Phillips Remote does not control Visio A/V Input button

Hi:
I have tried all the available Vizio codes, but the remote's A/V Input button does not control the TV's input selection. Anybody have any luck with this?
Thanks,
Vin

Just a note on this. I seems like every TV manfacturer does the input controls very differently. Because of this the input selection may not work using the verizon remote. for example on some TV's you may have to press INPUT and then use arrow buttons on the TV remote to navigate to the right input. well that is not going to work with the verizon remote because the arrow buttons on the veriozn remote are just for controlling the Set Top Box

Similar Messages

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

AIO remote does not find my printer

I changed Internet providers a few months ago. I have not been able to print from my iPhone or iPad since then. AIO remote does not find my printer at all.

Hi,
Both AirPrint and the HP AIO Remote app relies on Multicasting, a such have to be supported and enabled by your router.
Some routers support a such by default, some require settings changes and some do not support Multicasting which required for a such.
Please clarify your router brand and model to better understand any possible steps to try.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Remote does not find my Itunes Library

I have 4 different mac and use Remote on my Ipod Touch to work with Itunes. Remote cannot connect to one of them (does not find the library). Settings (firewall, airport, account, permission, network...) on all my mac are similar but Remote does not work only with the MacBook Pro. Should I blame his airport card ? Or what ?

I've also version 4.0 on my Ipod and I've checked the port TCP 3689 and UDP 5353 (as asked by Apple support website), they are well opened. I spent too much time on this...I give up Remote.
Anyway thank you very much for trying to help me.

My mouse works but does not control the software

my mouse works but does not control the software

What is it doing? The clicks not work or the cursor not move... etc
Need more info.
Regards,
Captfred

Vibe Duo Headset clicker does not control *anything* anymore on 3Gs

I have spoken to several people on the internet in relation to this problem.
The iPhone 3Gs has been an awesome experience thus far, except for one minor (not minor for me, though...) issue.
My Vibe Duo earphones do not work with the 3Gs. That is to say, I can hear. And people can hear me using the mic. But the clicker does not control anything anymore on the 3Gs. Not sure what changed, but I hope it's a bug and is fixed soon?
Sign in here with whatever experiences you are having with headphone clicker buttons on the 3Gs please.

Same experience here.

How can I record a cassette on CD? New 27 inch iMac does not have mini plug/mic input

I want to transfer music from a cassette to a CD using my new iMac but the iMac does not have a mini plug input for a mic. I understand that I need to get an adaptor to use a USB port. I bought a Syba SD-CM-UAUD USB Stereo Audio Adaptor and tried to use it. All the sound came in on the left channel, the sound level was very high and could not be adjujsted down, and was very distorted. After about 5 minutes of trying to adjust, my iMac showed a dialog that said It was having a kernnel panic! I discontinued trying and returned the Syba. Can anyone recommend an adaptor that will work with the iMac and Toast Spin Doctor?

iMic

SFW5 (BF) does not show me Check / Activate Changes button in ECC 6 EHP4

Hello All,
i am facing a strange problem, i want to activate business Function 'HCM, Core Processes in Talent Management' (BF name 'HCM_TMC_CI_1') in ECC6 EH4 IDES system. I also have SAP enterprise SearchTREX installed and this component shows me dependency in green light in SFW5 tcode (that means all the pre-requisites are fullfilled).
But in SFW5 tcode does not show me Check / Activate Changes button on the top bar, and if i see in menus its greyed out i am not able to activate the same.
I tried to unlock client using tcode SE06 and SCC4 but nothign worked out.
I even checked the authorization of user it has sap_all, SAP_new, IDES_IDA_SUP, IDES_SWITCH, R3_TRUSTED.
I will appreciate any help on the same.
We developed system from Homogenious Export Image provided by SAP to us.
Mani

Hello Mani,
You have to check for the compitability and dependency of already activated Enterprise Extension. If an incompatible Extension set is activated than it wont allow other application to work. Please check and let me know if you require anymore information.
Regards,
Vinit Pagaria

Setting general there is no siri option and siri even does not appear on holding the menu button. Can someone help me!!!! plzz

setting>general there is no siri option and siri even does not appear on holding the menu button. Can someone help me!!!! plzz

Siri is not available for the iPad2, just the New Ipad (3).

HT201406 1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc..

1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present. Tapping screen just brings up the option to: "Select Select All Paste." I have rebbooted with no change.
Message was edited by: Jimfromutah
The problem was my connected bluetooth keyboard.

1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present. Tapping screen just brings up the option to: "Select Select All Paste." I have rebbooted with no change.
Message was edited by: Jimfromutah
The problem was my connected bluetooth keyboard.

Idea Centre K410 does not appear to have a NOVO button

Idea Centre K410 does not appear to have a NOVO button at all
Moderator Note; subject edited; post moved to here

Hi Docol,
Welcome to Lenovo Community Forums!
I’m sorry to inform you that there is no NOVO button in your K410 Computer, but the OKR (One Key Recovery) menu can be accessed by tapping on “F2” key once turning on the computer until the Lenovo Rescue System open, then select OneKey Recovery. Below is the link to download the User Guide for the computer and refer page no. 20 for the steps to access and perform OKR.
User Guide for K410
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off. Please if anyone has any idea that I do, let me know. thanks

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off.
Please if anyone has any idea that I do, let me know.
thanks

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: You have to hold 2 buttons down together.

HP w2558hc 25.5-inch Vivid Color Full HD Widescreen Flat Panel Monitor Remote Does Not Do Anything

I just got the monitor and trying the new stuff out. Hit a couple issues like ... I have tried the remote came attached to the monitor ... the little one in the slot ... but it does not change the volume or anything else . Is there something else I am to do to get to work. Allen

I got the plastic cover off the battery and the battery came out with it, now I cannot put it back in, I suppose it has to slide under the lip but there is a little 'sort of' clip sticking out in the battery hole, below the model and serial number that stops the battery from sittiing properly in the slot. Anyone experience this??

The remote does not work, when i turn the tv on I see the apple tv and the itune icon on the screen

the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.

Did you do a software update?
AppleTV is unable to start properly. You need to connect to a computer running iTunes as detailed here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV

Phillips Remote does not control Visio A/V Input button

Similar Messages

Maybe you are looking for