PHD no longer able to be created on workstation
Yesterday, I set up a MacBook and created a PHD. I target-moded an old PowerBook G4 so as to migrate (manually) some info from PBook to MBook. The Finder copies hung a few times (bad Firewire cable I presumed), so I stopped it.
I then restarted, and used Sys Pref. to delete the account. It was late and then I realized that I did not click Delete Immediately, and since it was going to take a long time to create the .dmg of the home folder, I decided to Force Quit (OK, I know ... dumb!).
Anyhow, I tried to again to set up to re-create PHD. When starting to sync, I cancelled, but the screen just goes Blue, and then back to login screen.
I've restarted a bunch of times, whereas once in a while, it goes straight to network home without trying to create PHD. I've also trashed some com.apple.MCX.plist files, and even cleared some MCX stuff from NetInfo manager.
At this point, I'd like to try anything else before re-installing the computer. Any ideas?
It's quite possible, but I find Optical drives far too short lived, & a CD Cleaning disc might cost half as much as a new Optical drive if you buy it at the wrong place!...
http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
Similar Messages
-
my old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more importantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account
You need to use the old ID and password to delete the iCloud account. After you delete the old account, you can sign in with the new ID in iCloud.
Have you seen this.
http://support.apple.com/kb/HT5796
iCloud
iOS 6 and later: Go to Settings > iCloud.
If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device. -
No longer able to create a new message window in Apple Mail
Please help! When I am in Apple Mail, I am no longer able to create a new message window (Command-N), and so cannot send any mail. This just started after the most recent OS update yesterday.
Have you tried
1. clicking on the New Message icon?
2. File menu / New Message?
I am trying to figure out if your problem is because Mail is not working, or whether it is a problem elsewhere, e.g. the keyboard. -
HT1550 No longer able to create ALAC version of a WAV file.
When I select a WAV file, song or album I bring up the menu and am offered, 'Create a WAV Version'. It is already a WAV file, why I would I want to create another. How come I am no Longer being able offered thje 'Create ALAC version Option? Anyone know what I need to do to be able to 'Create ALAC Version'?
artmanxxx wrote:
Thanks for the reply ed2345.
It doesn't help me. I used to be able to have WAV as my default import setting. Then if neccesary I was able to 'create ALAC version' by right clicking and selecting it in the menu. I can no longer do that.
Regards, Artman
Artman,
iTunes has always allowed exactly one import setting, and it applies both to CD ripping and to format conversion!
However, it is not that hard to change it and then change it back if you need a different setting for a different purpose, such as creating an ALAC version. -
I am no longer able to create chapters in my Apple TV files
I am no longer able to create chapters in my Apple TV files. When I first started editing on the Mac (November 2009) I had a brand new iMac and Snow Leopard. With Snow Leopard came a 'special' version of QuickTime (QT X?) which were told not to update to 'Pro' (QT 7 Pro). My process was to use FCE with chapter markers to export my home videos to a QuickTime file. FCE created a beautiful .mov file with embedded visual chapters as I had marked them. It imported fine into iDVD. The next step was to 'Save As' within QuickTime and choose to save with the Apple TV profile. The .mov file would be converted and everything, including Chapters, would go with it. From Apple TV, I could peruse my home movies and dig deeper via chapters. Amazing and totally cool.
About 9 months ago, maybe a year, the chapters were no longer saving with the Apple TV format. This meant that each hour long home movie could not be accessed via chapters.
Was this functionality removed from QuickTime X? Is there any way to get it back? I am almost a year behind in my editing since I can no longer easily get the chapter markers in.
Thanks,
D.im glad that somebody is atleast trying. perhaps i need to be more clear.
i will step by step describe the issue in detail.
1) i open an email that contains an attachment .dxf or .pdf
2) i click on the attachment shown in the email and aprompt comes up asking if i want to open or save the attachment.
