Philips VOIP 855 - SkypeOut call connects but not ringing on other side

I've got a Philips VOIP 855 and Skype worldwide subscription. It has been working fine for a few years but since last week I have been unable to make SkypeOut calls. I have tried:- Replacing the base unit, charging unit, handset and cables with a second set I have.- Disabling the firewall on internet router- Powering off and on- Calling in via the landline works OK- Calling out via the landline works OK- Calling in via Skype-to-Skype works OK- Calling out via Skype-to-Skype works OK- Calling out via Skype-to-landline/mobile rarely works. Sometimes it connects as usual (1/10 times). The other 9/10 times, the call appears to connect and I can hear the ringing tone but then it disconnects itself with beep-beep-beep sound after about 20-30 seconds. When I ring the other side with my mobile they say their phone never rang. I've confirmed this when I call my own mobile. I can't figure out why it works on occassions but not the majority of the time. Of course, Skype status says online when I make the call and when I view my account history on www.skype.com, it lists all my dialed numbers with a duration of 00:00:00. I've tested the Skype account from my mobile and it appears to work fine. Anyone have any ideas? 

Hello,
We have asked our PSTN team to investigate further.
Could you please specify from what number to what S2G number you are calling?
Thanks.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

  • Got a new LG in Anchorage and was told Glennallen, AK is in a service area.  Got home and all I get is Message 41, Roaming. Can make calls with WiFi connection but not on the road. Any idea whats going on?

    Got a new LG in Anchorage and was told Glennallen, AK is in a service area.  Got home and all I get is Message 41, Roaming.
    I can make calls with WiFi connection but not on the road. Any idea whats going on?

        Oh no! I'm sorry to hear you had problems in the are you're in AkJohnDye. I checked your coverage and I do see we have an extended 4G coverage. This means you're able to use your phone but it needs to be activated in a 4G LTE Verizon Wireless coverage zone. I apologize.
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • Skype DECT telephone (e.g. Philips VOIP 855) and n...

    Hi,
    I can't find any info on this - maybe someone knows: Can I continue to use my Skype-account on the computer (e.g. for instant messaging) even though I use a telephone such as the Philips VOIP 855? Or do I need a separate account just for the hardware telephone? Obviously I won't make calls at the same time through the computer and through the telephone...
    Thanks for any  answer to this (obvious?) question.

    Yes, you can run them both on your phone and computer/mobile no problem.

  • On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Email account.  What is causing this and what do we need to do to resolve it?

    On 3G we cannot send  Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
    We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine.  We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
    Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this. 

    Contact whomever supports the email account and get the correct Outgoing email server settings from them.

  • My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
    Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

  • ITunes crashes on exit when iPod is connected, but not otherwise?

    I had this problem ever since I installed iTunes 7...
    It occoured as soon as I installed the new verison while still using my old 4gb first gen. iPod nano.
    Now I just recently bought a new second generation nano, and still have the same problem.
    And the issue is, Whenever I close iTunes while my iPod is connected (but not being updated), i get the message that "iTunes.exe has preformed an illegal operation and will be closed".
    Though I just noticed that if I disconnect the iPod before closing itunes, it closes fine and normally.
    I Have tried to solve it by following toturials for uninstalling both just iTunes, and iTunes + QuickTime at the same time, and preform separate installations after cleaning the temp. folder and restarting. None of it has helped me solve the problem
    -And I have lived with ifor a while, but it is getting really annoying if I am sititng on my computer and jsut close iTunes, without disonnecting my iPod, to run another program using sound or a lot of system resources. And thne each time get the error-message that "iTunes preformed an illegal operation and..."
    Anytihng that can be done? -I run NO plugins for the record, and the iPod is connected by USB cable (seeing it is a Nano)
    Anything anyne can suggest that I'd do, then please tell.
    -Or if anyone need to know more then please ask.
    Bigtower III Pentium 4   Windows XP Pro   [4gb Ipod nano. 2nd. gen.][Itunes 7.0.2.16]
    Bigtower III Pentium 4   Windows XP Pro  

    Hi, Im sorry just to add on to this discussion but I couldnt figure out how to start a new discussion and I am going mad! I have a new ipod because my last one was stolen and I have plugged it in and my PC wont recognise it. I think that is because my old ipod is the only one my computer will accept. Can that be right? It said the hardware device had been detected and then it said that it was troubled and it simply did not work. Now it is plugged in and not at all recognised in my computer anywhere. Can any one help this clueless girl who simply wants to listen to music again?
    Thank you.

