Phaser 8860 and Dell Laser 5330dn
I am unable to see the printers (just got the Dell - my institution got them with a package deal) on the Bonjour using 10.6. I called Dell to help for on the machines that are running 10.5.x, because the machines were seeing two names on the Bonjour (the serial with the name like Dell5330dn(xxxxxx) and the one I set (Dell5330dn(RM*)) for the same printer. Dell immediately said they do not support Macs and that I would have to get to Apple for the support. They do not understand that this is also seen on the PC if they were using Bonjour as well. Well, any ways that was a lost cause so I hope to have help here.
The funny this is that on 10.6.1, I was able to see the HPs but not the Xerox and the Dell unlike on the 10.5.x machines where I just not only see the names I called it but it's original in the Bonjour set.
So, what I did is added through the IP through Internet Printing Protocal (IPP). It found the printers - insure they were valid - but they did not set the proper drivers (it choose Generic) so I change it for the Xerox but left the Dell alone with the Generic. I added them and try to print.
First, it took forever (well a minute but that is still long) to get to the print screen. I first select the Xerox and it took a long time before the software paused the printer. I then tried to print to the Dell and it did the same thing. Also, now this is a little weird, I try to print to one and then as soon as I can print to the other at the same time. It would immediately pause the first printer as soon the other is selected where eventually it also paused.
I am at my wits end and I may have to consider other options. I still do not under stand why they did away with Appletalk. It should have stilled been able to be modified for the unix system where we can see the list of printers on the default off the bat. That was the beauty of the Mac OS system. I guess it goes by the motto if it works successfully for so long lets not use it. I had just got these printers in and I do not want to go back like I did when 10.0 came out and have to buy nothing but new systems, that is just not cost effective. I may have to wait or see if I can knock the system to 10.5.x. By the way, is that possible for the newest machines?
So, does anyone else have a fix for this? And yes, I did use the newest download from the Xerox site for the driver (even through the software was unable to see the printer) and installed it so I can select it with I did the IPP in the Add Printer menu.
Well, I found a fix for the IPP pause. I needed to put a fixed (static/manual) IP on the printer itself. It cannot stand it if it's DHCP. I guess when I used the host name of the printer to be found and validated, it made the printing a little flaky when searching for the printer name - still do not understand this since it found it before when adding the printer.
So, this time when going through adding the printers again, I put the IP (set to static through the browser onto the printer or through the printer's menu if possible and gave it an IP) of the printer in the Address and waited to be valid, then gave it a name in the Name section for it and selected the driver. This is through the IPP of the IP menu in the Add Printer of the system prefs.
The drivers used for the Dells is the Samsung CLP 700, Xerox gets the Xerox driver for it, and HP 4240 I used their driver for it as well. All of them are working (cross my fingers) with no pausing and successful printing for the past two days.
Now, I have to go and fix the 10.5 problem of them being on all of the list of Bonjour. Reason, is that some of the machines are still PPC and not intel. I just may have to try in turning off the "Bonjour" and then add the IP instead if that is the way to do it since this is going to be the way for 10.6
Similar Messages
-
I am looking for a small Dell black and white, laser printer like the Energy Star 1133 that is compatible with my macbook, 10.6.8. I would like to buy a new computer in the near future so would need it to be work on my next computer also. Any suggestions?
MacBook, Mac OS X (10.6.8)I am looking for a small Dell black and white, laser printer like the Energy Star 1133 that is compatible with my macbook, 10.6.8. I would like to buy a new computer in the near future so would need it to be work on my next computer also. Any suggestions?
MacBook, Mac OS X (10.6.8) -
Dell laser 5100cn and a dell laser M5200.
Okay the two printers are a dell laser 5100cn and a dell laser M5200.
The emacs that im trieing to comunicate with a Dell laser M5200 are running 10.3.9 and the printer is using a static IP. In the print q I keep getting an error message that says network host is busy.
The emacs that are taking 40 minutes to print when printing from a photo editing aplication are running 10.4.8 and the dell 5100cn there also has a static IPThe Foomatic-RIP is not a driver per se. It is typically used along with ESP Ghostscript and a third party driver. I know of no specific Mac OS X or *nix for Dell printers. That does not mean they cannot be made to work.
The main obstacle in getting rebadged printers to work is finding out what printer language they use. Knowing the comparable make and model to the Dell printer is an ideal situation. That hardly ever happens however.
I have posted a response in a similar thread that details how you can find out the printer language(s) your printer understands. This only works with USB printers, however. You can view my post here.
If you can post back the results from the Terminal command in that post, we can hopefully find a driver that will work for your printer.
Matt
Mac Mini; B&W G3/300 -
Xerox Phaser 8860 on Network-How to turn off popup print job confirmations?
I recently upgraded to OS 10.6.4 and as expected I needed to reinstall the drivers for a few peripherals. One of which was the Xerox Phaser 8860 which is on the network. Everything works, but now after each print job prints out a window pops up in the center of the screen notifying me that ::Job### has printed on Xerox Phaser 8860::. It causes no serious problems, but it does knock me out of what ever program I am using. Which can get extremely annoying when I'm drawing and I repeatedly get halted mid (pen/brush) stroke. It stays up on the screen for about a minute and a few times it has remained up. There is an option to close, it simply gets really annoying after the 30th time. Common sense would suggest to not draw while a file is on it's way to the printer, but my work day is a constant flow of drawing, printing, color tests and editing. It's not practical or good for deadlines to stop drawing to wait for a print job to come out and the pop up window to go away.
I tested printing from the other computers, which are PC's using various versions of windows and they all come up with the same pop up window (though theirs come up at the bottom right of the screen). They do not receive confirmation windows from the other printers not on the network.
This suggested to me that this was a setting with the Xerox software. However, I spoke to the technical support for Xerox and they said that the pop up window had nothing to do with their software and claim that it had to be generated by the Mac OS 10.6.4.
I am regularly printing from the following programs:
Photoshop, InDesign, Illustrator, Adobe Acrobat, Word, and Excel. The pop out window has acquired while printing files from all of these programs. I doubt that has any relation but I thought I'd add it, just in case.
I would very much like to know how to turn this confirmation notification off in OS 10.6.4. Or if anyone has an thoughts on what software could be the culprit.In CWIS go to Properties > General > Printer Defaults and disable the Startup page As for garbage prints, That sounds like a PS error. And they are almost always due to improperly embedded fonts. Have all your users switch the following in their drivers (Picture is the global driver, but the regular driver will have the same option.) Essentially by default the printer uses its own locally stored fonts on the jobs, but when the fonts are misunderstood, or unknown it winds up printing wingdings.
-
Problem with printing to a Dell Laser Printer
Just switched to CS5 Indesign. Trying to print to a Dell laser 1720dn printer. The printer is returning am Error message;
ERROR: undefined
Offending Command looks like 0e ligature
STACK:
17.9807
-mark-
-dictionary-
INDesign CS4 had no problems and the page prints to an ink jet printer without any problems
Any help would be appreciated.
MayavaseThanks for your reply.
I should have mentioned I am using Windows XP.
No, there are no eps graphics in the document.
Photoshop CS5 prints with no problems. I did a work-around by making a PDF and printing from that.
As I mentioned there was no problem printing from the CS4 version.
This may be a similar problem to the TWAIN problem in CS4.