3) i select save. (by default it saves to a downloads folder. but i have also chosen to use other folders (when i did that it wouldnt save them)
4) i highlight the downloads arrow on the right top side of my browser and click it
5) it pulls down a list of the files that i USED to be able to click and drag onto my destop, or anyplace i chose
6) used to be when i clicked and held the left mouse button down on top of a file of my choosing it would highlight and as i began to drag, a ghost image would appear of the file i was dragging. showing a (/) symbol next to it showing i couldnt drop the file within the browser and a + simbol showing that i could drop the file when the file was hovering over a place where i could drop the file such as my desktop or other folder. now, when i click and hold on the file.... I DONT get anything. when i drag. nothing follows. while i am "dragging" in the area that is my browser, i get the pointy finger icon. as soon as i enter an area where i could have dropped the file as before, i get my standard cursor arrow.
its really as if the drag and drop feature just dosent work IN FIREFOX.
i can drag and drop files all day long everyplace else. -
No longer able to open the application on my MacBook Pro since upgrading to FaceTime 1.0.5 (170). The operating system is OSX 10.6.8.
My problem opening FaceTime after the upgrade is now solved. I didn't pay enough attention when prompted to decide where to store the application upgrade and as a consequence the computer created another "Applications" folder within the existing one. When I subsequently clicked on the icon on the dock to open the application the computer couldn't find the software.
Makerfield2 -
No longer able to drag and drop files to an iPhone in iTunes.
I accidentally unplugged my iPhone 3G before it was finished syncing in iTunes and I lost all of music, playlist, podcasts, etc. I had copied to it. The problem I am now having is that I can no longer drag and drop anything to my iPhone in the Devices list. The only way that I can now get files onto it is by syncing with my existing play lists, etc from iTunes. I can't even select it in the Devices list and create a new playlist on it by clicking the new playlist button at the bottom. I really liked the option to just drag whatever I wanted onto it. It's really a pain now. It does sync properly, so thankfully that works.
Does anyone know why I know why I'm no longer able to drag and drop music, etc. to an iPhone in iTunes.
ThanksMan, I can't believe it...that was the fix. I had it checked previously, obviously because that's how I was doing it before. Don't know how it got unchecked, but that IS the solution. I thought something bad had happened and wasn't thinking clearly – feel like an idiot now.
THANKS for you help. -
Since upgrading to 7.0.3 (iPhone 5, 64gb, with iTunes Match enabled) almost all of my music has vanished from my phone (weirdly some hasn't).
Downloading it again, most of the artwork has been mixed up with other artists, and I'm no longer able to stream or download over 3G (all tracks greyed out), though my network settings etc are all set correctly.
Lastly since upgrading to iOS 7.0.1 (and beyond) Genuis has become effectively useless: it continually asks me to connect to wi-fi, and if I do it creates playlists mostly composed of tracks by the same artists or those very obviously linked to them- previously it created brilliant, nuanced playlists.
Are these things connected, and how do I fix them?I have done this on numerous occasions but I think that my Iphone has a defect. After many tries, reinstalls, deletion of content, changing content to be stored on external hard drive, deleting itunes and cleaning computer I managed to get all of the songs on and things seemed okay for a while.
The problem returned about a week ago after downloading a new album from Itunes. I now have 12.5k of songs leaving 10gb spare on Iphone which should be more than enough room to operate properly. Last night it seemed to be dowloading ok (after doing all of the above again for the umpteenth time) this morning it revealed that it had just synched 2.5k of songs and 18gb of "other" on the contents bar. it wont synch now as it says its over capacity. So the 18gb of "other" would probably be corrupted data that means it must corrupt each song as it tries to synch it.
The 2.5k of songs it did synch are working on the Iphone as is every song in the library on Itunes. I did completely delete the new album I bought and redownloaded it from the store then tried to synch just that album and it worked fine.
Just about time to dump apple I think! -
No longer able to delete photos
To make it easier to access the iPhoto library from multiple users on our computer, I moved the iPhoto Library to /Users/Shared/Pictures and set up permissions so that only the owner has write permission and other users are read-only (we had to do this to sync photos to multiple iPods; sharing via network doesn't allow this). However, despite the library and all subdirectories and files being owned by the user with write permission (and read permission, and execute permission for directories), that user is no longer able to delete photos in iPhoto. Whenever that user tried to delete a photo, iPhoto just beeps.
This seems strange. Why should the library directory location matter? All that should matter is file permissions, and that user has "rw" for ordinary files and "rwx" for directories. So, what's causing this trouble?As Terence mentioned the Shared folder just doesn't work anymore. Here's Apple's document on sharing a library between multiple users: iPhoto: Sharing libraries among multiple users. The disk image method does work and you can set it up in everyone's account preferences to automatically mount then they log in. It would act just like an external HD. You would have to make sure to size it to accommodate growth in the library for some time to come.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard. -
I have a MacBook Air and recently downloaded the new operating system, 10.10 OSX Yosemite. Since that time, I am no longer able to access my personal ITunes library to add music to IPhoto slideshows. I put I tunes library on my desktop, as suggested. How do I drag it to the I Photo slideshow?
