PhD Laser Physicist with 15+ years LabVIEW experience - New England Area

I have a PhD in Laser Physics and 15+ years experience writing successful LabVIEW software at the heart of R+D, test and manufacturing automation projects.
My previous LabVIEW projects have included;
Non-linear simulation tools
User configurable automated test and measurement suites interfacing to 10's of commercial instruments, DAQ interfaces, vision systems and custom microprocessor boards.
Custom scripting language implementations on top of LabVIEW test suites.
Multi-threaded data analysis code with virtual addressing to work with data sets larger than available RAM.
Cameralink and GigE vision system interfacing and image processing analysis and test suites
Writing driver libraries for new instruments.
Hardware Interfacing with DAQmx, IMAQ, GPIB, Serial, USB, GigE vision, Camera Link etc.
Distributed network variable deployment for multi program and multi PC/ networked server/client interfacing solutions.
Interfacing with test equipment such as oscilloscopes, spectrum analyzers, DMM, power supplies, cameras etc. etc.
Excel report generation, data file export.
I also have experience with other languages:
C++ code for my own custom microprocessor solutions (MSP430 family) and development of existing C/C++ code for other target devices.
Visual Basic
AutoIT (for automation of legacy MS Windows software without documented APIs)
Excel VBA
I can also design and implement basic electronics (interfacing to microprocessors and DAQ boards)
My specialty is designing complete turn-key test solutions including; software, firmware, test equipment procurement, custom PC hardware assembly, electronics, microprocessors, test fixturing, documentation, report generation.
My Linked in profile is at: http://www.linkedin.com/profile/view?id=2380460
I live in Massachusetts and would consider opportunities in the New-England area.
References and a copy of my Resume available on request (please PM me).
Kind regards,
Dr. Peter Reeves-Hall

Hi Peter,
I just saw your resume on NI site...are you still looking for employment in NE ? We are manufacturer of PVD systems located in Scituate MA looking for a Labview Engineer.
If you are interested, please send me an e-mail to [email protected]
Regards,
Linda Tardie
Exec. VP
AJA International, Inc

Similar Messages

Testing Engineer with 5 years of experience in LabVIEW

Total work Experience : 5 years
LabVIEW Experience : 4 years
Experience in Testing : 4 years
Preferred Job location: India
I have done various project for R&D department of Automobile industry. Particularly Pump Testing, Brake line , clutch and Auto Slack Adjuster.
Customer for my project : Brakes India, Sundram Fasteners, TVS, WABCO-TVS, HTTS.
Concept of Testing : Friction testing, Performance Testing , Relieve Valve open Testing , Design clearance Testing, Torque Measurement , Pressure measurement and Temperature measurement.
Report Experience: Done Report software in Excel format, Pdf , MySQL and Customer format.
Toolkit Experience : PID, Report generation, Data Base communication.
Network communication: Using Shared variable communication . global variable communication, TCP/IP, RS232
C.V. will be sent through personal mail id on request.
Contact Number : 09994425205

There was this post in the Job Opening board about an Alliance Partner in FL. I have no affiliantion. Just thought it was a coincidence and you might be interested.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How can i get Google maps back on, i lost them with the ios6 update, the new maps are terrible

how can i get Google maps back on, i lost them with the ios6 update, the new maps are terrible

It's still not known if and when Google Maps becomes available in the AppStore. This is today's story: http://www.macrumors.com/2012/09/25/google-has-not-yet-submitted-a-google-maps-a pp-to-apple/

Oracle Apps Financial Ressume Samples with 2 years domain experience

Hello,
I have 2 years of domain experience and i took training of oracle apps functional financial R12 , now i am planning to search for a job in oracle apps, but i am very much confusion with ressume preparation. can anyone help me out with this, and if possible can anyone let me know which is the best way to get a good job.
Regards,
Nisha

