Phenom II x3 720 BE doesn`t run Cool`n Quiet

Hello. Almost a week running my new x3 720 and seems to be OK. Temps are 19ºC on boot, 31-32ªC idle and 37-39º running Photoshop CS3 with some heavy image files, 80-120Mb. Just for try, I did overclocked it up to 3.2 Ghz (200x16 and 1.47V) and temperature went up to 46-47ºC. ¿Is this normally? I did it slowly, mounting x0.5, 14.5/15/15.5/16 and rebooting every step. First I changed voltage to 1.5V, when I reached the3.2 Ghz I went down a little, at 1.47. Stable and running great. However, I don`t think 46ºC are better than 32ºC, so I get back to its original x14 and 32ºC.
Also, just for try, I boot and enabled the Cool`n Quiet. Never did it before with the others Athlon x64 Dual Core, I never saw what`s the difference. Now, my K9N2 sli platinum can`t activate this function. I tyred several times, enableling and rebooting and nothing. Seems the same mobo is deactivating this function on the reboot.
What`s this?
Regards,
Florin

Hello. I`m running Win7 x86. Really, that`s only curiosity, isn`t my intention to use that feature. I only try to see if everything is running normally. May be that: on Control Panel/Energy options I activated High Efficiency. Could be.
No OC, I don`t want more heat. I just figured that by mistake I used a different thermal grease when I upgraded the new Phenom II x3 720 BE, using a generic one instead of the OCZ one, much more better. Later, I`ll repace it.
Windows7 experience is 5.9:
Processor 6.8
RAM Memory 7.0
Graphics 6.9
HD transference speed 5.9
My system is:
MSI K9N2 Sli Platinum
Phenom II x3 720 BE with Thermaltake Venus 12 cooler
4Gb (2x2Gb) Patriot PC2 6400 EPP1.0 Viper High performance / 800Mhz / 4-4-4-12-21-2T-2.1V
MSI nVidia GForce 9600GT / 512 Mb
x2 WDigital Caviar Black bulk / sata 300 / 32Mb cache / 750Gb each
DVD-RW Plextor px-810SA
PS Xion Power Real 2.2 / 600W
Aluminium case Viper XG with x3 120mm Ever Cool Spider fans (front, back, up)
1 monitor LG Fantasy 19" / 4:3
1 monitor Siragon 22" / 19:10
Logitech 2.1 sound system (subwoffer + x2 three way speakers)
Microsoft curve keyboard
Microsoft IE mouse
Regards

Similar Messages

MSI K9N2 SLI Platinum + upgraded processor Phenom II x3 720 BE

Hello everybody. After y changed (upgraded) my 4Gb Corsair XMS2 DH PC26400C4 memos for the better Patriot Extreme Performance Viper Series 4 GB PC2-6400 DDR2-800 Dual Channel nVidia EPP Certified - PVS24G6400LLKN, I had no more BSOD and crashes, as I told you before in some older post. This splendid memory had 7.0 points in the Windows 7 experience, runs cool and fast the 4-4-4-12 / 2T/ 2.1V timings.
Some days ago I had the opportunity to upgrade the processor. My almost new (10 month used) Athlon 64x2 5400+ / 2.8Ghz worked fine, fast, very cool with Win 7 x86 (20º-22ºC at idle and 27º-28º full charged), wonderfull. I bought a brand new Phenom II x3 720 Black Edition (unlocked) and install it at once. Well, I had to upgrade the v3.2 bios to v3.5. Even Win7 didn`t recognized the new hardware, neither CPUz, nothing. Then, everything was fine.
It works a little hotter (32ºC-33ºC idle up to 40ºC in the video edition. My cooling system (heat sink) is a Thermaltake Venus 12 with OCZ thermal grease.
Speed seems to be the same, no faster than the other 2.8Ghz but some tasks seem to be easier to accomplish. Has 2 days running fine. I`ll keep you in touch about.
Regards,
Florin

