Phone 4 8 Go problème d'émission de réception d'appel

Bonjour à vous tous
j'ai un problème avec mon iPhone 4 8 go
Le problème c'est qu'on je passé un appel pas de tonalité et le tel bug complètement sur la page d'appel et le même cas pour la réception d'appel appart sa les 3 G  et les messages marche impeccable
Merci à vous tous de bien m'aidé

j'ai le meme probleme avez vous trouver une solution?

Similar Messages

  • Suite à mon problème de téléchargement, j'ai appelé l'assistance téléphonique ...

    Suite à mon problème de téléchargement, j'ai appelé l'assistance téléphonique d'Adobe au 0171230196 qui m'a tout simplement raccroché au nez, mais après m'avoir dit qu'elle ne pouvait pas m'aider car mon PC est sous Vista. J'ai tout juste eu le temps de faire remarquer à mon interlocuteur que depuis décembre j'utilise Muse sous Vista, cela n'a rien changé. Mon interlocuteur arrivant à télécharger Muse sur son PC, je devais me débrouiller. Bonjour l'assistance. Bref, ce n'est pas ma journée, j'aurai mieux fait de rester couché. Donc pour en revenir à mon problème de téléchargement, j'ai enlevé le pare-feu, j'ai essayé un autre navigateur, que puis-je faire d'autre à part changer de PC ?  Merci pour votre aide.

    I believe you have reported same issue on a different thread which I have replied, please try the suggestion.
    http://forums.adobe.com/thread/1431572?tstart=0
    Thanks,
    Sanjit

  • CAN I RESTORE IOS 5.1.1 BECAUSE IOS 7.0.4 IS DOING PROBLE IN MY PHONE HANGGING PROBLE i have shsh  of 5.1.1

    hellow can i restore downgrade ios frm ios 7 because its doing hangging proble i m very scarry for that if can`t downgrade so me never want to buy this type any product  that can`t solve problem by company i phone moslty hang by ios 7 & i phone 4s tooo bad work

    No you cannot down grade the iOS

  • Very slow connection speed, after phone line probl...

    My catalogue of problems starts about a month ago. The phone line developed heavy interference and my Broadband connection kept dropping. This was diagnosed as being a fault with my HH 1.5. BT duly sent me a replacement HH3 which arrived about 3 days later. I installed the new hub, changed all the wiring and the filters for the new kit that came with the hub only to discover that the interference on the phone line was now even worse. It was so bad that at times you could not even hear what was being said on the other end of the phone, so an engineer visit was arranged.
    A week later a BT engineer came and checked the line, sure enough there was a second problem and all the wiring from my house to the nearest telephone pole had to be replaced.
    These problems had had a catastrophic effect on my connection speed and profile (I was getting about 500 kbps both up and down stream), so I dutifully reset the hub after the engineer had finished and waited for the line to stabilise.
    14 days later and the upload speed had doubled, but the download speed is still unchanged at 570 kbps, about half the current upload speed. The line was a bit temperamental for the first few days but I have been able to maintain a solid connection for the last 4 days, current stats are as follows:
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    4 days, 04:42:16
    Downstream:
    574.3 Kbps
    Upstream:
    1.184 Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    29.9 dB / 5.6 dB
    Line attenuation (Down/Up):
    19.6 dB / 12.8 dB
    Output power (Down/Up):
    18.3 dBm / 12.4 dBm
    FEC Events (Down/Up):
    279 / 615
    CRC Events (Down/Up):
    0 / 94
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    0 / 156
    Error Seconds (Local/Remote):
    0 / 42
    There is only one active socket in the house, and the hub has been running from the test socket for the last week.
    Solved!
    Go to Solution.