I have 2 years of domain experience and i took training of oracle apps functional financial R12 , now i am planning to search for a job in oracle apps, but i am very much confusion with ressume preparation. This is not the right place to get an advice about preparing your resume.
can anyone help me out with this, and if possible can anyone let me know which is the best way to get a good job.Google it, there are many job sites available where you can create a profile and search for jobs.
Thanks,
Hussein

FI-AA new depreciation area - treatment depreciation previous years

Hi,
In the FI-AA module , next to the already existing depreciation area 01 for Fiscal reporting with full integration of postings to FI-GL, I have created a new depreciation area 20 for te purpose of Management reporting which takes over its APC values from depreciation area 01 and does only post different Depreciation values to FI-GL.
Subsequently I updated the data for the new depreciation area in teh already existing asset master data records ( different depreciation keys).
The depreciation calculation and resulting postings for the current year are correct.
However I wonder what will happen with the data for the previous years;
when i look in the asset explorer i do see for the new depr area in the "posted values" tab that it reports for the previous years planned depreciation amounts . However we do not want to post these amounts in the previous years because these years have already been closed and audited.
Will we be able at the end of this fiscal year to changeover FI-AA to the new fiscalyear ( transactions AJAB, AJRW) without the system complaining with error messages that we first need to also perform the depreciation postings for all the previous years in this new depreciation area ?
Many thanks in advance for your much appreciated help.
Kind Regards,
Arjan

Can you please tell me how you added the new depreciaton area to the existing asset masters in those classes ? To get the new depreciation area to show up? We just did the same thing and we're only working with assets that were acquired this year - but we can't get the new depreciation area added to the assets that already existed in those classes. If you figured out how to do that it would sure help us out. I look forward to your response. We're in 4.7.
Thanks
Karla
Never mind found it from reading other posts. I used AFBN and it worked. Thanks
Edited by: Karla Trevithick on Sep 17, 2009 12:39 AM

Looking for LabVIEW Developer with 2-3 years of experience for Mumbai based Company

Software Plantation, Mumbai is currently looking for LabVIEW Developer who can contribute to the development of automated test, data acquisition, and control systems using National Instruments LabVIEW.
This position is located at Lokhandwala, Andheri West, Mumbai.
Requirements:
Applicant must meet the following criteria:
2+ years of LabVIEW experience.
Should be from Engineering background.
Knowledge of various communication protocols like RS-232, Modbus, USB, etc.
Knowledge of NI DAQ hardware boards.
Automated test, measurement, data acquisition, and/or control experience.
Good at documentation.
Knowledge of Software Development Cycle
Must be able to meet objectives as directed.
Ability to effectively work independently.
Ability to contribute and work in a team environment.
Ability to adapt to changing requirements, rapidly absorb new concepts, and apply them effectively.
Good communication skills.
CLAD certified developer will be preferred. Knowledge of C/C++, Linux is an added advantage.
If your background and qualifications match this position, please send your resume via email with subject line as: 'LabVIEW Developer Application'.
E-Mail: [email protected]
Note: Please do not post your resume on the job forum. Mail it to the above mentioned email ID.

Kindly send me your resumes on [email protected]

LabVIEW CLD with 8 years experience in Austin, TX

Hi,
I am a Certified LabVIEW Developer with around 8 years of labVIEW experience which involves working with most of the standard industry protocols. I have worked in both lab and production environments.
I have worked using DAQ, GPIB, PXI, VXI, Fieldpoint, CDAQ, VISION, Motion, Sound and Vibration, Mobile ....Please contact me for additional details.
Regards,
Jagan
[email protected]
256-520-7981

Hi,
We are looking for at least 6-month LabVIEW contractor in San Jose, CA. Please refer to the following link if you are interested:
http://sfbay.craigslist.org/sby/sof/243379434.html
Thanks,
Mark

Smart Software Engineer with LabVIEW experience (and acoustics a plus) needed in Boston, MA

