Phone and Contacts APP not working after the upgrade 4.01 from 4.0
Dear all
after the upgrade to 4.01 my iphone stop to operate the phone and the contacts app
when i open phone or contacts the app close(crash) after 1 sec.
When i connect to the mac i have the following message from itunes:
"iTunes could not sync to the iPhone"Christos" because contacts are being synced over-the-air."
Trying to open and change the settings at: mail, contacts, calendar but also crash
Please help
Thanks for your support
This happened to me after I upgraded to 4.0. While the iPhone update offers some great new features it has really done a number on some very basic functions and overall operation.
I am no longer able to use the contacts app to place calls. I can pull up my contact list but when I select an individual contact, the phone seems to freeze for a second and then crashes. (It might be worth mentioning that I use Exchange to sync my contacts.) While the contacts are all on the phone, I can't access actual contact information for each individual.
I'm also experiencing random freezes, touchscreen delays, etc.
I can deal with some minor bugs but not being able to use your contacts to place calls is a huge problem.
Similar Messages
-
Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.
@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help! -
My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue
Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh.. -
The MSS ECM FPM Steps are not working after the upgrade
Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.Kclinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000
-
when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03
there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
Do a reset
restore with back up and if required as new -
CFHTTP and Scheduled Tasks not working after CF8 Upgrade
I have recently upgraded to ColdFusion 8. My scheduled tasks
in the ColdFusion Administrator do not work anymore. I ran them
manually without the ColdFusion Administrator from the server and a
local machine via Internet Explorer 7 and they work. I tried to run
the same scheduled task with the same URL via CFHTTP in a CFM page
and this does not work. The logs are not giving me any error
messages. Has anyone run into this? Is this a bug with CF8 or even
an IIS issue? ColdFusion is on a Windows 2003 SP2 server.
Thanks,
Mike<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML dir=ltr><HEAD><TITLE>The page cannot be displayed</TITLE>
<STYLE id=L_defaultr_1>A:link {
FONT: 8pt/11pt verdana; COLOR: #ff0000
A:visited {
FONT: 8pt/11pt verdana; COLOR: #4e4e4e
</STYLE>
<META content=NOINDEX name=ROBOTS>
<META http-equiv=Content-Type content="text-html; charset=UTF-8">
<META content="MSHTML 5.50.4522.1800" name=GENERATOR></HEAD>
<BODY bgColor=#ffffff>
<TABLE cellSpacing=5 cellPadding=3 width=410>
<TBODY>
<TR>
<TD vAlign=center align=left width=360>
<H1 id=L_defaultr_2 style="FONT: 13pt/15pt verdana; COLOR: #000000"><ID id=L_defaultr_3><!--Problem-->The page cannot be displayed
</ID></H1></TD></TR>
<TR>
<TD width=400 colSpan=2><FONT id=L_defaultr_4
style="FONT: 8pt/11pt verdana; COLOR: #000000"><ID id=L_defaultr_5><B>Explanation: </B>There is a problem with the page you are trying to reach and it cannot be displayed.</ID></FONT></TD></TR>
<TR>
<TD width=400 colSpan=2><FONT id=L_defaultr_6
style="FONT: 8pt/11pt verdana; COLOR: #000000">
<HR color=#c0c0c0 noShade>
<P id=L_defaultr_7><B>Try the following:</B></P>
<UL>
<LI id=L_defaultr_8><B>Refresh page:</B> Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion.
<LI id=L_defaultr_9><B>Check spelling:</B> Check that you typed the Web page address correctly. The address may have been mistyped.
<LI id=L_defaultr_10><B>Access from a link:</B> If there is a link to the page you are looking for, try accessing the page from that link.
</UL>
<HR color=#c0c0c0 noShade>
<P id=L_defaultr_11>Technical Information (for support personnel)</P>
<UL>
<LI id=L_defaultr_12>Error Code: 400 Bad Request. The data is invalid. (13)
</UL></FONT></TD></TR></TBODY></TABLE></BODY></HTML> -
Discussion Service is not working after the upgrade to 11.1.1.2
Hello,
We have built our custom webcenter application using webcenter framework 11.1.1.1, our application uses out-of-the-box webcenter services like discussions, announcements, and etc. After the upgrade to the new Patch Set 1 (11.1.1.2) the discussion service stopped authenticating the logged in users, however it works for anonymous users.
We are still in the development phase, therefore all the registrations of webcenter services with our application don't use WS-Security. Please advice and thanks in advance .
Best regards,
HasanPlease let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh.. -
Lighting cables and adapters are not working after the last iOS 7 update.
Looking for some help from Apple here. After the last iOS 7 update, some of my lightning cables and adapters have stopped working.
I have an iPhone 5 funning iOS 7.0.2.
I have a car charger/FM RF transmitter that has worked like a charm for years. Because none of these have been made with a lighting connector, I've had a genuine Apple adapter on it since I bought my iPhone 5 a year ago. Never had a problem until the last iOS update. Now when I plug it in, not connection is registered. I've verified the charger is working by removing the adapter and plugging the old iPhone connecting into an iPhone 4 running iOS 6. I've also verified the adapter is working by plugging the charger with adapter into an iPad mini running iOS 6.
I also have a Belkin USB car charger. This came with a black lighting cable. Also worked like a charm until the last update. Now, half the file when I plug it in, no conncetion is registered. The other half of the time, it says this cable is not supported but does not connect my phone or charge it. I've also verified that the cable is working by plugging it into an iPad mini running iOS 6.I had the same bug. Powering off the phone and back on resolved the issue
-
The key board is not working after the upgrade
after the actualization of the operative system O7 the keyboard doesn´t work?
