Philips FTV HD and 15" MacBook Pro 2011 through HDMI.

Hello there,
I would like to connect my MacBook to my HD TV through HDMI but it doesn't seem to work as magically easy as most things Apple-related.
When plugging in the HDMI cable through the DisplayPort > HDMI adapter my MacBook screen goes blue for a moment, and recognizes the TV.
The TV screen then get the signal, but says 'Incompatible video signal'. I've used this screen for many years with my Windows laptop and video camera and had no problems using HDMI. For the record, I've also tried using VGA but I get the same result. Only when setting the display resolution all the way back to 640x480 (59.9Hz) the screen recognizes the signal. Note that 640x480 seems to be the only resolution that sends its signal at a refresh rate of 59.9Hz, which seems to be the key to getting my television to work.
Thanks in advance for helping,

Maybe that frequency is the only one supported by your HDTV?
A similar problem happened to me, but I fixed it by plugging the adaptor into the TV in a different order. ie, try plugging it into your TV, and then your MacBook, or the opposite.
Sorry I can't help much,
NWB1

Similar Messages

Can i connect my cintiq 12wx to my Macbook pro 2011 through the thunderbolt using the mini display port to vga adaptor?

I just bought my cintiq 12wx and was wonderding if i can connect it to my macbook pro 2011 through the thurderbolt using a mini displayport to vga adaptor? Please help!

Yes, it should work with a mini-displayport to VGA adapter. Since a 12wx also can take DVI you could use a mini-displayport to DVI adapter instead. Why go analog when you can keep it in digital!
I guess the usb is for the pen.

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

Macbook Pro 2011 charging behaving weird. Charges and stops repeatedly and takes very long. Help?

So a few weeks ago my MacBook Pro 2011 started having charging problems. I would use it normally. Then plug it in to charge anywhere between 5-20 percent like I've been doing for the past year that I've had it (since August 2011). Anyway, what happens now is that it charges but extremely slowly - at least 4 hours to fully charge as opposed to the 1 1/2 to 2 hours that it used to take. Also, it seems to be draining a lot quicker than it used to while only browsing the internet. Furthermore, while charging, the battery meter goes from the percent its charged to to "not charging" back and forth. What's going on? Is there a problem with my battery, my computer, or the magsafe charger? [please refer to the pictures below to get a better understanding of my problem - these pictures were taken over a 2 hour time period - a time period that usually is enough to charge my computer] - if you'll notice, in the first two pictures, the percent barely went up by 10 in a half hour period:
Here are my Mac power stats:
Battery Information:
Model Information:
Serial Number:-----------
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          406
Hardware Revision:          2
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          6156
Fully Charged:          Yes
Charging:          No
Full Charge Capacity (mAh):          6393
Health Information:
Cycle Count:          343
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -1607
Voltage (mV):          12182
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          25
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          15
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
PrioritizeNetworkReachabilityOverSleep:          0
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Battery Power:
System Sleep Timer (Minutes):          20
Disk Sleep Timer (Minutes):          0
Display Sleep Timer (Minutes):          15
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
Reduce Brightness:          Yes
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          No
Charging:          No
Does anyone have any idea what the problem may be?
Thank you,
macstr

try doing a SMC RESET and see if that sorts it out for you.
if doesn't work - better take it to Apple and have them look at it before something else goes wrong...
good luck - hope you get it sorted out..

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599

Will Remote Desktop allow me to access and use my Mac Pro 2009 from my MacBook Pro 2011?

Own a small business, have two locations, I need to use Windows via Parallels on my Mac Pro 2009, but I am forced to spend most of my time at the other location which has a MacBook Pro 2011. Will Remote Desktop allow me to use the MacBook Pro 2011 to access the Mac Pro and use Windows via Parallels?

If all you need is to be able to control another computer, then ARD would be overkill. If the systems have Mac OS X 10.5 or later you can use the Screen Sharing built into those versions of Mac OS X to control the system.
Another and perhaps easier option is to use a service such as LogMeIn or TeamViewer. Either option may be significantly easier than dealing with screen sharing or ARD.
You'll want to confirm that any solution you choose will work with Parallels, of course. I haven't tried remote control of a system to use Parallals, so there may be special considerations there. If you don't get useful comments here, you might try Parallels' forums.
Regards.