We've are looking for a staff software engineer to join our company in Boston, MA (near downtown). We have a 3000+ vi application that has been in continuous development by multiple software engineers (currently 4 engineers + 1 intern) for 15 years. Every year we release a new version of the software with significant new features. An engineer with our company needs to be more than just a LabVIEW hacker. We need a software engineering that can go into our large application, modify it, sometimes in very fundamental ways, without breaking existing functionality, and have an eye for how their changes impact the maintainability, scalability, reliability, and readability of our code.
Candidates will likely be LabVIEW Architects or have equivalent experience if they don't have formal certification. We lean towards candidates who have Masters Degrees in such fields as Electrical Engineering, Mechanical Engineering, and Computer Science. Interviews will be conducted over phone, web, and in person by a LabVIEW Architect and will need to be able to discuss topics such as the following:
- coupling and cohesion in software design, how this relates to design paterns such as action engines
- software lifecycle models- state machines, parallel loop architectures, race conditions, data structures, type definitions, Xcontrols,
- Object Oriented design
- importance of documentation, importance and use of source code control
- pseudo code and its usefulness as a design tool, some exercises will require users to read and write pseudo code to solve classic computer science problems
- tradeoffs of various file formats in terms of flexibility for future software changes
- FFT, Frequency Response, Amplitude/phase, RMS level, dB, noise, averaging, distortion, loudness, A-weighting
Formal job ad is below:
To be considered for this position, please send resumé and cover letter explaining why you are the ideal candidate for this job (in Word or PDF format only) to [email protected]. Please use the subject title Software Programmer.
Programmer for Audio Test and Measurement software - Boston
Listen, Inc. is the market leader in PC based electro-acoustic test and measurement systems for testing loudspeakers, microphones, telephones, audio electronics, hearing aids and other transducers. We have been in business for over 15 years and our continued growth has created an opportunity for a software engineer to join our programming team. This is an exciting opportunity to work on an industry leading electro-acoustic test and measurement system used by numerous Fortune 500 companies in the field of loudspeaker, microphone, headphone, telecommunications and audio electronic manufacturing.
This position reports to the Software Manager. Duties include, but are not limited to:
Programming in LabVIEW
Designing and coding new Sound Measurement and Analysis software
Improving, reviewing and de-bugging existing code
Preparing internal and user technical documentation
Testing code
Interfacing with management, sales teams and customers to define tasks
Required skills / education
Bachelor’s degree (Masters preferred) in electrical engineering, mechanical engineering, computer science, physics, or similar subject
Strong background (4+ years) in programming with 1+ years in LabVIEW.
A methodical approach to coding, testing and documentation
The ability to work well in a small team. A willingness to challenge and discuss your own and other people’s ideas.
Experience in acoustic engineering is a plus. Relevant topics include FFT, Frequency Response, Amplitude/phase, RMS level, dB, noise, averaging, distortion, loudness, A-weighting
About Listen
Listen has been in business for over 15 years and our suite of PC & sound card audio test & measurement products is the accepted standard in many blue-chip companies worldwide. We offer the spirit and flexibility of a small company, combined with stability and an excellent externally managed benefits package which includes competitive salary, healthcare, paid vacation, retirement plan and more.
Applicants must have authorization to work in the US. We are unable to assist with visa / work permit applications.

we're interviewing candidates, but, this position is still available

Crane Aerospace and electronics is looking for Test Engineers with LabVIEW experience - please disregard previous post.

