Phap_catalog tcode getting dumped on status flow tab
Dear Friends,
I am getting dumped in my system in tcode phap_catalog when we execute this tcode & double click on personal appraisals.there is two tabs. when we click on status flow tab, it getting dumped message type x.
Plz suggest.
Ankit
For adding information, i am adding some part of dump..
Runtime Error
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
system
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
System environment
SAP Release.............. "620"
Transaction......... "PHAP_CATALOG "
Program............. "SAPLOLEA"
Screen.............. "SAPLHRHAP_C_UI_CATALOG 1000"
Screen line......... 0
Information on where terminated
The termination occurred in the ABAP program "SAPLOLEA" in "AC_SYSTEM_FLUSH".
The main program was "RHHAP_APPRAISAL_CATALOG ".
The termination occurred in line 29 of the source code of the (Include)
program "LOLEAU02"
of the source code of program "LOLEAU02" (when calling the editor 290).
End of runtime analysis
Edited by: Ankit on Aug 22, 2008 10:05 AM
Similar Messages
-
Performance Management - Appraisal Catalog - Status Flow Tab
Good afternoon experts,
So I am configuring a performance template (object type VA) and I noticed on the tab, "status flow" that there is a section at the bottom called "Status Change: Description"
Has anyone used this field before, so for example, if you are configuring the status flow from "In Planning" to "In Review" you have the option of maintaining this field.
Whenever I try to use it, I get a critical error message (An unexpected technical error has occurred), and phap_catalog_pa exits back to the SAP Easy Access screen. Any thoughts on this?
Thanks for your help,
AdamHello guys,
First of all I would suggest to run report RHHAP_CUSTOMIZING_CHECK to check your configuration, it might help identify the issue.
The reason for the error message could also be, that no valid object id could be assigned to the criterion due to the definition of the number range.
Please see table NRIV (or transaction SNRO) for number range object RP_PLAN: As no specific subgroup is defined for object type 'VC' (criterion), the entry for subgroup $$$$ is taken to determine the next valid number. The internal number range for subgroup '$$$$' is defined with the interval 'From number' 50000000 'to number' 50000099.
However as you can check in table PLOGI, all those numbers are used already for existing criterions. So there is no number free in the defined interval, which can be assigned internally to the new object.
For the criterion group (object type VB) the same interval is used,but here some IDs are still free to be used for object type VB in this interval.
So the recommendation is to enhance the number range interval.You could either enhance the existing interval for subgroup $$$$, or create specific ones for object types VC, VB etc.(see notes 81458 and 87865.)
Check as well your relationships, in a previous message I worked on the problem was with missing relationships in table T777Z
and T777E.
Hope this help -
Error in Status Flow-Talent Management
Hi,
I am trying to create Category Group and Category using the Tcode: PHAP_CATALOG.We are implementing on EHP7.While configuring Category group,in status tab im not able to choose In preparation,In Planning and Completed statuses as they are been grayed out.And it is showing me error as a result i am not able to save it.
How can i resolve this error.Did i miss any configuration part. Pls guide.
Please find the attachment of screen shot.Hi
Execute transaction code OOHAP_BASIC, you will see list of fields on the left .Please double click on Pushbutton (status Flow) tab. You will see list of pushbuttons on the right. Select your pushbutton and double click onstatus
BR
Anil -
Adding more Push buttons in Status Flow of Objective Settings & Appraisals
Hi,
In my Template Design, under status flow tab, we are able to create new push buttons.
SAP is allowing, to create only upto 3 push buttons per outbound status/sub-status combination.
In our application, we need 5 push buttons in one of the outbound status/sub-status.
Can any expert suggest me what should I do?
Advanced thanks
Regards
Raghu KRaghu,
The "NEXT STATUS" field specifies the status(save &leave or save &display), but you're talking about the status flow change, which is very much possible with in the same tab "Status Flow".
There is a filed called Pushbutton, this is where you select the pushbutton for the form to change the status flow. This staus flow change you can define in the field "TARGET STATUS", if you have any substatus in that status you can define that in " TARGET SUBSTATUS".
