such as music, videos, photos, apps, etc
Is it possible to delete a show from the download portion of iTunes if you have already seen a show and do not want to waste time or memory downloading again? The only way that I know is to let it download completely and the delete from "Videos".John0618. Did you ever get a response or solution to problem? I have the same problem (starting about three months ago).
-
Mid-Level Integration/Software Engineer Position
Mid-Level Integration/Software Engineer Position
We have an immediate need for innovative, results-oriented people that desire a challenging, fast-paced environment in which to apply their skills. The ideal candidate is highly motivated and possesses a professional attitude and an exceptional work ethic. He or she must also be able to perform with minimal supervision and deliver solutions to our customers on schedule and within budget.
Company: Mink Hollow Systems, Inc.
Location: Ashton, MD 20861
Experience: 2+ Years
Status: Full-Time, Exempt Employee
Salary Range: Commensurate with Experience
Start Date: September, 2009
Relocation: Negotiable
Responsibilities
Develop software with National Instruments LabVIEW using industry best practices to reduce client risk
Work independently and on group projects in a professional office environment
Requirements
2+ years of LabVIEW Programming Experience Required (Developer CertificationPreferred)
Experience with National Instruments hardware including FieldPoint, PXI, and PC-based devices
Experience with NI cRIO, RT, and/or FPGA systems or similar Preferred
Proven ability to work independently as well as a member of a team in a fast-paced environment and contribute to multiple projects
Ability to rapidly absorb new concepts and apply them effectively
Local and short-term travel required (Approximately 20% - 30% annually)
US Citizenship or Permanent US Residency authorized to work in this country for any employer (Because of the immediacy of this position, we are unable to sponsor people at this time.)
Preference is given to candidates with the following:
Certification: LabVIEW Certified Developer
Certification: Professional Instructor
Experience with LabVIEW DSC
Experience with LabVIEW Embedded
Experience with National Instruments TestStand
Experience with C/C++/.NET
Experience with Macintosh Operating Systems
AcademicQualifications
Minimum BS Engineering (BSChe, BSEE, BSME, or related discipline), Computer Science, or Applied Physics
Responses
Please forward resume and salary requirements to [email protected]
Principals only, no 3rd party resumes, agencies, or contractors accepted
CompanyDescription
Mink Hollow Systems, Inc. is a small, dynamic engineering firm providing systems integration services to a diverse set of regional and national clients. Our broad range of government, military and industrial contracts allow us to provide our employees with challenging opportunities ranging from R&D applications, control systems, production test systems, Real-time and embedded systems, and more.
As a National Instruments Alliance Partner, we offer exciting professional challenges using LabVIEW and National Instruments products to provide solutionsin a wide variety of application areas. We offer an excellent salary/benefit package including medical and dental coverage, pension and profit sharing plans, as well as paid leave and holidays.Hi,
I'm chaitanya. i have 1+yrs exp working in labview and also good c skills.i'm certified as associate developer also have exp working on national instruments devices for data acqusition projects,automated testing eqiupments.i'm right now in india and willing to relocate. if you people are interested please mail me at:[email protected]
thanks
chaitanya -
Junior/Entry Level Integration/Software Engineer Position
Junior/Entry Level Integration/Software Engineer Position
We have an immediate need for innovative, results-oriented people that desire a challenging, fast-paced environment in which to apply their skills. The ideal candidate is highly motivated and possesses a professional attitude and an exceptional work ethic. He or she must also be able to perform with minimal supervision and deliver solutions to our customers on schedule and within budget.
Company: Mink Hollow Systems, Inc.
Location: Ashton, MD 20861
Experience: Minimum 1 Year
Status: Full-time, Exempt Employee
Salary Range: Commensurate with Experience
Start Date: September, 2009
Relocation: Negotiable
Responsibilities
Assist Engineering staff with software development using National Instruments LabVIEW
Interface with clients to provide programming services and support
Requirements
Minimum 1 year LabVIEW Programming Experience Required
Experience in the design, implementation, and documentation of automated test, acquisition, and control systems
Proven ability to work independently as well as a member of a team
Effective interpersonal and problem-solving skills
Outstanding verbal and written communications/presentation skills
Ability to work independently in a fast paced environment and contribute to multiple projects
Ability to rapidly absorb new concepts and apply them effectively
Local and Short term travel required (Approximately 20% - 30% annually)
US Citizenship or Permanent US Residency authorized to work in this country for any employer (Because of the immediacy of this position, we are unable to sponsor people at this time.)