Here is the correct post:
Are you detail-oriented, creative, and technically skilled at Engineering design and development? Come to Crane Aerospace & Electronics and use your excellent Engineering skills to design, improve, and deliver the next generation of products in the aerospace and electronics Industry!
We have a unique and exciting career opportunity for Engineer II, Test.
You will be responsible for maximizing new product development and manufacturing performance through the creation and deployment of test strategies, tools, and plans. Design and implement high performance hardware and software for test equipment. Authoring test procedures and performing Qualification test activities. Ensure high product quality.
Responsibilities:
Collaborate with customers and multi-disciplined engineers to establish/clarify test, qualification, verification and validation requirements.
Write test plans, procedures, requirements and reports in a highly structured environment.
Analyze, develop and deploy complex and high performance test hardware and software solutions for automated test equipment.
Design, develop, debug, validate & verify the fabrication of manual and automated test equipment at the circuit board and system level, and specify and procure COTS test equipment.
Develop/maintain hardware documentation including block diagrams, schematics, BOMs, wiring diagrams and wiring lists, software documentation, and configuration control of initial release and updates.
Perform detailed calculations to establish test equipment specifications and design margins.
Maintain existing test systems through bug fixes, improvements and modifications.
Support the estimation of costs and schedules to develop or upgrade test platforms.
To perform a number of the above responsibilities with limited supervision.
Minimum Requirements:
Experience: 2-5 years. Previous work experience in aerospace, space or medical electronics industry preferred.
Knowledge: Microprocessor / Microcontroller hardware and firmware design; Analog Circuit and power supply design; Digital Circuit Design including high-speed serial communication design; Firmware programming in c; Schematic Capture, PADS Logic preferred; Circuit Simulation; Fundamentals of magnetic proximity, temperature, and pressure sensing electronics; ESD; Familiarity with testing standards (MIL-810, MIL-704, and DO-160 preferred). Basic laboratory test equipment; LabVIEW experience, certification preferred; Developing hardware per DO-254 and software per DO-178 preferred; Experience with Adobe FrameMaker, IBM Rational tools, TestStand, Microsoft Project preferred.
Skills: Good interpersonal and communication skills (verbal and written)- effectively lead and/or participate in multifunctional teams in a dynamic work environment. Ability to manage multiple tasks, flexibility to switch between tasks and prioritize tasks.
Education/Certification: Bachelors Degree in electrical engineering, computer science, physics or related technical discipline.
Eligibility Requirement: Must be a US Person (under ITAR rules) to be eligible.
Working Conditions:
Working conditions are normal for an office/manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to safety glasses, heel straps, and shop coats.
Requires lifting 25 lbs
Apply online today: http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3170
Crane Aerospace & Electronics offers competitive salaries and outstanding opportunities for career growth and development. Visit our website at CraneAE.com for more information on our company, benefits and great opportunities.
In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check and pass a drug screen prior to employment. FAA sensitive positions require employees to participate in a random drug test pool.

How can you say you are hiring test engineers with LabVIEW, yet the job description doesn't even mention LabVIEW. All I see in there is CAD design.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

SpaceX is looking for engineers with LabVIEW experience in Hawthorne CA (LA area)

SpaceX is looking for engineers with LabVIEW programming experience for our Launch group. Our responsibilities include:
Controlling launch pad equipment via PXI/LabVIEW
Commanding and monitoring our Falcon 1 and Falcon 9 rockets via a LabVIEW-based Vehicle control system
Commanding and monitoring our Dragon capsules via a LabVIEW-based Mission Operation system
Ocean recovery of Falcon 1 and Falcon 9 stages after liftoff and Dragon capsules after splashdown
Cargo configuration of Dragon capsules going to resupply the International Space Station
Maintenance of Mission Control Centers with the help of our IT department
With the exception of the launch pad equipment program, most of our LabVIEW programs do not interact with DAQ hardware (unusual, I know). The Vehicle control and Mission Operations software get their data via Ethernet from 'black boxes' that connect to NASA & Commercial RF ground stations. We also create several utility programs in LabVIEW that also don't interact with hardware. So, this is mostly a software gig, not a hardware/software gig.
Ideal candidates will have the following qualities:
CLD-level LabVIEW experience
A good understanding of basic computer networking (TCP/IP, UPD, firewalls, VPN)
Must be enthusiastic about space (What year did we land on the moon? How many men walked on the moon? How many Space Shuttles do we currently have? etc.)
Must be willing to travel. Common destinations include Houston (NASA Johnson Space Center), McGregor TX (test site), Cape Canaveral FL (launch site), Kwajalein Marshall Islands (launch site)
Must be able to work without supervision. We have a very flat management structure, no one will be telling you what you need to do. If you don’t know, ask. If you do know, get it done.
About the job:
Job is located in Hawthorne, CA in the Los Angeles area.
This is not a 9-5 job. There will be some late nights.
You won't be LabVIEW only. Everyone chips in as needed. Our group has done Javascript, C++, MATLAB, configuring of TELEX comm systems, cutting of metal with bandsaws, welding, Unigraphics CAD, etc. If we need it and you don't know it, grab a book and learn.
We are only hiring full time employees. Contractors need not apply.
To conform to U.S. Government space technology export regulations, SpaceX hires only U.S. citizens and U.S. Permanent Residents.
Apply at SpaceX.com. Click the Careers button and fill out the general application. Mention this posting in the cover letter field. Don’t reply to this forum. You need to go to SpaceX.com to get your information into our system.
Message Edited by Lavezza on 03-31-2010 03:59 PM

