Phase displays? Compared to what ref?

I am using Labview 7 and I have a question about some of the new features. I am trying to input 2 channels and graph the output amplitude and phase difference. I have tried using the "new" interfaces for "spectral" and "tone" measurements but I am unable to achieve the desired results. I am trying to see the vis that make up those fancy interfaces to see how they work. Anyone know how to view them? How are the phase difference numbers generated in the tone and spectral measurements?
My program is just 2 simple inputs and I would like the signals displayed on a graph displaying amplitude and phase difference. The phase can be a graph or just a simple number indicator. So far no luck with any approach. I have checked the web site
for examples and nothing that simple.
Thanks for any and all help.
Dave

A Phase result can be interpreted in two ways. It can be absolute or relative. For example the Frequency Response VI will return the phase difference between your two input signals as function of the frequency. In other words it is a relative measurement. The Extract tone information returns the absolute (start) phase of your detected sine tone, that can also be viewed as the phase relative the beginning of your signal.
So to measure the phase difference between the two signals run the two signals through the VI and subtract the two phase results from each others the same way you would subtract (or eventually divide) the two amplitude results.

Similar Messages

  • How does low-res videos/movies look on the Retina display, compared to a normal display?

    How does low-res videos/movies look on the Retina display, compared to a normal display?

    What is a "low-res" video? It will look as good as the "low-res" is. If the video is 100px x 100px it will display 100px x 100px unless you stretch or otherwise manipulate it.
    If a "low-res" video is an old 1930's grainy video it will look like a 1930's grainy video.
    Maybe I did not understand your question.

  • HT5299 i have an apple cinema display circa 2005. what thunderbolt adapter do i need in order to be able to plug it into a current mac mini?

    I have an apple cinema display circa 2005. What Thunderbolt adapter will I need in order for it to work with a current model Mac Mini?

    see > I have an Apple Cinema Display ADC. What adapters do I need to hookup my ADC connected monitor to my Mac Mini.
    or > Using Older Apple ADC Displays with Mac Pro - The Mac Observer
    and > Thunderbolt and ADC: Apple Support Communities

  • My sent messages are not displayed...what happened and how do I restore?

    My sent messages are not displayed...what happened and how do I restore?

    http://kb.mozillazine.org/Disappearing_mail

  • I have a grey exclamation mark showing in the middle of my display - regardless of what program I am running....anyone know what it means?

    I have a grey exclamation mark showing in the middle of my Macbook Pro display - any ideas what it means?

    Grey "Exclamation Mark"?
    A yellow means no Mac OS partition for a HDD.
    Maybe you have a power symbol like this one
    If so, your mac is having Kernel Panics.
    Could be caused by a system folder corrupted, faulty HDD, Faulty RAM or FAulty Logic Board.
    What to do:
    - Backup your data (use TimeMachine if possible)
    - Erase your HDD and Make a fresh install
    - If still happens, there is a hardware issue. If works fine on a new install, it was OS, so just start migrating your data back.
    Good luck

  • Macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

    macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

    If you click View, Show Sidebar you will see the other libraries under Shared in the left hand column. Click on the Library you want and you can expand it to select Music, Movies etc. Select whatever items you want and click import if you want to move them to your Library.
    You will have to have all computers authorised with the relevant Apple ID's
    Store  >  Authorise this computer...
    This is separate from the Home Sharing username and password and is to allow playing of DRM Movies, TV shows etc from the other computer.
    If both Computers use the same apple id this step is not required.

  • Did IOS8 upgrade w/iPhone5 / lost names associated when using e-mail - only displaying telephone numbers / what are the steps to correct to show names?

    Did IOS8 upgrade w/iPhone5 / lost names associated when using e-mail - only displaying telephone numbers / what are the steps to correct to show names?

    maybe OP want to extract all numbers from his inbox using regular expressions?

  • Da un po di giorni non funziona più la parte telefonica. Il segnale non compare più sul dislay e quindi non riesco a ricevere ed effettuare telefonate. sul display compare semre la scritta "cerco" o "nessun servizio".

    da un po di giorni non funziona più la parte telefonica. Il segnale non compare più sul dislay e quindi non riesco a ricevere ed effettuare telefonate. sul display compare semre la scritta "cerco" o "nessun servizio".

  • My iphone is displaying revisar adn what should I do?

    My Iphone 4s is displaying "revisar adn", what should I do?

