PHC & Intel Pentium M Centrino & kernel 3.x

Hi to all, I have a simple question: does phc undervolting work with Pentium M and kernel 3.x?
I heard rumors on phc forum that it doesn't work  http://linux-phc.org/forum/viewtopic.php?f=8&t=321  and infact I cant get it to work on my system, I get the classical error cat: /sys/devices/system/cpu/cpu0/cpufreq/phc_vids: No such device
more details here: http://linux-phc.org/forum/viewtopic.php?f=8&t=4984
Please someone with a Pentium M notebook could test phc-intel? Thanks
Ps.I'll try to manually modify speedstep-centrino.c , the hardcoded method
http://www.gentoo-wiki.info/Pentium_M/Undervolting
Last edited by Xemertix (2013-04-22 18:57:54)

I'm pretty sure I've got it working on an old x41t, I think everything worked out of the box for me. I'll get back to you later when I charge it up and check.

Similar Messages

  • Can't use phc-intel with 3.9.3

    I installed the AUR package for phc-intel, changed the VIDS in /etc/phc-intel.conf and rebooted.
    Running /usr/bin/phc-intel start doesn't have any effect (status still shows as "Stopped")
    I'm running a custom Zen kernel, acpi-cpufreq is built as a module.
    cat /proc/cpuinfo
    processor : 0
    vendor_id : GenuineIntel
    cpu family : 6
    model : 15
    model name : Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
    stepping : 13
    microcode : 0xa3
    cpu MHz : 1994.975
    cache size : 2048 KB
    physical id : 0
    siblings : 2
    core id : 0
    cpu cores : 2
    apicid : 0
    initial apicid : 0
    fpu : yes
    fpu_exception : yes
    cpuid level : 10
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm tpr_shadow vnmi flexpriority
    bogomips : 3991.19
    clflush size : 64
    cache_alignment : 64
    address sizes : 36 bits physical, 48 bits virtual
    power management:
    processor : 1
    vendor_id : GenuineIntel
    cpu family : 6
    model : 15
    model name : Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
    stepping : 13
    microcode : 0xa3
    cpu MHz : 1994.975
    cache size : 2048 KB
    physical id : 0
    siblings : 2
    core id : 1
    cpu cores : 2
    apicid : 1
    initial apicid : 1
    fpu : yes
    fpu_exception : yes
    cpuid level : 10
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm tpr_shadow vnmi flexpriority
    bogomips : 3991.19
    clflush size : 64
    cache_alignment : 64
    address sizes : 36 bits physical, 48 bits virtual
    power management:
    lsmod
    Module Size Used by
    mperf 1272 0
    iwldvm 179033 0
    led_class 3515 1 iwldvm
    iwlwifi 86589 1 iwldvm
    /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver
    zsh: no such file or directory: /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver
    /sys/devices/system/cpu/cpu0/cpufreq/phc_version
    zsh: no such file or directory: /sys/devices/system/cpu/cpu0/cpufreq/phc_version
    modprobe phc-intel
    modprobe: ERROR: could not insert 'phc_intel': No such device
    modprobe acpi-cpufreq
    modprobe: ERROR: could not insert 'phc_intel': No such device
    modprobe: ERROR: could not insert 'acpi_cpufreq': No such device
    modprobe: ERROR: Error running install command for acpi_cpufreq
    modprobe: ERROR: could not insert 'acpi_cpufreq': Operation not permitted
    Anything I'm missing? Thanks!
    phc-intel setup done before the reboot
    [edit to update the kernel version. all error messages remain the same]
    Last edited by el mariachi (2013-05-23 10:27:42)