Settings>General>Reset>Reset All Settings
Reset All Settings does not delete anything, all it does is take most of the iPad's settings back to default (with the exception of accounts setting, and maybe a couple other things.) It is perfectly safe.
The only inconvenience is that you have to go back through almost all your settings and set them to your preference. -
ITS is not working after the Upgrade to SAP ECC 6.0
Hi Folks
ITS is not working as it supposed to be after upgrading to SAP ECC 6.0
When I try to connect thru ITS i m getting HTTP 404 and HTTP 500 Errors
Can some one throw some ideas.
But web AS is running perfectly alright.
Thanks
JayHi Priya,
You need to Implement the following SNOTE's for these changes.
Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
Tax Surcharge Rate
Increase in Conveyance Allowance
Section 80
Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
2139208 - Union Budget Changes – 2015
2138605 - Sec80C: Sukanya Samriddhi Scheme
Upcoming Developments:
PF Admin Charges Revision
Professional Tax for Mizoram & Nagaland states
Average Rate of Tax
Regards,
Venkat Polisetty -
Insert in Tabular form does not work after the upgrade to APEX 4.0
Hi all,
Thx in advance for looking into the issue.
We are running into following issue when we upgraded APEX 3.2 to APEX 4.02
1) The Tabular form insert does not work.
2) We are fatching the value of the Global variable APEX_APPLICATION.g_XXXX in a procedure and we get null for this value after submit for new row to be inserted.
The tabular form was working fine in APEX 3.2.
The Update and Delete works just fine.
Any help in this regard is highly appreciated.
Thx and regards,
MaheshHere is my workaround to get the ADDROW/SUBMIT working again if you have a legacy Tabular Form:
1 PAGE ATTRIBUTES
JAVASCRIPT
FUNCTION AND GLOBAL VARIABLE DECLARATION
var htmldb_delete_message='"DELETE_CONFIRM_MSG"';
2 DELETE BUTTON
ACTION WHEN BUTTON CLICKED
URL Target change to
javascript:apex.confirm(htmldb_delete_message,'MULTI_ROW_DELETE');
3 ADDROW BUTTON
ACTION WHEN BUTTON CLICKED
Action
redirect to URL
URL Target
javascript:addRow();
4 PROCESS
APPLYMRU (activitated by button ADDROW)
CONDITION
never or delete
5 PROCESS
ADDROWS
CONDITION
never or delete
6 CHANGE PAGE TEMPLATE to e.g. THEME 13 One Level Tabs.
7 IF YOU WANT ADD FUNCTIONALITY TO GOTO BOTTOM OF PAGE AFTER ADDROW
1. In the page footer put <a name="bottom_of_page"></a>
2. Amend the action when the "ADD" button is clicked to scroll down to the new region by doing the following:
- edit "ADD" button
- Go to "Action when button Clicked" section
- Amend "URL Target" from
javascript:addRow();
to
javascript:addRow();window.location='#bottom_of_page' ;
regards
PaulP -
Xl Reporter does not work after the upgrade to 2007A PL 47
Hi Experts
UPgraded to 2007A PL 47 from 2005A. Upgrade was done successfully. However the XL reporter is
not functioning. When you go to Tools and click on XL reporter nothing happens. No error message
comes up even.
Client is using SQL 2005 MS server 2003
I ahve done the test upgarde in an image of the live server
thank you
Regards
Aosara
Edited by: Apsara Senaratna on Feb 10, 2010 4:33 AMHi Thannga
The answer is no.
I believe when i logon to SAP add on at the bottom of the menu it should come up " connecting Addon: XL reporter" (i get this on other dB's when connecting to SAP)
Could this be related to the environment. As other than this there was no issues with the Upgrade.
Thank you
Regards
Apsara -
Apps Not Working after the Lollipop Upgrade on the Galaxy Note 4.
I did the lollipop upgrade on my Galaxy Note 4 and now I cannot get my Yahoo mail app or my GEICO app the work. I have uninstalled both apps and reinstalled them to no avail. Any help would be greatly appreciated.
Certainly understand the importance of applications Markjen2525! What happened when you uninstalled the apps and then resinstalled them? Are they giving you any error messages? Please share details, thanks!
KristieQ_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
I had somebody work on my OS 10.9.2 to speed it up. He failed and now Preview, Textedit, App Store, Mail (crashes) and Contacts do not work anymore. I can still use Safari, Firefox, Word, Photoshop and iPhoto etc. How do I get the Apple programs fixed again?
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo). -
My iMessage and facetime is not working after updating to ios 7...
Any answers on how to fix it? I've tried to restart, restore connected to itunes, but nothing.ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367
Maybe you are looking for
-
Hi, Through which table and field , we can know that a sales order is cancelled? I need to give this information to technical consultant for making the report.So that cancelled sales order wont be displayed in the report. regards, sathya
-
Exporting and importing table using R3trans program between 2 clients
Hi, How to export and import a table between to clients in a same system using R3trans program? I need to copy a table from Client 020 in a system to client 040 of the same system using R3 trans. I need to know the procedure. Can any one advice Regar
-
Hi, I have a 13" MacBook Air, Mid 2013. I am really worried about dropping my MacBook and breaking it. I am looking for a reasonably priced have duty case, like the ones that snap on to it and I have full flexibility of the hinge and that. Could anyo
-
I downloaded an album, but each song will start for a few seconds and then stop and either start over or go to next song. Can I delete the album and download it again without paying again?
-
I have the iPhone 4, how do I update to the IOS 5?
Where do I go to update my iPhone 4, to the IOS 5? Please be specific, I'm confused!