    The Hub is connected to the test socket. Disconnecting the ADSL feed to the hub has had no real effect (The upload speed increased marginaly but still no change to the download speed). Reran speedtest too, the new stats are:
    FAQ
    1. Best Effort Test: -provides background information.
    Download  Speed
    0.44 Mbps
    0 Mbps
    0.5 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 0.44 Mbps
     For your connection, the acceptable range of speeds is 0.1 Mbps-0.5 Mbps.
     IP Profile for your line is - 0.51 Mbps
    2. Upstream Test: -provides background information.
    Upload Speed
    0.94 Mbps
    0 Mbps
    0.83 Mbps
    Max Achievable Speed
    Upload speed achieved during the test was - 0.94Mbps
     Additional Information:
     Upstream Rate IP profile on your line is - 0.83 Mbps
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 00:02:29
    Downstream:
    574.3 Kbps
    Upstream:
    1.2 Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    29.9 dB / 5.9 dB
    Line attenuation (Down/Up):
    19.5 dB / 12.7 dB
    Output power (Down/Up):
    18.3 dBm / 12.4 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    0 / 0
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    0 / 0
    Error Seconds (Local/Remote):
    6 / 63

  • Problème d envoi et réception message entre iPhone 4s et 3GS

    Bonjour,
    J ai un iPhone 4s et mon mari un 3GS. Nous avons deux abonnements différents, mais depuis une semaine environ, quand mon mari m envoie un message je le reçois avec comme expéditeur moi (c est mon nmr de Tél qui apparaît pas le sien). E s il envoie un message, il apparaît sur mon tel et la réponse du correspondant aussi apparaît sur son tel et le mien. Alors que c est à son numéro que les gens répondent.
    J espère que vous m aurez compris et que vous aurez une solution à me proposer!
    Merci

    Personne pour donner son avis ?

  • I-Phone @ Inaugural - AT&T Fails Again - Damaging Apple Brand Name

    Once again AT&T let down i-Phone users. Terrible coverage across Washington DC while my Blackberry friends enjoyed great service.
    We missed our ride at one point because AT&T system went down.
    In the coat check line at one Inaugural Ball I overheard a group discussing going back to Blackberry. Too frustrated with AT&T's lack of coverage and poor service.
    I have used Apple products since 1987. While I appreciate the i-Phones many features, the first mission of cellular phone is to connect callers.
    AT&T is doing damage to the Apple Brand

    The iPhone is a wonderful product tethered to a 2nd rate carrier.
    What I heard at the Inaugural were iPhone users frustrated with AT&T and pondering returning to Verizon and Blackberry.
    Calls to AT&T are a fruitless exercise. I am president of our local citizens association and have had to deal with all the carriers on various permitting matters. I have found AT&T the least responsive and T-Mobile the most responsive.
    It would be much preferred if Apple could put pressure on AT&T about their service quality, or release us to use iPhones on competitive carriers.
    This long-time Apple user is seriously considering moving back to Blackberry on Verizon because of AT&T's poor performance, not any deficiency with the iPhone or with Apple. And I will return to the iPhone when I can choose my carrier.

  • C3 frimware update fixed my phone?

    yes 7.xx fix my phones sound proble with videos i dont care about the two communites apps and my apps still work even though i updated to 7.xx

    Wait till he will try to use Mail or YouTube over WiFi
    Don't say you want to help - just do it! Happy user of Nokias: 6150 SAT (still work), 6021 (used as backup, still work), 5220 XpressMusic (Drown, screaming for Contact Service), C3-00 (my current phone).

  • Problème utilisation DLL accès mémoire n'est pas valide

    Bonjour,
    A l'importation (création d'une nouvelle bibliothèque) ou à l'utilisation d'une dll déja importée (vi issus de la dll déja importées) une erreur d'accès se produit: "L'accès à cet emplacement mémoire n'est pas valide", ce problème est il connu, une solution existe-t-elle?
    L'affichage d'erreur est en pièce jointe.
    Merci,
    Vincent
    Attachments:
    erreur.png ‏13 KB

    Bonjour,
    J'ai testé la routine d'enregistrement sans succès.  Visiblement, la DLL n'est pas enregistrée et l'enregistrement pose problème. Cette même DLL fait appel à une autre DLL pour le contrôle d'accès (et l'autorisation de l'utilisation de la dll) qui elle même pose problème lors de l'enregistrement.
    Il semblerait que ce soit un problème concernant purement le système d'exploitation et non labview.
    Quel exemple voulez vous que je poste? Le problème est antérieur à la création d'un vi puisque même l'importation de la bibliothèque est problématique.
    Merci pour vos précédentes réponses.
    Vincent

  • Achat indisponible

    bonjour,
    depuis pas mal de temps j'ai un probléme récurent avec le téléchargement d'application dans l'apstore.
    Impossible de télécharger quoi que se soit, un message apparrait ( achat impossible "nom de apps" ne peut pas être acheté pour l'instant. réessayez ultérieurement") malgrés plusieur opération de moification du comptes itunes, et de restauration de mon téléphone le probléme est récurant. et se sur plusieur iphone.
    quelqu'un rencontre t'il le meme probléme que moi?

