Philips RC 1445302 Remote is it available as a replacement

Hi,
I ordered a new remote to replace my dead Philips RC 1445302 Remote.
I received a Verizon P265 Remote which doesn't have the capability to work my receiver which is a showstopper as my sounds comes through it for my fios STB.
Are the Philips RC 1445302 Remotes still available?

Verizon doesn't sell them anymore.
You can find lots of them on eBay.
Or go with another universal remote brand.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

  • I am using forms Central from my MUSE site. Since Forms Central is closing up shop, What other forms service is available as a replacement?

    I am using forms Central from my MUSE site. Since Forms Central is closing up shop, What other forms service is available as a replacement?

    janicek63007226 They do not have pricing listed on the site. What are the costs?  THANK YOU !!!!

  • FIOS Remote app and available space on DVR

    On the newest version of the iphone FIO Remote DVR app I am no longer able to find the amount of space I have used/have available on the DVR.  Can this still be found on the new version?  If this feature has in fact been removed I will take your recommendation and contribute to the Idea Exchange.  Is there in fact a support channel for the app via phone, email or chat?
    Solved!
    Go to Solution.

    Select menu (upper left)
    Settings
    DVR Info.

  • Suddenly Airtunes Remote Speakers Not Available

    I've been using Airtunes for quite a long time with a single problem. Now suddenly I was playing music using iTunes v7.1.1 and the playback stopped. Even so I was able to get to web pages and send and receive email. I noticed that my remote speakers showed at the bottom right of the iTunes window but they were italicized- which means they are unavailable. I then tried connecting to my base station with a wireless connection and it came back. Went back to my wired connection and no remote speakers! OK, so I thought it was the router that the base station and my Mac is connected to so I power-cycled the router and I got the remote speakers back. Started playing music again then a while later (a couple of hours) same thing happened. Power-Cycling the router always brought it back but I thought my router might be failing so I installed a brand new one. I was surprised when later iTunes stopped playing to my remote speakers again. Although I had no need before, I mapped UDP port 5353 to my Airport Express and started playing music. After a while the same thing happened- AirTunes just stopped playing. Power-cycling the router always brings it back, temporarily. So it wasn't the port, and it can't be the router. Anyone have an idea what may be going on? I've see that PC users are having this issue and turning off Bonjour fixes it for them, but I'm using a Mac (PPC) running OS 10.4.9. I did try turning off IPv6 but that didn't help- turned it back on. I'm now thinking it's iTunes 7.1.1. I'll try downgrading to an earlier version to see if that resolves the issue. Anyone have any other ideas?

    Until today I had exactly the same problem.
    Have you changed or upgraded your anti-virus recently? I have a PowerBookPro and a Dell XP PC on the same wireless network, Netgear main modem/router with 3 Airport Expresses each connected to amps/speakers. Suddenly recently the Mac could still see remote speakers via itunes, but the PC could not.
    Turned out it was my upgraded antivirus, upgraded from eset nod32 to eset smart security on default settings. The default eset personal firewall settings are "automatic mode" where the sofware monitors all network traffic and imposes its own rules. I changed this to "interactive mode" where any traffic came up with a dialogue box to ask my permission.
    Lo and behold, itunes had been asking permission to acces the airports, but been auto-denied. New setting allowed me to give permission and sure enough the speakers now appear in itunes.
    Lesson: try fiddling around with settings of anti-virus monitoring software: it worked for me.
    Hope this helps.

  • Is remote desktop assistance available in AppleCare Program?

    Hi
    Those days that I was using windows, if I had a problem that couldn't solve it, I just contacted a support company ( not related to Microsoft ) and they asked me to turn on Teamviewer and give them the password. An expert got into my system and made anything needed ( also they charged me for that !! ). I know that was a security risk , but for a lazy person like me it was a gift sent from God !
    Now I have turned into Mac and those guys say they can only give support for Windows.
    As I was really pleased by the convenience of that program, before buying the AppleCare I want to know if this service includes remote desktop assistance or not .
    Thanks

    No it doesn't. Youll need to look for a thrid party solution (again) if you want this.
    regards

  • SBS 2011 Remote Website Not Available in IE

    I can't get to my /remote website from outside my LAN using IE. I can get to it from firefox and am able to log in with no problems but am not able to RDP into any resources on my domain.
    I am able to log into /RDWeb and /OWA using IE from outside our network...
    I thought the issue might have been security settings in IE so I've pointed my IE to another client's SBS 2011 Server and am able to open the site. Does anyone now what I can do to troubleshoot this issue?
    Thanks,
    Dave