Hello. Sorry for the delay, some hours of difference.
Well, the stock heat sink has a new design, I like it but I think AMD should try a bigger fan. They changed the aluminium base sink, has more and thinner fins but the fan is the same slim 8 cm one. I had to do something now, maybe during the afternoon I`ll have some some shots with the camera and upload them for you.
I`m using the Thermaltake Venus 12 (difficult to buy, it`s not such new model) which is full copper made, 74 sins and a big 9 cm fan, 1500-6000rpm with 80.000 hours/life. Not bad. Has auto (by heat sensor) and manual (by bracket) adjustments of the rpm.
Temperatures TMPIN0 /TMPIN1 are north and south bridge. TMPIN2 is a dead sensor, nothing to worry.
This is today snapshot of HWMonitor:
This is the CPUz v1.55 snapshot:
Regards

I have downloaded Indesign CC2014 and installed 3-4 times but it doesn't run. I have installed on Windows 7 64 bit , HP laptop i7

I have downloaded Indesign CC2014 and installed 3-4 times but it doesn't run /work. I have installed on Windows 7 64 bit , HP laptop i7.

sign out and then sign back in to your cc desktop app.
then install cc 2014.

HT204150 After having upgraded to mountain lion, the application "contacts" doesn't run. I don't see any contact and add new contacts . The application doesn't run

After having upgraded to mountain lion, why the application "contacts" doesn't run? Why is impossible add a new contact and I don't see old contacts that I can see on my Ipad?

I have the same problem. I would like to include this information:
.- A message "error CoreDAVerrorDomain 1" is shown
.- with other user, in the same MAC I do not have the problem

Crystal Report doesn't run on the production PC

I developed a report using VS 2005/Crystal Report. The report has three on-demand sub reports and some subreports. It runs well on my PC, but doesn't run on the production PC, on that PC, I only can see the report header or few columns. The difference (I can tell) between my PC and the production PC is my PC has VS 2005 installed.
Is there anything I can do to make the report running on the production PC?
Thanks.

Hi Jhon,
Have you installed the runtimes of CR of VS2005 on your server, if not than please install from(only applicable if you are using the bundle version of CR i.e. CR 10.2 which comes with VS 2005) [here|http://resources.businessobjects.com/support/additional_downloads/runtime.asp#07].
Note- use the appropriate version of merge modules for 64 or 32 bit machine
hope this works
Regards,
Amit

How to use airport time capsule on a dell portable pc with windows 7 taking in consideration that Time machine doesn't run with Windows ?

how to use airport time capsule on a dell portable pc with windows 7 taking in consideration that time machine doesn't run with Windows ?

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

Have downloaded firefox update 3 times and it doesn't run

I have just started to use firefox on my pc which has windows 7. I keep getting a message saying I need to update the version of firefox, so I down load it and it says it is downloaded ( I now have it 3 times) but it doesn't run and still keepstellin me I need to upgrade it??? DO I just go back to internet explorer???

Your browser reported to the forum that you are running version 3.6.6. Can you verify that using the Help > About Firefox dialog?
Which file did you download: Firefox 3.6.27 or Firefox 10.0.2?
(If you need to re-download, you can choose from the files on these pages:<br>http://www.mozilla.org/en-US/firefox/all for 10.0.2 or <br>http://www.mozilla.org/en-US/firefox/all-older for 3.6.27)
Make sure to close Firefox before launching the installer for the newer version. Do you get any error messages when you start it? It might take a minute for the installer to check itself before you get a dialog.

After effects CC doesn't run on MAC PRO

after effects CC doesn't run on MAC PRO. Only the CS6 version run on this machine. What can i do. Thanks.

With my MACPRO it's impossible to activate the GPU.
What can we do. Now it's impossible to enable a video in AECC.
For information the configuration of my machine and the windows of error in after effect CC.

Applet embedded in JSP doesn't run on browser with older than JRE-1.6

I have embeded an Applet in my JSP Page which used JDK1.6's getHardwareAddress() method to get user's physical address.
I have embeeded this into a JAR file and used it in my JSP where this applet run on onload() event of the form --> runs the applet --> and gets physical address of user machine and prints it in one of the text boxes on the form.
Now, the issue is that the applet doesn't run on browser that doesn't support JRE 1.6
My concern is that how can I run this (if at all possible) in browsers that support lower versions of JRE or is it possible to check that if the browser doesn't support JRE 1.6 then load the basic version of form without running the applet. Can i actually check the version of browser JRE somehow and stop to execute the applet. Because what happens as of now is that if the applet doesn't execute, the complete form fails to load.
The last option is that I give a message on my web page that redirects user to Sun Java site and asks them to update their browsers.

