Phap_admin: how to add columns to the initial ALV

Hello everyone,
I have a requirement which is to add 2 new columns on the ALV that appears after going through the phap_admin selection screen.
I show you a picture as an example:
I need to add 2 fields form infotype 0002 in this ALV list.
I've been looking around and I found this badi: HRHAP00_REPORTING, but I don't think it can help me, because this bady Works after clicking the status button "Reporting" at /nphap_search.
Does anybody faced the same issue?
Do you now any badi for that purpose?
Help would be apreciated and rewarded with points.
Kind regards.

Append your additional fields in this structure HAP_S_DOCUMENTS  it will show in the layout.
then write implicit enhancement for data population where final itab is filling.
and  after append structure,   for data population in the following include LHRHAP_UI_DOCUMENT_REPORTF06 and subroutine f1100_ctrl_create   modify table based on ur logic.
I tried in my sandbox its working fine and data  is showing perfectly.
suri

Similar Messages

  • How to add columns in the Group Custom Columns

    Hi,
    In a group, if you select Edit Group link, and select the Columns tab, and then select the "Modify" button, then select a target type from the drop down, you can pick listed columns and move it to the Selected Columns list. I am interested in adding a column in the drop down list, how do I do that? If the target type is a plug-in that I created, then what properties I should set in the metadata xml file?
    Thanks for the help.

    As far as I am aware, there are no properties in your plugin's target type metadata XML file that relate to what columns show up in the Groups UI in the EM console. I suggest pursuing this as a bug against the Groups UI.

  • How to add column in the item overview screen (4900) in sales order?

    Hello Experts,
    I have a requirement to add a column (Field - Size/Dimensions - MARA-GROES) in the Item Overview Screen (4900).
    Is there any provision for that? Any enhancement or screen exit or so?
    Quick response will be appriciated.
    Thanks in advance.
    regards,
    hp

    Hi
    As the link that RamKi let us know, this is a modification, so, I suggest to avoid. See SAP Note 862228 - Order reason for returns on item level for further information. I suggest to use the other enhancements in tabs.
    Regards
    Eduardo

  • How to add column to report from the same table? Gives error now

    Steps to reproduce:
    Build a report on a table with easy report, select all columns
    Add column to the table
    Edit report and add column (one has to click Show Related Tables Only: No to view the same table!)
    Report will give error as it will be build as
    SELECT ... FROM table1, table1

    AH HAAA!!!!
    And I was afraid to convert from the "SQL (Structured Query)" to "SQL". Probably because I blew up my other reports...
    Thanks!

  • How to add column dynamically based on user input in oracle?