    Hello Larry, I never fail to post in the wrong thread... Thanks for your reply.
    I did not add a DNS entry for remote.mydomain.com on our internet DNS. I am accessing the site the same way I get to our /owa site. https://mail.mydomain.com/remote
    When browsing to the URL in IE nothing comes up, it acts as if the site does not exist. The odd part was that I can use Firefox to browse to the site, log in, and view resources on our domain. RDP connections to any PC or Server in my domain always fails
    in Firefox though.
    I've been trying to log in my site for days and got the same result every time using IE. I tried it one more time last night so I could report exactly what IE Showed but I was finally able to log in using IE...
    Last night before IE connected to the /remote site I went into the session state of the /Remote site in IIS and changed it from In Process to Server State... I did this just to see if I could get IE to behave in a different manner than the blank page...
    RWA threw errors when trying to log in from outside the network using IE, I changed it back to In Process and at that point IE allowed me to log in and I was able to use RDP to log into the SBS2011 Server.
    I thought I could come back to it this morning and test more connections but now I can log into /Remote using IE but am not able to RDP into any resource in the domain...
    I'm at a complete loss so any help you or anyone else could offer is greatly appreciated.
    Regards,
    Dave

  • ANY VNC or Remote Desktop apps available for Nokia...

    As subject.
    Could really use either or preferably both

    This may be a very basic answer which you may have already checked
    under network options is the send all traffic over VPN connection ticked
    thats the only thing i can think off atm

  • Remote Object only Available in RDS?

    I am trying to use my colfusion login to login to godaddy
    using mysql and its not connecting.. i am using remoteobject in
    mxml code.
    Is this possible? or do i HAVE to use RDS?
    ANY help is much appreciated.

    No it doesn't. Youll need to look for a thrid party solution (again) if you want this.
    regards

  • Programmin​g Remote for Digital Lifestyles brand TV

    I have a "Digital Lifestyles" brand TV and since it's such a new proudct, there is no code for it in the User's Manual. When I followed the directions for "What if none of the codes worked", it didn't find a code. How can I set my remote to control the TV also? I have a  Philips RC 1445302 Remote.

    actually you've already done everything that you can. If you followed the "what if none of the codes worked" steps, you have gone through every code that the remote knows. If that didnt work, your out of luck on the verizon remote.
    Now what you could do is, find another universal remote that will work your tv, and then program it to work the verizon stb. Most universal remotes can be programmed to Motorola STB's. You may not get all the special features (ie, vod and widget buttons) but you should be able to get the channel controls and volume
    Message Edited by spacedebris on 08-03-2009 01:02 PM
    ====================================================================================
    Error exists between keyboard and chair.

  • Curtis TV Remote Programming

    Has anyone sucessfully pregrammed a FIOS P265 remote to a Curtis TV Medel #LED2400A?

    Verizon P265 Remote
    Instructions and Help for the Verizon P265 Remote
    User Guide
    Set up your Remote
    Find remote codes
    No remote code listed for my TV
    Existing remote code for my TV doesn't work
    Troubleshooting your Remote
    Need more guided help?  [Guide Me] 
    Philips RC 1445302 Remote
    Instructions and Help for the Philips RC 1445302 Remote
    User Guide
    Remote Control at a Glance 
    Set up your Remote
    Find remote codes
    No remote code listed for my device
    Existing remote codes don't work
    Set up your remote to turn on/off multiple devices
    Troubleshooting your Remote
    Need more guided help?  [Guide Me] 
    Try the codes that come from Verizon,  they may work better than the one that came from the manufacturer.  their codes are usually for their tv's unless you specifically told them you were using a VZ fios remote, and they looked up the code for that remote. 
    The Remotes are Garunteed to control the Cable Boxes, however your TV may not be compatible with the VZ remote control.
     You must use the remote that came with your TV or component OR if you absolutely must have only one remote control, then you can purchase a third party Universal remote control that can control the Verizon Cable box

  • Keynote Remote not available from South African Mac App Store

    Hi
    I Just bought Keynote from the Mac App Store and discovered that the sister app Keynote Remote is not available in the South African Mac App Store. Not only is this app missing but there is no games category and there are other very useful apps which aren't listed. This means no Fight Control or Simon Says
    Any way this can be rectified?