There is a job posting up now at SpaceX.com. Go to the careers tab and search for LabVIEW.
Look for the position called: Mission Control Software Engineers (LabVIEW).

M.Tech and Research scholar with 2.5 year LabVIEW experiance looking for profile as LabView Developer

I am M.tech Biomedical enginer and working as research scholar with 1 year experiance and having 2.5 years experiance of labview,vision builder and vision assistant.
Looking for the position of labview developer in good organization..
Mail ID:[email protected]

Hello I wanted to bump this thread up.
I fell time has come time to once again embark on a job search quest for me.
What has changed since the opening thread?:
My CLD has expired, but I intend to recertify using the CLD-R and very quickly once again to CLA. ( plan is to do it in march ).
During my last 2 years I've worked predominatnly in LabVIEW on very high speed DAQ with insane data-rates.
Learned how to do proper multi threading in LabVIEW and work with ginormous data -sets in the hundreds od GB,
Learned how to do proper 64-bit labview apps, and use memory efficiently.
Got experience working on Oil and Gas stuff. Gained Team Lead Experience.
What am I looking for:
Software Architect, Team Lead or Software Manager positions.
I'm also trying to get canadian residence, which should take me approx 10 moths to sort out, but if a job offer came sooner this could boost me.
So Canadian offers are of my particuar interest.
US jobs, unfortunately I do not have a work permint in US, which excludes me from 90% of the jobs on this forum, if any employer has the ability to sponsor please contact tme.
I'm an EU citizen and I do browse the EU offers all the time, but if my profile is interesting to you please don't hesitate and contact me and I'll send you my resume.
Regards,
WibJ

How to maintain year of experience required for a position?

Hi All,
There is a very requirement for a position like "3 years of experience as Executive" I dont know how to maintain this requirement in SAP. Right now we have created a qualification named "Executive Experience" with a time scale assigned to it with a validity period of one year so HR dept must change the scale evey year. It works but it's not best practice. I know if there is a way we can use employee past and current work history to determine the level of experience and also how to define this requirement in position profile.

Hi Dilek,
I maintained all those thing. But i have to do the selection process on the basis of position with year of experience. While doing the selection process via Position or Qualification its picking up the exact applicant. I created a career as 3 years as you said so that the minimum year of experience for that position is 3 years. Then where i can give the year of experience for the applicant? Even though i maintained the previous employer details as 2 years the system is picking up the applicant. Logic wise how to do this?
Please help me to sort out this problem.
Thanks in advance,
Magesh S.

Need a help / advice & guidance whether to switch on my Career in SAP-PM from core industries after spending my 09 years of experience in Core field that to in Maintenance.