    **how to add column dynamically based on user input in oracle?**
    I am generating monthly report based on from_date to to_date below is my requirement sample table
    EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE | 01-OCT-12 | 02-OCT-12 | 03-OCT-12
    100001.............John...........02-OCT-12...............6
    100002.............chris...........01-OCT-12...............4
    Based on user input, that is, if user need the report from 01-OCT-12 TO 03-OCT-12, i need to add that dates as column in my table, like 01-OCT-12 | 02-OCT-12 | 03-OCT-12....
    below is my code
    create or replace
    procedure MONTHLY_LVE_NEW_REPORT_demo
    L_BUSINESS_UNIT IN SSHRMS_LEAVE_REQUEST_TRN.BUSINESS_UNIT%TYPE,
    --L_LEAVE_TYPE_CODE           IN SSHRMS_LEAVE_REQUEST_TRN.LEAVE_TYPE_CODE%TYPE,
    L_DEPARTMENT_CODE IN VARCHAR2,
    --L_MONTH                    IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
    L_FROM_DATE IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
    L_TO_DATE in SSHRMS_LEAVE_REQUEST_TRN.LVE_TO_DATE%type,
    MONTHRPT_CURSOR OUT SYS_REFCURSOR
    AS
    O_MONTHRPT_CURSOR_RPT clob;
    v_return_msg clob;
    BEGIN
    IF (L_BUSINESS_UNIT IS NOT NULL
    AND L_FROM_DATE IS NOT NULL
    and L_TO_DATE is not null
    -- AND L_DEPARTMENT_CODE IS NOT NULL
    THEN
    OPEN MONTHRPT_CURSOR FOR
    select EMPLOYEE_CODE, EMPLOYEE_NAME AS NAME, DEPARTMENT_CODE AS DEPARTMENT,DEPARTMENT_DESC, CREATED_DATE,
    NVL(WM_CONCAT(CL_RANGE),'') as CL_TAKEN_DATE,
    case when NVL(SUM(CL2),0)<0 then 0 else (NVL(SUM(CL2),0)) end as CL_BALANCE,
    from
    SELECT DISTINCT a.employee_code,
    a.EMPLOYEE_FIRST_NAME || ' ' || a.EMPLOYEE_LAST_NAME as EMPLOYEE_NAME,
    a.DEPARTMENT_CODE,
    a.DEPARTMENT_DESC,
    B.LEAVE_TYPE_CODE,
    B.LVE_UNITS_APPLIED,
    B.CREATED_DATE as CREATED_DATE,
    DECODE(b.leave_type_code,'CL',SSHRMS_LVE_BUSINESSDAY(L_BUSINESS_UNIT,to_char(b.lve_from_date,'mm/dd/yyyy'), to_char(b.lve_to_date,'mm/dd/yyyy'))) CL_RANGE,
    DECODE(B.LEAVE_TYPE_CODE,'CL',B.LVE_UNITS_APPLIED)CL1,
    b.status
    from SSHRMS_EMPLOYEE_DATA a
    join
    SSHRMS_LEAVE_BALANCE C
    on a.EMPLOYEE_CODE = C.EMPLOYEE_CODE
    and C.STATUS = 'Y'
    left join
    SSHRMS_LEAVE_REQUEST_TRN B
    on
    B.EMPLOYEE_CODE=C.EMPLOYEE_CODE
    and c.EMPLOYEE_CODE = b.EMPLOYEE_CODE
    and B.LEAVE_TYPE_CODE = C.LEAVE_TYPE_CODE
    and B.STATUS in ('A','P','C')
    and (B.LVE_FROM_DATE >= TO_DATE(L_FROM_DATE, 'DD/MON/RRRR')
    and B.LVE_TO_DATE <= TO_DATE(L_TO_DATE, 'DD/MON/RRRR'))
    join
    SSHRMS_LEAVE_REQUEST_TRN D
    on a.EMPLOYEE_CODE = D.EMPLOYEE_CODE
    and D.LEAVE_TYPE_CODE in ('CL')
    AND D.LEAVE_TYPE_CODE IS NOT NULL
    group by EMPLOYEE_CODE, EMPLOYEE_NAME, DEPARTMENT_CODE, DEPARTMENT_DESC, CREATED_DATE
    else
    v_return_msg:='Field should not be empty';
    end if;
    END;
    my code actual output
    EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE
    100001....................John............02-OCT-12.................6
    100001....................chris...........01-OCT-12.................4
    how to add column dynamically based on from_date to to_date?
    Thanks and Regards,
    Chris Jerome.

    You cannot add columns dynamically. But you can define a maximum number of numbers and then hide unused columns in your form useing SET_ITEM_PROPERTY(..,VISIBLE, PROPERTY_FALSE);

  • Reg:How to add fields to the scripts in detail

    How to add fields to the scripts in detail.
    Plz give me one example help me out.