    yes

  • System upgrade fails with pacman - phc-intel requires kernel26 2.6.31

    Hello,
    I'm a relative newbie to archlinux, so I hope I'm not asking a too stupid question ...
    I have installed arch on an IBM Thinkpad X40. Was now on extended holidays and haven't done a system upgrade for a while. Wanted to do this now and pacman -Syy works fine. However, when I then start the upgrade with pacman -Su, the following error message occurs:
    :: Starte komplette Systemaktualisierung...
    :: portmap durch core/rpcbind ersetzen? [J/n] J
    Löse Abhängigkeiten auf...
    Suche nach Zwischen-Konflikten...
    Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
    :: phc-intel: benötigt kernel26<2.6.31
    translated into English it basically means that pacman wants to replace portmap with rpcbind. However, the following error message occurs whether or not I say yes. The error messages says that it cannot fulfill the dependencies as phc-intel requires kernel26<2.6.31. The strange thing is that my kernel at the moment is 2.6.29.
    A first run of pacman -u worked fine but only upgraded pacman itself. I had a pacman.conf.pacnew in /etc which I renamed to pacman.conf and kept the old one as a backup. However, this also didn't change anything.
    I hope you guys can help me out, thanks in advance,
    F.

    The update will be trying to install a new kernel, which is why you're getting the error. For packages in the repos, a new one would be built that's compatible with the new kernel. Since it looks like phc-intel is from the AUR you'll need to build a new version yourself.
    Edit - that's what I get for stepping away for a bit, you already got a response and fixed it
    Last edited by mcmillan (2009-12-05 19:14:24)

  • I can not install Oracle 8i 1.6 Client for NT on an Intel pentium 4 Machine

    Hi all,
    I've heard the java virtual m installed during the installation of oracle client manager 8i 1.6 on a Intel Pentium IV is bugy till now we could n't bring it to runn. Is there anyone who has the uptodate Patch or work around for that problem?
    I will be pleased to read any of the suggestions
    Thanks and regards.
    Gallican

    I think you would need to contact Oracle support to get the CD's if they're still available. 8.1.6 is desupported.
    What kind of errors do you get whne trying to use Crystal with Oracle 8.1.7.4? Perhaps this is an ODBC issue?

  • Flash player 10.3.181.14 requires intel pentium 4 2.33ghz,I have  intel CPU T2080@1.73ghz processor

    I am trying to use Adobe Flash player at home to simply surf the web. For a long time I've been getting prompts to update Flash Player and however much I updated it the prompts kept on poping up. This got so frustrating I decided i'd try to fix the problem once and for all. So I checked the system requirements Adobe recommend for the update I had been downloading and found one of the minimum requirements to be an intel pentium 4 2.33ghz processor. I checked my system and I have only an intel CPU [email protected] processor. My question is, does this explain why I am having so many problems? I've tried to download an earlier version of Flash Player but I always get redirected to the 10.3.181.14 version. How it has come to this I am not quite sure but I must admit I have removed the Flash Player from my computer at the moment and I'm worried that it was a mistake because will I ever get a working version again? I am running Windows Vista 32bit and Internet Explorer 8 32bit. I am out of my depth so please be gentle!

    You might have better luck if you post your question in the Flash Player forum...
    http://forums.adobe.com/community/webplayers/flash_player

  • I downloaded Firefox 5.0. Firefox will not open. States running offline. I have a Intel Pentium/Windows XP system.

    I downloaded Firefox 5.0. Firefox will not open. States running offline. I have a Intel Pentium/Windows XP system.
    This also happened when I tried to download Firefox 4.
    Firefox 3.6.18 works fine

    You may need to delete the Firefox program folder before (re)installing the latest Firefox.<br />
    In case you still have problems after installing then check your security software.
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *http://kb.mozillazine.org/Browser_will_not_start_up

  • Installing WLS on an Intel-pentium using Solaris

    Has anyone installed WLS on an intel-pentium pc running Solaris ? Although
    it appears that it is a supported combination, I did see a note that said
    "it was in the radar". Is there an official line on this ?