Hello Adviser /expert,
Need a help / advice & guidance whether to switch on my Career in SAP-PM from core industries after spending my 09 years of experience in Core field that to in Maintenance.
As now i m thinking to do SAP-PM certified course from authorized SAP partner in India that to Pune.
So any one can suggest authorized SAP partner in India that to Pune.
My introduction (About myself): - I had done my Diploma in Mechanical and had total 09 years of experience in Mechanical Maintenance field that to in different manufacturing company such as Steel, Auto Ancillary & Cotton plant.
Whether its right decision to change my career from Core sector to SAP-PM..??
Is there very good scope in SAP-Pm for me after 09 years of Core Maintenance field..???
Guide me
Warm Regard
Ravin

Ravindra,
SAP PM is very niche Module, very in demand module, at the same time, being niche, getting into it and getting 1 implementation is also difficult.
your decision of joining SAP authorized training is the best option, as a certified consultant, you have more chances to get a break as fresher and you can continue working on it, else it would waste of your intellectual energy.
you just search sap.com training or email them or chat with them, they will give u the training center details,
but very less training classes are available. Try you will get lucky soon

I have 3 +years of experience in SAP ABAP and BRFplus , want to move to australia from India.

Hello Experts,
I have around 3.5 years of experience in SAP -ABAP and SAP-BRFplus . I am based out of india and want to move to Australia.I am trained in ABAP OOPs And Webdynpro. Have worked for around 3 years in Infosys Limited and currently working as Senior Business consultant in SAP ABAP in Ntt Data North America.
I am activly looking for moving to Australia.
So kindly let me know how to go for that.
Regards,
Khushbu

Hi Khushbu
If you want to work in Australia you will need to research the different VISA laws etc. Trying to come "onsite" is a challenge. SAP job demand goes through cycles and sometimes it is difficult to find a position. You might want to look at the large consultancies and see if there is an opportunity for onsite work as part of the project (more than likely make sponsorship easier).
The difficult challenge - most times development work is sent offshore (not all places of course). The work kept in Australia is either they cannot outsource it (federal government and so you need to be an Australian citizen) or it will be more senior staff (10+ years experience). It doesn't mean the work isn't available but you might be competing with other established professionals.
Regards
Colleen

Make your LabVIEW experience more convenient

Hi,
This is where I list all of my wishlist (ideas) together.
Allow to link two arrays so that they can scroll synchronously.
String control/indicator/constant with line number display.
Allow selecting multiple columns to be resized.
Bundle/Unbundle By Name function with 'Hide Full Name' selected by default.
Random number function with option of including/excluding the endpoints.
Allow creating Virtual channels for an internal channel of the DAQ/SCXI.
Auto-Optimization Tool.
Searching text in string and/or path constants in all VIs (opened/unopened) of a project.
Allow using standard shortcuts for 'Cut', 'Copy', 'Paste' and 'Rename' in LLB Manager.
If you feel, it is something similar to your wishlist, please vote for it.
regards
Moderator1983
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

Consolidating all ideas in one post:
This is a short list of all of my wishlists (ideas) together.
Include 'VI Snippet' on the block diagram's toolbar.
Include 'Transpose Array' method in the shortcut menu of a 2D array constant/control/indicator.
Allow selecting multiple columns to be resized.
Random number function with option of including/excluding the endpoints.
Bundle/Unbundle By Name function with 'Hide Full Name' selected by default.
String control/indicator/constant with line number display.
Allow using standard shortcuts for 'Cut', 'Copy', 'Paste' and 'Rename' in LLB Manager.
Auto-Optimization Tool.
Allow creating Virtual channels for an internal channel of the DAQ/SCXI.
Allow to link two arrays so that they can scroll synchronously.
Searching text in string and/or path constants in all VIs (opened/unopened) of a project.
If you feel, it is something similar to your wishlist, please vote for it.
regards
Moderator1983
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

PhD Laser Physicist with 15+ years LabVIEW experience - New England Area

Similar Messages

Maybe you are looking for