    Hi
    add fields to the scripts by sending that field between  two &s.
    for example if u want to add lifnr of lfa1 table then pass field like this.
    &wa_lfa1-lifnr&.here wa_lfa1 is work area for internal table it_lfa1.
    if name1 then &wa_lfa1-name1&
    in this way you can add fields to the script under any window.
    i am sending one example program for scripts.
    &--structure declaration--
    TYPES:BEGIN OF ST_LFA1,
          LIFNR TYPE LFA1-LIFNR,
          NAME1 TYPE LFA1-NAME1,
          LAND1 TYPE LFA1-LAND1,
          ORT01 TYPE ORT01,
          REGIO TYPE REGIO,
          END OF ST_LFA1.
    TYPES:BEGIN OF ST_EKKO,
          EBELN TYPE EKKO-EBELN,
          BUKRS TYPE EKKO-BUKRS,
          AEDAT TYPE EKKO-AEDAT,
          ERNAM TYPE EKKO-ERNAM,
          BSTYP TYPE EKKO-BSTYP,
          LIFNR TYPE EKKO-LIFNR,
          END OF ST_EKKO.
    TYPES:BEGIN OF ST_EKPO,
          EBELN TYPE EKPO-EBELN,
          EBELP TYPE EKPO-EBELP,
          LOEKZ TYPE EKPO-LOEKZ,
          AEDAT TYPE EKPO-AEDAT,
          MATNR TYPE EKPO-MATNR,
          NETWR TYPE EKPO-NETWR,
          END OF ST_EKPO.
    &--internal table,work area declaration--
    DATA:WA_LFA1 TYPE ST_LFA1,
         IT_LFA1 TYPE STANDARD TABLE OF ST_LFA1,
         WA_EKKO TYPE ST_EKKO,
         IT_EKKO TYPE STANDARD TABLE OF ST_EKKO,
         WA_EKPO TYPE ST_EKPO,
         IT_EKPO TYPE STANDARD TABLE OF ST_EKPO.
    &--data declaration--
    DATA:TOTAL TYPE EKPO-NETWR,
          V_EBELN TYPE EKKO-EBELN.
    data: v_item(20) type c.
    &--parameter for purchase document number--
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETERS P_PURDOC LIKE V_EBELN.
    SELECTION-SCREEN END OF BLOCK B1.
    START-OF-SELECTION.
      PERFORM GET_DATA_FROM_EKKO.
      PERFORM GET_DATA_FROM_LFA1.
      PERFORM GET_DATA_FROM_EKPO.
    &--grand total--
      LOOP AT IT_EKPO INTO WA_EKPO.
        TOTAL = TOTAL + WA_EKPO-NETWR.
        CLEAR WA_EKPO.
      ENDLOOP.
    &--open form--
      CALL FUNCTION 'OPEN_FORM'
       EXPORTING
        DEVICE                            = 'PRINTER'
        FORM                              = 'Z_50886_VENDOR'
        LANGUAGE                          = SY-LANGU
       EXCEPTIONS
         CANCELED                          = 1
         DEVICE                            = 2
         FORM                              = 3
         OPTIONS                           = 4
         UNCLOSED                          = 5
         MAIL_OPTIONS                      = 6
         ARCHIVE_ERROR                     = 7
         INVALID_FAX_NUMBER                = 8
         MORE_PARAMS_NEEDED_IN_BATCH       = 9
         SPOOL_ERROR                       = 10
         CODEPAGE                          = 11
         OTHERS                            = 12
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    &--write form for header details--
      READ TABLE IT_EKKO INTO WA_EKKO INDEX 1.
      CALL FUNCTION 'WRITE_FORM'
       EXPORTING
         ELEMENT                        = 'HEAD'
         WINDOW                         = 'HEADER'
       EXCEPTIONS
         ELEMENT                        = 1
         FUNCTION                       = 2
         TYPE                           = 3
         UNOPENED                       = 4
         UNSTARTED                      = 5
         WINDOW                         = 6
         BAD_PAGEFORMAT_FOR_PRINT       = 7
         SPOOL_ERROR                    = 8
         CODEPAGE                       = 9
         OTHERS                         = 10
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    &--write form for item details--