Again Thanks,
Justin Kerr -
MDT 2013, Deploying Windows 8.1 on Surface and Dell Venue Tablets
I'm having numerous issues with Capturing Images and Deploying to Windows 8.1 Tablets. We are currently using Surface Pro 1, 2, and Dell Venue 11 Pro tablets. I am using a Windows Server 2012 computer with MDT 2013 installed. I can't get the tablets
to:
1-sysprep and capture using MDT 2013
2-Deploy a Task Sequence with a WIM and other applications attached. (I've tried using the simple standard task seq option with no luck)
3-I found another way to get a WIM (using imagex) but when i deploy task sequence it ignores my selection of applications to install outside the WIM and only installs the WIM (WIM 14gb = Win 8.1 Ent, Office 2013 x32, MS Updates)
Any help would be greatly appreciated. Everything is being performed within the LAN and with USB 2.0 thumbdrives for media.Hi altimav8,
Are you trying to find out how to deploy Surface Pro method? Before capture the Surface pro image please download the latest drivers for the surface and made sure that they
were the only drivers that were going to be deployed. There have a specific MDT deploy support forum more about the MDT deploy related issue you can ask in MDT support forum.
MDT support
forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=mdt
The related guide:
Surface Pro - Enterprise Deployment Quick Start Guide
http://download.microsoft.com/download/2/0/7/2073C22F-2F31-4F4A-8059-E54C91C564A9/Surface%20Pro%20-%20Enterprise%20Deployment%20Quick%20Start%20Guide.pdf
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Macbook (late 08) 13.3" -- miniDV to DVI adapter and Dell 24" 2405 FSP Flat
All
Just purchased a Macbook 13.3" and bought the miniDV to DVI adapter for my 24" Dell 2405 FSP. For whatever reason, I cannot get system prefs to "detect display".
I am not sure if the cable is broken out of package or there is a problem with this adapter in general. I am trying to use the cable to view OS/X and XP Home via Bootcamp on large screen while Macbook is in clamshell (closed) mode.
Seems like a lot of people are having issues but I don't know what to do. It seems the cables from Apple vary by model and worse, appear to be lower quality than most would expect. Any thoughts on commands or steps to try and diagnose. Or should I buy the miniDV to VGA adapter for the Dell flatscreen?Update to this issue.
1. Friend brought his Macbook Pro 17" with full DVI adapter to my Dell 2405 FPW -- he has same 24" flatscreen. It works -- so monitor is fine.
2. I went to Apple Store and REPLACED miniDV to DVI adapter to my monitor. No response. Not registering at all. But when friend hooked his Macbook with adapter, the screen came on.
Assumptions:
1. Macbook 13.3" aluminum port is damaged -- will go to Apple to confirm
2. Odds of two adapter cables not working - highly slim (got from two different stores if we want to shake the odds a bit more based on batch shipments
It appears that the port is NOT compatible with this monitor OR the cable quality is so bad that I have to go through a bunch of them.
Last option - miniDV to VGA adapter to my Dell monitor to see if that works. But it is one of two options -- from my perspective:
1. Monitor/port incompatibility
2. Bad cables
I even tried XP Home Edition under Bootcamp with the adapter and monitor did not display.
What's disappointing in all of this is Apple tech support told me to download "drivers" from Dell's site -- and puzzled, I asked if Dell was supporting Mac computers because OS/X did not have drivers for this monitor and Dell only has it themselves - they emailed me download links (which is convenient) but it was clear that she doesn't know what she was doing -- the links were XP and Vista only.
Sigh...Rev A Macbook. Will probably need Apple to work on this issue. -
ATTN: Oracle North American Payroll Customers:End of Year Phase 1 and Q3...
ATTN: Oracle North American Payroll Customers: End of Year Phase 1 and Q3 2007 Statutory Update Released!
Dear Oracle North American HCM Customer,
North American End of Year Phase 1 and the United States (US) Third
Quarter Statutory Updates (Q3), 2007 have been released!
US Q3 2007 Statutory Update patch numbers:
* R11i: 6155000
* R12: 6155000
*Note – FPK RUP2 is not required for the US Q3 2007 Statutory Update
End of Year Phase 1 (includes Q3 Statutory Update) patch numbers:
· R11i: 6133333
* R12: 6133333 (targetted for October 8th release)
We would like to make you aware of several important points. Please read
this entire note carefully.
1. US Q3 2007 Statutory Update highlights
2. End of Year Phase 1 highlights
3. Other Important Notes
4. Lifetime Support Policy: Coverage for Applications
5. R11i HRMS Product Information
6. Payroll Recommended Patches
7. HR Recommended Patches
8. Other Information
A. US Q3 2007 Statutory Update highlights
* JIT and School District Updates
* Miscellaneous Statutory Bug Fixes
Please see the readmes on Metalink for full details:
3rd Qtr 2007 US Payroll Readme for Rel 11i – Note: 458431.1
B. End of Year Phase 1 highlights
US:
* JIT/Geocode updates
* Annual Geocode Patch Released
o Patch 6117000 11i one-off released 04-Sep-2007
o Included in EOY Phase 1
o Readme Note: 456835.1
* Wage Accumulation
o Significant enhancement to the way the application
accumulates wages for reporting
o Joint project with Vertex to enhance processing of
reciprocity rules at state and local levels
o Changes within the Vertex engine allow for improved handling
of multiple work jurisdictions
o Provides users with the ability to control how work taxes
affect taxes at residence locations and if wages should be
accumulated at employee’s residence location
o Readme Note: 460678.1
o
Note:
Quantum 2.9.1 will be the pre-requisite for End of Year 2007 processing
Additional Updates included in 2.9.1:
o 5520588 – Resident State Tax Not given credit for Work State
County Tax Withheld (Lives in NY works where ‘local’ tax is
withheld)
o 5897764 - FIT W/H Should be 35% After $1M Supplemental Wages
even if Employee is Exempt
o 5937604 - Delaware state income tax is being over-withheld
on the second (and subsequent) supplemental payments in the
same pay period.
o 5730236 - YTD EI Deduction Stopped at 729.29 INSTEAD OF 729.30
Evergreen Forms:
The following forms are available from Evergreen for W-2s and 1099-Rs
· Blank perforated W-2 #5208 Window envelope 4444-1
· Blank perforated 1099-R #5179 Window envelope 6161-1
· Preprinted W-2 #5218 Window envelope 5151-1
· Preprinted 1099-R #7159-4 Window envelope 7777-1
**Note: This is the last year we will support the preprinted W-2 and
1099R. For EOY 2008 we will only support the pdf version of these two
reports that print on blank forms.