Preference is given to candidates with the following:
Certification: LabVIEW Associate Developer (or better)
Academic Qualifications
Minimum BS Engineering (BSChe, BSEE, BSME, or related discipline), Computer Science, orApplied Physics
PersonalQualifications
Interest in dynamic work environment with project variety
Ability to take on broad responsibilities and technical challenges
Goal-oriented, self-starting, and highly motivated
Proven ability to multi-task and follow-through on complex assignments
Able to meet objectives within budget and on schedule
Responses
Please forward resume and salary requirements to [email protected]
Principals only, no 3rd party resumes, agencies, or contractors accepted
CompanyDescription
Mink Hollow Systems, Inc. is a small, dynamic engineering firm providing systems integration services to a diverse set of regional and national clients. Our broad range of government, military and industrial contracts allow us to provide our employees with challenging opportunities ranging from R&D applications, control systems, production test systems, Real-time and embedded systems, and more.
As a National Instruments Alliance Partner, we offer exciting professional challenges using LabVIEW and National Instruments products to provide solutions in a wide variety of application areas. We offer an excellent salary/benefit package including medical and dental coverage, pension and profit sharing plans, as well as paid leave and holidays.Hi,
I'm chaitanya. i have 1+yrs exp working in labview and also good c skills.i'm certified as associate developer also have exp working on national instruments devices for data acqusition projects,automated testing eqiupments.i'm right now in india and willing to relocate. if you people are interested please mail me at:[email protected]
thanks
chaitanya -
Integration/Software Engineer Position
We have an immediate need for innovative, results-oriented people that desire a challenging, fast-paced environment in which to apply their skills. The ideal candidate is highly motivated and possesses a professional attitude and an exceptional work ethic. He or she must also be able to perform with minimal supervision and deliver solutions to our customers on schedule and within budget.
Company: Mink Hollow Systems, Inc.
Location: Ashton, MD 20861
Experience: 2 Years
Status: Full Time, Exempt Employee
Salary Range: Commensurate with Experience
Start Date: Immediate
Relocation: Negotiable
Responsibilities
Develop software with National Instruments LabVIEW using industry best practices to reduce client risk
Work independently and on group projects in a professional office environment
Develop and implement requirements, designs, test plans, and end-user documentation
Proposal writing and cost estimation
Design and assemble test systems
Interface with clients to provide support
Requirements
Proficiency with LabVIEW Required (Developer Certification Preferred)
Experience with National Instruments hardware including FieldPoint, PXI, and PC-based devices
Ability to work independently in a fast paced environment and contribute to multiple projects
Effective interpersonal and problem-solving skills
Outstanding verbal and written communications/presentation skills
Ability to rapidly absorb new concepts and apply them effectively
Local and Short term travel required (Approximately 20% - 30% annually)
US Citizenship or Permanent US Residency authorized to work in this country for any employer (Because of the immediacy of this position, we are unable to sponsor people at this time.)
Preference is given to candidates with the following:
Certification: LabVIEW Certified Developer (or better)
Academic Qualifications
Minimum BS Engineering (BSChe, BSEE, BSME, etc.), Computer Science, or Applied Physics
Personal Qualifications
Interest in dynamic work environment with project variety
Ability to take on broad responsibilities and technical challenges
Goal-oriented, self-starting, and highly motivated
Proven ability to multi-task and follow-through on complex assignments
Able to meet objectives within budget and on schedule
Responses
Please forward resume and salary requirements to [email protected]
Principals only, no 3rd party resumes, agencies, or contractors accepted
Company Description
Mink Hollow Systems, Inc. is a small, dynamic engineering firm providing systems integration services to a diverse set of regional and national clients. Our broad range of government, military and industrial contracts allow us to provide our employees with challenging opportunities ranging from R&D applications, control systems, production test systems, Real-time and embedded systems, and more.