      LOOP AT IT_EKPO INTO WA_EKPO.
      concatenate wa_ekko-ebeln wa_ekpo-ebelp into v_item.
        CALL FUNCTION 'WRITE_FORM'
         EXPORTING
           ELEMENT                        = 'ITEM'
           WINDOW                         = 'MAIN'
    EXCEPTIONS
       ELEMENT                        = 1
       FUNCTION                       = 2
       TYPE                           = 3
       UNOPENED                       = 4
       UNSTARTED                      = 5
       WINDOW                         = 6
       BAD_PAGEFORMAT_FOR_PRINT       = 7
       SPOOL_ERROR                    = 8
       CODEPAGE                       = 9
       OTHERS                         = 10
        IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDLOOP.
    &--write form for vendor details--
      READ TABLE IT_LFA1 INTO WA_LFA1 INDEX 1.
      CALL FUNCTION 'WRITE_FORM'
       EXPORTING
         ELEMENT                        = 'VENDOR'
         WINDOW                         = 'ADDRESS'
       EXCEPTIONS
         ELEMENT                        = 1
         FUNCTION                       = 2
         TYPE                           = 3
         UNOPENED                       = 4
         UNSTARTED                      = 5
         WINDOW                         = 6
         BAD_PAGEFORMAT_FOR_PRINT       = 7
         SPOOL_ERROR                    = 8
         CODEPAGE                       = 9
         OTHERS                         = 10.
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    &--write form for grand total--
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
        WINDOW                         = 'TOTAL'
    EXCEPTIONS
       ELEMENT                        = 1
       FUNCTION                       = 2
       TYPE                           = 3
       UNOPENED                       = 4
       UNSTARTED                      = 5
       WINDOW                         = 6
       BAD_PAGEFORMAT_FOR_PRINT       = 7
       SPOOL_ERROR                    = 8
       CODEPAGE                       = 9
       OTHERS                         = 10
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    &--close form--
      CALL FUNCTION 'CLOSE_FORM'
       EXCEPTIONS
         UNOPENED                       = 1
         BAD_PAGEFORMAT_FOR_PRINT       = 2
         SEND_ERROR                     = 3
         SPOOL_ERROR                    = 4
         CODEPAGE                       = 5
         OTHERS                         = 6
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    *&      Form  get_data_from_ekko
    FORM GET_DATA_FROM_EKKO .
      SELECT EBELN
             BUKRS
             AEDAT
             ERNAM
             BSTYP
             LIFNR
          FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = P_PURDOC.
    ENDFORM.                    " get_data_from_ekko
    *&      Form  get_data_from_lfa1
    FORM GET_DATA_FROM_LFA1 .
      IF NOT IT_EKKO[] IS INITIAL.
        SELECT LIFNR
               NAME1
               LAND1
               ORT01
               REGIO
               FROM LFA1 INTO TABLE IT_LFA1 FOR ALL ENTRIES IN IT_EKKO WHERE
                    LIFNR = IT_EKKO-LIFNR.
      ENDIF.
    ENDFORM.                    " get_data_from_lfa1
    *&      Form  get_data_from_ekpo
    FORM GET_DATA_FROM_EKPO .
      IF NOT IT_EKKO[] IS INITIAL.
        SELECT EBELN
               EBELP
               LOEKZ
               AEDAT
               MATNR
               NETWR
               FROM EKPO INTO TABLE IT_EKPO
               WHERE EBELN = P_PURDOC.
      ENDIF.
    ENDFORM.                    " get_data_from_ekpo