That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account. -
My N97 is no longer able to send outgoing e-mail t...
After a hard reset, my N97 is no longer able to send outgoing e-mail through my Gmail account. I had to set up my e-mail account again on the N97 after the hard reset. I created the e-mail settings with the mailbox guide. I can retrieve my e-mail messages but I am no longer able to send a new e-mail message.
Now, when I create a new e-mail message (Options, Create message, E-mail) and I select "Send" after creating the message, the N97 keeps trying to connect to my mailbox and gives up after several minutes.
Before the hard reset, I had no problems receiving and sending e-mail messages on my N97, using my Gmail account. What should I do to make it send new e-mail messages?
Solved!
Go to Solution.Sounds like something is wrong in your settings,
Either delete the account from your phone and set it up again or use the G-Mail website help to find the correct settings and manualy check and adjust your phones outgoing settings to match
= =
I already tried those without working. I have deleted the account from my phone and set it up again. Also, I used the G-Mail website Help to find the correct settings and manualy check and adjust my phone's outgoing settings to match. It is not sending the outgoing e-mail messages. I keep getting this notice: Connecting to mailbox. After a while it stops without sending the e-mail message.
It wasn't like that before the hard reset. -
JDeveloper 11.1.1.1.0 no longer able to deploy any application.
JDeveloper 11.1.1.1.0 no longer able to deploy any application.
None of may applications can depoly today. Something must have happened to Jdeveloper or my environment. (The joy of automatic updates). Not much in the way of diagnostics here.
Anyone have ANY IDEA where I should look to get things working again?
Thanks.
<Aug 14, 2009 2:07:00 PM MDT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<Aug 14, 2009 2:07:00 PM MDT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<Aug 14, 2009 2:07:01 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Aug 14, 2009 2:07:01 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Aug 14, 2009 2:07:03 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: Application ID : wsm-pm
Aug 14, 2009 2:07:03 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: "Metadata Services: Metadata archive (MAR) not found."
<Aug 14, 2009 2:07:05 PM MDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Leslie Bischoff\Application Data\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Aug 14, 2009 2:07:05 PM MDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Leslie Bischoff\Application Data\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00040. Log messages will continue to be logged in C:\Documents and Settings\Leslie Bischoff\Application Data\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Aug 14, 2009 2:07:05 PM MDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
Aug 14, 2009 2:07:05 PM oracle.wsm.audit.Auditor <init>
INFO: Created J2EE application auditor for componentType=oracle.security.jps.internal.audit.AuditServiceImpl$Auditor@220a0c
Aug 14, 2009 2:07:05 PM oracle.adf.share.config.ADFConfigFactory getInstance
INFO: ADF Config instance implementation in use is : oracle.adf.share.config.MDSConfigFactory
Aug 14, 2009 2:07:08 PM oracle.adf.share.config.ADFMDSConfig parseADFConfiguration
INFO: Configuration file:/META-INF/adf-config.xmlcannot not be read by MDS. Reading directly from the classpath
<Aug 14, 2009 2:07:08 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Aug 14, 2009 2:07:08 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Aug 14, 2009 2:07:08 PM MDT> <Warning> <Server> <BEA-002611> <Hostname "pds-b09fd1a25c4", maps to multiple IP addresses: 10.10.10.10, 192.168.0.68, 192.168.40.19>
<Aug 14, 2009 2:07:08 PM MDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Aug 14, 2009 2:07:08 PM MDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.10.10.10:7101 for protocols iiop, t3, ldap, snmp, http.>
<Aug 14, 2009 2:07:08 PM MDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.0.68:7101 for protocols iiop, t3, ldap, snmp, http.>
<Aug 14, 2009 2:07:08 PM MDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 192.168.40.19:7101 for protocols iiop, t3, ldap, snmp, http.>
<Aug 14, 2009 2:07:08 PM MDT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Aug 14, 2009 2:07:08 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Aug 14, 2009 2:07:08 PM MDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Failed to start DefaultServer.Before I go ahead and reinstall Jdeveloper, I looked in the install directory at recently changed files and found.../jdeveloper/jdev/bin/hs_err_pid1024.log which was written this morning when the problem occurred.