Customers can order forms at 800-248-2898 or go to www.evergrn.com
<http://www.evergrn.com>
RR Donnelley (formerly Moore) Forms:
The following forms are available from RR Donnelley (formerly Moore) for
W-2s and 1099-Rs
* Blank perforated W-2 (with printed instructions on back) -
LW28700BW (50 PK)
* Blank perforated W-2 (with printed instructions on back) -
LW28700B (2000 BULK)
* Blank perforated W-2 (blank on back) - LW28700BLANKW (50 PK)
* Blank perforated W-2 (blank on back) - LW28700BLANK (2000 BULK)
* Window envelope for W-2 - 7987E
* Blank perforated 1099R (with printed instructions on back) -LR4UPB
(50 PK)
* Blank perforated 1099R (with printed instructions on back)
LR4UPBBULK (2000 BULK)
* Blank perforated 1099R (blank on back) - L4UPBLANK (50 PK)
* Blank perforated 1099R (blank on back) - L4UPBLANKBULK (2000 BULK)
* Window envelope for 1099R - DW4ALT
Customers can order forms at 877-526-3885 – reference Oracle customer #
521836
Canada:
* Miscellaneous Bug Fixes
Mexico:
* Miscellaneous Bug Fixes
Please see the readme on Metalink for full details:
US 2007 Payroll Year End Phase 1 Readme Rel 11i Note 456990.1
US 2007 Payroll Year End Phase 1 Readme Rel 12Note 456991.1
MX 2007 Payroll Year End Phase 1 Readme Rel 11i NOTE.458559.1
MX 2007 Payroll Year End Phase 1 Readme Rel 12 NOTE.458566.1
CA 2007 Payroll Year End Phase 1 Readme Rel 11i NOTE.458561.1
CA 2007 Payroll Year End Phase 1 Readme Rel 12 NOTE.458563.1
C. Other Important Notes
US Check/Deposit Advice XML
There are some additional dependencies for this patch that were not
originally communicated. Applying the EOY Phase 1 patch first satisfies
these dependencies. If there is a need to apply this patch prior to
applying EOY Phase 1 we are exploring possible alternative
pre-requisites and will send out a notice late next week with more
information.
* 11i one-off Patch 6399100 released 21-Sep-2007
* R12 will be part of Release Update (RUP) 12.0.4
Oracle will de-support the Live Checkwriter and Deposit Advice for US
and Canada beginning with 2007 EOY Phase 1. Archive Checkwriter and
Deposit Advice will continue to be supported. What this means is that
new code changes and bug fixes will not be tested on the Live
Checkwriter and Deposit Advice. Additionally, enhancements made to the
Archive version will NOT be made for the Live version.
Desupport of Standard Tax Interface
Oracle no longer supports the Standard Tax interface. Taxes will
continue to be calculated and tax rate changes from the Vertex Data
Updates will continue. New code changes and bug fixes will not be tested
on the Standard Interface and we cannot guarantee that all functionality
will continue to work. Additionally, enhancements made to taxes will NOT
be made for the Standard Tax Interface. We strongly recommend that you
upgrade immediately to the Enhanced Tax interface.
Vertex Customer Café:
The Customer Café is a comprehensive online information source
specifically for Vertex customers. It’s easier than ever to get the
support and information you need to maximize your investment in Vertex
products. Some of the many benefits to using the Customer Café include:
o Access to monthly data download files, release bulletins, schedules
and considerations.
o Early notification bulletins, late rate notifications, and support
notices.
o Online Knowledge Center that provides quick answers to questions and
issues.
o Online inquiry submission
o Access to fully-indexed online documentation for all Vertex software
products.
o Easy access to Vertex software training information and registration.
To register for the Customer Café, just visit the Vertex website at
www.vertexinc.com <http://www.vertexinc.com/>.
Year End Information for Payroll:
Family pack K rollup 2 (5337777) is mandatory for R11i Year End and is a
pre-requisite for Year End Phase 1. This patch was released on Friday,
June 22, 2007.
The R12 RUP (12.0.2) is mandatory for year end for R12
For the complete R12 Payroll Mandatory Patch List see Metalink Note 386434.1
For the complete R11i Payroll Mandatory Patch List see Metalink Note
111499.1
<http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=111499.1
<http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=111499.1>>
For additional non-mandatory North American Payroll patches see Metalink
Note 74292.1
<http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=74292.1
<http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=74292.1>>
D. Lifetime Support Policy: Coverage for Applications
Important Reminder:
Please pay attention to the Oracle E-Business Suite Support dates for
your point release. Statutory or regulatory updates are not available
beyond the ‘Extended Support Date’.
11.5.7 came out of Premier Support in May 2007
11.5.8 will come out of Premier Support in Nov 2007
11.5.9 will come out of Premier Support in Jun 2008
Extended Support has not been offered for 11.5.7, 11.5.8 or 11.5.9
Premier and Extended Support include - Tax legal and regulatory updates
Sustaining Support Does NOT include new tax, legal, and regulatory updates.
For the full definitions of what this means to an 11.5.7/11.5.8 customer
please read the full fact sheet available at:-
http://www.oracle.com/support/library/data-sheet/oracle-lifetime-support-policy-datasheet.pdf
*NOTE: For 2007 Payroll Year End, minimally you will need to be on 11.5.9.
E. R11i HRMS Product Information
For the latest Oracle HRMS Product Family - Release 11i Information,
please see Metalink Note:135266.1
This page contains important information including:
* High Priority Alerts
* Mandatory Patches
* Family Packs and Minipacks
* Latest Legislative Data - hrglobal.drv
* Maintenance Pack Information
F. Payroll Recommended Patches
The Payroll recommended patch spreadsheet Metalink Note 74292.1 contains
additional features and functions.
G. HR Recommended Patches
The HR Recommended spreadsheet contains a list of patches needed to be
in compliance for HR Statutory reporting i.e. EEO-1, VETS-100 etc.
The spreadsheet is located on Metalink in Note number: 273196.1
H. Other Information
1. MetaLink - http://metalink.oracle.com <http://metalink.oracle.com/>
<http://metalink.oracle.com/>
MetaLink is a customer resource provided by Oracle World-wide Support.
The Applications section of Metalink contains all the latest product
documentation and documentation updates for Oracle’s products.
2. Payroll World
Payroll World is an email distribution list for North American Oracle
Payroll customers used to quickly disseminate information regarding
product updates, patches, and statutory changes. To be added to this
email distribution list, send e-mail to: [email protected]
<mailto:[email protected]>
Subject: Oracle North American Payroll World Contact Update with your
contact name, CSI number, and company name
3. Metalink Service Request profiles:
Please update all Service Request profiles on Metalink with any updates
to Database Version, Product Version, and/or contact information
Metalink->UserProfile button
4. Information for NEW North American Payroll customers:
A pamphlet is available for all North American Payroll customers
explaining Vertex, Payroll World, SIG's, etc.
The North American Payroll Handout document can be located in Metalink
Note 316077.1Chris,
If you are referring to (Patch 7395025 - Q3 2008 JIT SQWL UPDATE FOR R11I), then you can apply it on 11.5.9. Just make sure you have all pre-req. patches applied.
Note: 737173.1 - 2008 US Payroll Year End Phase 1 Readme Rel 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=737173.1 -
Two phase commit and bean managed transactions
To all the Transaction GURUS!
Hi guys (-and gals).
I've been doing J2EE for quite a while, but today was my first at
XA-Transactions and Bean Managed Transactions.
Why am I doing this?
====================
Well I have to be able to controll the transactionalbehaviour of my
bean
during runtime, since some bean calls would cause a transactional
overflow due to the stress they would cause to the system, whereas
smaller bean calls need to run in one transaction.
-> Therefore I need Bean Managed Transactions
Since the bean does a call on two Database Connections it has to use a
XA-Transaction.
-> Therefore I need XA-Transactions.
Abstract
========
- I just can't get a User TransAction into the right Status it stays
in 'STATUS_NO_TRANSACTION' all the time
- Therefore the SQL Commands can be comitted 'java.sql.SQLException:
Does not support SQL execution with no global transaction'
- Therefore I can't do a rollback 'java.lang.IllegalStateException:
Transaction does not exist'
- Therefore I wrote this mail.