As a National Instruments Alliance Partner, we offer exciting professional challenges using LabVIEW and National Instruments products to provide solutions in a wide variety of application areas. We offer an excellent salary/benefit package including medical and dental coverage, pension and profit sharing plans, as well as generous leave policies.resume is attached check it 1....................
Attachments:
venkatesh.doc 41 KB -
Engineer visit re: new infinity order need urgent ...
i ordered Infinity yesterday and received all teh relevant emails from BT confirming order.
One email states the engineer will visit from 13:00 and 18:00 Ive just check the status of my order and it now states the followin info where previously a time was given for the enginner:
Your appointment is no longer required, as our engineer can connect your line without requiring access to your premises. The engineer will work to connect your line at the exchange.
I am very concerned who do I call? - I dont want to call and go to India becuase people on the forum seem to have issues with enginner visits when they have been routed to the team there - Im disabled and need my connection - My understanding is that an engineer does need to attend the property to install the bt modem vDSL?
Lee
Broadband - BT Infinity Option 2
Your appointmentuklee wrote:
i ordered Infinity yesterday and received all teh relevant emails from BT confirming order.
One email states the engineer will visit from 13:00 and 18:00 Ive just check the status of my order and it now states the followin info where previously a time was given for the enginner:
Your appointment is no longer required, as our engineer can connect your line without requiring access to your premises. The engineer will work to connect your line at the exchange.
I am very concerned who do I call? - I dont want to call and go to India becuase people on the forum seem to have issues with enginner visits when they have been routed to the team there - Im disabled and need my connection - My understanding is that an engineer does need to attend the property to install the bt modem vDSL?
Lee
Broadband - BT Infinity Option 2
Your appointment
Hi there,
You can safely ignore that notification. The engineer does need access to your property, as he will need to install the BT Openreach VSDL modem and the Infinity SSFP (Service Specific Face Plate) onto your current master socket.
I hope this info helps. -
Items below to phantom items are not available in ASCP workbenck.
Hi Experts,
I came up one issue on ASCP, consider following BOM. Assume that all below items are MRP planned , all items supply qty is zero,
FG ( finished good, WIP supply type - Push)
|-> PH ( Phantom, WIP Supply type - Phantom)
|-> P (Purchase item, WIP Supply type - Push)
Now I have entered forecast against FG. After running data collection and plan, I can see forecast for FG. It is suggesting work order for FG but not suggesting purchase order for P part. While going in detail, I found that BOM data is successfully imported from source instance by data collection. But in plan, I can not see any child part for FG.. either PH or P. And this will be reason of not creating planned order for P. So can you please help me to find out reason behind this behavior.Hi Dipak,
Check the value for profile option MRP: Explode Demand Through Phantom Component. It should be set to yes for planning to recognize the requirements for the components below the phantom.
Prabhu Chepuri. -
How can I make sure the engineer comes this time?
Hi there I noticed at the beginning of last week that my broadband had slowed to a crawl. I checked the phone and could not get a dial tone. Ringing our number made the phone ring but no conversation was possible. Broadband was synced at 640 Kbps I got the automated line checker which found a fault near my property - the telegraph pole in the graphic. I fault was logged on May 1st and I got a repair date for next Wednesday 9th which I wouldn't be able to make so I went to rearrange and was able to pick last Saturday morning 5th May. About 2 hours after i rearranged it I had a call from Mumbai, he said someone was going to be coming on the original date of Wednesday, I assumed that as I had just rearranged this would not now be happening, but couldnt get him to understand that the new dte of saturday 5th wasshoes ing on my fault update page. Sure enough nobody came on the Saturday . I have now rearranged it for the afternoon of Friday 11th May My question is how do I find out if an engineer is still going to come on Wednesday afternoon (I can try to take the afternoon off from work) or has that now been properly rearranged for Friday, given that last time it was irrelevant that Saturday was showing on my fault update page for the engineers visit? Is there any way I can confirm this is logged properly on the BT systems? Sorry about the long paragraphs posting from an iPad doesn't result in correct formatting!
Haha, the engineer turned up today, on the wednesday, which was the original date allocated!