  • How to add spaces at the end of record

    Hi Friends,
    i am creating a file which contains more than 100 records.
    In ABAP i have internal table with on field(135) type c.
    some time record have length 120, somtime 130 its vary on each record.
    but i would like to add space at the end of each record till 135 length.
    Can you please help me how to add speace at the end of record.
    regards
    Malik

    So why did you said that in your first posting? My glass sphere is out for cleaning...
    Instead of type c use strings and add spaces until they have the appropriate length.
    loop at outtab assigning <pout>.
      while strlen( <pout>-val ) < 135.
        concatenate <pout>-val `` into <pout>-val.
      endwhile.
    endloop.

  • How to add marker on the clip?

    Hi!!!
    Could you help me, how to add marker on the clip? Not on the sequence. I need the marker to moving as I moving clip in the sequence.
    Thanks!!!

    Ohhh... I just had to switch to the source monitor. OK. Just I don't use the source monitor usally. Only the program one. Thank you. It worked!
    Fri, 12 Oct 2012 05:02:08 -0600 от Jim Simon <[email protected]>:
    >     
    >
        Re: How to add marker on the clip?
        created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion

  • Nsert/Update and Add Column at the same Table and at the "same" Time

    Hello,
    I want Insert/Update and Add Column at the same Table and at the "same" Time but in different sessions.
    Example:
    At first the "insert/update" statement:
    Insert into TestTable (Testid,Value) values (1,5105);
    After that the "add" statement:
    Alter table TestTable add TestColumn number;
    - sadly now I get the message: ORA-00054: resource busy and acquire with NOWAIT specified
    "insert/update" statement:
    Insert into TestTable (Testid,Value) values (2,1135);
    After that the execute commit.
    I don't know when the first session set the commit statement so I want that the DB the "Alter Table..." statement execute if it's possible.
    If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.
    Thanks for ideas

    Well I want to walk in the rain without and umbrella and still stay dry, but it ain't gonna happen.
    You can't run a DDL statement against a table with transactions pending. Session 2 has to wait until session commits or rollbacks (or until the session is killed). That's just the way it is.
    This makes sense if you think about it. The data dictionary has to be consistent across all sessions. If session 2 was allowed to change the table structure whilst session 1 has a pending transaction then the database is in an inconsistent state. This is easier to see if you consider the reverse situation - the ALTER TABLE statement run by session 2 does a DROP COLUMN TESTID rather than adding a column: now what should happen to session 1's INSERT statement? You have retrospectively invalidated a statement that was perfectly legal when it was executed.
    If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.Fnord.
    Cheers, APC

  • How to add request in the buffer

    Hii All,
    How to add request in the buffer in bulk.
    i am using following command.
    tp addtobuffer requestno <sid>
    but after doing it is giving me the following error
    C:\usr\sap\trans\bin>tp         addtobuffer     BWDK900161      BT1
    ^CThis is tp version 340.07 (release 640, unicode enabled)
    E-TPSETTINGS could not be opened.
    EXIT
    ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
    Error in TPSETTINGS: transdir not set.
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0208
    tp finished with return code: 208
    meaning:
      error in transportprofil (param missing, unknown,...)
    Pls help.
    Regards,
    Viren.

    Hi Rolf,
    thax for your reply.
    But still it is not working it shows following message.
    C:\usr\sap\trans\bin>tp addtobuffer BWDK900051 BT1 pf=c\usr\sap\trans\bin\TP_DOM
    AIN_BT1.PFL
    This is tp version 340.07 (release 640, unicode enabled)
    E-c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL could not be opened.
    EXIT
    ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
    Error in c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL: transdir not set.
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0208
    tp finished with return code: 208
    meaning:
      error in transportprofil (param missing, unknown,...)
    Regards,
    Viren.

  • How to add filter in the dist. model

    hi,
    how to add filter in the dist. model
    thanks
    Ruban

    Hi,
    Please try this.
    1. Go to transaction BD64.
    2. Click on Change button.
    3. Expand the corresponding model view.
    4. Expand the corresponding message type (i.e MATMAS).
    5. Place the cursor to 'No filter set' and double click.
    6. Click on Create Filter Group.
    7. Add your filter from here ...
    8. Once done, save the model view.
    For more information, please check this link.
    http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
    Regards,
    Ferry Lianto

  • How to add Column to Adobe flex mx:DataGrid in mxml and/or actionsctpt?