I don't want to be a smart-"ass" writing such a detailed and indepth
mail. I just would like to show that I tried, and would like to have
some replies from you guys.
Below are my configurations, code and logfiles.
Thanx for taking your time and hope that the other people may learn
something as well.
cu
Stefan
Scenario
========
used Software
Bea Weblogic (WL) 6.0 SPx (not real sure which SP i have)
Oracle 8.1.6 using the API-Version 8
I configured the system as follows:
(ofcourse I 'xxx'ed out all of the confidential data, sorry guys;-))
excerpt from:
config.xml
<JDBCConnectionPool CapacityIncrement="5"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="2"
LoginDelaySeconds="1" MaxCapacity="5" Name="oraclePool"
Properties="user=xxx;password=xxx;dll=ocijdbc8;protocol=thin"
RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
TestTableName="languages" URL="jdbc:oracle:thin:@xxx:1521:xxx "/>
<!-- Since this is our Main Datasource I would not like to use a XA
Transaction due to performance Issues
and the TxDataSource:
-->
<JDBCTxDataSource EnableTwoPhaseCommit="true"
JNDIName="finstral.datasource.fbs" Name="finstral Content Datasource"
PoolName="oraclePool" Targets="fbsserver"/>
<!-- no comment required -I hope.
Next comes the "special" Pool
-->
<JDBCConnectionPool CapacityIncrement="5"
DriverName="weblogic.jdbc.oci.xa.XADataSource" InitialCapacity="1"
LoginDelaySeconds="1" MaxCapacity="2" Name="oracleSecurityPool"
Properties="user=xxx;password=xxx;server=xxx.xxx.xxx"
RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
TestTableName="Users" SupportsLocalTransaction="true"/>
<!-- Well since there can only be one none XARessourceManager involved
in a 2PC
(keyword: Two Phase Commit) I will have to use a XACapable Driver for
the other
Datasource. Due to all the bugs in the oracle.xxx driver. I'll be
using the jdriver for oci.
I activated 'SupportsLocalTransaction' hoping it would solve my
problem - without effect. I just left in there now, since it made
sense me. Not?
Again the TxDataSource:
-->
<JDBCTxDataSource EnableTwoPhaseCommit="true"
JNDIName="finstral.datasource.fbssecurity" Name="finstral Security
Datasource" PoolName="oracleSecurityPool" Targets="fbsserver"/>
<!-- The System starts right up and can locate the test tables and
everything. So I think all of this stuff is working here -->
ejb-jar.xml
<ejb-jar>
<enterprise-beans>
<session>
<ejb-name>TPCTestBean</ejb-name>
<home>de.sitewaerts.futuna.common.test.tpcbean.TPCHome</home>
<remote>de.sitewaerts.futuna.common.test.tpcbean.TPC</remote>
<ejb-class>de.sitewaerts.futuna.common.test.tpcbean.TPCBean</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Bean</transaction-type>
</session>
</enterprise-beans>
<assembly-descriptor/>
</ejb-jar>
<!-- Originally I had the assembly-descriptor full of transaction
requirements. I thought since
the bean is handling all of the transaction stuff itself, it might get
confused by the 'container-transaction'
properties, and deleted them. Do I need them anyway?-->
weblogic-ejb-jar.xml
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>TPCTestBean</ejb-name>
<stateless-session-descriptor/>
<jndi-name>finstral/ejb/test_tpc</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
<!-- Nothing I have to explain here -->
BeanCode (from the implementingBeanClass:
'de.sitewaerts.futuna.common.test.tpcbean.TPCBean')
public void setupTables() throws RemoteException
UserTransaction tx = getTransaction();
//getTransaction calls: 'tx = sCtx.getUserTransaction()' and does
some errorhandling
log.info("Die Transaktion vor den Connections: "+tx.toString());
//Sorry bout the German. You should get the Message though.
log.info("Der Transaktionsstatus vor den Connections:
"+transactionStatus(tx));
Connection conSecurity = getConnection(DATASOURCE_SECURITY, tx);
//gets a Connection via a DataSourceName from the JNDI tree
Connection conContent = getConnection(DATASOURCE_CONTENT, tx);
log.info("Die frische Connection conSecurity: "+conSecurity);
log.info("Die frische Connection conContent: "+conContent);
tearDownTable(conSecurity);
//Does nothing special
tearDownTable(conContent);
log.info("Die Transaktion nach dem Teardown: "+tx.toString());
log.info("Der Transaktionsstatus nach dem Teardown:
"+transactionStatus(tx));
Statement stmt = null;
try
stmt = conSecurity.createStatement();
//Well its getting interesting now.....
log.info("Die Transaktion vor dem createtable: "+tx.toString());
log.info("Der Transaktionsstatus vor dem createtable:
"+transactionStatus(tx));
log.info("Die Connection conSecurity vor dem createtable:
"+conSecurity);
log.info("Die Connection conContent vor dem createtable:
"+conContent);
stmt.executeUpdate(CREATE_TABLE);
//above is the row 91 -> throws: 'java.sql.SQLException: Does
not support SQL execution with no global transaction'
stmt.close();
stmt = conContent.createStatement();
stmt.executeUpdate(CREATE_TABLE);
stmt.close();
commitTransaction(tx);
catch (SQLException sqle)
log.error("Konnte kein table init machen", sqle);
rollbackTransaction(tx);
//The Code for this method is below
throw new EJBException(sqle);
finally
closeConnection(conSecurity);
closeConnection(conContent);
protected void rollbackTransaction(UserTransaction tx)
log.info("Der Transaktionsstatus vor dem Rollback:
"+transactionStatus(tx));
log.info("Die Transaktion vor dem Rollback: "+tx.toString());
try
tx.rollback();
//above is row 200 -> throws: 'java.lang.IllegalStateException:
Transaction does not exist'
log.info("Der Transaktionsstatus nach dem Rollback:
"+transactionStatus(tx));
log.info("Die Transaktion nach dem Rollback: "+tx.toString());
catch (Exception e)
log.error("Konnte die Transaktion nicht backrollen.", e);
throw new EJBException(e);
Log Excerpt
===========
INFO setupTables() (66) - Die Transaktion vor den Connections:
[email protected]
INFO setupTables() (67) - Der Transaktionsstatus vor den Connections:
STATUS_NO_TRANSACTION
INFO setupTables() (72) - Die frische Connection conSecurity:
weblogic.jdbc.rmi.SerialConnection@7c6daa
INFO setupTables() (73) - Die frische Connection conContent:
weblogic.jdbc.rmi.SerialConnection@3b425
INFO setupTables() (78) - Die Transaktion nach dem Teardown:
[email protected]
INFO setupTables() (79) - Der Transaktionsstatus nach dem Teardown:
STATUS_NO_TRANSACTION
INFO setupTables() (86) - Die Transaktion vor dem createtable:
[email protected]
INFO setupTables() (87) - Der Transaktionsstatus vor dem createtable:
STATUS_NO_TRANSACTION
INFO setupTables() (88) - Die Connection conSecurity vor dem
createtable: weblogic.jdbc.rmi.SerialConnection@7c6daa
INFO setupTables() (89) - Die Connection conContent vor dem
createtable: weblogic.jdbc.rmi.SerialConnection@3b425
ERROR setupTables() (101) - Konnte kein table init machen
java.sql.SQLException: Does not support SQL execution with no global
transaction
at
weblogic.jdbc.oci.xa.XAConnection.beforeExecute(XAConnection.java:137)
at
weblogic.jdbc.oci.xa.Statement.executeUpdate(Statement.java:112)
at weblogic.jdbc.jta.Statement.executeUpdate(Statement.java:185)
at
weblogic.jdbc.rmi.internal.StatementImpl.executeUpdate(StatementImpl.jav
a:42)
at
weblogic.jdbc.rmi.SerialStatement.executeUpdate(SerialStatement.java:54)
at
de.sitewaerts.futuna.common.test.tpcbean.TPCBean.setupTables(TPCBean.jav
a:91)
at
de.sitewaerts.futuna.common.test.tpcbean.TPCBeanImpl.setupTables(TPCBean
Impl.java:130)
at
de.sitewaerts.futuna.common.test.tpcbean.TPCBeanEOImpl.setupTables(TPCBe
anEOImpl.java:64)
at
de.sitewaerts.futuna.common.test.TwoPhaseCommitUnitTest.setUp(TwoPhaseCo
mmitUnitTest.java:51)
at
org.apache.commons.cactus.AbstractTestCase.runBareServerTest(AbstractTes
tCase.java:297)
at
org.apache.commons.cactus.server.ServletTestCaller.callTestMethod(Servle
tTestCaller.java:148)
at
org.apache.commons.cactus.server.ServletTestCaller.doTest(ServletTestCal
ler.java:199)
at
org.apache.commons.cactus.server.ServletTestRedirector.doPost(ServletTes
tRedirector.java:149)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java:213)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServl
etContext.java:1265)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.
