Phone adapter PAP2T

Hallo guys, I just bought the above phone adapter, but I can't configure it right. I gave it static ip, my router as gw, my voip provider as proxy (if I am not mistaken), user name and password of my voip provider. Still the light of the phone port remains off. What am I doin g wrong?

First you need to configure the PAP2T with user id (which is phone number), password and proxy. This information can be found from your VOIP provider. After you finished applying the those information then you may follow this kb article
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=5193&p_created=11686....

Similar Messages

PAP2T VOIP phone adapter not working

My new Linksys PAP2T VOIP phone adapter will not work. When I install the adapter (I'm sure I have done this correctly), all I get is a slow blinking green power light and a fast blinking green internet light. I get no phone light, and I get no dial tone. Is my PAP2T defective? Or is something else going on? Can you recommend a fix?

The "User Guide" which comes with your PAP2T and you can read or is downloadable from Linksys says the following about the "Power Lite"
Green. The Power LED lights up when the Phone Adapter is powered on and connected to the Internet. It flashes when the Phone Adapter is not connected to the Internet. The LED also flashes when the Phone Adapter is booting up or upgrading its firmware.
It says the following about the "Internet Lite"
Green. The INTERNET LED lights up when there is an active connection through the port. If the LED is flashing, then there is traffic moving through that port.
It says the following about the "Phone Lite"
Green. The PHONE LED is solidly lit when a telephone or fax machine has an active or registered connection to your Internet phone service provider through the corresponding port. It flashes when the phone is being used or is off the hook.
Using logic, I would say the adapter may not connected to the internet and if it is, the adapter failed to register with your voip provider.

Ordered skype voice phone adapter...nothing happen...

I placed an order on November 14, 2012. The message in my email says that it would ship on November 26, 2012. The message also had a link to track my order. I am a patient sort of fellow. I waited six weeks and today I tried to see what happened to my order. I looked at the link in the message and it is now a broken link. I am beginning to think I am out $59.99 and have no idea how to get my product which I truly wanted or get my money back. I love skype phone service. It's been awesome for the last 4 years. I may have made a grave error in buying a product from the skype store though. There doesn't seem to be anyway to contact someone about my order. Here is the message I receive below (minus my name and address). At this point, I would cancel the order but alas, there is no link and no phone number to effect a cancellation. Do I call the bank?
hank you for your order from eBuyNow. We recommend you keep a record of your order number as you may need it for future reference.
We have created an account for you with your email address as the username. If you wish to get your password to login to your account, click on the link provided below and click 'forgot my password' and your auto generated password will be sent to your email address. This will allow you to look at the status of your order at your convenience.
To login to your account, please go to [invalid URL]
Please go to [invalid URL] for further information or to send a question to our Customer Support Team.
==============================
==============================
ORDER INFORMATION:
Amount Product
==============================================================
$59.99 Skype Voice Phone Adapter + 3 Months of Skype C
$59.99 Subtotal
$0.00 Shipping & Handling
$59.99 Grand Total
You have purchased a back ordered item Skype Voice Phone Adapter + 3 Months of Skype Calling in US and Canada TALK-1200-3MNA.This product will be available to ship on November 26, 2012.
BILLING INFORMATION:
my name and address
Albuquerque, New Mexico, 87111
United States
my phone
SHIPPING INFORMATION:
my name and address
Albuquerque, New Mexico, 87111
United States
my phone
============================================================
General Information
eBuyNow is operated by
eBuyNow Ltd, 704 Stag Building, 148 Queen's Road Central, Hong Kong & eBuyNow Ltd, Third Floor, 207 Regent Street, London W1B 3HH, United Kingdom.
[invalid URL] Through its websites, eBuyNow offers business and consumer electronics hardware,
software and services.
Tax and Duties
eBuyNow operates across the world and we have
agreements with the tax authorities of various countries to
collect tax on their behalf. These taxes have been included
in the price you pay and are itemized on your invoice.
No further taxes will be charged.
Delivery
We do not charge for shipping - there are no extra costs.
Goods will be sent to the address given by you in your order.
Please note that if you are ordering more than one item,
your goods may be sent to you in separate shipments. Approximate
delivery periods globally are 7-10 working days.
Cancelling Your Order
You may cancel your order within 7 days of delivery for a
full refund. You will have to return unwanted goods at your
own cost unless we have not sent you exactly what you ordered.
You will find full details at [invalid URL]
Warranty
eBuyNow supports the terms of manufacturer product
warranties and will provide a replacement, or at our
discretion, a refund, for defective products under warranty.
You can get full details from [invalid URL].
We will pay reasonable return charges for defective products.
Applicable Law
Your contract with eBuyNow is governed by the
laws of England and Wales.
============================================================
eBuyNow Ltd, 704 Stag Building, 148 Queen's Road Central, Hong Kong & eBuyNow Ltd, Third Floor, 207 Regent Street, London W1B 3HH, United Kingdom.
PLEASE NOTE THAT THIS IS NOT A RETURNS ADDRESS. FOR ALL
CUSTOMER SUPPORT QUERIES PLEASE GO TO
[invalid URL]