Personally, I have no knowledge about Applet but have you checked this link?
[http://blogs.sun.com/thejavatutorials/entry/deployment_toolkit_101|http://blogs.sun.com/thejavatutorials/entry/deployment_toolkit_101]

PLSQL compiles but doesn't run.. I've declared it everywhere but still..

PLSQL compiles but doesn’t run.. I’ve declared it everywhere but still..
Afternoon.. Hopefully a quick one for someone.. I’m trying to run a Concurrent Program in ORACLE Financials using a Data Template derived BI Publisher report.
Error message received..
SUBIXCLT module: UofS Expense Claim Tracking Report
+--------------------------------------------------------------------------
All Parameters: raisedby=:status=:claimant=:expense_date_from=:expense_date_to=:LP_ORDERED_BY=Expense Report Number
Data Template Code: SUBIXCLT
Data Template Application Short Name: PO
Debug Flag: N
{raisedby=, claimant=, expense_date_to=, expense_date_from=, status=, LP_ORDERED_BY=Expense Report Number}
Calling XDO Data Engine...
[060410_025628319][][STATEMENT] Start process Data
[060410_025628324][][STATEMENT] Process Data ...
[060410_025628329][][STATEMENT] Executing data triggers...
[060410_025628329][][STATEMENT] BEGIN
SUBIXCLT.claimant := :claimant ;
SUBIXCLT.expense_date_from := :expense_date_from ;
SUBIXCLT.expense_date_to := :expense_date_to ;
SUBIXCLT.raisedby := :raisedby ;
SUBIXCLT.status := :status ;
SUBIXCLT.lp_ordered_by := :lp_ordered_by ;
:XDO_OUT_PARAMETER := 1;
END;
l_flag Boolean;
BEGIN
l_flag := SUBIXCLT.BEFOREREPORT(L_ORDERED) ;
if (l_flag) then
:XDO_OUT_PARAMETER := 1;
end if;
end;
[060410_025628356][][EXCEPTION] SQLException encounter while executing data trigger....
java.sql.SQLException: ORA-06550: line 4, column 33:
PLS-00201: identifier 'L_ORDERED' must be declared
ORA-06550: line 4, column 1:
PL/SQL: Statement ignoredThe Data Template
The Data Template
<?xml version="1.0" encoding="utf-8" ?>
- <dataTemplate name="UofS_OutstandngExpenses_Report" defaultPackage="SUBIXCLT" dataSourceRef="FINDEV" version="1.0">
- <properties>
<property name="xml_tag_case" value="upper" />
<property name="include_parameters" value="true" />
<property name="debug_mode" value="on" />
</properties>
- <parameters>
<parameter name="claimant" dataType="character" defaultValue="" />
<parameter name="expense_date_from" dataType="date" defaultValue="" />
<parameter name="expense_date_to" dataType="date" defaultValue="" />
<parameter name="raisedby" dataType="character" defaultValue="" />
<parameter name="status" dataType="character" defaultValue="" />
<parameter name="lp_ordered_by" dataType="character" defaultValue="" />
</parameters>
- <dataQuery>
<dataTrigger name="beforeReportTrigger" source="SUBIXCLT.BEFOREREPORT(L_ORDERED)" />
- <sqlStatement name="Q1">
- <![CDATA[
SELECT DISTINCT
erh.invoice_num,
pap.full_name EMP_CLAIMING,
DECODE(NVL(erh.expense_status_code, 'Not yet Submitted (NULL)'), 'CANCELLED', 'CANCELLED',
     'EMPAPPR', 'Pending Individuals Approval',      'ERROR', 'Pending System Administrator Action',
     'HOLD_PENDING_RECEIPTS     ', 'Hold Pending Receipts', 'INPROGRESS', 'In Progress', 'INVOICED', 'Ready for Payment',
     'MGRAPPR', 'Pending Payables Approval', 'MGRPAYAPPR', 'Ready for Invoicing', 'PAID', 'Paid',
     'PARPAID', 'Partially Paid',     'PAYAPPR', 'Payables Approved',     'PENDMGR', 'Pending Manager Approval',
     'PEND_HOLDS_CLEARANCE', 'Pending Payment Verification',     'REJECTED', 'Rejected',     'RESOLUTN',     'Pending Your Resolution',
     'RETURNED',     'Returned',     'SAVED',     'Saved',     'SUBMITTED',     'Submitted',     'UNUSED',     'UNUSED',
     'WITHDRAWN','Withdrawn',     'Not yet Submitted (NULL)') "EXPENSE_STATUS" ,
NVL(TO_CHAR(erh.report_submitted_date,'dd-MON-yyyy'),'NULL') SUBMIT_DATE,
NVL(TO_CHAR(erh.expense_last_status_date,'dd-MON-yyyy'),'NULL') LAST_UPDATE,
erh.override_approver_name ER_Approver,
fu.description EXP_ADMIN,
erh.total,
erh.description
FROM
AP_EXPENSE_REPORT_HEADERS_all erh,
per_all_people_f pap, fnd_user fu
WHERE erh.employee_id = pap.person_id
AND fu.user_id = erh.created_by
AND NVL(erh.expense_status_code, 'Not yet Submitted') NOT IN ('MGRAPPR', 'INVOICED', 'PAID', 'PARPAID')
AND pap.full_name = NVL(:claimant, pap.full_name)
AND TRUNC(erh.report_submitted_date) BETWEEN NVL(:expense_date_from, '01-JAN-1999') AND NVL(:expense_date_to,'31-DEC-2299')
AND fu.description = NVL(:raisedby,fu.description)
AND erh.expense_status_code = NVL(:status,erh.expense_status_code) &LP_ORDERED_BY
]]>
</sqlStatement>
</dataQuery>
<dataTrigger name="beforeReportTrigger" source="SUBIXCLT.BEFOREREPORT(L_ORDERED)" />
- <dataStructure>
- <group name="G_XP_CLM_TRACKNG" source="Q1">
<element name="INVOICE_NUM" value="INVOICE_NUM" />
<element name="EMP_CLAIMING" value="EMP_CLAIMING" />
<element name="EXPENSE_STATUS" value="EXPENSE_STATUS" />
<element name="SUBMIT_DATE" value="SUBMIT_DATE" />
<element name="LAST_UPDATE" value="LAST_UPDATE" />
<element name="LP_ORDERED_BY" dataType="varchar2" value="SUBIXCLT.LP_ORDERED_BY" />
</group>
</dataStructure>
</dataTemplate>The PL SQL..
The PL SQL..
CREATE OR REPLACE PACKAGE Subixclt IS
L_ORDERED VARCHAR2(50);
RAISEDBY VARCHAR2(50);
STATUS VARCHAR2(50);
CLAIMANT VARCHAR2(50);
LP_ORDERED_BY VARCHAR2(50);
FUNCTION BEFOREREPORT(L_ORDERED IN VARCHAR2) RETURN VARCHAR2;
EXPENSE_DATE_FROM DATE;
EXPENSE_DATE_TO DATE;
--RETURN VARCHAR2;
END;
CREATE OR REPLACE PACKAGE BODY Subixclt IS
FUNCTION BEFOREREPORT(L_ORDERED IN VARCHAR2)RETURN VARCHAR2 IS
BEGIN
Fnd_File.PUT_LINE(Fnd_File.LOG,'L_ORDERED'||L_ORDERED);
DECLARE
LP_ORDERED_BY VARCHAR2(50);
L_ORDERED VARCHAR2(50);
RAISEDBY VARCHAR2(50);
STATUS VARCHAR2(50);
CLAIMANT VARCHAR2(100);
EXPENSE_DATE_FROM DATE;
EXPENSE_DATE_TO DATE;
BEGIN
IF (LP_ORDERED_BY='Expense Report Number') THEN
     LP_ORDERED_BY :='order by 1 asc;';
ELSIF (LP_ORDERED_BY='Person Claiming') THEN
     LP_ORDERED_BY :='order by 2 asc;';
ELSIF (LP_ORDERED_BY='Submit Date') THEN
LP_ORDERED_BY :='order by 4 asc;';
END IF;
RETURN(L_ORDERED);
--RETURN NULL;
END;
END;
END;Thanks for looking..
Steven
Edited by: Mr_Alkan on Jun 4, 2010 3:35 PM

