Philips LCD TV with Ethernet does it work with TC

Philips have on some of their top models an Ethernet point in the back of the TV for connection to the network but has anyone got it set up with an airport unit? and if so can you please tell me how to make it work.
thank you in advance

I don't have this TV, but I imagine it should be easy. Just go into the TV's network setup screen, and make sure the Ethernet is set to DHCP mode. And then get a CAT5 cable and connect from the TV to the LAN port on the TC.

Similar Messages

If I use my own domain with mobileme, does it work with google search?

I've noticed something, I used to only access my page with web.me.com/NAME and it shows up relatively at the top of of the google search results when I search for NAME or things related to me.
Since then I have started using my own domain which I have bought from godaddy.com. Now I'm not sure if I am doing it right, but at godaddy, I setup this forward to web.me.com/NAME as a 301 site move. When I type in my own domain, it gets redirected ok but the problem is it never shows up in google. It doesn't show up if i search for "mydomainname" or "mydomainname.com" or anything.
Any ideas? Does forwarding (cloak) does not work with search engines?

You are referring to IP addresses and Nameservers. You DON'T need these if you are using CNAME forwarding. They are not required.
Normally, when you set up CNAME forwarding you would delete the A record and set-up CNAME in its place. At least this is what I had to do when I used CNAME forwarding with MobileMe. I went to my DNS settings and there were A records against both @ and www. I had to delete both of these and set up new records, one for @ with CNAME that pointed to web.me.com and then the other for www, CNAME that also pointed to web.me.com.
What you have done sounds right, in that your domain name is pointing to web.me.com that is where your new website is with iWeb/MobileMe.
I think your problem is due to your old website that you created with Microsoft Office Live. You seem to have used the same domain name with this? If so, have you deleted your old site that you created with Microsoft Office Live?
I don't quite know how Microsoft Office Live works, but I know that you can create a site with them quite quickly using their templates and colour themes, although it is limited as to what you can do and probably is not as good as iWeb. Did you register the domain name through them and then publish? How do you publish to their server? You need to remove this site totally from the server so that your domain name will just be linked to your iWeb/MobileMe site.
I think the problem lies with your old site and Microsoft Office Live rather than your CNAME settings at GoDaddy. Investigate this first.

Weblogic server 5.1.0 with sp8 does not work with LDAP (Netscape Directory Server 4.12)

I have weblogic server 5.1.0 with the sp8 running on Windows NT server 4.0.
The weblogic server is configured to use LDAP realm (Netscape directory
server 4.12).
When I try to run weblogic server and I am getting the following errors:
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.ExceptionInInitialize
or: weblogic.security.ldaprealm.LDAPRealmException: cannot connect to ldapse
without a principal to authenticate as
at weblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
.java, Compiled Code)
at weblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
at weblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.ExceptionInInitializerError: weblogic.security.ldaprealm.LDAPRealm
ption: cannot connect to ldapserver without a principal to authenticate as
at weblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
.java, Compiled Code)
at weblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
at weblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
And here is the my ldaprealm.properties file
netscape.server.host=localhost
netscape.server.port=389
netscape.server.ssl=false
netscape.server.principal=uid=admin, ou=Administrators,
ou=TopologyManagement, o=NetscapeRoot
netscape.server.credential=password
netscape.user.dn=ou=People, o=towers.com
netscape.user.filter=(&(uid=%u)(objectclass=person))
netscape.group.dn=ou=Groups, o=towers.com
netscape.group.filter=(&(cn=%g)(objectclass=groupofuniquenames))
netscape.membership.filter=(&(uniquemember=%M)(objectclass=groupofuniquename
s))
By looking at the error message, it seems like the "server.principal" and
"server.credential" info is not correct.
But I was able to use the same Netscape Directory server with Welogic 5.1.0
with sp4, although the ldaprealm.properties file has somewhat different
format.
Did anyone have similar problems with sp8?
Thanks in advance for any suggestions.