Despite me rearranging for last saturday morning, (showing up on my "track my fault") then, following a non show, rearranging for next friday afternoon, (showing up on my "track my fault") the OR enginner phones me (on my mobile obviously) to tell me he is her at 12.20 on the wednesday.
Luckily I was at work and could get home in 20 mins, and the chap (really nice) said he would make a start. By the time I got home he told me he had fixed it - the connection was ?corroded (6 yr old house) on the BT side of the fence.
There is a total disconnect between the "track my fault" page with BT and Openreach
If my mobile had not been in signal range and I had not been able to get home to meet this really nice OR enginner, and had they not turned up on Friday with an afternoon lost from work I would not have been happy!
I have an installation date for BT Infinity in 2w time, on price alone, but hope i don't live to regret this
I would appreciate a reply as to why "rearrange my appointment" has no effect -
Hi All,
We are working on Oracle Database 10g
We have to develop a code which involves Configure To Order (CTO) and Engineer To Order (ETO) items.
Can anyone advise is there any table and the corresponding column in the database which will help identify if an item is a CTO or ETO.
Regards,
ShrutiShruti,
Have you checked eTRM website? -- http://etrm.oracle.com
Please also see (How To Find the VIEW or TABLE That Populates a Form So That a 'Custom Report' Can Be Created Using Same VIEW or TABLE (Doc ID 604772.1)).
Thanks,
Hussein -
Looking for guidance / lessons learned on phantoms. I have several assemblies that use multi level phantoms assemblies and the problem I am encountering is when the the BOMs all get pushed up to the top level, the shop order cannot be cut due to duplicates.
A very basic example is I have screw that goes into a plate. The plate is a phantom and used on two different sub assemblies. These sub assemblies are phantoms and report to the same top level assembly that I am building. When I attempt to cut a shop order, the screw that was all the way at the bottom appears twice on the top level BOM when the two phantom BOMs are pushed up and causes an errorpreventing me from moving forward.
I currently set my special procurement type 50 in MM03. I have heard that I could set it up on the individual BOMs, however I do not see this fixing the problem as the material and item number of the duplicate will remain the same regardless of how it was set up.
Any advice or inputs? Please let me know if you need more detail.
Thanks.Hello
Can you please provide more details about the error? Is there an error message? Can you please provide the message ID, number and the description?
BR
Caetano -
Software Development Engineer
Hysitron, Inc. is a premier scientific instrument manufacturer. Founded in 1992 with headquarters located in Eden Prairie, MN we are committed to promoting nanotechnology by developing advanced transducer and control technology. This leadership has made Hysitron the world leader in nanomechanical test instruments. The TriboIndenter®, TriboScope®, Ubi, and other Hysitron innovations have opened new horizons for scientists interested in investigating and understanding mechanical properties of materials at nano-scale. Hysitron fosters an environment and culture where innovation flourishes, teamwork is encouraged, and superior performance is rewarded.
Hysitron invites applications for multiple software development engineer positions from those aspiring to explore and succeed in the nano world. Hysitron, Inc. is an Equal Opportunity Employer M/F/D/V
Job responsibilities
The software development engineers would be responsible for developing test and measurement software applications for nano-mechanical testing instrumentation. Job deliverables would include:
- Develop software applications in C based Labwindows CVI for Hysitron Instrumentation
- Support the development of applications to address challenges in instrument automation and control
- Test software applications using debugging and simulation tools
- Perform software releases and software quality assurance activities
- Participate in the design of new software products
- Perform maintenance activities for existing products
- Adapt and deliver on quality software development practices
Minimum qualifications
- BS in Computer Science/ Computer Engineering/ Equivalent Scientific or engineering discipline
- Min of 3 yrs experience in Instrumentation software development in an industrial or R&D environment
- Expert at programming language C, knowledge of C++
- Working knowledge of various communication protocols, e.g. USB, RS232, IEEE, RS485, TCP/IP, Modbus
- Knowledge of general software design/documentation processes in test and measurement systems
- Proficient problem solving skills
- Strong analytical and technical skills
- Excellent communication and interpersonal skills
Preferred Qualifications
- Proficient with LabWindows CVI and XML
- Working experience with DSP(Code Composer Studio) and/or FPGA level programming
- Exposure to digital electronics and instrumentation
- Working experience in Robotics interface programming
- Experience with Controls/Automation engineering
Application and Information
Qualified candidates should send a letter of application and their resumes to (please include ‘SW Engineer’ in subject line):
Hysitron, Inc.