# An unexpected error has been detected by Java Runtime Environment:
# Internal Error (nmethod.cpp:1720), pid=1024, tid=3892
# Error: guarantee(cont_offset != 0,"unhandled implicit exception in compiled code")
# Java VM: Java HotSpot(TM) Client VM (11.0-b16 mixed mode windows-x86)
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
--------------- T H R E A D ---------------
Current thread (0x33b46400): JavaThread "AWT-EventQueue-0" [_thread_in_Java, id=3892, stack(0x34040000,0x34140000)]
Stack: [0x34040000,0x34140000]
[error occurred during error reporting (printing stack bounds), id 0xe0000000]
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x3750f400 JavaThread "CacheCleaner" daemon [_thread_blocked, id=3724, stack(0x3ad10000,0x3ae10000)]
0x37dd8400 JavaThread "Worker-2" daemon [_thread_blocked, id=2288, stack(0x3ac10000,0x3ad10000)]
0x374cf400 JavaThread "Worker-1" daemon [_thread_blocked, id=3260, stack(0x3a910000,0x3aa10000)]
0x35d00800 JavaThread "Worker-0" daemon [_thread_blocked, id=2456, stack(0x3a590000,0x3a690000)]
0x3742cc00 JavaThread "Log Poller" [_thread_blocked, id=872, stack(0x3aa10000,0x3ab10000)]
0x37534400 JavaThread "index-query-thread-1" [_thread_blocked, id=2908, stack(0x3a790000,0x3a890000)]
0x374d5400 JavaThread "index-update-thread-1" [_thread_blocked, id=3524, stack(0x3a690000,0x3a790000)]
0x3570d800 JavaThread "file-table-thread-1" [_thread_blocked, id=2248, stack(0x3a390000,0x3a490000)]
0x37379800 JavaThread "pool-2-thread-2" [_thread_blocked, id=3884, stack(0x3a270000,0x3a370000)]
0x37338800 JavaThread "pool-2-thread-1" [_thread_blocked, id=2564, stack(0x3a170000,0x3a270000)]
0x3727dc00 JavaThread "pool-3-thread-1" [_thread_blocked, id=708, stack(0x3a070000,0x3a170000)]
0x3717a000 JavaThread "pool-1-thread-1" [_thread_blocked, id=2516, stack(0x39ed0000,0x39fd0000)]
0x37079000 JavaThread "status-0" [_thread_blocked, id=2336, stack(0x35e30000,0x35f30000)]
0x35d86800 JavaThread "BufferDomModel background parse thread" daemon [_thread_blocked, id=2708, stack(0x39bd0000,0x39cd0000)]
0x35700c00 JavaThread "TextBufferScavenger" [_thread_blocked, id=2868, stack(0x39dd0000,0x39ed0000)]
0x35bef800 JavaThread "WaitCursor-Timer" [_thread_blocked, id=960, stack(0x39cd0000,0x39dd0000)]
0x356a4800 JavaThread "Timer queue for AWT thread" daemon [_thread_blocked, id=492, stack(0x39ad0000,0x39bd0000)]
0x35c05400 JavaThread "toplink-pool-1-thread-1" [_thread_blocked, id=3428, stack(0x393a0000,0x394a0000)]
0x35c20400 JavaThread "WeakDataReference polling" [_thread_blocked, id=3668, stack(0x392a0000,0x393a0000)]
0x35457c00 JavaThread "Native Directory Watcher" [_thread_in_native, id=3728, stack(0x38cf0000,0x38df0000)]
0x35743400 JavaThread "IconOverlayTracker Timer" [_thread_blocked, id=1856, stack(0x391a0000,0x392a0000)]
0x35729400 JavaThread "IconOverlayTracker Timer" [_thread_blocked, id=2928, stack(0x390a0000,0x391a0000)]
0x353d4000 JavaThread "Thread-4" daemon [_thread_in_native, id=3592, stack(0x38df0000,0x38ef0000)]
0x35900c00 JavaThread "TimerQueue" daemon [_thread_blocked, id=1284, stack(0x38af0000,0x38bf0000)]
0x33a9dc00 JavaThread "TimedCache-Timer" daemon [_thread_blocked, id=3228, stack(0x33f40000,0x34040000)]
=>0x33b46400 JavaThread "AWT-EventQueue-0" [_thread_in_Java, id=3892, stack(0x34040000,0x34140000)]
0x33b55400 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3748, stack(0x33e40000,0x33f40000)]
0x33b54000 JavaThread "AWT-Shutdown" [_thread_blocked, id=2848, stack(0x33d40000,0x33e40000)]
0x33b50800 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1880, stack(0x33c40000,0x33d40000)]