  • Cisco vpn 5.0.07.0440-k9 connected but not access remote network from Windows 8.1 pro

    I am using Cisco vpn 5.0.07.0440-k9 and Cisco vpn 5.0.07.0290-k9 both version on our windows 8.1 pro laptop.
    VPN successfully connected but not access remote network and not getting ping. 
    But when i am try through wifi then vpn good work.
    Please help me as soon as possible.
    Thanks
    Sanjib

    Hello Karthik,
    I am using "MTS usb wifi" device and connect vpn through wifi Its working good the same win8.1 pro. But when i am try to connect VPN through LAN/Wired or USB modem (Like: Vodafone,MTS and others) its not working.
    I am using Easy vpn on Cisco RV325 router in our office. Same VPN client is very good working in Windows 7 SP1 and Windows XP SP3.
    Thanks
    Sanjib

  • How to connect iphone 5 with ipad 2 using Bluetooth? When  I activate Bluetooth both devices search but not listing each other to pair or connect.

    How to connect iphone 5 with ipad 2 using Bluetooth? When  I activate Bluetooth both devices search but not listing each other to pair or connect.

    You can use Photo Transfer App to transfer photos from iPhone to iPad or vice versa using Bluetooth or WiFi
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3dd129795daebebc4b8 741b057f5f70d.jpg
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3af5c541040e15e3f6b 3356e4c55cbfc.jpg

  • My 5th gen nano will not sync win 7 .says connected but not show in itunes. driver is updated ,working properly ....help

    my 5th gen nano ,has updated driver ,working properly. ipod connected but not showing in itunes ?

    By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

  • Time Machine works on Ethernet connection but not wireless

    Hi,
    This weekend I setup time machine to work with a NAS drive connected to my wireless router. If I connect my macbook to the router directly via an ethernet cable, and start a backup, it works fine. If I however try to start a backup when only on wireless it always fails. Here's what messages I'm getting:
    Starting standard backup
    Attempting to mount network destination using URL: afp://;AUTH=No%20User%20Authent@Backup%20to%20Iomega-0cd217.afpovertcp.tcp.local/backups
    NetAuthConnectToServerSync failed with error: 64 for url: afp://;AUTH=No%20User%20Authent@Backup%20to%20Iomega-0cd217.afpovertcp.tcp.local/backups
    Attempting to mount network destination using URL: afp://;AUTH=No%20User%[email protected]/backups
    Mounted network destination using URL: afp://;AUTH=No%20User%[email protected]/backups
    Warning: Destination /Volumes/backups does not support TM Lock Stealing
    Warning: Destination /Volumes/backups does not support Server Reply Cache
    QUICKCHECK ONLY; FILESYSTEM CLEAN
    Disk image /Volumes/backups/Garys-MacBook-Pro_xxxxxxxxxxxx.sparsebundle mounted at: /Volumes/MAC Backups
    Backing up to: /Volumes/MAC Backups/Backups.backupdb
    Stopping backupd to allow ejection of backup destination disk!
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/MAC Backups/Backups.backupdb/Gary's MacBook Pro/2011-01-15-042811
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/MAC Backups/Backups.backupdb/Gary's MacBook Pro/2011-01-15-042811
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/MAC Backups/Backups.backupdb/Gary's MacBook Pro/2011-01-15-171318.inProgress
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/MAC Backups/Backups.backupdb/Gary’s MacBook Pro/2011-01-15-171318.inProgress
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/MAC Backups/Backups.backupdb/Gary’s MacBook Pro/2011-01-15-042811
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/MAC Backups/Backups.backupdb/Gary’s MacBook Pro/2011-01-15-042811
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/MAC Backups/Backups.backupdb/Gary’s MacBook Pro/2011-01-15-171318.inProgress
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/MAC Backups/Backups.backupdb/Gary’s MacBook Pro/2011-01-15-171318.inProgress
    Backup canceled.
    [SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
    Failed to eject volume (null) (FSVolumeRefNum: -179; status: -35; dissenting pid: -1)
    [SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
    Failed to eject volume (null) (FSVolumeRefNum: -178; status: -35; dissenting pid: -1)
    I've x'ed out the mac address from the sparsebundle name. Any help would be much appreciated as I can't understand why it's working when connected but not when on wireless.
    Thanks!