Is there a compatibility issue with the Current USB 3 external Hard drives and MacBook Pro 2011 (USB 2)?

I am currently having bad hangs with my 13" MacBook Pro (2011) which I book 2012 ad a New external Harddrive (WD My Passport Edge) which was given to me as a gift.
Friends of mine told me there is a compatibility issue between the USB 3 cord and the USB outlet of my MacBook Pro.
Although this shouldnt be the case as the box of the Hard drive I got said it was compatible.
I even downloaded the WD Drive Utilities and sometimes whenthe Harddrive is plugged in the Utilities doean't Open but just bleeps in the Applications Dock.
Before I used the Harddrive I read a lot from the WD Manual and went to their site and downloaded a firmware update so I really don't know what the problem is.
What I am afraid of is that I may lose some files if I place them in the external Harddrive.
Can anyone help me with this or should I be asking for a replacement harddrive?
This is my first experience with an external hard drive as I never used one before.
Thank you very much.

To be honest, I've had back luck with Western Digital drives and I avoid them at all costs. If I were you, I would return the WD drive and look at externals from OWC or MacMall (LaCie, even G-Tech).
That's just my personal opinion, mind you...
Clinton

My husband has a macbook pro (2011) and I have an iMac (intel core 2 duo) one apple id and cannot use facetime between us. I also have an iPhone 4

My husband has a macbook pro (2011) and I have an iMac (intel core 2 duo) and an iPhone 4 and iPad 2 but we share one apple id and are unable to use facetime with each other....help

You will have to make a second Apple ID.

Selling macbook Pro 2011. It came with Lion, I upgraded to mountain Lion and Mavericks. Can license be transfer to new owner? how?

selling macbook Pro 2011. It came with Lion, I upgraded to mountain Lion and Mavericks. Can license be transfer to new owner? how?

Good question now that Mavericks is free to all.
It used to be - and is probably still the case - that to comply with the license you should erase and re-install the OS that came pre-installed on the Mac when new. If there were restore disks they needed to be passed on with the Mac.
I'm happy to be corrected on this by someone who's more au fait with the legalese, but an upgraded OS is tied to an AppleID whereas the original OS is tied to the computer, not an AppleID.
My guess is, that if you launched the Recovery HD, erased the drive using Disk Utility and re-installed the OS, Lion would be installed.
Be interesting to see what others say.

Hello, I have a Macbook Pro 2011, and put an SSD on it. Yesterday i upgrade to Yosemite and sadly mi trim is not supported .... I really need (and demand) a solution to this, because like i see in the manual of the mac, Iam allowed to install a disk.

Hello, I have a Macbook Pro 2011, and put an SSD on it. Yesterday i upgrade to Yosemite and sadly mi trim is not supported .... I really need (and demand) a solution to this, because like i see in the manual of the mac, Iam allowed to install a disk.

Try a Safe Boot to clear the dyld_shared_cache (dynamic loader cache)
SafeBoot http://support.apple.com/kb/HT1564
Safe Boot, which automatically rebuilds this cache (among other things).

Macbook pro 2011 early cannot find right resolution for external display and keeps flickering

I have a macbook pro 2011 early running 10.9, and a LG FLATRON W2242T external screen. Also, I have a VGA to miniport from Apple and a VGA to HDMI, plus a HDMI to miniport(from Apple). By just connect with VGA to miniport to my MBP, it just flickers few times and stops detecting. But by connect VGA to HDMI converter and HDMI to miniport to my MBP, it keeps flickering, a non-stop flickering. The external screen always shows no signal. However, if I connect my MBP to my TV through HDMI to miniport, it works fine. But connecting the VGA port to my TV, it gets the same problem. I have tried clear my PRAM many times, and it gets the same result. Does anyone have the same problem? Thanks

Macbook Pro 15" Early 2011 external display won't work as it used while Snow Leopard, I hate you Lion so far. I cannot even Go Back!
Did you bother to backup or clone your SL installation before dumping it?

Where in NYC can I buy a new Macbook Pro 2011 unibody trackpad and the tools i need to replace it myself?