10025 Valley View Rd
Eden Prairie, MN 55344 USA
Phone: (952) 835-6366
Fax: (952) 835-6166
E-MAIL: [email protected]
Web: www.hysitron.comThis position is still accepting resumes/CVs.
-
Open letter to the chief designer/engineer of the Q10
Premises:
- I have never bothered to post anything on any forum in my whole life but today I could not hold it.
- I have been using blackberry devices every 5 minutes for the last 6 years of my awake life.
- I work in a bank and half of my 2000 contacts have a blackberry as a work phone.
This is the rudest I will get in this post and I hope you will publish it: "Chief engineer, what the hell passed through your mind when you decided to remove the trackpad from the new Q10?"
One step back. Let's go back few years.
Bold 9000 was the best handset I have ever had. The mechanical trackpad was razor sharp and accurate and fast. Yes maybe I had to replace it once every 18 months but who cares, and how much can it cost you guys anyway a little ball of plastic? At that time I used to challenge any iPhone user to see who could type faster. I always won. If I still had it I could still win. It doesn't matter that I type with 2 fingers on my PC keyboard and that I have a permanent RSI on my right arm. I was lightning fast. Sometimes I can type even without looking at the BlackBerry keyboard.
Then you decided to make the keyboard smaller or remove it all together to feel like an iPhone. Not a great choice. Keyboard (together with the trackpad and instant emails) is all you had. And believe me that was more than enough. I feel crippled when using the Bold 9700 and I do not have giant hands. The software has been designed to maximize the number of clicks to do anything. Why should I waste a click to open the tray when 3/4 of the screen is empty?!? I endured 18 months of my contract waiting for the latest bold.
At some point you realized that the keyboard was important and you made it bigger again. Fantastic! Your realized that most business people do like the physical keyboard and they use their phone for writing and reading. Many of them. Very often. And they have to be quick.
But then today I go to try the new BB Bold Q10 and I realized that you have removed the trackpad. So instead of moving any of my thumbs 2mm higher to click and scroll now my fingers have to travel a much longer distance to do the same in a more awkward and wasteful way. Things keep getting less accurate. Mechanical trackpad, then the worse optical one, now what?
I went on Ebay. Some new old BB Bold 9000 are still for sale at 70 GBP. I will buy a couple today. This will keep me running for 2-3 years. By then I hope that you will have either lost your job because your company went bust or repented and produced what business people really want.
I hope not too many other people will be bidding with me today.
E.S.I was on BOLD 9900 before, I loved it, but moved on to Z10, and now got the Q10. Honestly - the most superb phone in the world ! Don't need the trackpad
Maybe you are looking for
-
Is Apple going to make Safari compatible with Youtube again?
Like many others, I have tried every fix to be able to watch Youtube videos on Safari. I have a 2007 Mac book. I get sound, but no video just a black screen. Works in 32 bit mode but I made this fix, not Apple. Youtube works fine on Camino, Chrome an
-
How do I stop scrolbars in a DIV in Netscape
Hi I have a containing DIV which displays fine in Firefox and IE, but when it's dynamic data extends too low, scrollbars appear within the DIV (only in Netscape). What do I put in the CSS to stop this? Cheers Shaun
-
Change SID for Content Server on MaxDB.
Hi all, We want to Change the SID's for all the SAP systems in existing landscape and we are tying to do the same with Content Server, which is having a MaxDB database. I wonder if anyone can give their inputs on this process what needs to be done, t
-
Hp pavilion dv6 some keys are not working
,i bought my laptop 2 year earlier now some keys are not working such as less than ,greater than,question mark and all the right side keys of the keyboard plz help i have to do lots of work in laptop so i m very much tensed abt this plz help me as
-
Support system tray icon of Air application
Hi All, I developed a widget with flash builder 4 and I exported all the project in AIR application. Then, I packaged AIR application in .exe file for Windows, and dmg file for MAC. My application works correctly for both of OS. When I launch applica