Phone buttons lights up

Good morning,
I have a E52 and he lights al day up,the 2 volume buttons on the side of the phone,the 2 selection buttons and the 2 phone buttons(red&green),and the screen is on you see the light on the side of the screen,he is stil black but you can see he is turned on).
The phone is working normal and down everything you ask,but the batteries is empty after 3 day's because the light is always on.
There is no message or missed call,so i don't see what the problem is.
When you push a button the phone gets complete out and after a few minutes the light is there.
I don't now what to do.Is there anybody that can help me with this??
Thanks a lot
Ed

@wupie
Although you would need to backup essential data first, you could always try resetting your E52 to "Out of box" state by keying in *#7370# folowed by 12345 (default Nokia lock code unless altered by user) in case of any software corruption.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

Change phone off light style

Hi All
I have a Sony Ericssion xperia mini phone. When I click on phone shut down button lightly, then screen is off (screen lock) . Initially it something similar to tv off. i.e in certer of the screen become bright light line when i click on shut down button. but now it is not like that. I want to get bright line in the center of the screen when i click on shut down button.
Please any advice.
thank you

No problem.

Start and back button lights not on

Ever since I got my phone, the lights around the back/start/search buttons has never cone on. I am not sure what settings I should adjust to get the light on. Pls assist.

In addition, Lumia 521and 625 phones don't have key illumination too.

Callers can't hear me and I can't hear them, speaker button lights up when I pick up the call?

i noticed this problem last night
when someone calls me i can't hear them and they can't hear me.
my mic works fine on voice notes, and I tried calls through viber and they worked fine too.
when I pick up the phone the speaker button lights up without me tapping it?
i tried the whole plug/unplug earphone jack thing but it didn't work. neither did blowing it.
i also deleted the last app I downloaded then restarted my iPhone twice.
i also updated the latest ios.
please give suggestions.

Hello there, Brigit.
The following Knowledge Base article offers up some great links to articles that help with troubleshooting your issue with calls on your iOS device:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Of particular use to you, will be this section:
Acoustic-speaker/microphone/receiver
Find troubleshooting steps for:
No sound or distorted sound from speaker
Microphone issues
Receiver issues
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Button lights work intermittently

Button lights on bottom of Droid X Motorola only work intermittently. Phone is 10 months old. Is there a quick fix?
Redrider

Thanks I think that may have fixed it. It is not a hard case but a slip in leather with a magnet which also causes the car dock to come on sometimes but did not think about the lights. Thanks for replying.

The blue LED power button light has gone out

The blue LED power button light has gone out. Model a4316f. How do I replace?

Hello @deargle,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the power button LED on your desktop computer has gone out, and I would be happy to guide you towards a resolution!
Since there are no available replacement options on HP Parts Surfer for replacing the LED light, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Speakers phone button issues

my iphone 4 os 7.0.4 when i try to make phone call the speaker phone button automatically comes on. but there is no sound and no one can hear me. same thing when phone call comes in the speaker phone lights up but no sound with it on or off. sound works perfect for everything else. i can touch botton to turn off and back on but does no good
help please

there are no devices paired via bluetooth. i do not even turn my bluetooth on. Also in the accessibilities features there are no buttons turned on. This is the main puzzler. I can listen to music, hear the sounds on apps and games and videos. but when i try to make a call the speaker button is on automatically and there is no sound. I can turn it off in during the call and still have no ound, also the person on the other end can not hear anything at all from me. Also when i try to cal my voicemail its the same thing.the timer on the top of the calls steadily counts but noone can hear me and i cant hear them or voicemail. I did however go to the genious bar on 1/21/2013. and when I first got there and hour and half early it was still haing issues but then when I showed back up for my appointment at 230, my phone decided to work properly for few minutes then the issue started again. So he went in and tapped the reset all settings button. well once that finished it worked again. So i asked if it does it again what do i do and he showed me the same thing. Well here's still the problem. I have reset the setting about 5 times since yesterday. and still have the speakerphone button lighting up and no sound on incoming and outgoing calls and voicemail only. So he also said to try a total restore and start back over from factory setting, ok so I have now done that also. So now what else is there to do to maybe fix this issue. I have not had good help even from the apple Genious bar.
please help if possible

Error while updating phone button template in CUCM 8.6

Experts,
I'm getting following error while updating phone button template in CUCM 8.6;
Update failed. java.sql.SQLException: System catalog (sysprocbody) corrupted.
Please check the screen shot attached here with.
What could be the reason?
Thanks
Vivek

I'm not a Cisco employee, so I can't do anything with your backup.!
You need to take a backup as a precaution (You should have been doing this anyway) Then you need to call Cisco TAC to get the underlying problem fixed. CalManager is a locked-down environment, and only TAC can get the low-level access needed to fix database problems.
GTG

Why cant I add contacts on the iphone4? the mail contacts calendars button unders settings, the contacts button, the add a contacts button under message and the phone button will not work to add a contact.