I am going to NYC in a week and I'm wondering if there is a store where I can buy a new trackpad for my Macbook Pro 2011 unibody. I would also like to buy the tools i need to replace it myself. I can't find anything when I search the interwebz.

The problem is that when the machine is closed, it goes to sleep, and in sleep mode, all that goes on is that a bare trickle of power is used to keep the contents of RAM alive. Networking is definitely not active while asleep.
Now, regarding ds store's solution, that's a fairly bad idea. If the machine is just sitting at your desk, you don't need to close it, or if you feel a need to close it you can use Kappy's solution. (Although, it should be noted that apps like InsomniaX and Caffeine do not, as far as I know, keep a machine awake when the lid is shut.) If you're worried about passersby seeing your screen, just activate the screen saver instead. You could even require a password to dismiss the screen saver for added security.
On the other hand, if the machine is being transported, keeping the lid open and the machine running is not a good idea. The sudden motion sensor ought to protect your hard drive against damage caused by moving the machine around... if it's working properly, and I'd rather not depend on an "if" to prevent hardware damage to the machine. Plus, if it's in a bag and you've forced it to stay running, it could overheat due to lack of ventillation.
So, long story short: if you're transporting it, close it and deal with logging back in to the network, and if it's on your desk, don't bother closing it.

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.

If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

MacBook Pro 2011- Allowed updates to install for iTunes software and Microsoft office (I think). After rebooting, computer wouldn't progress past grey apple screen with loading circle.

I have a MacBook Pro 2011. I allowed updates to install for iTunes software and Microsoft office (I think). After rebooting, computer wouldn't progress past grey apple screen with loading circle. No progression bar ever appeared. It just sits and spins. I tried rebooting with Command + Option + R + P and hearing the chime twice....this did not work.
I also tried Command +Option+R which took me to internet recovery. From there, I chose reinstall Mac OS X Lion 10.7 but it says my hard drive is locked so I wasnt able to select it. What do I do???? Help! I don't want to lose my files and it doesnt appear that I've used Time Machine Back Up.

macbookpro2011ISU wrote:
I also tried Command +Option+R which took me to internet recovery. From there, I chose reinstall Mac OS X Lion 10.7 but it says my hard drive is locked so I wasnt able to select it.
I you upgraded to OS X 10.8, then use RecoveryHD by holding Command R at boot time (no option) and reinstall OS X over itself that way so your installing Mountain Lion.
Also Disk Uility can be used to Repair the Macintosh HD parttion.
Also you can use that RecoveryHD to format and install OS X onto a external drive, then option/alt key boot from it and access your files on the non-booting internal drive before erasing, reformatting and reinstalling OS X fresh.
Create a data recovery/undelete external boot drive
Most commonly used backup methods
..Step by Step to fix your Mac

I have a MacBook pro 2011. And I need help

hi . I have a MacBook pro 2011. And I recorded some videos on aSony camcorder and the camcorder is not comparable with iMovie. And I only nowhow to use iMovie and nothing else. So is there any movie-transferring downloadI can use so I can use iMovie?

Have you checked all of the iMovie compatibility articles on Apple Support?
Apple may not have tested your camera with the current release of iMovie, but it might have done so in prior versions (8 [09], 7 [08], 6 [06], 5 [05], and 4 [04])
If your camera outputs MPEG-2, there's a solid chance that iMovie 9 will properly read its data, as has happened in the case of one 2007 Panasonic SDR-H18 that was not listed past iMovie 6 (this is my own grandmother's camera, which was only supposed to work with some cheap-as-dirt compositor, from a no-name in Japan that pushed its wares also to Fujifilm, JVC, and Olympus). In '09 my grandmother and I went out for Snow Leopard. I installed it without delay, but the Panasonic compositor would frequently crash while previewing a clip post-upgrade. After getting a big runaround from the phone techs, one of them dropped the iMovie hint. A bit more digging through the Apple boards (right here) pretty much sealed things up. The camera worked then, and still works today.
As to other formats, I don't know. Best I can suggest is to give your camera a go at your new Mac (or the other way around).
Nate

Philips FTV HD and 15" MacBook Pro 2011 through HDMI.

Similar Messages

Maybe you are looking for