    It is not supported.
    The platform support page for WebLogic Server is located at:
    http://www.weblogic.com/platforms/index.html
    This page has the latest and greatest information on the platforms that
    WebLogic is certified and supported on.
    Thanks,
    Michael
    Michael Girdley
    BEA Systems
    Learning WebLogic? http://learnweblogic.com
    Buy the only book covering J2EE & WebLogic 6:
    http://www.amazon.com/exec/obidos/ASIN/0130911119/learnweblogic/102-1778325-
    4765749
    "Daniel Hoppe" <[email protected]> wrote in message
    news:[email protected]..
    Hi,
    Has anyone installed WLS on an intel-pentium pc running
    Solaris ? Although
    it appears that it is a supported combination, I did see a
    note that said
    "it was in the radar". Is there an official line on this ?
    Yepp, we tried that as a test setup. Works, but I think we did not have
    native IO running.
    Daniel

  • Will my mac mini 2009 support this cpu? Intel Pentium Processor G3258 4 BX80646G3258.

    I am upgrading my 2009 mac mini. I want to upgrade to this cpu to Intel Pentium Processor G3258 4 BX80646G3258. Dose anyone know if the motherboard will support it and the ram i have. I have 2 1 gb sticks of ram at 1067 Mhz DDR3.

    2cars10 wrote:
    also will there be room for the Intel cpu cooler?
    It won't be required, you can't change the CPU in your Mac Mini.

  • Can I play The Sims 3 on Intel Pentium

    have Intel Pentium Processor N3530 (2.16 GHz). My laptop is HP Pavilion 11 x360

    @Tish89
    Welcome to the HP Community Forum.
    There are lots of these in this category... 283 models
    Commentary
    I do not recognize "Sims 3"  -- I suspect "The Sims 3" is a game and you are asking because the game is one you must purchase.  It would indeed be nice to know if you can play before you pay.  No one likes to guess about these things.
    In general, yours is not a gaming system -- it is a little notebook, not made for playing games.
    If the game is a "little game", then -- maybe.
    If the game is going to be a large monetary investment -- say, more than you can toss out the window if you end up not being able to run it because the computer is not able to handle it, then the answer is
    "No, you cannot run the game."
    True / False statements cannot have any "if" bits.
    You might go to the game's Website and check out what other's say about this.  Check not just what kind of processor, also how much RAM (memory) is enough (for example, 4GB on a computer is not very much to have, you need MORE), whether you can run on just wireless.  See whether anyone else has tried to run Sims 3 on a smaller computer.
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Micorsoft Server Compatibility with Laptop system having Intel Pentium Quad-Core CPU N3530 (2.16 GHz)

    I would like to know if I can install Microsoft Server 2008 Enterprise or Standard Edition on a Laptop having Intel Pentium Quad-Core CPU N3530 (2.16 GHz). Currently it has Window 8. I do not need Windows 8 and would like to install Microsoft Server 2008
    Enterprise or Standard Edition.
    Will it work ?
    Thnx.

    Hi Zahid-I,
    We support the Windows server system install on the certified hardware you can search ask your hardware vendor for exactly supported system or you can search the Windows Server
    Catalog to found whether your hardware certified by server 2008, personal experience is most of the laptop not supported the server system.
    Windows Server Catalog
    http://www.windowsservercatalog.com/results.aspx?bCatId=1283&avc=10
    Personal experience is if our PC hardware meet the minimum require of server system we can install it for test lab.
    More information:
    Windows Server 2008 System Requirements
    http://technet.microsoft.com/en-us/windowsserver/bb414778.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • LabVIEW 8.0 をIntel Pentium D 820

    LabVIEW 8.0 をIntel Pentium D 820（Dual CoreのCPU）版PC（OSはWindows XP Professional x64 Edition)にインストールしようとするとインストール（ファイルのコピー中）に失敗していまいますが、何が原因で、何か対策があるでしょうか？