Why cant I add contacts on the iphone4? the mail contacts calendars button unders settings, the contacts button, the add a contacts button under message and the phone button will not work to add a contact.

Have you attempted a restore?

Deactivate phone buttons in IC_agent

Hi,
How I can deactivate phone buttons in business role IC_agent?
I can not find necessary entries in function profile WBAR.
Denis.

Hongyan,
Yes, I use profile: ICCMP_BP_SEARCH/BuPaSearchB2B
Button 'Reset' is accessible only then I start to search business partners.
I dont see button 'reset' after I finded or after I confirmed business partner.
I see these buttons (initial state):
Search account, Reset, Clear, New.
After confirmation or after then I find partner (before confirm) I see these button:
Confirm, Save (dark), Cancel (Dark), Related, Edit, Clear
I can not see button Reset!
Why?
Denis.

How can I sync my photo contents in iPhoto on my iMac to my new iPAD's iPhoto? I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but I cannot find "phone button" under Device name on iTunes page. Please help! Thanks!

I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help! Thanks!
I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto. However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD.
So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info. That means no syncing....
I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
I am puzzled. I appreciate for your advice and help.
Thank you!

It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
And then on the right-hand side :

Button Templates in database not shwn in CUCM admin Phone Button Templates

Hi,
I was looking around the database of CUCM (v8.6), and i have found some gap between the 'phonetamplate' table and the "Phone Button Templates" page. Following items are not shown in the front-end:
StandardCN622
Standard_Cisco_TelePresence_400
Standard_Cisco_TelePresence_200
Standard_Cisco_TelePresence
Standard Usage Profile
Default VGC Virtual Phone Template
Is this normal behavior? Is there any explanation why?

Hi Anthony,
I think there was device pack installed (cmterm-devicepack8.5.1.14059-1.cop).
How does it explain the gap?
admin:show version active
Active Master Version: 8.6.2.23900-10
Active Version Installed Software Options:
cmterm-8961.9-1-1SR1.cop
cmterm-7937-1-4-5-7-SCCP.cop
cmterm-9951.9-1-2.cop
po-locale-de_DE-9.3.3.1000-1.cop
cmterm-7945_7965-sccp.8-3-5.cop
cmterm-9971.9-3-4-24.cop
cmterm-9971.9-0-09-2dev.cop
cmterm-dx650.10-0-2-24.cop
cmterm-8941_8945-sccp.9-3-4-17.cop
cmterm-7945_7965-sip.9-3-1SR2-1.cop
cm-locale-de_DE-8.6.2.1000-1.cop
cmterm-7945_7965-sccp.9-3-1SR1-1.cop
cmterm-7945_7965-sip.9-3-1SR1-1.cop
cmterm-9951.9-0-1SR1.cop
cmterm-9951.9-0-4.cop
cmterm-69xx-sccp.9-2-2-6.cop
cmterm-7925-sccp.1-3-4SR1.cop
cmterm-9951.9-0-1SBE-10.cop
cmterm-9971.9-3-2SR1-1.cop
cmterm-7942_7962-sccp.9-2-1.cop
cmterm-8961.9-3-1-33.cop
cmterm-7940-7960-sccp.8-1-2.cop
cmterm-9951.9-1-1SR1.cop
cmterm-8961.9-0-1SBE-10.cop
cmterm-roundtable-901-super-7.cop
cmterm-8961.9-3-4-24.cop
cmterm-9971.9-0-3.cop
cmterm-7945_7965-sccp.9-3-1SR2-1.cop
cmterm-9951.9-0-09-2dev.cop
cmterm-69xx-sccp.9-0-2-s.cop
po-locale-zh_CN-9.1.1.1000-1.cop
cmterm-8961.9-0-4.cop
cmterm-9971.9-1-2.cop
ciscocm.refresh_upgrade_v1.1.cop
cmterm-9971-repartition-all.cop
cmterm-9971-repartition-4.cop
cmterm-7945_7965-sccp.9-1-1SR1.cop
cmterm-devicepack8.5.1.14059-1.cop
cmterm-8961.9-3-2-10.cop
cmterm-9971.9-0-4.cop
cmterm-69xx-sccp.9-1-1-sr2.cop
cmterm-9971.9-2-2.cop
cmterm-9971.9-0-0-46dev.cop
cmterm-7945_7965-sccp.9-0-2SR2.cop
cmterm-9971.9-0-1SBE-10.cop
cm-locale-hu_HU-8.5.1.2100-1.cop
cmterm-8961.9-1-2.cop
cmterm-bfcp-e.8-6-2.cop