I hope this helps.Award points if this resolves your issue.
Regards
Ramakrishna Ramadurgam -
Getting dump while posting goods receipt through TCode migo
Hi,
I am getting dump after I click on post button in TCode 'MIGO'.
Short text
The current application triggered a termination with a short dump.
Short text of error message:
Document number 9 5000000000 2010 was already assigned
Long text of error message:
Diagnosis
Document number 5000000000 in company code 9 and fiscal year 2010
has already been assigned.
System Response
Termination of processing.
Procedure
Check document number range 50 in company code 9 and fiscal year
2010 and correct the number range status if necessary.
Technical information about the message:
Message class....... "F5"
Number.............. 152
Variable 1.......... 9
Variable 2.......... 5000000000
Variable 3.......... 2010
Variable 4.......... 50
So please help me what I can do?
Thanks,
Moderator Message: The short dump is self-explanatory.
Edited by: kishan P on Nov 18, 2010 11:17 AMHi,
plx try to chane the status in IE02
Go to edit ,manual options , in that delete the HU assignemtn
and then save it and come out of it ..
Hope that helps -
FM for getting the SYSTEM STATUS in pp order.
hi,
i wnat to know what is the FM used to get the SYSTEM STATUS in pp order.
and the parametes needed t be passed.HI,
1. go to tcode BS22 (Maintain: System Status)
2. look for the system status TECO.
3. Double click the field "TECO".
4. in the transaction control tab look for the business transaction "RMWA" or goods movement (you can type it in the lower left corner buttom box).
5. select the radio button from "Allowed" to Disallowed".
6. save your changes.
Here are the function moduels:
SYSTEM_STATUS
UPGI22_GET_SYSTEM_STATUS
UPG_GET_SYSTEM_STATUS
TMS_CFG_GET_SYSTEM_STATE
Regards
Sudheer -
Sales order item gets "Fully delivered" status even if partial qty
Hello,
We have a depot sales configuration in SAP. I found that some sales order lines are getting completed (delivery status "Fully delivered") even if partial quantity is pending for the order line. I checked the status in VBUP table where LFSTA gets the value "C" instead of "B". This is happening for some of the order lines (specially orders with small qty, just an observation).
Can anybody help to know why the delivery status change to "C" inspite of partial delivery.
Thanks,
RajeevThanks for your help but your solution doesn't give any clue/solution to my problem
I checked the customer master for shipping-> Partial delivery tab for fully delivered & partailly delivered cases. All the customer masters have same setting. This is confired by checking in the table KNVV.
As explained earlier we have depot configuration & all Sales orders are created with item category "TAB" & there is no completion rule mentioned in VOV7.
Regards
Rajeev -
Getting dump with message CALL_FUNCTION_GET_NAME_FAILED
Hi,
My requirement is to write a report which will be run in background every Monday and the result will be sent to a user as email with excel as attachment.
I tried it by giving the email in 'Spool list recipient' in SM36. ut since the length of the output is more than 255 chars, so i thought of writing the email code as shown below.
DATA: l_message_content LIKE soli OCCURS 10 WITH HEADER LINE,
l_receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
l_packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
l_listobject LIKE abaplist OCCURS 10,
l_compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
lw_object_hd_change LIKE sood1,
l_compressed_size LIKE sy-index.
l_receiver_list-recnam = sy-uname .
l_receiver_list-esc_des = 'B'.
APPEND l_receiver_list.
lw_object_hd_change-objla = sy-langu.
lw_object_hd_change-objnam = 'Selection'.
lw_object_hd_change-objsns = 'P'.
Mail subject
lw_object_hd_change-objdes = 'KRB SAP Inconsistency Report'.
Mail body
APPEND 'Consisteny report between KRB and SAP' TO l_message_content.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = l_compressed_size
TABLES
in = <fs_table>
out = l_compressed_attachment.
DESCRIBE TABLE l_compressed_attachment.