    Pareil pour moi impossible de télécharger une application depuis aujourd'hui sur mon iPhone 5S.
    Même message d'erreur cité précédemment.

  • Reception Antenne iPhone4 catastrophique !

    Salut, j'ai des gros soucis de réception avec l'iPhone 4, impossible de réceptionner un appel correctement ! C'est un comble pour un téléphone ! Très déçu par votre manque de réactivité, c'est probablement mon dernier achat Apple ...
    Que proposez vous Apple comme solution ?

    Merci, l'iPhone a été acheté dans un magasin bouygue avec forfait compris et est activé, cela ne vas pas poser de problème, dois-je le retourner cher bouygue ?
    Qu'en pensez vous ?

  • Why is simple tasks on the IPhone 5 so Difficult  (new to IPhone previous smartphone was the Sony Xperia Z )

    Hi All
    Maby you can help me out
    My Girlfriend has been telling me that the IPhone is such an amazing Phone its the best Phone you can get, im hoping she can prove that
    i have had the device for about 4 days now and there is a few things i dont understand about the IPhone
    One... Why is Setting a Ringtone such a mission you cant just have your music on your phone and say set ringtone, you have to physically plug your phone in to itunes and make a ringtone and then transfer it to your phone ...What a Mission
    Two... if you playing a song and a mate likes that song but does not have an IPhone i cannot send him the song via bluetooth which *****, why does is it like this so i can get a better understanding?
    Other than that there are a few complicated things on the phone
    Maby you guys can help me out maby im doing it the looooooong way for such a simple task.....
    i Currently own a IPhone 5 running IOS 7

    Are there apps on your phone right now? 
    I think one of your apps is causing this.
    The only way to find out is to delete them all and then add them one by one to see what app maybe causing this.
    Especially if you've gone thru 3 iphones already.
    When you restored as new - did you sync back your stuff - apps/music or did you restore from backup?

  • Je tourne en rond depuis plus d'un mois.

    Ayant quitté la Suisse pour l'Ile de de la Réunion (France) il m'est impossible de mettre à jour mon ID. Le bouton "changer de Pays"est un lien qui ne mène nulle part et je reçois le même message: pour renouveller votre abonnement... blablabla. En changeant de pays j'ai aussi changé de carte de crédit, mais impossible de mettre cela à jour en ligne. Et pas de téléphone qui marche. Après des heures à essayer d'appeler le Nr indiqué pour la France ET celui de Suisse, je voudrais trouver une solution QUI MARCHE- entre le décallage horraire et les pannes d'internet, je commence sérieusement à flipper!!! qui a vécu ce genre de problème et comment cela a-t-il été résolu? merci...

    Google Translate:
    I purchased a subscription with an operator in Spain when I lived in Barcelona there are more than a year however I have to return urgently to France for personal reasons and for the many emails sent to my operator I never response.
    I want to use my Iphone but I can not hang on because it is the operator in question, How to unlock and use a French sim?
    Only your operator can request your phone to be officially unlocked.  You'll have to keep trying to contact them.
    Google Translate:
    Seul votre opérateur peut demander votre téléphone pour être officiellement débloqué. Vous aurez à continuer d'essayer de les contacter.

  • Unabel to sync from Mac to Appel Tv

    I just disconnected DSL with the local phone company I left my wireless router hooked up and Appel TV plugged in also Why would DSL have to be active to SYNC ??? Thanks Ed

    you may need to power down the entire network then power it back up.