    平素より弊社製品を、ご使用いただきまして誠にありがとうございます。
    日本ナショナルインスツルメンツ技術部の荒瀬と申します。
    お問い合わせいただきました件につきまして、以下のようにお答えさせていただきます。
    Windows SP x64 EditionにLabVIEW 8.0インストールされる際に、コピー中に
    失敗してしまう現象で、ご迷惑をお掛けしております。申し訳ございません。
    回避策としまして、以下をお試しいただけますでしょうか。
    1.) スタート→ファイル名を指定して実行...を選択し、「gpedit.msc」と入力し、Enterを押してください。
    2.) グループポリシー エディタが表示されます。
    3.)
    左側のペーンから、ローカルコンピュータポリシー→コンピュータの構成→管理用テンプレート→Windowsコンポーネント→Windowsインストーラ を選択してください。
    4.) 右側のリストから、「セキュリティで保護されている場所に変換ファイルをキャッシュする」をダブルクリックしてください。
    5.) 「無効」に変更し、OKをクリックしてください。(添付いたしましたスクリーンショットをご参照ください)
    6.) グループポリシーエディタを閉じて、PCを再起動した後に再度LabVIEW 8.0のインストーラを立ち上げてください。
    以上、お手数ですがお試しいただけますでしょうか。
    ちなみにインストール後も上記設定のままにしていただいても、PCに影響を与えることはございませんのでご安心ください。
    よろしくお願い致します。
    日本NI技術部
    荒瀬

  • Can I run CC on Intel Pentium G2030 3.00GHz dual core. NVIDIA Geforce GT610 1GB graphics. Viglen Vig642M Motherboard?

    Can I run CC on Intel Pentium G2030 3.00GHz dual core. NVIDIA Geforce GT610 1GB graphics. Viglen Vig642M Motherboard?
    I also have 8GB RAM DDR3, 1TB HDD, Its on Windows 7, is that a problem with the allocated graphics card?
    P

    Thanks John,
    I've done this, but couldn't gather clear information about whether the graphics card was suitable for Premiere CC? Using CPUbenchmark it seemed to me like it would be suitable. Its unlikely we would use After Effects CC but would be handy if it would work.
    Also the G2030 dual core? Can you recommend how I find out if this would work, as the site states the requirement to be a Dual Core2... does this mean the software (Premiere CC, Photoshop CC, Indesign CC etc) would not work at all?
    Any guidance helpful.
    P

  • Creative Cloud Requirement: Does Intel Pentium Dual CPU E2200 @ 2.2GHZ 2.20GHZ work?

    Creative Cloud requirements ask for Intel® Pentium® 4 or AMD Athlon® 64 processor (2 GHz or faster). I have an Intel Pentium Dual CPU E2200 @ 2.2GHZ 2.20GHZ, which supposedly is better than a Pentium 4. Can I install the Creative Cloud apps on my computer as long as I have Windows 7 64 bit version?

    By the way, I called support since no-one was answering this. And they said "yes, the requirements are a minimum. If you have something better (in this case I do) it will be fine".

  • Pentium-M-optimized kernel

    Eee repository from toofishes
    toofishes created a repository for the Eee. You can find some basic packages like Pentium-M-optimized kernel and needed modules. Add
    [eee]
    Server = http://code.toofishes.net/packages/eee
    Saw this kernel option browsing thru the Eee PC part of wiki helping a friend.  I use a Pentium M laptop for day to day Arch use, would this kernel be worth a try or is it going to screw everything that I have worked so hard to build.
    I use dwm as my main WM.
    pink

    The eee kernel will install itself along side your standard arch kernel. You will still be able to use your standard kernel if you choose.
    Just add another entry in grub that will boot vmlinuzeee (the eee kernel), and leave your standard grub entry and kernel alone. That way you can test to see if kernel-eee is any good for your machine.
    My eeepc has both kernels installed and the eee kernel boots 7 seconds quicker than the standard one.
    Just hope all the modules for your machine are in the eee kernel or some of your hardware isn't going to work.
    But I can't see it would bork your install, at worst it's going to kernel panic. If it does restart and choose the standard kernel from grub ( That you kept ).
    I might go and install it on my desktop now just to see what happens.

  • Intel Pentium D 9xx series Compatibility with MSI 955x?

    Hi All,
    I just wanted to get some feedback from others who may be running an Intel Pentium D 9xx series processor on a MSI 955x board.  What processor are you running and have you had any compatiblity problems, strange quirks, etc?
    I found this link as well but wanted to get some real world opinions!
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=664&kind=1
    Thanks!!

    They are compatible and won't have any issues.

Maybe you are looking for