    Hey Cybeo,
    You are correct! There isn't a games section on the South African Mac App Store. Strange.
    I would drop a note to Apple at http://www.apple.com/feedback/ unless there is a reason someone else might know of?
    Is the Keynote Remote application not showing up for you in the iTunes App store under South African?
    Direct Link http://itunes.apple.com/za/app/keynote-remote/id300719251?mt=8
    Keep in mind that the stores while they share the same AppleID are different for iOS devices like iPhones/iPads and iPod Touch then it is for your Macintosh Computer.
    I hope that helps!

  • Remote features available with Playbook 2.0 not working with Bold 9700 (running OS6)

    The new remote control features available with Playbook OS2.0 do not appear to work with my Bold 9700 (running OS6). Am I SOL with this Blackberry model in terms of using the new features on the Playbook? Don't really want to buy a new smartphone right now.

    do you have bridge 2.0 installed on your smartphone?
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • I am a newer about LabVIEW.How can I realize a remote control in a Web brower.

    "To transform your application into a remote laboratory, make sure the VI that you want to publish is loaded into LabVIEW memory. Next, select the Web Publishing Tool option from the Tools menu. This window is the main window for interactively creating and publishing your remote laboratory
    The Web publishing tool will automatically load in the Document Title and VI Name text fields. As the sample image in Figure 6 illustrates, the Document Title, Text 1, and Text 2 are all text fields that you can use to customize the Web page created with the publishing tool.
    The second step necessary to enable a remote laboratory is to select the Start Web Server button. When pressed, this button activates the built-in LabVIEW Web server, which will publish and control your front panel images from the Internet.
    Once the Web server is activated, the actual HTML document needs to be created and saved so it can be accessed remotely. Clicking on Save to Disk places an HTML file called Document Title.htm into the LabVIEW file folder called WWW by default. Saving your Remote Panels HTML documents into this folder will ensure that the LabVIEW Web server can find them. Either keep the default name, or assign a new name and save the file. Once saved, a new panel entitled Document URL pops up with a message box containing the URL address of your enabled LabVIEW application.
    Click on OK in the Document URL window and then click on Done in the Web Publishing Tool window. Your lab is now ready for remote visitors
    Required Software
    To operate a LabVIEW program using remote panels, it is necessary to have the free LabVIEW run-time engine installed on the client computer. When a remote viewer logs onto the lab with the appropriate URL address, the LabVIEW front panel will appear in the browser, or reroute the user to install the run-time engine from the National Instruments Web site.
    Application Control
    Once connected to the remote laboratory, the client connection will automatically be in a monitor state. If another client is controlling the remote laboratory, the user will be able to monitor the actions of the controlling client. To request control of the program, right click on the front panel and select Request Control. Once selected, one of two possible messages will appear. Either the user will be granted control (Control Granted), or the user will see a message indicating that control is currently granted to another user (Waiting for control: Either the server is locked or another client has control). If another client has control, the controlling client will be notified that control time has now become limited. Once the timeout occurs or the controlling client has released control, application control is automatically switched to the requesting client (Control Granted). Once the user has been granted control, all icons and controls will become active and running the LabVIEW application is exactly like running the application from the local environment.
    Releasing Control
    When the remote viewer either moves on to a different URL address or relinquishes control by right clicking and selecting (Release Control), or when the remote laboratory times out, the remote laboratory is available to the next visitor."
    The above is what I read from a text of ni.com,
    but I can not obtain the result.
    Thanks a lot!
    ^^

    Hi
    I don't see which LV version you are using. It's important to know, that you need the FDS or PDS package of LV 6.1 to work with remote control. This feature is not supported in the LV base package of LV 6.1.
    If you have LV 6.1 FDS or PDS, which of the described steps are not working?
    Luca P.
    Regards,
    Luca

  • Can I use my imac remote for Apple tv 2nd generation

    Apple tv 2nd generation is not working. HAve tried all the resets and a new battery but to no avail. Just wondered if I can use my remote from my iMac as a replacment.

    Yes, Any apple remote should work.

  • HT4352 I lost my remote for apple tv and would like to use my ipad mini as the remote.  Is this possible?

    I am not sure if I can program or whatever my ipad mini to use as the renote for our apple tv.  We cannot find the remote and I thought I read somewhere tht one can set up their ipad device to act as a remote for apple tv.  I could be wrong.  Maybe it means sharing some other thisngs between computers but not usinghte ipad as a remote for apple tv.  Any information abou this mater would be greatly appreciated!
    Thanks,
    scima

    Only if you've already setup home-sharing on ATV and both are on the same network.
    The remote app is available from the App Store

Maybe you are looking for