CLEAR l_packing_list.
l_packing_list-transf_bin = 'X'.
l_packing_list-head_start = 0.
l_packing_list-head_num = 0.
l_packing_list-body_start = 1.
l_packing_list-body_num = sy-tfill.
l_packing_list-objtp = 'ALI'.
l_packing_list-objnam = 'Selection'.
l_packing_list-objdes = 'SAP KRB Consistency Report'.
l_packing_list-objlen = l_compressed_size.
APPEND l_packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = lw_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = l_message_content
receivers = l_receiver_list
packing_list = l_packing_list
att_cont = l_compressed_attachment.
I am getting the mail which i checked in SBWP but when i clicked on the attachment i am getting dump with message CALL_FUNCTION_GET_NAME_FAILED.
Short text
Error when starting a Remote Function Call.
What happened?
"CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
error) "
An error occurred when executing a Remote Function Call.
Error analysis
An error occurred when executing a Remote Function Call.
"CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
error) "
Status of connection.... "RFC DRV=??? ???"
Internal error code.... "RFC_IO4"
Internal error: Invalid RFC handle.
Trigger Location of Runtime Error
Program SAPMSSY1
Include SAPMSSY1
Row 266
Module type (FORM)
Module Name XAB_RUN_DRIVER
Please help in this.
<removed by moderator>
Edited by: Thomas Zloch on Sep 14, 2011 11:57 AMHi,
Check your RFC Connection Configuration. Also, check the used username & password.
Reward points if the asnwer is helpful.
Regards, -
Does not show anything in Flow tab in Interface
Hi,
I am new in ODI and doing File to File data transformation. I have done this successfully.
But here I used Global Context.
Instead of Global Context of I used my own Context that I have created in the Overview tab of interface the source , staging and target is not separated in the flow tab.
in overview tab of Interface if I select Optimization Context : my_Own_Context instead of global context and selected SYNOPSIS_MEMORY_ENGINE , in flow tab I got following message and Source, staging,target does not exist here:
the following message I getting in Flow tab:
Grag objects from the navigator here to model them. Alternatively, use the component paletter to create new objects.
Could you tell me why I getting this problem & how to resolve it.
Thannks
Edited by: 949936 on May 7, 2013 3:25 AMHi,
optimization context is used by ODI only to determine if staging source and target are the same or not. If you want to execute in another context you don't need to change opt context, but execute-> select context.
By the way you should have similar architecture between your context. Map your logical schema in your new context, close your interface and re-open it
Let us know -
Tcode FB60 Dump ,while active withholding calculation country in india only
Hi all,
We have implemented OSS Note no 1945137 for amount based tan level exemption for india. and assign withholding tax country IN , at time of vendor invoice posting tcode fb60 , we have getting dump " The feild " I secco " cannot be changed " this dump getting only when i am using withholding tax country IN only not different country. please help me.find the attached file for dump.
Best regardsThanks you sir ,, " Wish you happy new year!!!
As per your reply , my query is resolved , but i have one more query ,, my client is required tds calculate some specific amount for e,g below,
However the formula is calculating correctly for the range till 1000 but above 1000 the formula is not working properly. Kindly help me to resolve the problem. for your reference see above attached scree shot. for e.g
rate amt
10% upto 1000
20% for 1001-2000
30% for 2001 and above.
when i am invoice posting Rs 1000 System calculate proper , when i going to posting invoice Rs. 2000 system not calculate correct amt. system calculate TDS amt is Rs .300 , but in configuration i have maintained 2 % rate. for ref find the below screen shot. Pls help me !!
Please help me sir !!
Thanks & Regard
Jay -
How to increase the width of the second line -status bar -tab --Urgent
Hi all,
We are not able to get the full information which suppose to display in second line in the status bar -tab for e.g --> we are getting only Enter Qu... for the message Enter Query.
We need to display full information. Could anyone help us ?ok, I tested it for you.
IE versus Firefox versus Jini versus sunplugin.