    GT777 wrote:
    Hi,
    Hi, and welcome to the forums.
    This weekend I setup time machine to work with a NAS drive connected to my wireless router.
    Time Machine doesn't work well, if at all, with many NASs. See the pink box in #2 of [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    There are several threads in the Snow Leopard > Time Machine forum with what appear to be similar problems with Iomega NASs.
    If I connect my macbook to the router directly via an ethernet cable, and start a backup, it works fine. If I however try to start a backup when only on wireless it always fails.
    An indication of a bad wireless connection or interference, but could also be the setup of the NAS or compatibility with the way the router works in wireless mode.
    Mounted network destination using URL: afp://;AUTH=No%20User%[email protected]/backups
    After an initial failure, it did connect.
    Warning: Destination /Volumes/backups does not support TM Lock Stealing
    Warning: Destination /Volumes/backups does not support Server Reply Cache
    You've posted in the Leopard forum, and didn't specify what version of OSX you're on. But those messages usually indicate that your NAS is not fully compatible with the Time Machine requirements on Snow Leopard.
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/MAC Backups/Backups.backupdb/Gary's MacBook Pro/2011-01-15-042811
    Those are errors reading from the backups; specifically, getting extended attributes from the backups on your NAS (a "snapshot" is Time Machine's name for a backup folder).
    First, contact the maker of the NAS for updated software/firmware compatible with Snow Leopard.
    That might fix the problem. If not, all we can tell you is, it may be some problem with the setup of the NAS, and/or compatibility with the wireless function of your router. See the maker's instructions/Help/support.

  • E4200 Mac will connect but not pc after power outage

    We had a power outage.  Wireless connection disrupted and did not correct itself as in the past.
    A MAC and an android os phone will connect but not PC's with different operating systems.
    Hardwired computers will connect and go on the internet but not when try wirelessly on windows PC's.
    I have a comcast modem and a e4200 wireless router.
    Tried repowering modem and router.
    Tried disconnecting Cisco on computers and then reconnecting to wireless connection.
    Sometimes laptops will discover the Cisco and show excellent strength of signal but will not connect.
    Wireless is active on the laptops.
    Not sure what has changed to cause this for the win PC's only.  (IP?etc?)
    Any help is appreciated.
    Thanks.
    Solved!
    Go to Solution.

    I read thru some article about the E4200
    Reset
    This button allows you to reset the router to its factory defaults.  Press and hold the Reset button for approximately 10 seconds.  This button is located between the USB and Power ports.  As an alternative, you can restore the defaults from the Administration tab > Factory Defaults sub-tab in the router’s web-based setup page.
    Title: Getting to know the Linksys E4200
    Article ID: 22737
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=7824947fe4444ac3ad5ccb896007e9b8_Getting_to_Know_t...

  • I have an ipod and an iphone 3GS and a wireless LAN device, with my ipod I have a connection, but not with my iphone ... why is that?

    I have an ipod and an iphone 3GS and a wireless LAN device, with my ipod I have a connection, but not with my iphone ... why is that?

    - An iPod can only sync with one iTunes library. Yu can however manage music and videos among different computers by:
    Using iPhone, iPad, or iPod with multiple computers
    - To change syncing computer, move all the media to compute r#2
    - Connect the iPod to #2 and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup
    Note tha the iPod backup the iTunes makes does not include synced media like apps and music.

  • ITunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other.

    iTunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other. Is the port faulty? Windows 7 PC

    Could just be a loose connection or that the cable itself is going bad.  There are a number of factors that could play into this scenario.
    B-rock

  • HELP!! WRT54G2 works for one computer, but not for the other

    I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

    As your one computer is working fine then there is no problem with the router so far...
    The computer which is not working...check the IP Address on that...
    Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
    IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
    If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
    If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
    Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
    If yahoo times out then provide static DNS on your LAN Connection...
    Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

  • 2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

    2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

    You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
    You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

Maybe you are looking for