One has to initialise a session first for use with Oracle Apps if you want to make it run as a concurrent job.
Any decleration within your package will not be recognised unless initialisation is sucessful.
Investigate the built-in packages:
FND_GLOBAL - for initialisation
FND_SUBMIT - for setting session relevant parameters
-- function returns true or false depending on whether the initialisation was sucessful or not
create or replace function is_Init_OK (p_User_Name       in varchar2
                                      ,p_Responsibility in varchar2
                                      ,p_Language        in varchar2) return boolean as
b_Set_NLS   boolean;
b_Set_Mode boolean;
r_ISet      fnd_Init := Get_Init_Set(p_User_Name, p_Responsibility);
begin
    -- 1
    fnd_global.apps_initialize(r_ISet.User_ID, r_ISet.Resp_ID, r_ISet.App_ID);
    -- 2
    b_Set_NLS := fnd_submit.set_nls_options(p_Language);
    -- 3
    b_Set_Mode := fnd_submit.set_mode (false);
    return (b_Set_Mode and b_Set_NLS and (    (r_ISet.Resp_ID is not null)
                                          and (r_ISet.User_ID is not null)
    exception
      when others then
        return false;
end is_Init_OK;
-- for example
declare
l_User_ID number = 'IMPORT_POST'; --- import post user
l_Resp    number = 'Import and Posting responsibility' -- import posting responsibility
l_Language varchar2(100) := 'AMERICAN';
b_Init boolean := false;
INIT_EXCEPTION exception;
begin
b_Init := is_Init_OK(l_User_ID, l_Resp, l_Language);
if (not b_Init) then
    raise INIT_EXCEPTION;
end if;
-- conitnue with your processing
exception
    when others then
      when INIT_EXECPTION then
      when others then
end;
/