Hi, wmcneillabq, and welcome to the Community,
Thank you for your letter and report, which I have also alerted eBuyNow to as well. If you wish to cancel your order, best practice is to cancel your order with eBuyNow first:
Please go to ebuynow.info/en/contact/lookup.php (add the http:// as this forum does not allow hyperlinks).
If you wish to file with whatever payment method you used, then of course that avenue is yours to pursue as well.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

USB Skype Phone Adapter - How to use it?

Hello everyone,
I would like to ask regarding USB Skype Phone Adapter, as I am planning to buy it. But, before I buy it I would like to know if I can still use skype to call locally using the land phone line (since it's by contract, and local calls are all free). Can I use the skype keypad to make those calls? Can I have access to my land phone line through skpye to make local calls, even though I might use it from a different country through skype? Please help me with issue. Thank you very much in advance!
phoenix

First of all, you seem to be using some custom classes as there is no table and no SimpleTableModel in Java ME.
That said,
The simpleTableModel is already attached to the tableSo when you assign the variable reference tableModel1 to a new object, it is the earlier referred object that is still 'attached' to the table, not the newly constructed one.
If you can head me to the right documentationThat would be available from wherever you got the classes.
db

The FREETALK Connect•Me Home Phone Adapter for Sky...

Hi all,
I am seriously considering dropping my landline since I mostly if not only uses my iPhone as my primary device for calls. The problem I have is an alarm system is connected to my land line and requires a way to call the alarm centre in case of an emergency.
I talk to my alarm service provider for an alternative. They already have the cellular option, but it adds $12/m which is not a big saving... They are working on finding an IP/Internet solution, but it will be also a $4/m.
I was wondering if I could use the FREETALK Connect•Me Home Phone Adapter for Skype as a solution. From a computer I can call any 1-800 numbers for free, and I really suspect that the alarm centre is a toll free number too. So in theory it could work.
Can anyone share their experience with the device and suggest if my solution can work or not?
Thanks

I use that adapter in my house, it works just as a normal landline would. There is a slightly longer predial delay when initiating a call (approx 3 second Skype dialing noise), beyond that no real difference. If the box doesn't lock up, or your Internet doesn't go down it should be rather reliable as a replacement. Those are worst-case scenarios and I generally don't find myself having to do anything to maintain it. In any case I have it connected to a power surge strip like I do the rest of my equipment. Should I need to reset it, I just toggle the switch.

FREETALK Connect-Me phone adapter discontinued

I noticed today that the FREETALK Connect-Me phone adapter has been discontinued. Is there a replacement solution? My device has been working great for several years and I use it all the time for connecting my home phones to skype.

That's always a possibility. However I'm not aware of it being discontinued by the manufacturer. You can generally buy it from the Freetalk site (http://freetalk.me/). Occasionally I've seen it disappear from the site (like now) when they are out of stock, then reappear again. It's also available on Amazon and Ebay.
Some people have used the Soundwin SP110, but there have been a lot of stability/quality issues with that device. http://www.soundwin.com/style/frame/templates3a/product_detail.asp?lang=2&customer_id=824&name_id=40...

Can I use the FREETalk phone adapter without a lan...

I have disconnected my landline service. Can I receive skype call to my regular cordless phone handset with a FREETalk phone adapter and a Skype online number?
Thanks in advance any help.

This is actually a really old thread. The FreeTalk Connect Me can be used without a landline. If you chose to use a landline for emergency purposes, there is nothing inherent to the device to filter local calls.
I was getting spammed on my local loop "Emergency line", after being told by my "no longer local telco" L2/L3 techs that receiving calls were impossible because I don't use their service. I ended up rerouting my connection to a separate phoneline that rings all hours of the night. Setting my extra phone to "never ring" fixes that. So now I have an active "never-ring" outbound emergency line.

Trouble w/Linksys WRT54G2 connecting w/Linksys Phone Adapter SPA2102

I am trying to connect my new VOIP phone adapter Linksys SPA2102 with my wireless router Linksys Cisco #WRT54G2 V1. I have DSL and previously had the wireless router connected with a Vonage Phone Adapter and everything worked fine. When trying to connect my new phone adapter Linksys(SPA2102) it does not work. It will work if I connect the new adapter directly with my DSL modem but will not work through my wireless router (WRT54G2 v1). I have turned everything off and restarted all products several times along with the PC and still no luck. The only way I can get my DSL to work with the new adapter is to wire it directly to the DSL modem. Everything worked yesterday prior to trying to use the new phone adapter. I hope this makes sense lol. This is not allowing me to use my laptop through the wireless router. Any help would be greatly appreciated. Thank you.
Jenny

you should try this -- it shows you how to configure wrt54g2 behind the SPA2102 because it is recommended that you put the SPA2102 directly behind modem for better voice quality

IPhone + Cell Phone Adapter + Bose Aviation Headset X = Will this work?