7941 Phone Button template on CCM 4.2(3)

Hello,
Has anyone got an overflow error message when trying to ad the customized 7941 phone template on CCM 4.2(3) devpack 3.3?
By default, the standard 7941 phone button template come with 1 Lone and one speed dial, but our environment here need a two-lines phone. While ny other model can have several version customized button templates but no 7941. Please kindly sugest on what I should check in order to acheive adding the 7941 phone button template.

Hello all,
I have let the TAC engineer and Developers took care over the case and they solved this issue for me already. The problem is a missing of line 2 record in standard 7941 Phonebutton SQL table. If you already have your case opened please refer the case number 604361587 to your TAC engineer so he/she can contact the one that took care over my case for the solution.

My iPhone 3G phone button no longer works. If I push it I get a black screen for a few seconds then back to the home screen. Everything else is ok. Any ideas how to fix this?

The phone button on my iPhone 3G no longer works. Everything else on the iPhone works fine. I can receive incoming calls. I can make calls directly from Contacts. But if I press the phone button I get a blank white screen for a few seconds then it goes back to the home screen. I've tried the hard reset and also restoring orignall settings via iTunes but keep getting the same problem. Does anyone know how to fix this?
Thank you, Neil.

Thanks for the advice but I've tried resetting network settings and also the reset by pressing home and sleep buttons until getting the Apple logo. Still have the same problem. To be clear (because I mistakenly typed black instead of blank in the title to this thread): If I press the phone button I get a BLANK WHITE screen for a few seconds then it goes back to the home screen. I doubt it's the SIM card as I can receive calls and make them directly from contacts. What I can't do is view my favourite numbers or missed calls or access my voicemail, i.e. all the things you get to via pressing the phone button.

Phone buttons not work when charging

I have Nokia Lumia 900..   When I hook the phone to the charger, the phone is disabled... you can't push up the wallpaper to use the phone buttons on the start screen. If you disconnect it from the charger, it works fine. I have done a hard phone reset and it has been updated to the lastest update available for the phone. The hard reset did not help... . Some one here said that it should not be doing that... it should be working on or off the charger. I talked to AT&T who is my phone provider and they say that this is normal... that while it is on the charger, it is disabled.
   So, Nokia, is this normal or is this a defect??? If I need to use the phone, I have to disconnect from the charger, use the phone and then plug back in. I don't like phone being disabled...  Nokia, if this is not supposed to happen, I will need something to show AT&T in order to get phone replaced ... or is there a place I can take phone to in order to get replaced or fixed where I do not have to leave the phone.. I need my phone..
   ALSO, something I do NOT like about the phone and am more convinced that I need to change to a different phone when my year with this phone is up... I do NOT like that you can't save info from your phone onto the Sim Card.. this is crazy... Why would you make a phone you can't back up your info onto a Sim card... I may not always be at a computer... This should be fixed... You should be able to move information from the phone to the sim card and move the sim card to the phone... I know you can move stuff to the phone from the sim card, but I want the function of moving to the sim card also.
      But right now.. I need to know if this phone being disabled when on the charger is a defect or is it supposed to do that...
thank you
Barbara

I haven't tried different locations.. I will try that next time I need to charge the phone. I usually plug into electricity because it charges faster than connecting to pc. I bought a second data cable for charging the phone and most of the time, I use it when charging. If I charge at night, I use the one that came with the phone and hook to electricity... I keep one cable in bedroom and one in living room near computer ... and most of the time, am charging in living room... The only time I hook to computer is when I need to do phone update or if I want to transfer a pic to the phone for wallpaper or to attach to person's number ... Or I have added ringtone.    I will try the other cable and will try when connected to pc.   I do know that the cable I use to charge it in living room doesnt work to do update on phone.. I had to use the original cable to do the update the other day.   If this orginal cable goes bad (which we all know happens) how do I get another original cable that will do my updates with? the second cable I bought was supposed to be for Nokia lumia 900...
Anyway.. thanks.. will try and check when I recharge again and report back.
have a great day
thanks for response

Phone buttons lights up

Similar Messages

Maybe you are looking for