java:1631)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
INFO rollbackTransaction() (196) - Der Transaktionsstatus vor dem
Rollback: STATUS_NO_TRANSACTION
INFO rollbackTransaction() (197) - Die Transaktion vor dem Rollback:
[email protected]
ERROR rollbackTransaction() (206) - Konnte die Transaktion nicht
backrollen.
java.lang.IllegalStateException: Transaction does not exist
at
weblogic.transaction.internal.TransactionManagerImpl.rollback(Transactio
nManagerImpl.java:228)
at
weblogic.transaction.internal.TransactionManagerImpl.rollback(Transactio
nManagerImpl.java:222)
at
de.sitewaerts.futuna.common.test.tpcbean.TPCBean.rollbackTransaction(TPC
Bean.java:200)
at
de.sitewaerts.futuna.common.test.tpcbean.TPCBean.setupTables(TPCBean.jav
a:102)
at
de.sitewaerts.futuna.common.test.tpcbean.TPCBeanImpl.setupTables(TPCBean
Impl.java:130)
at
de.sitewaerts.futuna.common.test.tpcbean.TPCBeanEOImpl.setupTables(TPCBe
anEOImpl.java:64)
at
de.sitewaerts.futuna.common.test.TwoPhaseCommitUnitTest.setUp(TwoPhaseCo
mmitUnitTest.java:51)
at
org.apache.commons.cactus.AbstractTestCase.runBareServerTest(AbstractTes
tCase.java:297)
at
org.apache.commons.cactus.server.ServletTestCaller.callTestMethod(Servle
tTestCaller.java:148)
at
org.apache.commons.cactus.server.ServletTestCaller.doTest(ServletTestCal
ler.java:199)
at
org.apache.commons.cactus.server.ServletTestRedirector.doPost(ServletTes
tRedirector.java:149)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java:213)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServl
etContext.java:1265)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.
java:1631)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
CONCLUSION
==========
I'm going nuts.
I just don't get it.
The transaction is the same. I don't change the Connection. I start
the Transaction at the beginning before I do anything!
Please guys help me out.
Thx alot.
Stefan "it's three o'clock in the morning, my girlfriend left me, and
my only friend is that stupid linux pinguine" Siprell
Software-Development
<<<<<<<<<<<<<<<<<<<<<<<<<<<
<sitewaerts> GmbH
Hebelstraße 15
D-76131 Karlsruhe
Tel: +49 (721) 920 918 22
Fax: +49 (721) 920 918 29
http://www.sitewaerts.de
>>>>>>>>>>>>>>>>>>>>>>>>>>>
Hi Priscilla
(did you ever see the movie ? :-))
Well I moved away from the idea of using bean managed transaction. I'll
be using Container Managed Transactions. To modify the
transactionalbehaviour I'll write proxymethods which have certain
different containermanaged transaction properties, but which all call
the same private methods.
But it works! Here is my experience:
- I was doing a DDL statement: I was trying to create new Tables, which
is a definite "no-go"
- pay careful attention to:
http://edocs.bea.com/wls/docs60/jta/trxejb.html#1051405
and
http://edocs.bea.com/wls/docs60/jta/trxejb.html#1051741
and use these Settings for the Pool, don't ask me why, but it took me
hours to find it out by myself:
<JDBCConnectionPool CapacityIncrement="5"
DriverName="weblogic.jdbc.oci.xa.XADataSource" InitialCapacity="1"
LoginDelaySeconds="1" MaxCapacity="2" Name="oracleSecurityPool"
Properties="user=xxx; password=xxx; server=xxx.xxx.xxx"
RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
TestTableName="Users" SupportsLocalTransaction="true"/>
where as the server (shown as: xxx.xxx.xxx) is the TNS Name of the
Oracle Driver.
It works great.
Another thing you guys might want to do is write a simple StatelessSB
which does JDBC calls and two different database Connections.
Then write a UnitTest which calls this bean a couple hundred times (with
the same transaction). Have one test do clean writes, and another which
causes some SQL-Exception (too long Data Columns, or likewise).
Always count the entries and see if everything worked out. We're using
this SetupConstruction to test new combinations of AS(sorry Priscilla) /
Database / Db-Drivers to have a "standard test".
I know my two cents were uncalled for, but it might save you some
time.....
thanx for your help
Stefan
-----Ursprüngliche Nachricht-----
Von: Priscilla Fung [mailto:[email protected]]
Bereitgestellt: Donnerstag, 2. August 2001 21:42
Bereitgestellt in: transaction
Unterhaltung: Two phase commit and bean managed transactions
Betreff: Re: Two phase commit and bean managed transactions
Hi Stefan,
Looks like you have not actually begun a transaction by calling
UserTransaction.begin(),
so your setupTables method is really executing with no transaction
context.
Priscilla
Stefan Siprell <[email protected]> wrote:
>To all the Transaction GURUS!
>
>Hi guys (-and gals).
>I've been doing J2EE for quite a while, but today was my first at
>XA-Transactions and Bean Managed Transactions.
>
>Why am I doing this?
>====================
>Well I have to be able to controll the transactionalbehaviour of my
>bean
>during runtime, since some bean calls would cause a transactional
>overflow due to the stress they would cause to the system, whereas
>smaller bean calls need to run in one transaction.
>-> Therefore I need Bean Managed Transactions
>Since the bean does a call on two Database Connections it has to use
>a
>XA-Transaction.
>-> Therefore I need XA-Transactions.
>
>Abstract
>========
>- I just can't get a User TransAction into the right Status it stays
>in 'STATUS_NO_TRANSACTION' all the time
>- Therefore the SQL Commands can be comitted 'java.sql.SQLException:
>Does not support SQL execution with no global transaction'
>- Therefore I can't do a rollback 'java.lang.IllegalStateException:
>Transaction does not exist'
>- Therefore I wrote this mail.