    That is appearing because your carrier offers a service to backup the contacts that are stored on your sim card. Since the iPhone stores no data on a sim card, there is nothing to backup, thus that error message. So, contact your carrier & have them cancel this for your account.

  • Math characters are being displayed incorrectly in a webpage. eg. Þ is being displayed instead of what I think should be ⇒

    I am using Firefox 24.0 in Linux Mint.
    I am currently doing a math test. Incorrect characters are being displayed.
    There are only true/false questions on this math test. The questions on it are supposed to be very easy basic algebra questions, but because the characters are not loading properly, I cannot tell what they are.
    A few examples from the test:
    Are the following statements true or false:
    |-7|=Ö49=7
    Ö8-Ö29=Ö(-21)
    Ö8-Ö29=-Ö21
    3x=6 Þ x=2
    (x-2)(x+2) = 1 Þ x-2 = 1 or x+2 = 1
    Based on how they are being used, I assume Ö should be a √, and that Þ should be a | or ⇒
    What is happening here? How do I fix this?
    Are my guesses correct?

    What font is specified if you check that via the right-click context menu in the built-in Inspector?
    Can you post a link to a publicly accessible page (i.e. no authentication or signing on required)?

  • AS3 - Font Loads but don't display... what might be happening?

    I'm trying to load a custom font to use at runtime in AS3.
    The code seems to work but the font is not displayed properly.
    Could you point what I'm missing?
    [*]The SWF with the font item inside Library, which is
    exported with "GoodTimes" name, using "flash.text.Font" as the
    superclass.
    [*]FLA and its respective AS document class file. The code is
    quite simple, look:

    reseting the System Management Controller won't wipe my SSD drive will it?
    No, but if you don't already have a backup, you must back up immediately, before you reset the SMC or do anything else.

  • What is the caching mechanism firefox 3.6 uses compared to what IE 6/7 and 8/9 use?

    I just need to know how firefox handles/takes care of/and does its work with cookies and cache, basically its caching mechanism. Also comparing it to IE versions 6/7 and 8/9 would help, for the sake of web development with respect to the two browsers (Detailed technical answer would help). Since web apps may sometimes work on firefox and sometimes not while it works in IE just fine.

    Hi Kellymarr,
    You can take a look at the release notes for each version to see what has been added or fixed:
    http://www.mozilla.org/en-US/firefox/4.0/releasenotes/
    Just change the version number in the url to see each major release.
    Hopefully this helps!

  • Still not possible (4.0 EA3) to copy displayed column headings from ref cursor output.

    Hi,
    I've created an enhancement request to allow displayed column headings from ref_cursor output to be copied.
    This is still not possible (4.0 EA3)
    The ref cursor data can be copied, but not the headings..
    See July 2012 discussion of problem in comments at
    http://www.thatjeffsmith.com/archive/2011/12/sql-developer-tip-viewing-refcursor-output/

    Hi,
    I think you're out of luck... except if you're on 11g where you can use DBMS_SQL.TO_CURSOR_NUMBER to convert the REF CURSOR to a DBMS_SQL cursor, and then benefit from the DBMS_SQL package to get column details.
    http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28419/d_sql.htm#CHDJDGDG

  • GP: Display Collable Object, what does it do exactly?

    Hi all,
    does anyone remember what a Display Collable Object is good for? You can add it to an action (in addition to the Execution Callable Object).
    So what is the purpose of the Display Collable Object?
    Could it be, and that's my own guess, just any kind of CO you define, which will be performed when you return to the respective action, once you have finished it earlier?
    And then, does it have access to any parameters in GP context?
    I mean, if I use the same CO as Display CO and Execution CO and having them acccessing the same data, the display CO could serve as a history record of processed steps, right?
    Thx
    Xiaoi

    Hi Xiaoi,
    your suggestions are absolutely correct.
    You should just take in mind, if you put the same CO, which you have attached in execute mode into the display mode and lets say it is a WebDynpro Comp. with process controls buttons (GP Interface), you will also see the buttons in the display mode (when returning to the executed step) and by pressing them, GP will through an error, because the object is already executed (=locked).
    Regards,
    Salvatore

  • "Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers." What does this mean? Need help urgently!

    Premier Pro CC will not open, even though all my computer software is updated. It comes up with the message every time I try and open it. "Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers and start again." What does this mean? I have been searching the internet for an answer for hours. Urgent help needed.

    Error "Premiere Pro could not find any capable video play modules" | Startup 

Maybe you are looking for