0x33145000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3576, stack(0x337b0000,0x338b0000)]
0x3313f800 JavaThread "CompilerThread0" daemon [_thread_blocked, id=968, stack(0x336b0000,0x337b0000)]
0x3313dc00 JavaThread "Attach Listener" daemon [_thread_blocked, id=1580, stack(0x335b0000,0x336b0000)]
0x3313c800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2524, stack(0x334b0000,0x335b0000)]
0x3312d000 JavaThread "Finalizer" daemon [_thread_blocked, id=3940, stack(0x333b0000,0x334b0000)]
0x33128400 JavaThread "Reference Handler" daemon [_thread_blocked, id=3880, stack(0x332b0000,0x333b0000)]
0x008d7400 JavaThread "main" [_thread_blocked, id=3368, stack(0x00030000,0x00130000)]
Other Threads:
0x33124c00 VMThread [stack: 0x331b0000,0x332b0000] [id=3116]
0x33147800 WatcherThread [stack: 0x338b0000,0x339b0000] [id=2484]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 18304K, used 3568K [0x030b0000, 0x04480000, 0x05810000)
eden space 16320K, 14% used [0x030b0000, 0x03305b20, 0x040a0000)
from space 1984K, 59% used [0x04290000, 0x043b6880, 0x04480000)
to space 1984K, 0% used [0x040a0000, 0x040a0000, 0x04290000)
tenured generation total 242224K, used 160242K [0x05810000, 0x1449c000, 0x230b0000)
the space 242224K, 66% used [0x05810000, 0x0f48cbc0, 0x0f48cc00, 0x1449c000)
compacting perm gen total 139520K, used 139376K [0x230b0000, 0x2b8f0000, 0x330b0000)
the space 139520K, 99% used [0x230b0000, 0x2b8cc310, 0x2b8cc400, 0x2b8f0000)
No shared spaces configured.
Dynamic libraries:
0x00400000 - 0x0040b000 C:\Oracle\Middleware\jdeveloper\jdeveloper.exe
0x7c900000 - 0x7c9b2000 C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll
0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll
0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL
0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f02000 C:\WINDOWS\system32\RPCRT4.dll
0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll
0x00840000 - 0x0085a000 C:\Oracle\Middleware\jdeveloper\ide\bin\launcher.dll
0x7c9c0000 - 0x7d1d7000 C:\WINDOWS\system32\SHELL32.dll
0x77c10000 - 0x77c68000 C:\WINDOWS\system32\msvcrt.dll
0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll
0x763b0000 - 0x763f9000 C:\WINDOWS\system32\comdlg32.dll
0x5d090000 - 0x5d12a000 C:\WINDOWS\system32\COMCTL32.dll
0x773d0000 - 0x774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\comctl32.dll
0x6e610000 - 0x6e67b000 C:\PROGRAM FILES\NORTON 360\ENGINE\3.0.0.134\ASOEHOOK.DLL
0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll
0x77120000 - 0x771ab000 C:\WINDOWS\system32\OLEAUT32.dll
0x7c340000 - 0x7c396000 C:\Oracle\Middleware\jdk160_11\bin\msvcr71.dll
0x74720000 - 0x7476c000 C:\WINDOWS\system32\MSCTF.dll
0x6d8b0000 - 0x6db06000 C:\Oracle\Middleware\jdk160_11\jre\bin\client\jvm.dll
0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll
0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime
0x6d330000 - 0x6d338000 C:\Oracle\Middleware\jdk160_11\jre\bin\hpi.dll
0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL
0x6d860000 - 0x6d86c000 C:\Oracle\Middleware\jdk160_11\jre\bin\verify.dll
0x6d3d0000 - 0x6d3ef000 C:\Oracle\Middleware\jdk160_11\jre\bin\java.dll
0x6d8a0000 - 0x6d8af000 C:\Oracle\Middleware\jdk160_11\jre\bin\zip.dll
0x6d6c0000 - 0x6d6d3000 C:\Oracle\Middleware\jdk160_11\jre\bin\net.dll
0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll
0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll
0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll
0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll
0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll
0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll
0x6d0b0000 - 0x6d1e8000 C:\Oracle\Middleware\jdk160_11\jre\bin\awt.dll
0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV
0x6d2d0000 - 0x6d324000 C:\Oracle\Middleware\jdk160_11\jre\bin\fontmanager.dll
0x6d610000 - 0x6d619000 C:\Oracle\Middleware\jdk160_11\jre\bin\management.dll
0x34160000 - 0x3417b000 C:\Oracle\Middleware\jdeveloper\ide\lib\idenative.dll
0x6d6e0000 - 0x6d6e9000 C:\Oracle\Middleware\jdk160_11\jre\bin\nio.dll
0x3d930000 - 0x3da00000 C:\WINDOWS\system32\WININET.dll
0x36260000 - 0x36269000 C:\WINDOWS\system32\Normaliz.dll
0x3dfd0000 - 0x3e015000 C:\WINDOWS\system32\iertutil.dll
0x76ee0000 - 0x76f1c000 C:\WINDOWS\system32\RASAPI32.dll
0x76e90000 - 0x76ea2000 C:\WINDOWS\system32\rasman.dll
0x5b860000 - 0x5b8b5000 C:\WINDOWS\system32\NETAPI32.dll
0x76eb0000 - 0x76edf000 C:\WINDOWS\system32\TAPI32.dll
0x76e80000 - 0x76e8e000 C:\WINDOWS\system32\rtutils.dll
0x769c0000 - 0x76a74000 C:\WINDOWS\system32\USERENV.dll
0x77c70000 - 0x77c94000 C:\WINDOWS\system32\msv1_0.dll
0x76d60000 - 0x76d79000 C:\WINDOWS\system32\iphlpapi.dll
0x722b0000 - 0x722b5000 C:\WINDOWS\system32\sensapi.dll
0x68000000 - 0x68036000 C:\WINDOWS\system32\rsaenh.dll
0x6d290000 - 0x6d298000 C:\Oracle\Middleware\jdk160_11\jre\bin\dt_shmem.dll
0x38ef0000 - 0x3908f000 C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\brio08b.dll
0x6a900000 - 0x6aaf7000 C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\briu08b.dll
0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll
0x742e0000 - 0x742f5000 C:\WINDOWS\system32\SPOOLSS.DLL
0x39090000 - 0x3909f000 C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\BRIL08B.DLL
0x73b30000 - 0x73b45000 C:\WINDOWS\system32\mscms.dll
0x6d240000 - 0x6d263000 C:\Oracle\Middleware\jdk160_11\jre\bin\dcpr.dll
0x6d620000 - 0x6d6b3000 C:\Oracle\Middleware\jdk160_11\jre\bin\mlib_image.dll
0x662b0000 - 0x66308000 C:\WINDOWS\system32\hnetcfg.dll
0x71a90000 - 0x71a98000 C:\WINDOWS\System32\wshtcpip.dll
0x6d500000 - 0x6d524000 C:\Oracle\Middleware\jdk160_11\jre\bin\jpeg.dll
VM Arguments:
jvm_args: -Xmx512M -Xms64M -Xverify:none -XX:JavaPriority10_To_OSPriority=10 -XX:JavaPriority9_To_OSPriority=9 -XX:MaxPermSize=256M -Xbootclasspath/p:../lib/lwawt.jar -Dsun.awt.keepWorkingSetOnMinimize=true -XX:+HeapDumpOnOutOfMemoryError -Doracle.jdeveloper.webservice.showAllOwsmPolicyTypes=false -Doracle.jdeveloper.webservice.hidePropertyOverride=false -Dide.startingArg0=C:\Oracle\Middleware\jdeveloper\jdeveloper.exe -Dide.launcherProcessId=1024 -Dide.config_pathname=C:\Oracle\Middleware\jdeveloper\jdev\bin\jdev.conf -Dide.startingcwd=C:\Documents and Settings\Leslie Bischoff\Desktop -Dide.shell.enableFileTypeAssociation=C:\Oracle\Middleware\jdeveloper\jdeveloper.exe -Dide.pref.dir.base=C:\Documents and Settings\Leslie Bischoff\Application Data -Dide.work.dir.base=C:\Documents and Settings\Leslie Bischoff\My Documents
java_command: <unknown>
Launcher Type: generic
Environment Variables:
PATH=C:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\WiFi\bin\
USERNAME=Leslie Bischoff
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 3
CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 15 stepping 13, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3
Memory: 4k page, physical 2097151k(2097151k free), swap 4194303k(3874168k free)
vm_info: Java HotSpot(TM) Client VM (11.0-b16) for windows-x86 JRE (1.6.0_11-b03), built on Nov 10 2008 02:15:12 by "java_re" with MS VC++ 7.1
time: Tue Aug 11 20:39:57 2009
elapsed time: 892 seconds -
No longer able to select customized color theme for a collection page?