>
>I don't want to be a smart-"ass" writing such a detailed and indepth
>mail. I just would like to show that I tried, and would like to have
>some replies from you guys.
>
>Below are my configurations, code and logfiles.
>
>Thanx for taking your time and hope that the other people may learn
>something as well.
>
>cu
>
>Stefan
>
>
>Scenario
>========
>
>used Software
>-------------
>Bea Weblogic (WL) 6.0 SPx (not real sure which SP i have)
>Oracle 8.1.6 using the API-Version 8
>
>
>I configured the system as follows:
>(ofcourse I 'xxx'ed out all of the confidential data, sorry guys;-))
>excerpt from:
>
>config.xml
>----------
><JDBCConnectionPool CapacityIncrement="5"
>DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="2"
>LoginDelaySeconds="1" MaxCapacity="5" Name="oraclePool"
>Properties="user=xxx;password=xxx;dll=ocijdbc8;protocol=thin"
>RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
>TestTableName="languages" URL="jdbc:oracle:thin:@xxx:1521:xxx "/>
>
><!-- Since this is our Main Datasource I would not like to use a XA
>Transaction due to performance Issues
>and the TxDataSource:
>-->
>
><JDBCTxDataSource EnableTwoPhaseCommit="true"
>JNDIName="finstral.datasource.fbs" Name="finstral Content Datasource"
>PoolName="oraclePool" Targets="fbsserver"/>
>
><!-- no comment required -I hope.
>Next comes the "special" Pool
>-->
>
><JDBCConnectionPool CapacityIncrement="5"
>DriverName="weblogic.jdbc.oci.xa.XADataSource" InitialCapacity="1"
>LoginDelaySeconds="1" MaxCapacity="2" Name="oracleSecurityPool"
>Properties="user=xxx;password=xxx;server=xxx.xxx.xxx"
>RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
>TestTableName="Users" SupportsLocalTransaction="true"/>
>
><!-- Well since there can only be one none XARessourceManager involved
>in a 2PC
>(keyword: Two Phase Commit) I will have to use a XACapable Driver for
>the other
>Datasource. Due to all the bugs in the oracle.xxx driver. I'll be
>using the jdriver for oci.
>I activated 'SupportsLocalTransaction' hoping it would solve my
>problem - without effect. I just left in there now, since it made
>sense me. Not?
>Again the TxDataSource:
>-->
>
><JDBCTxDataSource EnableTwoPhaseCommit="true"
>JNDIName="finstral.datasource.fbssecurity" Name="finstral Security
>Datasource" PoolName="oracleSecurityPool" Targets="fbsserver"/>
>
><!-- The System starts right up and can locate the test tables and
>everything. So I think all of this stuff is working here -->
>
>
>
>ejb-jar.xml
>-----------
><ejb-jar>
> <enterprise-beans>
> <session>
> <ejb-name>TPCTestBean</ejb-name>
>
><home>de.sitewaerts.futuna.common.test.tpcbean.TPCHome</home>
>
><remote>de.sitewaerts.futuna.common.test.tpcbean.TPC</remote>
>
><ejb-class>de.sitewaerts.futuna.common.test.tpcbean.TPCBean</ejb-class>
> <session-type>Stateless</session-type>
> <transaction-type>Bean</transaction-type>
> </session>
> </enterprise-beans>
> <assembly-descriptor/>
></ejb-jar>
>
><!-- Originally I had the assembly-descriptor full of transaction
>requirements. I thought since
>the bean is handling all of the transaction stuff itself, it might get
>confused by the 'container-transaction'
>properties, and deleted them. Do I need them anyway?-->
>
>weblogic-ejb-jar.xml
>--------------------
><weblogic-ejb-jar>
> <weblogic-enterprise-bean>
> <ejb-name>TPCTestBean</ejb-name>
> <stateless-session-descriptor/>
> <jndi-name>finstral/ejb/test_tpc</jndi-name>
> </weblogic-enterprise-bean>
></weblogic-ejb-jar>
>
><!-- Nothing I have to explain here -->
>
>BeanCode (from the implementingBeanClass:
>'de.sitewaerts.futuna.common.test.tpcbean.TPCBean')
>-----------------------------------------------------------------------
>---------------------
>
> public void setupTables() throws RemoteException
> {
> UserTransaction tx = getTransaction();
> //getTransaction calls: 'tx = sCtx.getUserTransaction()' and does
>some errorhandling
>
> log.info("Die Transaktion vor den Connections: "+tx.toString());
> //Sorry bout the German. You should get the Message though.
> log.info("Der Transaktionsstatus vor den Connections:
>"+transactionStatus(tx));
>
> Connection conSecurity = getConnection(DATASOURCE_SECURITY, tx);
> //gets a Connection via a DataSourceName from the JNDI tree
> Connection conContent = getConnection(DATASOURCE_CONTENT, tx);
>
> log.info("Die frische Connection conSecurity: "+conSecurity);
> log.info("Die frische Connection conContent: "+conContent);
>
> tearDownTable(conSecurity);
> //Does nothing special
> tearDownTable(conContent);
>
> log.info("Die Transaktion nach dem Teardown: "+tx.toString());
> log.info("Der Transaktionsstatus nach dem Teardown:
>"+transactionStatus(tx));
>
> Statement stmt = null;
> try
> {
> stmt = conSecurity.createStatement();
> //Well its getting interesting now.....