BEA support just gave me the solution.
They told me to uncomment out the line
server.alias=netscape
in the ldaprealm.properties file
And I am able to start weblogic with my NIS
Thanks
"Enrique" <[email protected]> wrote in message
news:[email protected]...
>
Hi,
Have you try to remove the "system" user on the LDAP server?
Regards.
"Honghai Zhang" <[email protected]> wrote:
I have weblogic server 5.1.0 with the sp8 running on Windows NT server
4.0.
The weblogic server is configured to use LDAP realm (Netscape directory
server 4.12).
When I try to run weblogic server and I am getting the following errors:***************************************************************************
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException:
java.lang.ExceptionInInitialize
or: weblogic.security.ldaprealm.LDAPRealmException: cannot connect toldapse
without a principal to authenticate as
atweblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
..java, Compiled Code)
atweblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
atweblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.ExceptionInInitializerError:weblogic.security.ldaprealm.LDAPRealm
ption: cannot connect to ldapserver without a principal to authenticate
as
atweblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
..java, Compiled Code)
atweblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
atweblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)***************************************************************************
And here is the my ldaprealm.properties file////////////////////////////////////////////////////////////////////////////
netscape.server.host=localhost
netscape.server.port=389
netscape.server.ssl=false
netscape.server.principal=uid=admin, ou=Administrators,
ou=TopologyManagement, o=NetscapeRoot
netscape.server.credential=password
netscape.user.dn=ou=People, o=towers.com
netscape.user.filter=(&(uid=%u)(objectclass=person))
netscape.group.dn=ou=Groups, o=towers.com
netscape.group.filter=(&(cn=%g)(objectclass=groupofuniquenames))
netscape.membership.filter=(&(uniquemember=%M)(objectclass=groupofuniquename
s))////////////////////////////////////////////////////////////////////////////
By looking at the error message, it seems like the "server.principal" and
"server.credential" info is not correct.
But I was able to use the same Netscape Directory server with Welogic5.1.0
with sp4, although the ldaprealm.properties file has somewhat different
format.
Did anyone have similar problems with sp8?
Thanks in advance for any suggestions.

Auto-covert to 128aac works with shuffle - does it work with Nano also?

hi!
I own a shuffle alu, now I am thinking to buy a Nano. The problem is, that the apple care hotline could not answer the simple question:
Is the auto-covert to 128 AAC format aviable also when a Nano or a big iPod is connected to the mac?
thank you for every helpfull answer!
(please no "I think it should work" - answers!)
happy new year
hans from Austria
Mac OS X (10.4.8)

thank you very much!!!!
your quick reply was realy helpfull!!!
i just wonder why the apple support hotline could not answer this simple question?

10g JSpell PJC does not work with latest JSpell version

Looks like latest (10g) forms demo - Spell check with JSpell does not work with the latest version of the JSpell software (does not look like this demo been changed from the previous version).
Does anybody has a success running this or have any suggestions how to integrate it together?
Thanks for any input.

We're in contact with JSpell on this issue and will revise the integration code as soon as we recieve the relevant updates from them.

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

Deskjet D4260 does not work with an ethernet printer server

I am attempting to attach a Deskjet D4260 printer to a home ethernet network using a StarTech PM1115U printer server. The printer has been connected to the network through a desktop computer, and worked perfectly. The printer server will also work with a different printer (Canon i550). However, it doesn't work with the D4260. The server's port will not go online, and it does not appear to recognize the printer.
This occurs regardless of OS (Windows XP, VIsta, 7, and 8 preview all don't work).
StarTech says there is no incompatibility issue with the server and host-based LIDL printers in general or the D4260 in particular. Does anyone know of any issues, or how to get the D4260 to work with this printer server?

Yes, that is how the instructions with the server tell you to install it. The server is connected to the network via ethernet cable and the printer to the server via USB. The server's instructions (as well as those given to me from StarTech support) say to install the printer as a local printer using a TCP/IP port using the server's IP address, which must be on the same subnet as the computer you are installing the printer on. All this I have done. There are a number of settings for the port. It can be raw or LPR and there are other options. I have attached it as instructed, and I have tried both raw and LPR, and tried various other settings. I was able to install a Canon i550 on the server with no difficulties. I was able to print to the printer, and the server, when I accessed it using either StarTech's server management software or a browser pointed to the IP address, showed the server's port on line and identified correctly the printer attached to it. When I attach the D4260, however, it shows the port off line and does not identify the printer. I got this server as a replacement for one that I bought without knowing that, according to its own documentation, it does not work with LIDL orinters. StarTech did not have any such warning, and the StarTech support people said that there should be no problem with a LIDL printer. They told me to consult HP support (to which this forum is the closest thing I can find). It looks to me as if either there is something about the printer that needs to be reset, or the server does not work with this printer. So far changing the driver does something, but not enough to print.

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

USB ethernet does not work in left USB port

My USB ethernet adapter does not work in the left USB port on my MacBook Air, but it works in the right side. Other devices, like my mouse, work fine in both ports.
Could I have a faulty left-side port with too little power for the ethernet adapter, or is this normal for MacBook Air?

I have the same problem.
USB Ethernet doesn't work with the left USB port. It does work with the right USB port, and any other USB device works with the left USB port on my macbook air
Any solution to this problem?

APPLE TV DOES NOT WORK WITH NETFLIX

APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

It started working.....!!!!! (It seems someone back there is listening)
I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
TIPS:
I didn´t change any language or video quality configuration (scared to do so)
I changed to ethernet (cable) instead of wireless
My internet plan is 6 Megabytes (it was the same while it wasn't working)
good luck!!

" help me please" I have Windows 7 installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me

" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]

Someone in another section answered this. Thanks.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Flash player does not work with Ie or Firefox with win 8.1?

Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......

Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

ITunes 12.1.1 does NOT work with Windows - Fix??

Hi everyone,
I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly. Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components. It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version. I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

Philips LCD TV with Ethernet does it work with TC

Similar Messages

Maybe you are looking for