Previously I have been able to select a custom colour theme for my collections in Public Site Manager by clicking on Collections > Configure Selected Collection > Theme
The ‘theme’ tab is no longer showing – see screenshot –
Does this mean we can longer apply a custom theme (custom colours etc.) to our collection pages?
It seems we can still create themes (see screenshot below) but we’re no longer able to apply them to collection pages. Is anyone else seeing this?What I don't understand is - if Apple have got rid of themes on collection pages - then I would expect a generic theme to be applied retrospectively to all existing collection pages. What I see however is my custom theme on all my existing pages i.e. no change - but when I create a new collection obviously I now don't have the option to apply the custom theme - so I get a generic white on dark grey theme on new collection pages. In summay my existing pages have my custom theme applied and a few new pages have the generic theme and there's way for me to make them all look consistent.
-
Since downloading Security Update 2012, Word for Mac 2004 is no longer able to Save or Save As documents. After clicking Save or Save As, the program ceases to respond and must be Force Quit. Any tips on making Word functional again?
There was a second Security Update (v1.1). Did you download that one. It was supposed to have fixed the problems created by the prior update. At least is solved my problems with Quicken 2007 for Mac and AppleWorks 6.
-
Why am I longer able to view video tutorials
I have PSE9. When I first got the software I was able to view video tutorials. It seems that since PSE10 came out I am not longer able to view them. Once the tutorial loads in, the screen for viewing remains black. What is the solution to be able to view again these video tutorials?
Nothing has changed since I purchased PSE9. My browser is Firefox.The only
thing that I can think of is that PSE10 came out and now I can no longer
view the tutorial videos I used to be able to watch.
I am worried that if I try to uninstall PSE9 that I will not be able to
reinstall it. I have the disk for the program but I worry about the
re-registration. I bought this on Amazon just prior to the release of PSE10. It was
selling at a very discounted price, that is why I bought it. Everything
worked fine till a few weeks ago.
In a message dated 5/21/2012 4:25:46 P.M. Eastern Daylight Time,
[email protected] writes:
Re: Why am I longer able to view video tutorials
created by photodrawken (http://forums.adobe.com/people/photodrawken) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4426986#4426986)
Maybe you are looking for
-
I've tried EVERYTHING suggested in this link (http://blog.timolthof.com/outlook-no-default-mail-client-error/) and everything google and bing and still this message keeps popping up. Now when I do a windows search for email, I'm not able to view the
-
Why can't I access my roommates' Windows computers through samba?
I'm using KDEmod. I can see our workgroup, MSHOME, by going through system -> remote places -> samba shares. Sometimes, I can open the workgroup and see my roommates computers but if I try to access them, Konqueror will time out. As of this very s
-
Monitor OSPFv3 via SNMP not working - Is OSPFv3 MIB supported?
I need to be able to query the OSPFv3-MIB via SNMP to track the status of OSPFv3. I have setup a 3945 router in a test lab network and I have configured it in an Ipv6 network with OSPFv3. The router has an active OSPFv3 neighbor and I can use that n
-
*7.01 LOSAPKRN during upgrade -- /*SYSBAS incorrectly inserted in path*
Hallo Everybody, This issue is solved by the ILE-Patch #88 which should be used during upgrade from now on. The patch will shortly be available in the service marketplace but can also be downloaded from the URL [https://sapmats-de.sap-ag.de/downlo
-
How do i create indexes for the create table statement below? CREATE table Position (PositionID number(20) not null, title nvarchar2(255), SkillSetID number(20), TaskSetID number(20), filledByResumeID number(20), filledOnDate nvarchar2(40), descripti