In each version you have too few space for Enter-Query... You have to live with that problem -
Getting Dump in Production system
Hi,
we are getting dump in one customise program due to missing include program.
how to transport this missing program.?
regards,
RameshHi,
run tcode SE10 in DEV system.
click on create -> select workbench request -> enter description of request -> enter
now double click on request -> click change end enter following
In first row
Program ID: R3TR
Object Type: PROG
Object Name: name of include. press enter
in second row
Program ID: LIMU
Object Type: REPS
Object Name: name of include. press enter
then click on release.
import this request in PRD system.
regards,
kaushal -
In MSC2n - Get date in the classification tab from basic data 1 tab
Hi All,
My requirement is as follows.
WHen I execute the tcode MSC2N,
Relevent data for the fields Batch, Material and Plant and hit the enter Key.
This displays Tabs like BASIC DATA1, BASIC DATA 2 , CLASSIFICATION etc.
when I change the production date in the BASIC DATA1 and then click on the CLASSIFICATION tab, the prodiction date should get displayed automatically in this tab.
There is no USER-EXIT or BAdi for this.
I need an enhancement point.
Plz help me .
Regards,
Renuka
Edited by: Renuka Sarode on May 11, 2010 9:51 AMHi Reddy,
Its doesnt work for me...
Plz suggest me som enhancement..
Regards,
Renuka -
Get the inherited status of attributes
Hi All,,
I have a requirement as below:
o Every time the program reaches a line where the attribute ID and/or position ID is different from the previous line or for the first line, all attribute values for the dedicated position and attribute ID that are not marked as Inherited need to be deleted.
For this i want to get the inherited status of the attributes(Whihc is present in my input file)
can anyone help me in this?
Moderator Message: Specs-dumping is not allowed.
Edited by: kishan P on Apr 12, 2011 2:12 PMHi,
Use function module "FTR_IDOC_READ", Output structure "PE_IDOC_STATUS" holds the current status of IDOC number
Regards
Vinod -
Dear all MM experts,
I am getting dump in J1IF13 tcode .
some time it is running smoothly some time giving error what is the actual problem.
The ABAP dump analysis is like see at line 702 .
Short text
Conversion error
What happened?
The current screen processing action was terminated since a situ
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the c
screen.
Error analysis
The program has been interrupted and cannot resume.
Program "SAPMJ1IFN" attempted to display fields on screen 1210.
An error occurred during the conversion of this data.
692 &----
693 *& Module STATUS_1210 OUTPUT
694 &----
695 * text
696 ----
697 MODULE STATUS_1210 OUTPUT.
698 sort itab_excdtl.
699
700 DESCRIBE TABLE itab_excdtl LINES V_LINES_TC_1210.
701 tc_1210-lines = V_LINES_TC_1210.
702 ENDMODULE. " here cursor is coming and getting dump while debugging.
Please help me to come out from this issue.
thanks ,
Sanket.close
Maybe you are looking for
-
How to create a PDF from DWF or Revit with hyperlinks?
DWF file has 20 sheets of engineering drawings. First 10 are plans with section, detail and elevation callouts. In DWF I can click on one of these callouts and be brought directly to the detail sheet with the detail on it (one of the second 10 page
-
Problem setting up Wireless with WAP54G
I am having trouble setting up my wireless network with my WAP54G access point. I have used this same router successfully before but now on my new network it gives me trouble. I did a reset on my Access Point, Then the default setting is with a stati
-
How to setup portal navigation
I am new to the portal and I am trying to setup the following portal navigation Top Level - Reports If user has been assigned the Sales Role, they should see under Detailed Navigation Sales Reports Report1 Report2 If user has been assigned th
-
User level authorization wise F4 help functions
Dear All, We have a requirement i.e. User should be able to see only authorized entities when he/she press F4 on any field like Company code,Customer number,Sales Organization etc.. in any standard screen of SAP transaction codes. For Ex: we have 3 c
-
How do I put Adobe reader on linux
How do I install Adobe Reader on a my chrombook? I also have Linux installed on it as well. But I can't seem to find a download for either.