>
> log.info("Die Transaktion vor dem createtable: "+tx.toString());
> log.info("Der Transaktionsstatus vor dem createtable:
>"+transactionStatus(tx));
> log.info("Die Connection conSecurity vor dem createtable:
>"+conSecurity);
> log.info("Die Connection conContent vor dem createtable:
>"+conContent);
>
> stmt.executeUpdate(CREATE_TABLE);
> //above is the row 91 -> throws: 'java.sql.SQLException: Does
>not support SQL execution with no global transaction'
>
> stmt.close();
>
> stmt = conContent.createStatement();
> stmt.executeUpdate(CREATE_TABLE);
> stmt.close();
> commitTransaction(tx);
> }
> catch (SQLException sqle)
> {
> log.error("Konnte kein table init machen", sqle);
> rollbackTransaction(tx);
> //The Code for this method is below
> throw new EJBException(sqle);
> }
> finally
> {
> closeConnection(conSecurity);
> closeConnection(conContent);
> }
> }
>
> protected void rollbackTransaction(UserTransaction tx)
> {
> log.info("Der Transaktionsstatus vor dem Rollback:
>"+transactionStatus(tx));
> log.info("Die Transaktion vor dem Rollback: "+tx.toString());
> try
> {
> tx.rollback();
> //above is row 200 -> throws: 'java.lang.IllegalStateException:
>Transaction does not exist'
> log.info("Der Transaktionsstatus nach dem Rollback:
>"+transactionStatus(tx));
> log.info("Die Transaktion nach dem Rollback: "+tx.toString());
> }
> catch (Exception e)
> {
> log.error("Konnte die Transaktion nicht backrollen.", e);
> throw new EJBException(e);
> }
> }
>
>Log Excerpt
>===========
>INFO setupTables() (66) - Die Transaktion vor den Connections:
>[email protected]
>INFO setupTables() (67) - Der Transaktionsstatus vor den Connections:
>STATUS_NO_TRANSACTION
>INFO setupTables() (72) - Die frische Connection conSecurity:
>weblogic.jdbc.rmi.SerialConnection@7c6daa
>INFO setupTables() (73) - Die frische Connection conContent:
>weblogic.jdbc.rmi.SerialConnection@3b425
>INFO setupTables() (78) - Die Transaktion nach dem Teardown:
>[email protected]
>INFO setupTables() (79) - Der Transaktionsstatus nach dem Teardown:
>STATUS_NO_TRANSACTION
>INFO setupTables() (86) - Die Transaktion vor dem createtable:
>[email protected]
>INFO setupTables() (87) - Der Transaktionsstatus vor dem createtable:
>STATUS_NO_TRANSACTION
>INFO setupTables() (88) - Die Connection conSecurity vor dem
>createtable: weblogic.jdbc.rmi.SerialConnection@7c6daa
>INFO setupTables() (89) - Die Connection conContent vor dem
>createtable: weblogic.jdbc.rmi.SerialConnection@3b425
>ERROR setupTables() (101) - Konnte kein table init machen
>java.sql.SQLException: Does not support SQL execution with no global
>transaction
> at
>weblogic.jdbc.oci.xa.XAConnection.beforeExecute(XAConnection.java:137)
> at
>weblogic.jdbc.oci.xa.Statement.executeUpdate(Statement.java:112)
> at weblogic.jdbc.jta.Statement.executeUpdate(Statement.java:185)
> at
>weblogic.jdbc.rmi.internal.StatementImpl.executeUpdate(StatementImpl.ja
v
>a:42)
> at
>weblogic.jdbc.rmi.SerialStatement.executeUpdate(SerialStatement.java:54
> at
>de.sitewaerts.futuna.common.test.tpcbean.TPCBean.setupTables(TPCBean.ja
v
>a:91)
> at
>de.sitewaerts.futuna.common.test.tpcbean.TPCBeanImpl.setupTables(TPCBea
n
>Impl.java:130)
> at
>de.sitewaerts.futuna.common.test.tpcbean.TPCBeanEOImpl.setupTables(TPCB
e
>anEOImpl.java:64)
> at
>de.sitewaerts.futuna.common.test.TwoPhaseCommitUnitTest.setUp(TwoPhaseC
o
>mmitUnitTest.java:51)
> at
>org.apache.commons.cactus.AbstractTestCase.runBareServerTest(AbstractTe
s
>tCase.java:297)
> at
>org.apache.commons.cactus.server.ServletTestCaller.callTestMethod(Servl
e
>tTestCaller.java:148)
> at
>org.apache.commons.cactus.server.ServletTestCaller.doTest(ServletTestCa
l
>ler.java:199)
> at
>org.apache.commons.cactus.server.ServletTestRedirector.doPost(ServletTe
s
>tRedirector.java:149)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
> at
>weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl
>java:213)
> at
>weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServ
l
>etContext.java:1265)
> at
>weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl
>java:1631)
> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>INFO rollbackTransaction() (196) - Der Transaktionsstatus vor dem
>Rollback: STATUS_NO_TRANSACTION
>INFO rollbackTransaction() (197) - Die Transaktion vor dem Rollback:
>[email protected]
>ERROR rollbackTransaction() (206) - Konnte die Transaktion nicht
>backrollen.
>java.lang.IllegalStateException: Transaction does not exist
> at
>weblogic.transaction.internal.TransactionManagerImpl.rollback(Transacti
o
>nManagerImpl.java:228)
> at
>weblogic.transaction.internal.TransactionManagerImpl.rollback(Transacti
o
>nManagerImpl.java:222)
> at
>de.sitewaerts.futuna.common.test.tpcbean.TPCBean.rollbackTransaction(TP
C
>Bean.java:200)
> at
>de.sitewaerts.futuna.common.test.tpcbean.TPCBean.setupTables(TPCBean.ja
v
>a:102)
> at
>de.sitewaerts.futuna.common.test.tpcbean.TPCBeanImpl.setupTables(TPCBea
n
>Impl.java:130)
> at
>de.sitewaerts.futuna.common.test.tpcbean.TPCBeanEOImpl.setupTables(TPCB
e
>anEOImpl.java:64)
> at
>de.sitewaerts.futuna.common.test.TwoPhaseCommitUnitTest.setUp(TwoPhaseC
o
>mmitUnitTest.java:51)
> at
>org.apache.commons.cactus.AbstractTestCase.runBareServerTest(AbstractTe
s
>tCase.java:297)
> at
>org.apache.commons.cactus.server.ServletTestCaller.callTestMethod(Servl
e
>tTestCaller.java:148)
> at
>org.apache.commons.cactus.server.ServletTestCaller.doTest(ServletTestCa
l
>ler.java:199)
> at
>org.apache.commons.cactus.server.ServletTestRedirector.doPost(ServletTe
s
>tRedirector.java:149)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
> at
>weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl
>java:213)
> at
>weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServ
l
>etContext.java:1265)
> at
>weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl
>java:1631)
> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
>
>CONCLUSION
>==========
>I'm going nuts.
>I just don't get it.
>The transaction is the same. I don't change the Connection. I start
>the Transaction at the beginning before I do anything!
>Please guys help me out.
>Thx alot.
>
>Stefan "it's three o'clock in the morning, my girlfriend left me, and
>my only friend is that stupid linux pinguine" Siprell
>Software-Development
><<<<<<<<<<<<<<<<<<<<<<<<<<<
><sitewaerts> GmbH
>Hebelstraße 15
>D-76131 Karlsruhe
>
>Tel: +49 (721) 920 918 22
>Fax: +49 (721) 920 918 29
>http://www.sitewaerts.de
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>
>
>
-
Setting up new printer with MacBook Pro AND Dell?
Need a printer, want an AIO, any work better than others with MacBook and Dell? Purchased a HP Officejet 6500A Plus, any problems using both systems togehter? Also, should I set up the Dell first then the Mac, or viceversa?
Thanks for the help, I'm definitely getting there
I changed the settings as you've described and can now print from my MBP. The 3 Dell laptops are another matter. Would you have any idea what the IP address of the printer would be? Or the AirPort Extreme? I'm following this tutorial:
http://www.ifelix.co.uk/tech/1004.html
without much success but I'm really guessing at the IP address. I've tried 192.168.1.1 (my router) and 192.168.1.101 (the IPv4 address) with no luck. I suspect it's the IP address that's the problem ...
Any thoughts?
Thanks
Jay -
Netflix movie resolution phases in and out of high and low.
When I'm watching a netflix movie even with WiFi the resolution phases in and out of high and low resolution. Does anyone know what is causing this?
Yes, you download speed is changing. If the download speed is not great enough for HD it reverts to SD.
-
Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software
Please read the information at...
Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software
Locate the execute file (WebcamDell2.exe) buried in...
C:\Program Files (x86)\Dell Webcam\Dell Webcam Central
Right clicked on it, then left click properties, then clicked on the compatibility tab, then changed compatibility from windows XP to Windows Vista SP 2 (the latest one they had).
If your operating system was upgraded to Windows 7, did you install the drivers in the correct order? How to Download and Install Drivers in the Correct Order
Shutdown the computer. Unplug the computer from the wall. Now remove the battery. Press and hold the power button for 30 seconds. Put the
battery back in and start the computer. Did the webcam come back?
