Phone 5 to use here in the States with an AT

Hi, I unlocked my iPhone 5 to use here in the States. (From the UK) I restored via iTunes. Have an AT&T SIM. Could make and receive a call, but now can no longer. Still connected to AT&T but cannot make or receive calls. Please can anyone help or advise? Thank you, C

Hi Carolineida,
If you are having an issue with being unable to make or receive phone calls with your iPhone, I would suggest that you troubleshoot using the steps in this article - 
If you can't make or receive calls on your iPhone - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L 

Similar Messages

  • I got an iPhone 4 while I was living in Japan. How can I use it in the states now that I live here?

    I was using an iPhone 4 while I was living in Japan. How can I use it in the states now that I live here? It is a perfectly good phone and I don't want to use it only as an iPod and camera.

    That's one option. The other is to sell it (you can probably get close to what you paid for it) or trade it in and get a new unlocked phone directly from an Apple store. That way you can use it in the US, and also in Japan when you return there.

  • HT201229 one of my iPhone contacts messages go out as green, not blue, she has tried to turn off and then back on her messages, and it works fine for everyone but me.  Mine go as green o her.  My phone is iPhone 5, hers is the latest iPhone.

    one of my iPhone contacts messages go out as green, not blue, she has tried to turn off and then back on her messages, and it works fine for everyone but me.  Mine go as green o her.  My phone is iPhone 5, hers is the latest iPhone.

    Hello SaSexton,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Have a nice day,
    Mario

  • When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

    When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

    I don't know that you can purchase in one country and use it in another.  Try contactoing Adobe support thru chat:
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

  • I bought my iphone4 in singapore. Can i used it in the philippines with my globe postpaid plan?

    I bought my iphone4 in singapore. Can i used it in the philippines with my globe postpaid plan?

    It seems that the iPhone is available unlocked in SG. However the warranty is not international and LTE is not guaranteed to work in the UK and EU on a SG bought phone.
    http://store.apple.com/sg/buy-iphone/iphone6

  • If I buy an iphone in USA can I use it in the UK with my UK provider Virgin Mobile

    If I buy an iphone in USA can I use it in the UK with my UK provider Virgin Mobile

    It is advisable to purchase the phone in the country you intend to use it.
    1)  You will have Warranty...
    2)  your phone will work as expected.
    3)  Unless Purchased Directly from Apple as an UNLOCKED device, the iPhones will be Locked to a US Carrier.. usually for a 2 year contract period.

  • My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?

    My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?
    We would like to have all our music, photos, etc. on the iPad - is it best to create a new combined Apple ID for the iPad and simply upload our music, photos, etc. via our laptop instead? Does this not then render the iCloud useless to us?

    And just in case you were wondering, installing one purchased copy on all the Macs you own is specifically called out as allowed in the Mac OS X Lion license.
    If you do not want to download multiple times, just copy the Applications -> Install Lion app to a safe place BEFORE you do the first install.  Then copy that copy to any Mac you own where you want to install Lion.

  • If i buy an iphone in Australia and it is unlocked, can i use it in the uk with a uk sim?

    if i buy an iphone in Australia and it is unlocked, can i use it in the uk with a uk sim?

    Depends on model for LTE(4G) see this list
    http://www.apple.com/iphone/LTE/
    As long as you buy direct from an Apple Store is should not be carrier locked and will work on 3G and if say an iPhone 6 then 4G as well
    HOWEVER
    You will not have warranty or post warranty service in UK for a Australian sourced iPhone ,the warranty is NOT international

  • Is there a linear equations VI thatI can use for inputting the coefficients with variables attached to them? Thank you.

