Phase One RAW file support needed

Full support for Phase One files would be nice.
If you plug in a CF card containing Phase One RAW files, Lightroom pretends to import them but it only imports the thumbnails. The work around is to download the CF card files to the hard drive and then ask Lightroom to import the folder. Once this folder is in Lightroom you can then ask for DNG conversion. It's a bit of a pain to say the least. I expect it's Phase Ones fault for chosing .tif as the extension for it's RAW files.
Any better workarounds out there?
Damien.
PS: I love Lightroom and welcome further development.

maybe i was doing something wrong, but i had no problem working with p20 and p45 raw files in lightroom. i did not import them from a cf card, though, as they were already on a hard drive.

Similar Messages

Phase One Raw File have lines in them (Lightroom 2.1 ACR 5.1)

when importing Phase One P25 raw files, Lightroom is displaying tin lines across the image. those lines are not appearing in any of the Capture one Software 3.7 4.1 or 4.5 I guess ACR is not reading the Digital Back Calibration Data. I am managing thousands of Images in Lightroom and I don't want to move back to Capture one as it is very limited in terms of its meta data management and no spot removal yet.
if I convert the Raw file (IIQ Small or Large) to DNG using Capture one then Lightroom reading the DNG file without the Lines but the file size is 44MB instead of 15MB of the IIQ Small (Phase One Raw Format). obviously duplicating all my images to DNG Quadrupling disk space is not something I want to add to my workflow.
Adobe, can you improve the way you read the Phase One Raw Files?
I use Phase One P25 Digital Back with the latest firmware 3.6 , Windows XP 32 and 64bit and Lightroom 2.1 (this problem appears on all Lightroom Versions including 1.4,2.0,2.1)
I can send to adobe some Raw File Example or assist in any way I can to find a solution.
Please Help!

Following does not alleviate the problem, but it may shed some light on the underlying reason.
Phase One are fooling their customers with the promise of 16bit depth. However, in fact that is only 14 useful bits; the two low order bits *must not* be used, for they represent mainly the pecularities of the hardware.
The following capture is from a P25+ raw image (converted in DNG by the Adobe DNG converter), but only the two low order bits are processed. These should be random on their own, as theoretically they would represent the finest transitions. The two thin vertical lines show the seams between the chips; their location depends on the particular camera copy (I have seen one or two seams, i.e. the sensor is made out of two or three chips, but perhaps there can be more).
The horizontal stripes cause posterization if an extremely underexposed image's brightness gets adjusted; the seams can become visible as thin lines.
The image is in the "native" (landscape) orientation. The orangy rectangle is not part of the image.
http://www.panopeeper.com/Demo/PhaseOne_P25Plus_SensorSeams.GIF

Phase One raw files can Lightroom read it?

Phase One raw files can Lightroom read it?

Yes, Lightroom 4 can read Phase One files.
Phase One
Raw image filename extension
Minimum Camera Raw plug-in version required
Minimum Lightroom version required
H 20
TIF
4.1
1.1
H 25
TIF
4.1
1.1
IQ 140
TIF
6.5
3.5
IQ 160
TIF
6.5
3.5
IQ 180
TIF
6.5
3.5
P 20
TIF
4.1
1.1
P 20+
TIF
4.2
1.2
P 21
TIF
4.1
1.1
P 21+
TIF
4.2
1.2
P 25
TIF
4.1
1.1
P 25+
TIF
4.2
1.2
P 30
TIF
4.1
1.1
P 30+
TIF
4.2
1.2
P 40+
TIF
6.5
3.5
P 45
TIF
4.1
1.1
P 45+
TIF
4.2
1.2
P 65+
TIF
6.5
3.5

Exporting Phase One Camera Files

I'm confused...
It showed in the Richard Burbridge using a Phase One back in the demo.
I can't get any of our Phase One raw files to export larger than the 72ppi. I'm I doing something wrong?
Hollis

Hi Hollis, welcome to the forum.
Aperture doesn't support RAW files from any MF back (yet?) - what you are getting is based on an embedded thumbnail.
I guess that the video cheated somewhat by having Capture One doing the converting and dropping the results into a hot folder to import that into Aperture.
Ian

Panasonic Lumix FZ1000 RAW files support in Lightroom 4

http://blogs.adobe.com/lightroomjournal/2014/07/camera-raw-8-6-and-dng-converter-8-6-now-a vailable.html
The above says that Panasonic Lumix FZ1000 RAW files are supported in camera raw 8.6. I specifically checked before buying the camera. Everything I have ever read on the Adobe website for some 3+ years said that if a file in supported in Adobe Camera RAW, it is also supported in Lightroom. Particularly, the above URL did NOT give any warning about the FZ10000 RAW files NOT being supported in Lightroom 4. I went ahead and purchased the FZ1000, only to find I'm now having problem with Lightroom 4 not recognising the RAW files at all. I'm really annoyed, as I was so careful to check the Adobe website first. WHAT THE HELL IS GOING ON WITH CAMERA RAW AND LIGHTROOM?????