If no, start, control panel, devices and printers. Click on add device. Is the webcam listed there?
If you recently reinstalled the operating system, did you use the preferred method? Restoring Your Computer´s Software to the Factory Settings or Restoring Your Dell Computer to Original Factory Installation with Dell DataSafe Local Backup 2.0
Please use Internet Explorer(32-bit) when navigating to My Dell Downloads :: Login. Use the same email address and password you use here. Click on add system.
***Systems purchased befor April 1, 2010 might NOT register with Dell My Downloads***
If system does NOT register after 5 minutes, then contact Dell Tech Support.
If you have XP or a system that will not register, then try using this version of Dell Webcam Central. Once it's installed, then open it, click on the ? , check for software update
Open Dell Webcam Central. In the bottom right corner, make sure the webcam is on Capture mode.
RickHello Rick,
Thanks for trying to help.
Here is the info as requested:-
Host Name: DELLLAPTOP
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Trevor
Registered Organization: Microsoft
Product ID: ?????
Original Install Date: 07/07/2010, 11:46:05
System Boot Time: 24/10/2011, 12:06:27
System Manufacturer: Dell Inc.
System Model: Inspiron 1570
System Type: x64-based PC
Processor(s): 1 Processor(s) Installed.
[01]: Intel64 Family 6 Model 23 Stepping 10 GenuineIntel ~793 Mhz
BIOS Version: Dell Inc. A05, 23/03/2011
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume2
System Locale: en-gb;English (United Kingdom)
Input Locale: en-gb;English (United Kingdom)
Time Zone: (UTC) Dublin, Edinburgh, Lisbon, London
Total Physical Memory: 2,937 MB
Available Physical Memory: 1,399 MB
Virtual Memory: Max Size: 5,872 MB
Virtual Memory: Available: 4,244 MB
Virtual Memory: In Use: 1,628 MB
Page File Location(s): C:\pagefile.sys
Domain: WORKGROUP
Logon Server: \\DELLLAPTOP
Hotfix(s): 71 Hotfix(s) Installed.
[01]: 982861
[02]: KB971033
[03]: KB2305420
[04]: KB2393802
[05]: KB2425227
[06]: KB2475792
[07]: KB2476490
[08]: KB2478662
[09]: KB2479628
[10]: KB2479943
[11]: KB2484033
[12]: KB2485376
[13]: KB2487426
[14]: KB2488113
[15]: KB2491683
[16]: KB2492386
[17]: KB2503658
[18]: KB2503665
[19]: KB2505438
[20]: KB2506014
[21]: KB2506212
[22]: KB2506223
[23]: KB2506928
[24]: KB2507618
[25]: KB2507938
[26]: KB2508272
[27]: KB2508429
[28]: KB2509553
[29]: KB2511250
[30]: KB2511455
[31]: KB2515325
[32]: KB2518869
[33]: KB2522422
[34]: KB2524375
[35]: KB2525694
[36]: KB2529073
[37]: KB2530548
[38]: KB2532531
[39]: KB2533552
[40]: KB2533623
[41]: KB2534366
[42]: KB2536275
[43]: KB2536276
[44]: KB2539635
[45]: KB2541014
[46]: KB2544893
[47]: KB2545698
[48]: KB2547666
[49]: KB2552343
[50]: KB2555917
[51]: KB2556532
[52]: KB2559049
[53]: KB2560656
[54]: KB2562937
[55]: KB2563227
[56]: KB2563894
[57]: KB2564958
[58]: KB2567053
[59]: KB2567680
[60]: KB2570791
[61]: KB2570947
[62]: KB2572077
[63]: KB2579686
[64]: KB2586448
[65]: KB2607712
[66]: KB2616676
[67]: KB958488
[68]: KB976002
[69]: KB976902
[70]: KB976932
[71]: KB982018
Network Card(s): 4 NIC(s) Installed.
[01]: Realtek PCIe GBE Family Controller
Connection Name: Local Area Connection
Status: Media disconnected
[02]: Intel(R) WiFi Link 5100 AGN
Connection Name: Wireless Network Connection
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
IP address(es)
[01]: ????
[02]: ????
[03]: Microsoft Virtual WiFi Miniport Adapter
Connection Name: Wireless Network Connection 2
Status: Media disconnected
[04]: Cisco Systems VPN Adapter for 64-bit Windows
Connection Name: Local Area Connection 2
Status: Hardware not present
Hope that this will help.
Thanks again
Regards
Trevor -
Looking for a good black and white laser printer
I am sorry if I am at a wrong place, but I would like to get some recommend for a good black and white laser printer. Maybe some of the user in this group have some good experience
Thanks in advance - FrankThe Brother HL-5340D is an excellent choice. It's much cheaper to operate in the long run than others. I did a cost breakdown between it and an HP printer here.
However the HL-5340D is discontinued. We paid $170 for ours new, and new ones that remain are at a price gouging $530. The current nearest model is the updated HL-5450DN for $185. -
The Best HP Black and White Laser Printer with e-print
Please could someone let me know the best HP Laser printer (Black cartridge only) to use in an office environment that has the e-print facility. It will be used frequently and will be printing multiple page PDF attachments from e-mails. Anyones guidance as to which e-print machine to buy will be most appreciated. Many thanks Simon
The only Black and White Laser Printer that supports e-print is the HP LaserJet Pro M1536 Series Multifunction Printer. Here is a link to the support site: http://h10025.www1.hp.com/ewfrf/wc/product?product=3974279&lc=en&cc=us&dlc=en&lang=en&cc=us
Other color LaserJet products that support e-print are the HP LaserJet Pro CM1415 Series and the CP1525 Series.
Although I am an HP employee, I am speaking for myself and not for HP. -
Can I use Dell R900 as primary and Dell PE6850 Server
I want to configure Rac on Oracle 10g, as i also want to configured oracle dataguard.
My question is "Can i use Dell R900 as Primary database and Dell PE6850"http://youngcow.net/doc/oracle10g/server.102/b14239/standby.htm#sthref233
Maybe you are looking for
-
Arabic problem in photoshop CS6
Dear all, I have problem for Arabic language supporting in photoshop CS6. Every time I am trying to type Arabic language I failed to do so. I need to type the language outside the photoshop and then copy and paste it there. Is there way to get anothe
-
How to include some costs in standart price on the base of material costs?
Hi, the current client want to include some costs in standart price for the material on the base of raw material costs (according to bill of material). "Some costs" are costs for whole plant or workshop: electricity, gas, salary of some wokers an so
-
My ipod nano 4th gen was submerged in water.
My ipod nano 4th gen was submerged in water. After it dried inside, i tried to turn it on but doesnt work, showing the blank screen. I plugged it in, held the menu button and it made 2 beeps then stopped.I could still connect it to the computer and a
-
ASCP Table name for Recipe 'Preference' field
I have separate Planning and Production recipes for the same item. ASCP is required to plan using planning recipes - and batches would be created manually refererring ASCP output using production recipes (there is business reason for this). All plann
-
Error 1060 Event server, integration services.
Hola, Actualmente tenemos un problema al momento de instalar SAP 2007. Cuando se terminado de instalar totalmente el Server tools, Server y client. El server tools tiene dos herramientas nuevas que se llaman: Event Sender Services Integration Service