    I have simple mxml code
    <mx:DataGrid id="DGG"
                 editable="true">
        <mx:dataProvider>
            <mx:Object scheduledDate="4/1/2006"/>
        </mx:dataProvider>
    </mx:DataGrid>
    <mx:Button id="SetBut"
               label="Set Array as Data Provider"
               click="SetDP(); AddBut.visible = true;"
               x="100.5"
               y="164"
               width="211"/>
    <mx:Button id="AddBut"
               label="Add a column!"
               click="AddCol();"
               x="100.5"
               y="194"
               width="211"
               visible="false"/>
    <mx:Script>
        <![CDATA[
            import mx.controls.dataGridClasses.DataGridColumn;
            import mx.collections.ArrayCollection;
            [Bindable]
            public var MyAC:ArrayCollection=new ArrayCollection([{scheduledDate: "4/1/2006", homeTeam: "Chester Bucks"}]);
            public function SetDP():void
                DGG.dataProvider=MyAC
            public function AddCol():void
                MyAC.addItem({scheduledDate: "4/5/2007", homeTeam: "Long Valley Hitters", Umpire: "Amanda Hugenkis"});
                DGG.columns.push(new DataGridColumn("Umpire"));
        ]]>
    </mx:Script>
    I want to add rows to my table datagrid how to do such thing?
    How to add Column to Adobe flex mx:DataGrid in mxml and/or actionsctpt?
    (You can put this code in Flash or AIR app - it will compile with no errors, but will not add any columns=( )

    Change this:
                 public function SetDP():void
                    DGG.dataProvider=MyAC
                    MyAC.addItem({scheduledDate: "4/5/2007", homeTeam: "Long Valley Hitters", Umpire: "Amanda Hugenkis"});
                public function AddCol():void
                    var dgc:DataGridColumn = new DataGridColumn("Umpire");
                    var ca:Array = DGG.columns;
                    ca.push(dgc);
                    DGG.columns = ca;
    Dany

  • How to add Acrobat to the Microsoft Office ribbon?

    how to add Acrobat to the Microsoft Office ribbon?

    Hi ebender888,
    What versions of Acrobat and Office do you have? See if this post helps: https://answers.acrobatusers.com/Why-Acrobat-PDFmaker-Office-COM-Addin-tab-disappearnig-Wo rd-Office-2013-q152959.aspx
    If not, let us know what software you're using, and we'll try to get you pointed in the right direction.
    Best,
    Sara

  • HT5654 how to add videos to the ipad using the latest version of itunes

    how to add videos to the ipad using the latest version of itunes ?

    Hello zaraa90,
    After reviewing your post, I have located an article that can help with syncing content. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    Sync your iPhone, iPad and iPod with iTunes using USB
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • How to add Video on the OAF page like youtube ?

    Any one know how to add Video on the page?

    If you are getting HTML code from one of these slideshow.com places, you can add this code to your iWeb pages with a little bit of work. Two things to keep in mind...1. No way to do this via iWeb directly, so it involves editing the published html files, and 2. Because iWeb republishes the html files whenever you update the your webpage, you will lose your changes and have to redo them to add your slideshows back.
    The general directions are as follows...
    1. Decide where you want your slideshow and know exactly what dimensions you need.
    2. Insert a text box onto your page and adjust its size to exactly your dimensions.
    3. Type in some uniquely identifiable text like, "SLIDESHOWHERE" without changing the font or anything else...just type it in.
    4. Publish your page with iWeb.
    5. Find the html file associated with your published page (either on your iDisk or in a folder depending on how you published) and open it in any text editor (like Microsoft Word, or Textedit, or anything). You may need to set your text editor to "ignore rich text" or to "show HTML source".
    6. Scroll through the html file and locate your placeholder text, e.g. "SLIDESHOWHERE".
    7. Replace the placeholder text with your html code and save your page.
    That's it. You should see your slideshow element show up in Safari where you placed the text box in iWeb!

Maybe you are looking for