Nsswitch doesn't run PADL's nss_ldap.so

Hi, all!
I've really broken my brain.
I've successfully compiled PADL's nss_ldap-253 with openldap-2.3.21 and openssl-0.9.7i. All linked static.
/etc/nsswitch.conf reads "passwd: files ldap". nss_ldap.so copied to /usr/lib/nss_ldap.so.1.
When I run `getent passwd` it displays content of /etc/passwd only and exits with code 0. truss shows that it opens /usr/lib/nss_ldap.so.1. But it doesn't run any functions, even nssldap_passwd_constr().
I've downloaded ready-to-use nss_ldap.so.1 from www.symas.com and it works fine. It frustrates and encourages me. I cannot understand what is wrong with my job?
I have Sun Fire V240, Solaris 9 9/05, GCC 3.4.2.
openssl-0.9.7i:
# ./config no-hw threads
# make ; make install
openldap-2.3.21:
# ./configure disable-ipv6 disable-slapd disable-slurpd disable-shared --without-cyrus-sasl \
--with-tls CPPFLAGS=-I/usr/local/ssl/include LDFLAGS=-L/usr/local/ssl/lib
# make depend ; make ; make install
nss_ldap-253:
# CPPFLAGS=-I/usr/local/ssl/include LDFLAGS=-L/usr/local/ssl/lib LIBS="-lssl -lcrypto" \
./configure with-ldap-dir=/usr/local with-ldap-lib=openldap --enable-rfc2307bis \
with-ldap-conf-file=/etc/ldap.conf with-ldap-secret-file=/etc/ldap.secret
# LDADD=-L/usr/local/ssl/lib make
# cp nss_ldap.so /usr/lib/nss_ldap.so.1
# ln -s /etc/ldap.conf /usr/local/etc/openldap/ldap.conf

GCC 3.4.2 was the matter. GCC 3.3.2 works fine.

Executable doesn't run in other computer

Hello all,
I have built a executable for one of our labview application and it works properly in this PC, the problem is the executable doesn't run in other computers, I've read the documentation sorting it out.
I checked:
-The OS is the same in both PC.
-I attached the file sepdrv in executable's folder (I am using serial communication).
-Labview Run Time Engine is instaled.
The executable doesn't take the default icon in other computers, does it...

Hi!
   It shouldn't be a licensing problem, and you don't have to have LabView installed on the PC in which your application will run, installer is meant for this! Otherwise, if you had LabView on target PC, it would have been enough to run the VI on the other PC (provided you've the same libraries....).
   I use NI Developer Suite 7.1, so in LabVIew 7.1, you have
     tools --> Build application or shared library ...
   Go to "installer settings", check "create installer", and in "advanced properties" check for what you need for your application to run.
   I only have an "evaluation version" of LV 8.5, so I cannot grant you that I can help you, but I'm doing a little check... please, let me know what LabView do you have!
graziano

Ntttcp doesn't run traffic on first command execution

Hi,
I noticed some weird behavior of ntttcp_x64.exe which sometimes doesn't run any traffic on the first time it's been executed.
Waiting for it to complete, shows that 0.000MB/s were transmitted. (no traffic was actually running)
Re-running right after that with the same command lines, works fine.
Have you ever encountered this behaviour?
I'm using current latest version (5.28) on Win2012R2 release version.
Thanks.