I do appreciate the many RAW file formats being created by the camera manufacturers, as I have had varying cameras with the varying formats, and so am very aware of the whole business of making sure how those formats will fit into my software. And, as already stated, appreciate Adobe's efforts to deal with all those formats.
This whole exercise has been upsetting, and there has been some good advice and info provided in this discussion.
And unfortunately, some input that has been a little too technical and not particularly helpful. I feel that some of the input was a little too critical and didn't recognise that maybe some of us aren't so are highly involved and knowledgeable in Adobe products and the technicalities of how the software works, dot versioning of software, executable coding etc. because we don't need to, and shouldn't have to. I have bothered to learn Lightroom well in terms of its functionality including matters raised by you (eg making LRoom edits visible in other software, knowing that LR is not making changes to the actual files, rather they are in sidecar or xmp files etc.). I have bothered to learn a reasonable amount of computer-related info to understand things in plain English terms, such as "to have PShop and LRoom to recognise my RAW files, I need to have ACR. To have them run on my PC, they must be compatible with Windows operating system version xxx. For many people, this level of knowledge should be enough.
I have NOT said I expect Adobe to get advance copies of file formats from manufacturers; I have NOT said that I expect Adobe to support every new camera model immediately.
The technicalities of the coding and whether Lightroom "uses" the ACR plug in or not is not quite so much the issue, and I don't find the statement that "Lightroom does not use the Camera Raw plug-in" helpful. I don't think it's really right either. Lightroom - one way or the other - DOES "USE" ACR as the ability of Lightroom to recognise files is very much dependent on the version of ACR that you have. LRoom may not use the ACR plug in as PShop/Bridge in the exact same way (eg for the actual editing of files such as exposure, white balance etc.), but Lightroom DOES USE the ACR PLUG IN.... in regard to the file recognition issue.
And Yes.... I made a mistake. Somehow, despite what I thought were good efforts to research the Lumix's support in PShop CS6, Bridge, ACR and Lroom 4, I got it wrong. I will accept that it was my mistake and I'll accept my part in this, but I won't be made to feel that that it's been "totally" my fault, stupidity, whatever.
Thanks to all the people who have provided useful comment and input to my original question and subsequent responses throughout this discussion. I will indeed now consider options like the DNG converter. I was aware of the whole cloud thing, and had been thinking I would upgrade in perhaps a couple of years time (for both Pshop and LRoom) - I'll have to consider upgrading sooner rather than later.

Phase One EIP Files?

Can the Adobe DNG Converter 5.3 open and convert Phase One P65+ files to DNG?
Checked the Adobe camera support screen and found every Phase One model supported except the P65+ and no mention of EIP files.
Thanks
Gene

genosmm wrote:
Can the Adobe DNG Converter 5.3 open and convert Phase One P65+ files to DNG?
Not really, at this point if you want DNGs, take the original raw into Capture One 4.x and save them out as DNGs from there...then Camera Raw 5.3 can open them.

Olympus e-m5 mark ii raw file support missing in camera raw (pse 13)

Olympus e-m5 mark ii raw file support in camera raw (pse 13).
I cannot open an .orf file from the em-5 mark ii even after installing latest updates for pse13 / camera raw.
Do I have to wait for support to be added by adobe / olympus, or can I do anything against myself.
Thank you,
Peter

You do have to wait, yes. The last updates to Adobe software came out in mid-December and the camera was not commercially available until some weeks or months after then. There is software from Olympus, and perhaps a few others companies that will work, but nothing that will do Adobe rendering, yet. You could use the Olympus software to create TIFs from your raw images and edit those in Photoshop Elements or just shoot RAW+JPG and edit the JPGs until there is an update from Adobe.
I would expect the next update to Adobe software to have support and it's been about 3 months since the last update so one would normally be out about now; however, I think Adobe is actually going to release an entire new version of Lightroom and the camera-raw plug-in with matching functionality, perhaps synchronized with a new version of PS, and if so there are many more things to get working properly before an update can be released. It's possible that updates were planned by this time, and there have been too many bugs to get ironed out and maybe Adobe would release at least a beta DNG Converter that understands the new cameras so people can do something while waiting for the main releases of the new software, but that is more my speculation than anything Adobe has said.
Here is what Eric Chan, and Adobe Camera Raw Engineer, said recently, about the prospects of supporting your camera or any newly released camera:

Nikon D40x NEF raw files, Support for

Need Support for Nikon D40x NEF raw files
Also needed in CS2, CS3

See
Here!
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

How to open more than one RAW-File by drag&drop/doubleclick with CS2?

Hello,
is it possible to open more than one RAW-file from iPhoto with Photoshop's RAW-converter in just one single step? If I drag&drop my selection to my Photoshop-Icon, PS opens just the iPhoto-created library-JPGs of the RAW-files but not the RAWs itself (I've turned out the copyying of the imported photos to the iPhoto-library. Instead iPhoto seems to create a JPG for the library from every RAW I import). If I doubleclick a selection of RAWs in iPhoto just the doubleclicked RAW-File will be opened in Photoshop. Is it possible to select more than one RAW-file in iPhoto and get Photoshop to open all the selected RAWs but not the JPGs? It would make my work a lot easier... thank you.
rockenbaby

hello
try selecting the photos that you want however many- go, File then Export.
you can make all your file selections image size etc and then save them direct to your PS file.
hope this helps.
cjp

How do you overlap PDF's and finish with one PDF file? Need help ASAP

how do you overlap PDF's and finish with one PDF file?
Need help ASAP

I'm not sure if you can do that with CreatePDF. Try it; you got one free use when you sign up with Acrobat.com
If not, you will have to use Adobe Acrobat; there is a full-use 30 days trial.