    Is there a linear equation VI that I can use for inputting the coefficients with variables attached to them? I am currently studying elec engineering and am in the thick of transient analysis. It is very time consuming figuring the mesh and nodal analysis in the transform domain. With 3 branches in a mesh analysis the resistors, inductors and capacitors are represented with variable s in them. I need to determine in the transform domain then convert to the time domain. One equation goes like this: (3+2s+1/4s)i1s - (2s)i2s - (1/4s)i3s = 6/s -6. The other equations are similar. I must keep the variable s in the equation and solve it with s in the result. I made several VIs for determining simultaneous linear equations some for complex numbers and they work great. This one has me a little stumped. I thinking that maybe Labview doesn't have a VI for this. The other VIs were fine because you just plugged in the numbers and ran the VI and got your result. Any VIs that do LaPlace transform operations?
    Thank you.
    Tom

    Hello Tom,
    You can find a VI for doing Laplace transforms in Functions->Analyze->Signal Processing->Frequency Domain (this VI is only available in the Full and Professional versions).
    You may also find the following tutorial of help in working with linear systems in LabVIEW.
    Linear Systems in LabVIEW
    Keep up to date on the latest PXI news at twitter.com/pxi

  • Hi I'm from the UK and I'm visiting the US in June I was wondering would I be able to buy a Mac mini over in the US and use it in the UK with a power adapter. Thanks!

    Hi I'm from the UK and I'm visiting the US in June I was wondering would I be able to buy a Mac mini over in the US and use it in the UK with a power adapter. Thanks!

    You won't need a plug adapter if you buy a figure-of-eight mains lead (like most portable radios etc) with a UK plugtop to replace the original lead.

  • Phone froze while using Here drive

    Today my phone froze while using the Here Drive. It worked perfectly on the journey to my destination, unfortuntately failed and the phone froze with the screen still on the Here Drive where it froze. I was unable to change the screen or click on anything. Screen stayed the same until I arrived home.
    Upon arriving home after looking at the support for the phone, I tried the soft reset and no response. Phone is still dead.
    The phone was on charge through out the journey. and charged up fully prior to the return journey.
    Screen is now totally blank.
    My phone has never frozen before and was updated to the new Here Drive yesterday.
    Infact very proud of it.
    Any advice would be appreciated.

    Viborg wrote:
    This is not a battery issue because the phone is being charged while driving.
    Only if you have chosen 2D raher than 3D, as output of CR-200 only 750mA which is not enough if number of background applications running!
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Does it cost extra to use wifi outside the states?

    I am in germany and I'm using my families wlan to connect to the internet with my cell phone (send emails, check facebook etc). Now i was wondering if that is going to cost me any extra. My Plan is NATIONWIDE TALK & TEXT FS 700
    Since it's wifi I figured I would not be charged for it.
    Thanks in advance for any answeres.

    yasminholmes wrote:
    I am in germany and I'm using my families wlan to connect to the internet with my cell phone (send emails, check facebook etc). Now i was wondering if that is going to cost me any extra. My Plan is NATIONWIDE TALK & TEXT FS 700
    Since it's wifi I figured I would not be charged for it.
    Thanks in advance for any answeres.
    If you are using your family's WLAN, then you will not be charged for it. Just make sure that it is the WLAN and not wireless cellular data that you are using.