  • NI9211 erreur -225202 DAQmx

    Bonjour,
    Je travaille avec la version 5.5.1f0 de MAX.
    Je viens de recevoir un "NI DAQ-9171" dans lequel, j'ai placé un "NI 9211". Il s'agit d'une carte permettant d'acquérir 4 températures.
    Dans "Measurement & Automation Explorer", je vois correctement Système ==> Périphériques et interphaces ==> NI cDAQ-9171 "cDAQ1" ==> 1: NI9211 "cDAQ1Mod1
    Je sélectionne ma carte NI 9211 et je sélectionne l'onglet "Panneaux de test", ce qui m'ouvre une fenêtre, où je peux choisir une voie analogique et grâce à un graphe, voir l'évolution de la température. Si je fais démarrer, les voyants "active" et "ready" sont bien allumés sur le boîtier et la mesure se fait correctement en affichant une courbe aux bonnes températures. Au bout de 3 minutes environ, la courbe passe brutalement à -250°C. Si j'arrête la mesure, il ne m'est plus possible de la relancer.
    J'ai le message d'erreur suivant :
    L'erreur -225202 s'est produite à daqmxcfg_DAQmx Start Task.vi:1
    Raison(s) possible(s) :
    Internal Software Error occured in MIO software. Please contact National Instruments Support.
    Est-ce que quelqu'un aurait une idée de l'origine du problème ?
    Je précise que si je débranche l'appareil (il se branche en USB) et que je le rebranche, alors, il se remet à fonctionner pendant quelques minutes avant de m'afficher à nouveau le même message d'erreur.
    J'ai récupéré des programmes Labview utilisant la même carte que moi, et là aussi, cela fonctionne pendant quelques minutes.
    Merci d'avance.
    Edit : Je viens de trouver une personne qui a le même code d'erreur que moi (http://forums.ni.com/t5/Multifunction-DAQ/Error-225202-for-NI9211/td-p/561593). La seule réponse est que le problème pourrait être matériel.
    Edit 2 : Je viens de trouver cette page qui mentionne mon erreur : http://digital.ni.com/public.nsf/allkb/1B7C591595D03F82862574120068AB55
    J'ai fait le test "auto-test" et il est bon, même après que je ne puisse plus faire de mesures.
    Pour ce qui est du panneaux de tests, il fonctionne juste pendant quelques instants, puis, il est nécessaire de débrancher/rebrancher le boîtier pour recommencer les mesures.
    Résolu !
    Accéder à la solution.
    Pièces jointes :
    erreur NI.jpg ‏338 KB

    Bonjour Fredo_L,
    Il semblerait que le problème soit matériel. Pouvez vous appeler National Instruments au 01 57 66 24 24 pour démarrer le processus de réparation de la carte ? Vous pouvez également envoyé un email à [email protected]
    Cordialement,
    Benoit S. - Field Sales Engineer
    Certified LabVIEW Developer
    Certified TestStand Developer
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Été de LabVIEW 2014
    12 présentations en ligne, du 30 juin au 18 juillet

  • Probleme reception email sur iphone 4

    bonjour a tous depuis plusieurs jours je n'arrive plus a relever mes mail sur mon iphone 4 s. si il y a eu d'autres personnes qui on eu le meme souci  merçi de me dire s'ils ont trouver la solution au probleme en attente d'une reponse merci a tous

    Use the buttons on the side of the phone.  If the volume is too low on a call, use the buttons to turn the volume up while on a call.
    Used Google Translate. Hope this is correct:
    Utilisez les boutons sur le côté du téléphone. Si le volume est trop bas sur un appel, utilisez les boutons pour augmenter le volume pendant un appel.

Maybe you are looking for

  • Data Template using sql query

    Hi All, I'm trying generate xml data using data template approach. For this do i need to use XSQL to generate xml data? Can some one please tell me what is this XSQL and how it works? Thanks in advance,

  • Custom color swatch

    I have a custom color swatch list that I would like to have access to from the configurator panel. Is this possible? If so, how u do dat? Any and all help would be appreciated..... Happy Holidays and a Healthy and Prosperous New Year to us ALL.

  • Can't hear long notes when played half way through

    This is probably a common problem/question. I often have very long sections with a single continuous chord (in this instance 'dynamic swell' 'extra cello sect legato' and 'tonewheel organ') My problem is that to check edits on small sections of a com

  • IWeb pages don't work just the "Home" one

    I recently published my website, and everything went smoothly just that the other pages cannot be clicked on. Only the main page works but the other tabs are not clickable. And I checked the inspector in iWeb and it doesnt seem to be overlapping. Tha

  • Firefox 32+ Crashes When a Regex Is Executed in a Mid to Long Page

    Hi. I use an extension for text replacement on pages and since Firefox 32 came I can't use it anymore on most pages (the mid to heavy weight ones), because when I use it, Firefox freezes and don't even show a sign that it will return responsive (I co