Sony cameras A7 raw files support?

looking for Sony A7 raw files support for i-photo.

1. Well that's not actually true. There is frequently a lag between the release of the camera and Adobe offering Raw support. They are often faster to add it, true, but they do not "always" get converters out before the camera hits the market.
2. I'm not really sure just what this proves, of course. How often do you change cameras?

Raw file support for HS50EXR in LR4

When will raw file support for the new Fuji HS50EXR camera be added to Lightroom 4?
I noticed the the other fuji cameras from the HS/EXR range are supprted but the new HS50EXR has not been added as yet...can i hope that raw file support for the new Fuji HS50EXR camera will be added real soon?...please!

I suspect it might have been released a bit late for the next camera update version, it really depends on how soon Adobe get their hands on a camera.

Phase One .capture files

Hello
According to the Camera Raw readme file Phase One files should be supported. But I cannot get this to work. I have a bunch of .capture files shot with a P25 - but neither Bridge, ACR 4.4.1 or Lightroom 1.4.1 knows what to do with these files.
What's wrong? Aren't the .capture files supported after all?
(I'm on a Mac Pro, Leopard, CS3)

Peter, as Thomas said, even with the .TIF extension they are indeed raw files. Ive never had any issues with either P25 or now P25+ flies opening in CR or LR.
Perhaps a bit more info would be helpful are you seeing any previews in Bridge or just a generic file icon? Have you tried purging the cache in Bridge? Any error messages popping up?
Ive never shot tethered so I suppose there could be something happening in C1 but it would seem unlikely that it would alter the original raw file.

Fuji raw files support

I've got a macbook air Processore 1,7 GHz Intel Core i5, Grafica Intel HD Graphics 3000 384 MB, Software OS X 10.9 (13A603), Aperture version 3.5.1, raw 5.01 build 718.1, digital camera raw support 5010, build 91.8.
When browsing thumbnails of the raw files from Fujifilm X100s or Fujifilm xpro-1, the image disappears and a meesage comes out saying that file type is not supported. Sometimes they work for a while than suddenly get into the error and don't work any longer.
Is there a solution or shall I throw away Aperture and move to Adobe?
Thanks in advance for your attention.
Gianluigi

Raw support is camera specific - it needs to take into account the sensor characteristic, and if possible, the lens.
The Fujifilm X-E1: http://www.dpreview.com/reviews/fujifilm-x-e1
Fujifilm X-E1 key features
16MP X-Trans CMOS sensor
ISO 200-6400, 100 - 25600 expanded (JPEG only)
2.36M dot OLED electronic viewfinder
New kit zoom: 18-55mm F2.8-4R
Same control layout as X-Pro1, including top-plate shutter speed and exposure compensation dials
2.8" 460k-dot LCD
Built-in pop-up flash
Full HD movie recording with built-in stereo microphone
2.5mm stereo microphone socket
Compatibility with wired remote control units (via either the USB port or mic socket)
Available in silver or black
http://www.dpreview.com/previews/fujifilm-x-e2
Fujifilm X-E2 key features
16MP X-Trans CMOS II sensor
EXR Processor II
ISO 200-6400, plus 100 - 25600 expanded (JPEG only)
7 fps continuous shooting; 3 fps with continuous AF
Lens Modulation Optimizer (for sharper JPEGs when shooting at large or small apertures)
2.36M dot OLED electronic viewfinder
Top-plate analogue shutter speed and exposure compensation dials
3" 1.04M dot 3:2 fixed LCD (non-tilting, not touch-sensitive)
Built-in Wi-Fi for image transfer to smartphones or computers
Full HD movie recording (1920x1080, 60fps, 36Mbps bitrate), with built-in stereo microphone
2.5mm stereo microphone socket, also accepts electronic remote releases
Available in silver or black
The sensors do differ, the lenses are treated differently, the X-E2 can record 14bit raw. It definitely needs a different raw support.

IOS 4.2, raw file support changed?

Since the 4.2 update, photo apps such as Photogene, PhotoForge, Filterstorm no longer work with imported raw files (Nikon NEF from a D50 at least). They either crash or only load the tiny preview image. JPEGs don't seem to be an issue.
Is this a bug in 4.2 perhaps, or have the APIs changed and I need to wait for the app developers to catch up?

I have the same problem with my Pentax RAW files (PEF from K10D). In my case it just always crashes Photoshop Express and "Best Photo".
Glad to see I'm not the only one. I can't find any discussion of this problem elsewhere.

Phase One RAW file support needed

Similar Messages

Maybe you are looking for