No application errors.
commands:
server: ntttcp_x64.exe -r -a 4 -t 10 -m 16,*,<IP>
client: ntttcp_x64.exe -s -a 4 -t 10 -m 16,*,<same IP as above>
here is a screenshot:
C:\>NTttcp_x64.exe -r -a 4 -t 10 -m 16,*,11.137.90.1
Copyright Version 5.28
Network activity progressing...
Thread Time(s) Throughput(KB/s) Avg B / Compl
====== ======= ================ =============
0 0.000 0.000 0.000
1 0.000 0.000 0.000
2 0.000 0.000 0.000
3 0.000 0.000 0.000
4 0.000 0.000 0.000
5 0.000 0.000 0.000
6 0.000 0.000 0.000
7 0.000 0.000 0.000
8 0.000 0.000 0.000
9 0.000 0.000 0.000
10 0.000 0.000 0.000
11 0.000 0.000 0.000
12 0.000 0.000 0.000
13 0.000 0.000 0.000
14 0.000 0.000 0.000
15 0.000 0.000 0.000
##### Totals: #####
Bytes(MEG) realtime(s) Avg Frame Size Throughput(MB/s)
================ =========== ============== ================
0.000000 10.013 0.000 0.000
Throughput(Buffers/s) Cycles/Byte Buffers
===================== =========== =============
0.000 0.000 0.000
DPCs(count/s) Pkts(num/DPC) Intr(count/s) Pkts(num/intr)
============= ============= =============== ==============
47.738 0.119 1817.238 0.003
Packets Sent Packets Received Retransmits Errors Avg. CPU %
============ ================ =========== ====== ==========
47 57 0 0 0.000
NOTE::Avg CPU% drops below 0% if test duration is too short

Page rendering process doesn't run after validation error

I have a page rendering process (On Load - After Regions) that needs to be run for my page to be rendered properly; however, it doesn't run when the page is rendered after a validation error. In debug mode, I see the following line:
"0.05: ......do not perform process because inline validation condition found."
Is this a bug? Validations are meant to prevent execution of On Submit processes, but is there a reason to also not run rendering processes?
I need to dynamically construct some javascript and insert it somewhere after a certain item on the page. Is there a workaround?
Thanks.
Rodney

Rodney,
Let me see if I understand your question:
1. A page is rendered
2. The page is submitted
3. A validation fires and fails
4. The page is re-rendered displaying the validation error message
5. Your on-load after regions process did not fire
You want to run a process in all cases; in the standard page load case (1) and in the re-load case (4).
You can do this by creating a region of type PL/SQL. You can give the region a null template so that it will not display any values. The region can be the last one displayed on the page; so that it will be run last.
You also asked if it is a bug that the on-load after regions process did not fire; as the debug message indicates this is proper. Here is an example that illustrates why you typically don't want to perform processes when rendering a page after it was posted causing a validation to fire.
Lets take the following example:
1. create a form on the emp table; assume a salary column called "SAL"
2. create a validation that says the salary must be numeric
3. edit a row of the EMP table
4. change the employee job from clerk to manager; and enter a "X" in the salary item
5. submit the page
6. the validation will fire; page processing will stop; and the page will be re-displayed
7. the process which fetches the rows will not fire; and the page will be re-displayed; the job item will display the change from "clerk" to "manager" and salary will still contain the invalid "X" value. If the process had fired it would have replaced the values in the form.
My recommendation is that you use regions for any processing that is UI releated. I hope this helps.
Mike

HDMI AV Digital doesn't run with IOS 6!!!!!

I have the AV Digital adapter for iPad and iPhone.
Now with the new IOS 6 it doesn't run!!
Why??? Will you resolve it?
Thank's :) :)

Apple, we need it resolved!

Phenom II x3 720 BE doesn`t run Cool`n Quiet

Similar Messages

Maybe you are looking for