  • Sending email using CL_BCS in the background with subject line 255 chars

    Hello Gurus,
           Following is the sample code,. When I run in the foreground, I am getting the mail, with proper subject line. However my output medium type is '5-'External Send#. When I am trying to run this in my output program, it is resulting in dump.
           When I keep 'COMMIT WORK',  I am getting a dump saying tText * Invalid COMMIT WORK in an update function module.*
           When I remove this 'COMMIT WORK', I am still getting the error, saying Screen output without connection to user. (The current ABAP program "SAPLSTXC" statements could not be executed.)
          Hoping for a quick solution.
    Regards,
    Shaheen
    REPORT  Z_CL_BCS_TEST.
    * Trying classes
    DATA: send_request        TYPE REF TO cl_bcs.
    DATA: li_main_text        TYPE bcsy_text,
          lw_main_text        LIKE LINE OF li_main_text.
    DATA: document            TYPE REF TO cl_document_bcs.
    DATA: recipient           TYPE REF TO if_recipient_bcs.
    DATA: sender              TYPE REF TO if_sender_bcs.
    DATA: l_mtitle            LIKE sodocchgi1-obj_descr.
    DATA: sent_to_all         TYPE os_boolean.
    DATA: bcs_exception       TYPE REF TO cx_bcs.
    DATA: lv_sub TYPE string.
    TRY.
    *     -------- create persistent send request ------------------------
        send_request = cl_bcs=>create_persistent( ).
    *     -------- create and set document---------------
    *     Email title
        l_mtitle = 'attachment'.
        lv_sub = 'Email Title : I want to try for a subject which is more than 50 chars. will this work?'.
        CALL METHOD send_request->set_message_subject
          EXPORTING
            ip_subject = lv_sub.
    *     Fill the body of the mail
        REFRESH li_main_text.
        lw_main_text = 'This is test email'.
        APPEND lw_main_text TO li_main_text.
        CLEAR: lw_main_text.
        lw_main_text = 'Regards'.
        APPEND lw_main_text TO li_main_text.
        CLEAR: lw_main_text.
    *     Create Email Object
        document = cl_document_bcs=>create_document(
          i_type    = 'RAW'
          i_text    = li_main_text
          i_subject = l_mtitle ).
    *     Add document object to send request
        send_request->set_document( document ).
    *     add recipient (e-mail address)
        recipient =
            cl_cam_address_bcs=>create_internet_address(
                  'Shaheen.Taori at solvay.com' ).           " changed the email id purposefully
    *     Add recipient object to send request
        CALL METHOD send_request->add_recipient
          EXPORTING
            i_recipient = recipient
            i_express   = 'X'.
    *     ---------- send document ---------------------------------------
    *    sent_to_all = send_request->SEND_WITHOUT_DIALOG( I_WITH_ERROR_SCREEN = ' ').
        CALL METHOD send_request->SEND_WITHOUT_DIALOG.
    *      EXPORTING
    *        e_sent_to_all = 'X'.
    *    IF sent_to_all IS INITIAL.
    *      MESSAGE 'Erorr while sending email ' TYPE 'E'.
    *      EXIT.
    *    ENDIF.
          COMMIT WORK.
    *   exception handling
      CATCH cx_bcs INTO bcs_exception.
        MESSAGE i865(so) WITH bcs_exception->error_type.
    ENDTRY.

    Try using method SEND instead of SEND_WITHOUT_DIALOG.
    Also try calling method SET_SEND_IMMEDIATELY before calling method SEND.
    Use below code lines,
    send_request->set_send_immediately( i_send_immediately = 'X' ).
    sent_to_all = send_request->send( i_with_error_screen = 'X' ).   " Instead of CALL METHOD send_request->SEND_WITHOUT_DIALOG.

  • I have a problem with safari, when I open new tab the tabs don't have the exit button that it used to be on the left corner of each tab and i used to close the safari with command Q witch is not working anymore ! what am I supposed to do ?

    how can I fix this problem ? I cant close the safari with command Q anymore and the tabs don't have the exit botton that used to be on left corner !

    Use cmnd+w to close the tab.

  • How to use spry in the dreamweaver with the php/mysql

    hello,
    Iam new to the spry framework
    and i want to know can we use the spry in the dreamweaver
    along with php / mysql code
    if so please tell how to do this
    thanks in advance

    swetha123 wrote:
    > but when i complie this page it is not showing the
    preiew or any thing in the
    > browser i saved this page with the extension .php if i
    run the same page with
    > .html then i can see the design but it is not being
    executed
    The reason you get nothing when you save the page with a .php
    extension
    is because you have display_errors turned off, so you can't
    see the
    error message telling you there's a syntax error. The
    semicolon is
    missing at the end of this line:
    > echo "<font color='white'>Hello
    Swetha</font>"
    The reason it doesn't work with an .html extension is
    probably because
    you haven't uploaded SpryAssets/SpryTabbedPanels.js. I have
    copied your
    page and tested it locally with the correct JavaScript file,
    and the
    tabbed panels work as expected.
    There are lots of other mistakes in your page. You can't use
    float and
    position:absolute on the same element. In at least one place,
    you have
    used </br> instead of <br />. You have also got
    an closing paragraph tag
    after the paragraph that contains abc.jpg.
    Getting Spry or any other JavaScript library to work
    correctly relies on
    good, clean code. Your mixture of inline styles and font tags
    is going
    to make it difficult to incorporate Spry into your pages. I
    suggest you
    improve your HTML and CSS before bringing Spry into the mix.
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

Maybe you are looking for