Would I be able to use this cell phone adapter with my iPhone?
http://www.sportys.com/acb/showdetl.cfm?DID=19&Product_ID=7145
it requires a 2.5 mm jack. Is this the same jack that I plug my earbuds into?

It won't work for 2 reasons:
1) Your iPhone has a 3.5mm headset jack.
2) The iPhone connector has 4 conductors: 1 common, 1 left ear, 1 right ear, 1 microphone. This device has 3 conductors: 1 common, 1 ear, 1 mic.
Sorry.
-Peter

Help Connect me phone adapter cannot detect phon...

Hi there,
I recently bought Freetalk Connect Me phone adapter through Skype website. When I hook up phone line, ethernet and wall line as instructed, the setup wizard successfully detect my internect connection. However, it cannot detect my wireless phone. I tried another wireless phone but it failed again. I try to replace my existing voip to skype so I'm pretty sure my phone works well. During the initial setup, I saw the red light goes to flashing green light while trying to detect my phone....then it goes to red and repeat again.
Does anyone have this problem before? I try to locate Freetalk customer service number, but they don't have one.
JJ

Plese also see this: http://community.skype.com/t5/Other-devices/Use-Your-Own-Phone-Device-Router-Based/td-p/123156
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

Does: home phone adapter + online number = ability...

i have not found any information that says specifically that non-skype callers can call you via a home phone adapter or a Skype-ready cordless phone. I know you can call out, but what about receiving calls? Anyone here have a skype-ready cordless phone?

I'm also considering buying phone adapter. And to get a phone # attached to it to be able to receive any regular call on the phone (not on the computer) - do I just get an online number - is there any other option?
I did not find any related info in FAQs, etc.

Linksys Phone Adapter PAP2 question

Can i connect two Linksys Phone Adapter PAP2 to one linksys router without creating any networking issues ?

chojna wrote:
Can i connect two Linksys Phone Adapter PAP2 to one linksys router without creating any networking issues ?
Yes you can connect them. Each will get a different local ip address and the router is supposed to keep the port numbers straight. It is easy to change the sip port numbers on one of the PAP2 adapters and to also change the RTP port range on that adapter. Then you don't have to worry that the router can't keep those port numbers separated and you more or less have to make this change if for some reason you need to forward the port numbers in the router.
Message Edited by hw on 12-28-2009 08:49 AM

Phone Adapter for cable internet

I have recently switch to cable internet and phone service through Cableone. I purchased a CM100 modem, but didn't realize that I also needed a phone adapter. What do I need to by now to hook up my phone? Just the PAP2 Phone Adapter or do I need to purchase a router as well? Thanks for any replies...

Either you can go for PAP2 or else you can VOIP router. WRTP54G.

Connecting PSTN line to SPA112 2-Port Phone Adapter

Hi,
Not sure if this question is right but can I use the SPA112 2-Port Phone Adapter to connect a PSTN line? What I want is, I should be able to choose a line and while making calls. Use PSTN or VOIP.
Please let me know if I am using a wrong device for my purpose.
Regards,
Naidu

No, it cannot, that device has FXS ports, no FXO ports
Includes two standard telephone ports, each with an independent phone number, for use with fax machines or analog phone devices
http://www.cisco.com/c/en/us/products/collateral/unified-communications/small-business-voice-gateways-ata/datasheet_C78-691106.html

Can't set up D-Link phone adapter DPH-50u on Windo...

I am moving my phone adapter to another computer running Windows 7. Install and everything goes well, but the adapter can't communicate with skype, for some reason. Tray indicator is red. I have tried different combinations without success.
Any help would be appreciated. The adapter is great once installed successfully, but installation is always a problem. I have installed for friends as well, but always a big deal. Right now I am frustrated, and thought possibly someone has some suggestions.
Thank you
Leon
*edited for privacy*

I had the same problem.
I don't know whether or not it was a coincidence, but I did the following:
Use a computer to Logon to www.icloud.com.
Go into Account Settings.
Click on Advanced.
Then click on logout of all browsers.
I was then able to log into My AppleID and start the two step authentication setup. When I added a new phone, it sent an SMS and it then prompted me for the 4 digit code.
Again, not sure whether this is a coincidence, but I never received the prompt to enter the 4 digit code until I accessed the iCloud website and followed the above steps.

Phone adapter PAP2T

Similar Messages

Maybe you are looking for